Add legacy hardware windows 10

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

General discussion

You might have noticed that the old ‘Add Legacy Hardware’ option seems to be missing. I tend to use this quite a bit whenever I need to add in a Loopback adapter or some piece of hardware that is not quite installing correctly.

With that said, thankfully, you can still manually launch the ‘Add Legacy Hardware’ Control Panel applet by using hdwwiz.exe. http://blog.tiensivu.com/aaron/ ** https://mvp.support.microsoft.com/profile/Aaron.Tiensivu

All replies

You might have noticed that the old ‘Add Legacy Hardware’ option seems to be missing. I tend to use this quite a bit whenever I need to add in a Loopback adapter or some piece of hardware that is not quite installing correctly.

With that said, thankfully, you can still manually launch the ‘Add Legacy Hardware’ Control Panel applet by using hdwwiz.exe. http://blog.tiensivu.com/aaron/ ** https://mvp.support.microsoft.com/profile/Aaron.Tiensivu

I know this article was written just after the release of Windows7.

At this moment, there is «Add Legacy Hardware» option available without installing an applet.

You can go from Start Menu > Right click on Computer > Administrative (G) > Device Manager.

Plug your device then «Add Legacy Hardware» option will be available on the Actions menu.

How to Add a Legacy Hardware on Windows 10

It’s nothing new but you might be looking for a way out to Add a Legacy Hardware on Windows 10. Microsoft loads the drivers for most of the legacy devices before handing over the users but some of them need to be installed manually. The users can rather easily perform this task from Device Manager.

What is Legacy Hardware?

Legacy is a word earmarked for the hardware once manufactured. This one is comparatively less functional as well as older than the new one. Usually, we consider an older version as a legacy program. For example, while setting up the current version of an MS Office on a new computer where you were using Office 2000, the earlier will be legacy software. In the same way, if you have upgraded your modem to V.92, V.90 is legacy hardware in this case.

Microsoft puts the preloaded drivers which are equally effective for the legacy hardware such as a keyboard, mouse, printers as well as Infrared ports. These lack plug and play option and system use them for legacy devices only. But some of them have executable drivers too. In that case, you need to install those drivers manually using Device Manager.

How to Add a Legacy Hardware on Windows 10

Device manager is the tool that lets you Add a Legacy Hardware in Windows 10 with multiple methods. Follow one after another –

Step-1: Perform a click on the Cortana search bar, type devmgmt, and then Press Enter.

Step-2: Select the Device name to which you want to add Legacy Hardware. Go to the menu bar, make a click on “Action” tab. Choose “Add Legacy hardware” option from the dropdown menu.

Step-3: Select “Next” from Add hardware wizard in order to move forward.

Automatic Update to Legacy Hardware

Step-4: From popup, select “Search for and install the hardware automatically (Recommended)” to let the windows searching for the driver over the internet and install by itself and hit the “Next” button.

If it is available on the manufacturer website the system will take a few minutes and add the Legacy Hardware.

Manual Installation

All the divers are kept in the system files at different locations. This method will manually install the available legacy hardware from your system.

Step-5: Click on the round cell against the second option “Install the hardware that I manually select from a list (Advanced)” and hit “Next”.

Hit a click on “Show All devices” option and select “Next”.

The subsequent window will retrieve a list of all the devices. Choose “Manufacturer” from the left box and “Model” of your hardware from the right and click on Next.

To Start installing the hardware hit the Next button.

Add a Legacy Hardware on Windows 10 using disk

If you have the legacy hardware on disk or USB or flash drive then the device manager also provides a tool to add.

• Pick a device from the list on the device manager console and press Action followed by Add Legacy Hardware on the top menu bar.
• Click on Next on the coming window and afterward select the round cell before the later choice Install the hardware that I manually select from a list (Advanced).
• Under Common hardware type, choose Show All Devices and press Next.
• Insert the disk having the legacy driver software into DVD Drive and select the Device from Manufacturer box.
• Do a click on Have Disk. choose the appropriate drive, and select OK.

• Finally, click on OK moreover Next twice on the subsequent window respectively to start the installation.

When you have stored the driver file on your PC

Sometimes you might copy the driver file on your system from the disk or download from the web. In this condition, click on Have Disk and then on Browse.

• Choose the driver having .inf extension and hit the “Open “option.
• The will show the drivers listed in the package. Select the one you want to proceed with and click “Next” to continue.
• Choose “Install” option from Windows security once prompts for permission.
• In next few seconds, When the Installation finishes successfully, select “Finish”. Checklist of drivers in the Device Manager to see the new one is added.

That’s all about the ways to Add a Legacy Hardware on Windows 10

Add legacy hardware windows 10

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

General discussion

You might have noticed that the old ‘Add Legacy Hardware’ option seems to be missing. I tend to use this quite a bit whenever I need to add in a Loopback adapter or some piece of hardware that is not quite installing correctly.

With that said, thankfully, you can still manually launch the ‘Add Legacy Hardware’ Control Panel applet by using hdwwiz.exe. http://blog.tiensivu.com/aaron/ ** https://mvp.support.microsoft.com/profile/Aaron.Tiensivu

All replies

You might have noticed that the old ‘Add Legacy Hardware’ option seems to be missing. I tend to use this quite a bit whenever I need to add in a Loopback adapter or some piece of hardware that is not quite installing correctly.

With that said, thankfully, you can still manually launch the ‘Add Legacy Hardware’ Control Panel applet by using hdwwiz.exe. http://blog.tiensivu.com/aaron/ ** https://mvp.support.microsoft.com/profile/Aaron.Tiensivu

I know this article was written just after the release of Windows7.

At this moment, there is «Add Legacy Hardware» option available without installing an applet.

You can go from Start Menu > Right click on Computer > Administrative (G) > Device Manager.

Plug your device then «Add Legacy Hardware» option will be available on the Actions menu.

How to: Install and Update Hardware Drivers in Windows 10

Technical Level : Intermediate

Summary
Windows 10 continues the tradition of hardware compatibility by providing support for a vast collection of devices available within the Windows ecosystem. Hardware detection in particular is an important part of the out of the box experience. Driver software which makes this happen, allows your hardware to function by communicating with the operating system. In this article, we take a look at installing and updating drivers in Windows 10.

Details

I recently installed Windows 10 on an HP Elitebook to see how well the most recent Windows 10 build performs. The Elitebook is a fairly recent model notebook which includes an assortment of hardware technologies. Out of the box though I did not get a complete system, for instance the Intel HD Graphics 3000 was not detected and I was instead limited to the Microsoft Basic Display Adapter.

Apart from this, I had wi-fi ready, which mean, I could connect to the Internet right away.

Installing drivers through Windows Update

Windows Update is the premier starting point to resolve most common driver issues you might experience immediately after installing Windows 10.

Simply launch it from Start > Settings > Update and Recovery and click Check for Updates

Press Windows key + R

Type: ms-settings:windowsupdate

Click Check for updates (make sure you have an active Internet connection).

Immediately, Windows Update will detect your system configuration and download all the appropriate drivers for your system. As you can see in the above screenshot, my Intel HD 3000 Graphics was installed automatically. I did not even have to reboot the system. In addition to other hardware components were also detected and installed which includes my LAN adapter and card reader.

Important Drivers you should get after installing Windows 10.

When you perform a new install or upgrade, you should download the latest software drivers from the manufacturers website for your computer model. Important drivers include: Chipset, Video, Audio and Network (Ethernet/Wireless). For laptops, make sure you download the latest Touch Pad drivers. There are other drivers you will probably need, but you can often download these through Windows Update after have a working Internet connection setup.

How to find and download drivers from the manufacturers website:

Drivers can normally be found in the Support section from the manufacturers website where you will find a Software and Drivers sub-section. The method to find it will vary depending on the brand. You can go to your favorite search engine then enter the following query «model and make drivers download’ example: ‘hp 8460p drivers download’. This will often provide a direct link.

Normally, you might not find native Windows 10 drivers. If this is the case, use the latest Windows drivers available for your model. So if they only have Windows 7 drivers, try using those. Make sure you download the right drivers for your architecture (32 or 64 bit).

Proceed to download the appropriate drivers after selecting your version of Windows. The manufacturer might list two versions of the driver, always choose the latest.

Again, the procedures will vary, but as long as you can find the drivers and download section, normally available within Support, you should be able to get to the drivers. If you are reading this before upgrading, try having the essential drivers in advance.

Install drivers using Device Manager

If your driver was not detected or installed by Windows Update, you can try installing the driver manually if you have a compatible version. Windows 10 and previous versions of Windows such as Windows 7 share the same driver model, so it should work.

Press Windows key + X

Click Device Manager

Once device manager is open, select the device, right click it and click Update Driver Software

This will launch the update driver software wizard, which presents two options.

• Search automatically for updated driver software — its possible Windows might have the driver software if you have not checked it yet, if its taking too long, then the next option is usually best.
• Browse my computer for driver software — if there is a compatible driver and you already have the driver files, then all you need to do is point to it and Windows automatically install it for you.

Here I have selected to use an existing driver, browse to where the driver is located on your computer, whether that is a partition, network share, thumbdrvie or install disc. Make sure the option to Include subfolders is checked.

Click Next and wait while the wizard completes the installation.

Using Compatibility Mode to Resolve Driver problems

If both Windows Update and driver update prove unsuccessful, the next option is Troubleshoot Compatibility. Troubleshoot Compatibility provides a simple way to make older drivers work under modern versions of Windows by making the driver believe it is being installed on a supported version of Windows.

The first thing you need to do is point where the setup files are located. If you are installing from a thumb drive or CD/DVD. Launch File Explorer (Windows key + E) and open the location where the setup files are stored.

Right click the setup file for the program, this can be designated as setup.exe or something similar. Click Troubleshoot Compatibility

This will launch the Program Compatibility Troubleshooter wizard which will check for issues.

Select the option “Troubleshoot program”

Depending on the problems you are experiencing when attempting to install or use the software, check off the problems. In my case:

• ‘The program worked in earlier versions of Windows but won’t install or run now’
• The program requires additional permissions.

Select a version of Windows the program is known to work in. I notice the program works great in Windows Vista (with Service Pack 2), so I will select that option. Click Next

Proceed to run the through the programs setup routine by clicking Test the program….

Follow the on screen instructions to install the program as you normally would.

If all is successful, click the option at the end of the wizard ‘Yes, save these settings for this program’

Wait while your settings for the program are saved.

If you have a driver such as your video card automatically installing upon completion of installation and checking for Windows Update, try disabling automatic driver installation using the instructions in the following thread:

Go to the hardware developers website, download the appropriate driver for your model then install in compatibility mode using the instructions above.

How to install your printer:

Was this article helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this article?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this article?

Thanks for your feedback.

Comments (163) 

* Please try a lower page number.

* Please enter only numbers.

* Please try a lower page number.

* Please enter only numbers.

87 people found this comment helpful

Was this comment helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this comment?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this comment?

Thanks for your feedback.

Thanks for the effort.

Lots of detail here.

Unfortunately, none of this worked.

Windows Update does not find any new drivers and wuapp.exe does not even seem to exist in Windows 10 Preview.

Trying to load the latest driver according to the Intel Driver Update Utility gives an error message that the hardware does not meet minimum specifications. Given that this is the Dell M6800 and there are no higher hardware specifications, that must mean some other problem.

Finally, there appears to have been an Intel Windows 10 Beta driver for the HD4600, but it’s not accessible from the Intel website and Windows Update does not load it.

169 people found this comment helpful

Was this comment helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this comment?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this comment?

Thanks for your feedback.

JurekNowak, I have the same issue as you. I have a Dell Inspiron 6000 currently running Windows 7 Professional 32bit, and my display adapter is the ATI X300 with 128mb. Its a strong laptop even though it is close to 10 years old, I run a SSD, and upgraded a ton of things like the RAM and Wifi, Windows 7 even rates my system a 3.5.

When I tried to install Windows 10 technical preview, it ran great on this laptop, even smoother and quicker than Windows 7 in every way, with exception of the video. HD video would constantly skip and run very poorly because I was limited to the Microsoft generic display driver. Compatibility tweaks to the driver setup do not work!

No matter what actions I took, I could not install my ATI drivers that I was using in Windows 7. Since the system is 10 years old, Dell/AMD most likely is not going to provide any support for an updated driver. I haven’t ran the most recent version of Win 10 technical preview (last one I tried was 9926 I think), but I doubt there was a workaround created to allow older drivers to be accepted by this new OS.

I’m going to image my current hard drive and allow the Windows 10 update to install once it is ready this month. If a fix isn’t in the cards, I will be rolling back my system to Windows 7.

Some people might just say buy a new computer, but I really don’t need to. This system does everything I need it to do, and with upgrade options to go SSD, why drop $400 on even a basic laptop that doesn’t come close to the r/w speeds of my current system. I really hope Microsoft has come up with a workaround. I understand they make the most amount of money of the mainstream, but I am also a strong believer in Microsoft products and really enjoyed using the technical preview version of Windows 10 for a few weeks. Guess all I can do is keep my fingers crossed and hope for the best.

#windows10 #win10 #windowsx #microsoft #pleasefix