How to Activate Windows 10 for free using CMD (without key)

A vast majority of people operate their computers using Windows 10. No wonder, it is one of most widely used operating systems available out there. But, the fact that its original version is slightly expensive to purchase. Most users don’t buy the Windows 10 Activation key and keep using it with the irritating Watermark present at the bottom. Even though there are retailers who will offer you a Windows 10 activation key for a discounted price, but, won’t it be amazing if we tell you the Windows 10 activation hack so that you can bypass Windows 10 activation easily.

Hence, after a bit of research, we did find some Windows 10 activation script that can do the job. Thus, if you want to learn how to activate Windows 10 with cmd and make it genuine, stick around this article and read it until the end.

How to activate Windows for Free?

If by any chance you have made up your mind to go and buy a genuine copy of Windows 10, you will end up hurting your pockets a little bit. Instead of doing that, we suggest you read the article until the end and learn how to activate Windows 10 with cmd without key. There are plenty of ways which you can try to bypass Windows 10 activation. But, our aim is to provide you with the most straightforward methods possible while keeping the complexity away.

While you look at other sources on the internet, they might provide you with a Windows 10 key for a discounted price. But, what if we tell you there is no need to spend money for an activation key. Especially when you can learn How to activate Windows for Free. Yes, there are other methods as well. For instance, the easiest of them to do is execute an activate Windows command line.

How to Activate Windows 10 with cmd?

For this method, we are going to use a “Windows 10 activation batch file” or say Windows 10 activation script. This is a working Windows 10 bypass Activation method; thus, you can apply this method on any of your computers and activate Windows 10 with cmd without key. But, make sure to follow each step correctly to ensure the safety of your system.

Step 1: Launch Notepad on your computer.

Step 2: Now, you will need to copy the below entire Windows activation script to bypass Windows 10 activation on your PC.

Step 3: After you have copied the Windows activation script, paste it into the notepad file.

Step 4: Now, we will need to save this file. Make sure you keep it as a .cmd or .bat file. No matter you save it as a cmd file or make a Windows 10 activation batch file from it. Both will do the job.

Step 5: Now, all you need to do is run the “Windows 10 Activation batch file” as Administrator. If you don’t run it as the Administrator, the method might not work correctly.

Step 6: It will automatically open the “Activate Windows 10 cmd” on screen and start processing the code.

Step 7: Lastly, after the completion of the process, close the cmd file and restart your computer.

How to Remove Activate Windows 10 Watermark?

We just discussed the most straightforward method on how to activate Windows for free. But, there are many more legit ways that can help you to remove Activate Windows 10 Watermark. While some of the methods are another Windows 10 Activation hacks, some ways are legit and legal too. Thus, if you are interested to know those other ways as well, you can review our article of How to Remove Activate Windows Watermark in detail.

Conclusion

In case you are also struggling to get an original version of Windows 10 for your PC. You can use this method as this article does help you to learn how to activate Windows 10 with cmd without a key and make it genuine. Hence, if this “Activate Windows command line” allows you to bypass Windows 10 activation on your PC, do let us know. Apart from that, if you are facing any issues while using this method or have any queries, feel free to ask us in the comments section below.

I spend my time exploring different ways to harness IOT in life. If I’m not working on any projects, I’m travelling to the place for another challenge.

Activate windows using cmd

Большинство пользователей операционной системы Windows рано или поздно сталкиваются с активацией продукта. Активация помогает убедиться, что Ваша копия Windows является подлинной и не нарушает условия лицензионного соглашения на использование программного обеспечения Майкрософт.

Ниже рассмотрим пошаговую инструкцию по активации Windows через командную строку.

1. Для начала необходимо запустить командную строку

Для Windows 7:
Меню «Пуск» -> «Все программы» -> «Стандартные» -> «Командная строка» (кликаем правой кнопкой мыши, в контекстном меню выбираем «Запуск от имени администратора»).

Для Windows 8 и 8.1:
Меню «Пуск» -> вводим на клавиатуре CMD и нажимаем ENTER -> «Командная строка» (кликаем правой кнопкой мыши, в контекстном меню выбираем «Запуск от имени администратора»).

Для Windows 10:
Кликаем правой кнопкой мыши на меню «Пуск» и выбираем «Командная строка (администратор)»

Если возникли трудности, переходим на рабочий стол и нажимаем на клавиатуре комбинацию клавиш Windows+S. Далее в строке поиска вводим CMD или «Командная строка». Кликаем по найденному варианту правой кнопкой мыши и выбираем «Запуск от имени администратора».

1. Далее в командной строке вводим команду slmgr.vbs /upk. чтобы удалить старый ключ. Нажимаем ENTER.

Если удаление ключа Windows 7, 8/8.1, 10 прошло успешно, появится следующее сообщение:

Если Вы активируете свою операционную систему впервые, данное действие можно пропустить.

1. На следующем этапе в командной строке вводим:
   slmgr.vbs /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (где «XXXXX» – ключ продукта Windows 7, 8/8.1, 10).
   Например: slmgr.vbs /ipk ZTRMK-4LWYT-ABR51-AK3EE-LKD5X.
   Далее нажимаем клавишу ENTER, на экране появится сообщение, что установка ключа прошла успешно.
2. Вводим slmgr.vbs /ato для активации системы. Перезагружаем компьютер.

Для того чтобы проверить, получилось ли активировать Windows 7, 8/8.1, 10, запускаем снова командную строку от имени администратора и вводим по порядку следующие команды:
slmgr.vbs /dli -> ENTER (информация о лицензии);
slmgr.vbs /xpr -> ENTER (дата, когда лицензия истечет);
slmgr.vbs /dlv -> ENTER (подробные сведения о лицензии).

В некоторых случаях проблема сопровождается при использовании пиратского программного обеспечения. В таком случае рекомендуем в целях безопасности Ваших данных приобрести и установить официальный Windows 10. Ознакомиться с ассортиментом операционных систем можно на следующей странице https://software-empire.ru/catalog/windows/.

Если после ввода оригинального ключа и закрытия технических моментов проблема не ушла, свяжитесь с нашим отделом поддержки (для клиентов интернет-магазина Software Empire).

How to Activate Windows 10 FREE With CMD [Updated 2020]

Should You Upgrade or Purchase Windows 10 Product key

How to Activate Windows 10 Legally Free

Activate Windows 10 with CMD (Without Activator)

Comments

Thank you so much. I did it all without problems. But when I check using slmgr.vbs /xpr it said it will expire 22-01-2021 1:01:36. I use the win 10 pro serial here.

Thanks for your feedback. Don’t worry its permanent activation… please share with your friends.

thanks! got it to work with win 10 pro! what organization is it talking about? will it cost problems later?

Great! it worked. Thanks for the solution!

Which version of Windows 10 you are currently using and pleas make sure to copy and use exact same product key

Got the same error: «Error 0xC004F074 The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted.»

I made sure to re-run step 4 and still get this error»

Even after the date to which the server was updated?

I can’t believe that actually worked lol
Thanks

2 ways to activate Windows 10 for FREE without additional software

As you know, Microsoft notified Windows 10 is “the last version of Windows” and explained that they will be focused on the development of powerful and new features under the guise of software updates instead of building a new version. This means there will be no Windows 11 or 12 in the future. So if you are thinking about an upgrade, this is the best time to get it.

Windows 10 free upgrade

The representative of Microsoft has confirmed that Windows 10 is a free upgrade for all customers using a genuine copy of Windows 7 or higher. But this offer officially will expire on this Friday so do not hesitate to own it before it is too late. Your time is running out. After July 29, the upgrade will cost up to $119 for Home edition or $199 for Professional one. Personally, that amount of money is enough to pay my rent this month so there are no reason for me to deny that.

Should you upgrade to Windows 10

“Do not upgrade to Windows 10”. This seems to contradict the above analysis but that is the statement of security experts. They said that Microsoft has been violating users’s privacy from collecting their personal information like gender, age, hobby and Internet habits… without your permission. The options relating to sending feedback and data to Microsoft were enabled automatically from the moment that you installed Windows 10 successfully so most people don’t know about them. However, you can disable them in Settings/Privacy easily.

Install Windows 10 using ISO file instead of an upgrade

You can get the latest version of Windows 10 Professional here if you don’t have it already. If you have ever installed any versions of Windows before, I am sure you will have no difficulty getting started with Windows 10. If you are looking to install it with an USB flash drive, please consult the video “How to create a bootable USB stick”. The following are the detailed instructions for installing Windows 10.

Activate Windows 10 without using any software

If you are using another version of Windows, please navigate to Windows OS category and select a suitable article.

Method 1: Manual activation

Time needed:В 1 minute.

Run KMS commands on command prompt.

Open Command Prompt as administrator.

Click on the start button, search for “cmd” then run it with administrator rights.

Install KMS client key

Use the command “slmgr /ipk yourlicensekey” to install a license key (yourlicensekey is the activation key that corresponds to your Windows edition). The following is the list of Windows 10 Volume license keys.

Home: TX9XD-98N7V-6WMQ6-BX7FG-H8Q99
Home N: 3KHY7-WNT83-DGQKR-F7HPR-844BM
Home Single Language: 7HNRX-D7KGG-3K4RQ-4WPJ4-YTDFH
Home Country Specific: PVMJN-6DFY6-9CCP6-7BKTT-D3WVR
Professional: W269N-WFGWX-YVC9B-4J6C9-T83GX
Professional N: MH37W-N47XK-V7XM9-C7227-GCQG9
Education: NW6C2-QMPVW-D7KKK-3GKT6-VCFB2
Education N: 2WH4N-8QGBV-H22JP-CT43Q-MDWWJ
Enterprise: NPPR9-FWDCX-D2C8J-H872K-2YT43
Enterprise N: DPH2V-TTNVB-4X9Q3-TJR4H-KHJW4

(Note: You need to hit [Enter] key to execute commands.)

Use the command “slmgr /skms kms8.msguides.com” to connect to my KMS server.

Activate your Windows

The last step is to activate your Windows using the command “slmgr /ato”.

Now check the activation status again.

Method 2: Using a batch file

This one is not recommend anymore due to the new update of Microsoft.

Step 1: Copy the code below into a new text document.

Create a new text document.

Step 2: Paste the code into the text file. Then save it as a batch file (named “1click.cmd”).

Save the text file Set name of the batch file

Step 3: Run the batch file as administrator.

Run the batch script with admin rights

Please wait a minute.

Your Windows is activated

Note: If you guys see three times the same error message saying that the connection to KMS server was unsuccessful, please read this post.