Acer aspire v5 572g mac os

Acer V5-572 On Mojave

CPU：Intel(R) Core(TM) 7 Series i5-3337U @ 1.80GHz Ivy Bridge HM77
Cores : 2 Cores, 4 Threads @ 1796MHz Bus: 24MHz FSB: 96MHz
RAM : 2x4096Mb HibernateMode: 0
显卡：HD4000 ID:0x01660009 /Nvidia GT750m
以太网卡：RTL8168
无线网卡：BCM94352
声卡：ALC282

Clover version: v4895
ProductName : Mac OS X 10.14.3 BuildVersion: 18D109
Bootargs=kext-dev-mode=1 dart=0 slide=0 nv_disable=1 -alcbeta -cdfon -igfxnohdmi igfxcflbklt=1 enable-cfl-backlight-fix

2019-04-06: OTA update to 10.14.4

核显开启QE/CI Metal 独显Bios屏蔽
声卡
有线网卡
Wi-Fi + 蓝牙
USB识别.供电.睡眠.速率
电池电量显示
原生电源管理.CPU变频
触控板(不支持三指以上手势)
EDID注入,开启HIDPI
Continuity
偶尔蓝牙固件升级失败导致蓝牙WI-FI失效
Wi-Fi使用键盘Fn+F3关闭后无法再开启
键盘自定义DSDT补丁实现Fn+<>调节亮度
HDMI连接内屏花屏,无音频输出
笔记本风扇(无风扇传感器)
开机第二阶段闪屏

. 安装请使用config-install.plist

安装中出现的 IOConsoleUsers: time(0) 0->0, lin 0, llk 1, IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, nov 0, sm 0x0

安装后无法进入系统,显示kext stall AppleApcicpu

重启进入RecoveryHD,打开终端,进入系统分区 cd /volumes/mac/system/library/Extensions或者/library/Extensions

kextcache -i /volumes/mac

BrcmPatchRAM2:can be installed either through Clover kext injection or placed in /Library/Extensions on 10.11 and later.
BrcmFirmwareRepo.kext: Install to /Library/Extensions (on 10.11 and later). This kext is much more memory efficient than BrcmFirmwareData.kext and is the preferred configuration.BrcmFirmwareRepo.kext does not work with Clover kext injection, unless using a device specific firmware injector.

Читайте также: Color picker для mac os

检测到Apple Watch，并尝试用Apple Watch解锁，但是菊花转了半天后出现了密码的输入框

注入id3,27,127均失败
添加参数开启debug模式,重启
终端输入: log show —predicate ‘process == «kernel» AND (eventMessage CONTAINS «AppleALC» )’ —style syslog —source
输出: (kernel) AppleALC: init @ automatically disabling on an unsupported operating system
添加 -alcdbg -liludbg
输出: (kernel) AppleALC: alc @ failed to obtain device info for analog controller (1)
怀疑没有加载AppleHDA
输入: kextstat | grep ‘Lilu\|AppleALC\|AppleHDA’
clover/acpi添加 fix HPET
重启加载成功

1.SSDT-PNLF.aml in ACPI/patched

2. AppleBacklightFixup.kext installed to /L/E

通过hacktool查看USB信息,查找需要的端口,确定是USB2还是3,一些硬件需要改成内建以保证睡眠及唤醒的正常使用(控制端口数量在10个之内)

端口	设备
hp15	usb2
hp21	摄像头内建
hp23	蓝牙内建
hs02	usb2
ss01	usb3

完成后导出kext安装到l/d以及ssdt文件复制到clover/acpi/patched，删除usbenjectall.kext 取消usb重命名补丁
添加FakePCIID.kext和FakePCIID_XHCIMux.kext: 使用AppleUSBEHCI而不是AppleUSBXHCI来控制USB2(也许可以解决偶尔蓝牙无法识别的问题)
重启后,usb供电正常,usb3速度5g

开机按 F2 进入 BIOS 界面，按下 Tab 和 Fn 组合键，接着按 Ctrl+Alt+Del 组合键重启。

在开机画面继续按 F2 进入 BIOS 界面，此时 Advanced 和 Power 两个高级选项卡开启了。

进入 Advanced 选项卡，在 Video Configuration 中将Special Features改为Disabled，将Graphic Mode由 switchable为Integrated ，最后将 PCI Express Graphic 改为 Disable

Источник

Acer aspire v5 572g mac os

Добрый день . Ребята подскажите с чего начать ремонт .
В ноутбуках шарю плохо, в основном телефоны.

Попал этот аппарат ко мне в руки залитым. Пролили воду на клавиатуру, следов коррозии и окислений нет не где .
Старт есть но чёрный экран.
При зажатии фн + еск реагирует и начинает моргать индикатор питания , прошивка биос не помогла . Прошивал программатор ом обе флешки .
В какую сторону копать подскажите .. за ранее спасибо .

Вопрос по схожей модели:

Имеется V5-573PG с тачскрином поверх дисплея AUO B156HAN01.2. Дисплей сдох. Тач-стекло мне вообще не нужно и я хочу поставить вместо него пластиковую рамку part number EAZRT00401A. Подойдет ли она к текущей задней крышке или ее тоже придется покупать?

Добрый день, проблема: клавиатура с подсветкой моргает

Ссылка на то, как происходит процесс моргания клавиатуры: https://radikal.ru/video/9BtB0sA56SF

Происходит это, как понимаю, только когда ноутбук сильно чем-то нагружен. Во время обычного сидения в браузере, либо создании документов ничего не происходит, но как стоит зайти в доту, так что сразу такая проблема появляется. До этого мне чинили пару месяцев назад клавиатуру и заменяли кнопку, ибо сломана была. В связи с этим там всё вытаскивали и заново собирали. Возможно ли, что мастер криво что-то поставил? Потому что у меня в первый день после того, как забрал ноутбук сразу такое началось, но в более лояльном виде, например, пару раз моргнёт и всё хорошо. А такое началось буквально вчера.

Источник

Installation of El Capitan on Acer V5 572G

sunny01331

Let me start off by saying that I am very new to this and have only been working on this for a week.

I am having a very hard time getting the installation of 10.11 to even start. I’ve tried many suggestions, including creating the USB disk with Unibeast using UEFI, which would give me the «no» sign when trying to boot, eventually I tried using -v and Nv_disable=1, which would just lead to different errors, like «couldn’t allocate runtime area» or panic CPU 0 callers, or just crashes that would reboot the whole system. I’ve even tried booting with Legacy boot USB and settings in my BIOS which just gave me the panic error again. The farthest I can get is the apple logo before some error occurs.

I just need help because I’m new, from what I understand, this should have a good chance of working because of the compatible CPU, and I’ve heard of other users getting this laptop to work, but it’s not popular enough to have a proper guide on it.

Please help me out, I’m determined to get this working, thanks!

Specs:
i5 3337U
6gb ram
Intel graphics
Nvidia 720M

RehabMan

Moderator

Let me start off by saying that I am very new to this and have only been working on this for a week.

Please help me out, I’m determined to get this working, thanks!

Specs:
i5 3337U
6gb ram
Intel graphics
Nvidia 720M

Follow the Clover guide linked from the FAQ.

sunny01331

Okay thank you, I have followed the instructions exactly as mentioned in the laptop specific guide. i have managed to get farther, but now I’m getting a «Still waiting for root device» issue with garbled text and the «no» symbol in the center screen. I have tried everything I can think of using cpu=1, tried all of the 1366×768 config.plist files for HD4000, I even tried making a legacy boot USB, but the same problem always occered. Please someone point me in the right direction. See the attached pictures for my exact errors.

Please i would appreciate any help at all i am really determined to get this working. Thank you.

Источник

[Guide] 10.11 on Acer Aspire V5-572p Laptop with Clover UEFI

mslily

1. This guide is for laptop with specification as below:
a. CPU: intel i5-3337U
b. RAM: 12GB
c. SSD: 500GB, Samsung 850 EVO + 20GB mSATA
d. Video adapter: intel HD Graphics 4000
e. Wlan+BT: Broadcom BCM94352HMB (wlan ID: 0x14e4: 0x43b1, BT ID: 0x0a5c: 0x21fb)
f. HD WebCam: Suyin Corp, 0x064e: 0xe330 (internal USB2.0 interface)
g. Touchscreen: Resolution 1920×1080, Elan Micro, 0x04f3: 0x0125
h. Audio: Realtek HDA 282 (ID: 0x10ec: 0x0282)
i. Ethernet: Realtek PCIe (ID: 0x10ec: 0x8168)
j. USB port: Two USB 2.0 ports on left and right sites, and one USB 3.0 port at the back site

2. Notes:
a. Reason for update to El Capitan (10.11)
This laptop was tuned to install Mac OS X 10.9 years ago and works very well (See http://www.tonymacx86.com/mavericks. 9-installation-guide-acer-v5-572p-6858-a.html). Since it works so well, I didn’t spend time to update to 10.10 (Yosemite).

The reason for this update is:
Touchscreen support
More recent apache2 and PHP version (If you are not a MAMP user, it doesn’t matter for you)
Other features Apple mentioned like screen split etc

b. Expectation from 10.11 after this installation
Did not work: Bluetooth detected and looks work fine, but cannot find devices

Work: Didn’t test thoroughly but I didn’t find anything else not working. Touchscreen does not support multi-touch, but function as mouse and full screen writing (setting in ink), actually pretty useful.

c. If your part(s) are not same as above, don’t use the patches related (see details at the end of this guide)

d. Don’t forget to backup your current system.

3. Installation
a. Make installation USB with Clover boot (details in http://www.tonymacx86.com/yosemite-. de-booting-os-x-installer-laptops-clover.html)
Download “Install OS X El Capitan.app” from AppStore

Install clover to USB (>=16GB) with GPT partition
diskutil partitionDisk /dev/disk1 1 GPT HFS+J «install_osx» R
(change disk1 to yours identified by “diskutil list”)

Download clover installer http://sourceforge.net/projects/cloverefiboot/ and install to the installation USB. Clover will be install to the hidden EFI partition on this installation USB. To access this EFI partition, in terminal
Diskutil list (check your USB location, like disk1, disk2, …)
mkdir /Volumes/X
sudo mount –t msdos /dev/disk1s1 /Volumes/X/ (replace disk1s1 to yours)

The EFI partition will be mounted and show on your desktop. Navigate to it and delete:
/EFI/CLOVER/config.plist
/EFI/CLOVER/ACPI/ (delete this folder)
/EFI/CLOVER/drivers64UEFI/ (delete this folder)
/EFI/CLOVER/kexts/ (delete this folder)

Download the attached “Install_EFI.zip” file, unzip and copy all to the /EFI/CLOVER folder to replace those deleted files

b. To install:
Unplug any unnecessary for installation, like external monitor or USB devices

Plug the installation USB into the back site USB 3.0 port.

If you are going to install onto external USB hard drive, you are recommended to use a USB3.0 hub connecting to the back site USB 3.0 port, so you can plug both the USB hard drive and installation USB to the hub. (Installing into internal HDD/SSD will be much faster)

Access your BIOS and make changes same as I mentioned http://www.tonymacx86.com/mavericks. 9-installation-guide-acer-v5-572p-6858-a.html to make sure you could boot from USB/EFI. If you have installed Mac OS X 10.9 before, there is nothing to worry about.

Restart computer and hit F12 to select boot from the installation USB. You should have no problem to finish the installation. For me it takes about 15mins

As instructed by the installation procedure, restart computer, boot from installation USB again but select the just installed Mac OS X partition to boot up.

Finish the account setting

4. Post-installation fix
a. Install CLOVER EFI boot to HDD/SSD
I assume you have installed Mac OS X before and know how to do that. If not, please check around or see my previous post (http://www.tonymacx86.com/mavericks. 9-installation-guide-acer-v5-572p-6858-a.html)

If you have Clover EFI installed before, rename it like “BOOT.old” and “CLOVER.old”, then copy the BOOT and CLOVER folders from EFI partition of the Installation USB into the HDD/SSD EFI partition

Remove Installation USB and check if you can boot new OS X from HDD/SSD

b. Simple patches for laptop with same hardware specifications.
Download the attached “patches.zip” and unzip

Install all the kexts file in “patches.zip” to /S/L/E with “Kext wizard”. (Don’t forget to select “Backup kexts that will be replaced” so you will keep a native kext copy)

Use “Kext wizard” to repair permissions and rebuild cache.

Replace /EFI/CLOVER/config.plist as attached

Replace /EFI/CLOVER/ACPI/patched/SSDT-1.aml and SSDT-2.aml
Delete all files under /EFI/CLOVER/kexts/10.11/

Delete all files under /EFI/CLOVER/kexts/Other/

Restart computer and you should be good to go

c. For Laptops that have slightly different hardware, you may want to know which patches to choose as below:

Audio:
Use the attached AppleHDA.kext (patched, same as 10.9. we should patch a new version, but works)

Config.plist patch includes:
(DSDT patches)

Comment
HPET fix V5-572G bios v2.09
Find

X1VJRAAIQlVGMBERCg4=

Replace

QlVGMBEXChQiAAEiAQA=

Comment
HDEF fix V5-572x bios v2.09
Find

X1BSVwCkEgYCCg0=

Replace

X1BSVwCkEgYCCgk=

(Devices inject)
Audio

Inject
28

Wireless+BT
BrcmPatchRAM2.kext (rehabman)

IOBluetootchFamily.kext /Contents/Plugins/BroadcomBluetoothHostControllerUSBTransport.kext/Contents/Info.plist
0a5c_21fb

CFBundleIdentifier
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
IOClass
BroadcomBluetoothHostControllerUSBTransport
IOProviderClass
IOUSBHostDevice
idProduct
8699
idVendor
2652

(Without this change, Handoff and hot spot won’t be enabled)

config.plist patches includes:
FakeID

WIFI
0x43b114E4

(kexts and patches)

Comment
10.11-BCM94352-5GHz-US-FCC-dv
Find

QYP8/3QsSA==

Name
AirPortBrcm4360
Replace

ZscGVVPrKw==

Comment
10.11-BCM94352-Airport-Extreme
Find

axAAAHUN

Name
AirPortBrcm4360
Replace

axAAAJCQ

Comment
10.11-BT4LE-Handoff-Hotspot-lisai9093
Find

SIX/dEdIiwc=

Name
IOBluetoothFamily
Replace

Qb4PAAAA60Q=

Comment
10.11-BCM94352-Whitelest-0x4331-iMac14,3
Find

TWFjLUM2RUZBNjM5NjJGQzZFQTA=

Name
AirPortBrcm4360
Replace

TWFjLTI3QURCQjdCNENFRThFNjE=

Comment
10.11-BCM94352-Whitelest-0x4353-MacBoolAir5,2
Find

TWFjLUM2RUZBNjM5NjJGQzZFQTA=

Name
AirPortBrcm4360
Replace

TWFjLTI3QURCQjdCNENFRThFNjE=

IO80211Family.kext (Need to inject Id)
IONameMatch

pci14e4,43b1

Keyboard+touchpad+brightness control:
Check previous post. Need VoodooPS2Controller.kext + config.plist patches

Touchscreen + HD Webcam + Bluetooth + USB 2.0 port:
This is the trickiest part. We need to first patch DSDT in config.plist as below:

Comment
EHC2 [to] EH02
Find

RUhDMg==

Replace

RUgwMg==

Comment
EHC1 [to] EH01
Find

RUhDMQ==

Replace

RUgwMQ==

Comment
Windows to Darwin
Find

V2luZG93cyAyMDEz

Replace

RGFyd2lu

Then we have to use software “IORegistryExplorer” to find out your specific layout. I have made the patch for Acer aspire V5-572p-6858, but I guess it will work for all V5-572x model. Check the attached USBXHCI_V5572x.kext for details

When you use IORegistryExplorer, you need to find out what’s under EH01, EH02 (or EHCI1, EHCI2), and XHCI. If you have same layout as mine show below, you are good to go.

Источник

Acer aspire v5 572g mac os

Как установить Mac OS на Acer Aspire V3-571g

Процесс установки Mac OS хакинтош на Aspire v3 571g (завод WiFi)

Таблица совместимости карт wifi в Хакинтош

Acer aspire v5 572g mac os

Acer aspire v5 572g mac os

Installation of El Capitan on Acer V5 572G

sunny01331

RehabMan

Moderator

sunny01331

[Guide] 10.11 on Acer Aspire V5-572p Laptop with Clover UEFI

mslily