10moons графический планшет драйвера linux

10moons графический планшет драйвера linux

Dear customers:
Thank you very much for purchasing our products.
If you have any problems about using,Please feel free to contact us, we will give you the best after-sales service.
Contact E-mail: 10moons@10moons.com

Thank You

Driver Download

• Windows Driver Link：For Windows7/8/8.1/10(All 32/64bit System)
• Mac Driver Link：For Mac OS 10.7-10.15

Panit Tool SAI Download

Driver install Guide

Frequently Asked Questions

10moons Graphic Tablet Frequently Asked Questions, if you can’t solve your problem, please contact E-mail: fangx@10moons.com

Solution of delayed problem

1. In windows 7 system,please turn off [ flicks ] function. Only Windows 7 system need to do this.

2. If there is delay in using photoshop software.
For this question, please refer to the FAQ page with PhotoShop software, which contains detailed solutions.
3.If there is delay in using Paint Tool SAI software.
For this question, please refer to the FAQ page with Paint Tool SAI software, which contains detailed solutions.
4.If there is delay in using non-professional painting software.
Some software such as Paint software of windows system or others(PPT/PDF/AI. ) does not require pressure-sensing function (usually only use the mouse to operate)，there may be occur delays phenomenon.
Please open the pan setting interface,find the [ Standard mouse mode ] option,tick the check box. Then it can be solved.

Delays in using Paint Tool SAI software

Please follow the list to troubleshoot the possibility of problems
1.Graph Tablet Drivers does not install.
Download link: http://proxy.vsf123.com/down_apk/down/ name=fangx&itemid=DzzzzzzNqZv
2.Make sure the Driver icon is on the task bar.Otherwise, Graph Tablet can not work properly.

3.Confirm whether tick the [ standard mouse mode ] Option
Cancel the check box tick! Please.

4.Don’t use ghost versions of Windows system.
The windows system of Ghost versions may be simplified,the function of the system required for Graph Tablet may be eliminated.
5.Paint Tool SAI software may have some bugs.You can download different versions from the official website .
Official website:http://www.systemax.jp/en/

PhotoShop may encounter problem

Use PhotoShop software, may encounter the following problems
1.Can’t to draw lines in PhotoShop
Windows XP / Windows 7 system, Please use PhotoShop CS6 or higher version.
Windows 8 or higher version system, please use PhotoShop CC version.
2.If there is delay in using Photoshop software
User maybe opened the [ Use graphic processor ] option in PhotoShop setup.If the PC does not have a high-performance CPU and graphics card hardware to support it, this feature can cause a delay in the use of photoshop.
Solution：Open the PhotoShop, [ Edit ]->[ preferences ]->[ performance ], find the [ Use of graphics processor ]option ,cancel the check box tick,click [ OK ] ,then restart the PhotoShop.

3.Brushes in photoshop software without pressure
Follow these steps to operate:
a.Make sure that the previously driver of the different Graph Tablet devices has been uninstall.
b.Reinstall the 1060plus Graph Tablet driver again.
c.Restart the computer.
Open photoshop software once again，Press F5 key to open the brush setting panel.Tick the check box on [ Transfer ] options，then select [ Pen Pressure ] in [ control ] Option.

Solution of the abnormal pen pressure

About the abnormal pen pressure
In pen setting interface,the pen does not touch theGraph Tablet，but the pressure curve becomes a straight line and the level of pressure above zero. This indicates that the pressure of the pen may be abnormal.

Solution：
Please use the nib removal tool to remove the nib,replace the pen nib as follows:

If the problem remains the same, please remove the nib once again, tap the pen on the desk several times, and then insert the nib once again,then use the pen drawing at tablet.
At this moment,please observe the pressure curve:
1. If the pressure curve becomes a straight line and at 0 position,that means the pressure of pen is working properly.
2. If the pressure curve is falling, but not at 0 position,try it several more times according to the above method,let the pressure curve drop to zero. Pressure curve line in the location of the 0，the Pen pressure can only be work normally.

Other

Set custom shortcuts

Computer start waiting for a long time
After the Graph Tablet is connected to the PC, if the computer takes a long time to enter the windows system.
Please enter the Bios Settings，Find the [ First Boot Device ] option, don’t select [ CDROM ] devices,then Save and Exit it ,Will solve this problem.

Some times there is a cursor jitters when using the pen
Graph Tablet use the electromagnetic induction principle to work，if there is a device with strong magnetic working nearby，there is a electromagnetic interference may occur. Such as laptop power, various mobile phone charger power, mobile phone，power adapter,as so on. All of them are electromagnetic interference devices. Please don’t let these devices get close to Graph Tablet, which can effectively avoid the interference.And the laptop is the device that with a strong electromagnetism, so don’t put Graph Tablet on the keyboard of your laptop to draw pictures,that it very important.
How to replace the pen nib

Android Phone connection

Before connecting the Android device, please make the device default direction (Phone please make it vertical), Then turn off the screen rotation function. refer picture. This is important.

After connect the phone. then the Android tablet and graphic tablet rotate -90° at the same time. refer picture.

Mac settings

Please follow the picture step to setup the Mac OS.
Then to check it if can work properly or not.
1.Enter your MAC OS Setup. Find the Security & Privacy Option.
2.click the unlock option.
3.Allow The MyTabletDaemon (Hook √)

Источник

Графические планшеты для linux

Гугл противоречив, кто-то пишет, что у wacom нет линуксовых драйверов (но они, вроде бы, помогают в разработке открытых драйверов), кто-то пишет что это самые безгеморройные планшеты, кто-то нахваливает huion. Есть ли среди лоровцев пользователи графических планшетов и что они могут посоветовать?

Cast wst

Владелец Wacom Bamboo Pen reporting in.

Любой современный дистрибутив подхватывает без проблем, GIMP / MyPaint / Krita видят сразу.

Когда пробовал (лет пять назад), помню, не работало стирание обратной стороной pen-а.

У вакома для подавляющего большинства девайсов официальные драйвера заапстримленные в ядро и иксы, поэтому вакомы обычно работают из коробки. Слышал что есть проблемы с беспроводными модулями, но говорят и под оффтопиком с ними геморрой. С мобильной студией тоже говорят были проблемы, но это уже не планшет, а компьютер.

Со всеми остальными производителями нужно выяснять для каждого девайса отдельно. Что-то поддерживается вакомовскими дровами, что-то имеет свои дрова в ядре, что-то имеет фанатские дрова в digimend.

У вакома обычно накручены цены, если правильно выбрать не-вакомовский планшет, то по идее можно знатно сэкономить.

У меня валяется wacom bamboo, замечательно работал изкоробки даже под FreeBSD.

Я в целом мимокрокодил и своего планшета не имею, т.к. мне он без надобности, но имею некоторый опыт общения с пользователями графических планшетов.

Если кратко: нормально работают только планшеты wacom. Иногда нужно поплясать с бубном, но в целом работают даже надежнее чем в винде. На самом деле, драйвера устройств wacom под винду это своеобразный мем. В целом же wacom это переплата за бренд.

Некоторые модели huion можно заставить работать под линуксом, но плясать с бубном придется существенно дольше. С остальными производителями все так же печально.

Но повторюсь, что лично не использовал, доверять моему мнению не стоит.

в том же thinkpad x201t был wacom и отлично работал, даже удалось порисовать 2d-тян в mypaint’е.

Genius — говно, хорошую вещь Huion-ом не назовут, так что Wacom без вариантов.

Да, как заметили. XPpen работает, но требует стороннего модуля ядра, который пока не в апстриме.

У многих других не-wacom так же.

Да нет — на жониусе можно было рисовать вполне, но из той же убунты студии всё не ваком было просто выкинуто. Помню знатно позанимался киберсексом с wizardpen linux тогда, потом плюнул и купил простенький бамбук за 80 баксов.

Я заявляю, все работаает из коробки.

ну я уже говорил — покупайте вакомные доски для нарезки колбасы и буит вам щастье. Чсх они опять что то бюджетное и компактное выкатили, но пока на оное денех нет, может попозжа куплю в пару к ноуту, ато даже бамбук стал громоздкий.

линуксовые драйвера есть, официальная поддержка библиотек есть, я работаю в скульптинге и кадах, задавай вопросы

Источник

10moons графический планшет драйвера linux

Simple driver for 10moons T503 tablet for linux

Driver which provides basic functionality for 10moons T503 tablet:

• 4 buttons on the tablet itself
• Correct X and Y positioning
• Pressure sensitivity

Tablet has 4096 levels in both axes and 2047 levels of pressure.

Clone or download this repository.

Then install all dependencies listed in requirements.txt file either using python virtual environments or not.

Connect tablet to your computer and then run driver.py file with sudo privileges.

You need to connect your tablet and run the driver prior to launching a drawing software otherwise the device will not be recognized by it.

Configuration of the driver placed in config.yaml file.

You may need to change the vendor_id and the product_id but I’m not sure (You device can have the same values as mine, but if it is not you can run the lsusb command to find yours).

Buttons assigned from in the order from left to right. You can assign to them any button on the keyboard and their combinations separating them with a plus (+) sign.

To list all the possible key codes you may run:

Buttons on the pen itself do not work and hence not specified. I don’t know if it’s the issue only on my device or it’s a common problem.

About

Simple driver for 10moons T503 tablet for linux

Источник

10moons графический планшет драйвера linux

Simple driver for 10moons T503 tablet for linux

Driver which provides basic functionality for 10moons T503 tablet:

• 4 buttons on the tablet itself
• Top button of the pen
• Correct X and Y positioning
• Pressure sensitivity

This tablet has 4096 levels in both axes and 2047 levels of pressure.

Clone or download this repository.

Then install all dependencies listed in requirements.txt file either using python virtual environments or not.

Connect tablet to your computer and then run driver.py file with sudo privileges.

You need to connect your tablet and run the driver prior to launching a drawing software otherwise the device will not be recognized by it.

Configuration of the driver placed in config.yaml file.

You may need to change the vendor_id and the product_id but I’m not sure (You device can have the same values as mine, but if it is not you can run the lsusb command to find yours).

Buttons assigned in the order: tablet (from left to right) then stylus (from upper to bottom). You can assign to them any ecode prefixed by BTN_ and their combinations separating them with a plus (+) sign.

To list all the possible key ecodes you may run:

I forked this repository from https://github.com/alex-s-v/10moons-driver.git, and then I fixed some bugs and removed the features that doesn’t work in my tablet and I didn’t need (and so didn’t waste time searching about).

I spent too much time searching about and trying to fix these bugs, and this webpage was the most helpful for me, maybe it helps you too someday: https://www.kernel.org/doc/Documentation/input/event-codes.txt

• It appears that only BTN prefixed ecodes can be emitted for the buttons (EV_KEY);
• When the bottom button of the pen is pressed, the driver crashes and you need to reconnect the tablet in the USB and then restart the driver.

About

Simple driver for 10moons T503 tablet for linux

Источник