Bay Window Repair and Window Glass Replacement

Bay windows are chosen by homeowners for their architectural style (inside and outside) and for the light they allow into a home. A typical bay window extends out from a home and is made of multiple windows.

Because of the nature of their construction, bay windows are as, if not more, susceptible to the same problems as standard windows. At Glass Doctor®, we repair bay windows by replacing their standard and double pane glass units.

Read on to learn more about bay window glass replacement and bay window repair.

Need emergency bay window glass replacement? Don’t wait. Call 833-974-0209 for 24/7 emergency service.

Why Do Homeowners Choose to Replace Their Bay Windows?

Homeowners choose to replace their bay windows for a variety of reasons. From aesthetic preferences to safety concerns, there’s no wrong reason to replace your home’s standard or bay windows.

• Energy efficiency
• Safety
• Style
• Defects or failure
• Age

Why Do Bay Windows Fail?

A bay window is a significant investment. Made of multiple windowpanes and engineered to extend outside the home. Like standard windows, bay windows fall victim to frame problems, breaking and cracking, leaks and condensation. These issues compound with age, material choice and location.

However, unlike standard windows that sit flush with a wall, bay windows overhang an exterior wall and are vulnerable to damage from above and below. Bay windows are also inherently more susceptible to shifting or warping. Remember – any damage to a window frame, including shifting or warping, will impact how the windowpane fits within the frame.

For these reasons, it’s important to choose a reputable vendor, like your local Glass Doctor, to install or to replace any damaged panes in your bay window. Fortunately, many damaged or broken bay windows may be repaired by replacing one or more of the affected windowpanes.

Upgrade Your Bay Windows to Save Money

If you’re replacing some glass in your bay window, consider upgrading your glass to save money on energy bills or to stabilize the temperature in your home. Installing advanced glass options, such as IGUs (insulated glass units) and Low-E windows, can also cut down on noise pollution and increase property value.

Bay Window Repair

Bay window repair typically requires replacement of one or more of the glass panes. Replacing a windowpane is often the more cost-effective solution than replacing the entire window.

To perform a bay window glass replacement, your local Glass Doctor will:

1. Remove the old affected windowpane in its entirety.
2. Prepare the space for a new window by removing any dirt and debris, repairing or replacing any damaged lumber or material, making the opening level and square and potentially removing nearby siding pieces.
3. Install the new windowpane using the manufacturer-recommended hardware, adjusting with shims as necessary to ensure the pane is plumb and square.
4. Replace caulk, trim and casing, installing additional insulation and re-installing any siding.

Your local Glass Doctor technician will determine whether your bay window may be repaired via glass pane replacement or if it is time for an entirely new window.

Choose Glass Doctor for Bay Window Glass Replacement

Trust Glass Doctor to repair your bay windows quickly and efficiently with professional bay window glass replacement. Our emergency services are available 24/7 to restore peace of mind. Call 833-974-0209 today or request an appointment online to get started.

Bay Windows vs. Bow Windows: Which is right for you?

Want to make your room feel larger or let more light in? Keep reading to learn more about bay windows, bow windows and how to make the right choice for your home.

What are Bay Windows?

A bay window is a custom addition that protrudes from the side of your house. Bay windows consist of three separate windows joined together in either a square, rectangular, hexagonal or octagonal shape. Bay windows can be installed at angles between 90 and 150 degrees from the house, so the exact design of your bay window depends on the characteristics of your home and the desired look.

Bay windows can add floor space to the interior of your home and are an excellent choice if you want to add a window seat or bench. In most installations, the window panes in a bay window are far enough apart to allow for each window to open.

What are Bow Windows?
Bow windows are a made up of four or more casement windows fitted together to create a rounded window structure. Bow windows were a popular feature in Victorian homes and can lend a classic appearance to any space. Most window companies will agree that bow windows are often more complicated to install than a regular casement window, and need to be well insulated to keep out the cold.

Bow windows are a great option if you’re looking for a way to let more light in or want to create a corner window. Bow windows can also be fitted with window seats, but because of the number of glass panes and their proximity to each other, the windows in a bow window construction typically can’t be opened.

What are the Key Differences?
The main differences between bay windows and bow windows are the number of glass panes, and their ability to open. While bay windows are typically made up of three panes—all of which can be made to open, bow windows generally consist of four or five panes of fixed glass which don’t open.

Are Customized Options Available?
Both bay windows and bow windows allow for a wide range of customization. With hundreds of different window styles, shapes and materials to choose from, you can create a beautiful window that’s seamlessly suited to your home.

To learn more about the different types of windows and the customizations available, visit an All-West Glass location today. We have locations all across Alberta, BC, Northwest Territories and Yukon. We’re your source for residential, commercial and automotive windows and glass. Contact us to learn more about our services, or to schedule an appointment.

Does Your Home Require Bay Windows or Bow Windows?

Our experts can help you decide what would be suitable for your beautiful home- Bay windows or Bow windows.

Windows that bring comfort

Locally made energy efficient and noise blocking windows and doors. From measuring and manufacturing to installation and decoration.

Locally made product

• Australian standards compliance
• UV stabilized profile
• Quickest lead times in Melbourne
• Less chance of damaging in transit
• Supply chain quality control
• High stock of spare parts
• No delays caused by external parties
• Ability to quickly rectify force majors
• Low carbon footprint
• Keeping jobs ashore

How do I get my new windows?

It only takes 3 easy steps! Windows Republic is committed to delivering every project in a quick, efficient and hassle free manner. Sit back, relax and let us take the worry off you!

FREE MEASURE AND QUOTE

Products

WINDOWS SLIDING DOORS SIDE HUNG DOORS

• — Thermally efficient, UV stabilised, life long lasting frames
• — Triple Glazed configuration is available
• — Argon gas in between glass panes as standard
• — Low-E glass in every IGU as standard
• — Flyscreens available
• — Toughened safety glass as standard

• — Anti-Noise uPVC Windows
• — Will reduce your street noise by up to 70%
• — Acoustically enhanced glass
• — Range of impressive R values
• — Officially tested by SCIRO in an acoustic laboratory
• — Flyscreens available

• — Clever lift and slide mechanism for ultimate thermal efficiency
• — Multiple in-frame locking points
• — Flat bottom seal

• — Popular choice for upgrading your single glazed sliding doors
• — Easy to operate
• — Most affordable solution

• — Perfect for balconies and deck areas
• — Inwards or outwards opening
• — Double doors option (no middle mullion)
• — uPVC or flat Aluminium bottom seal

• — Can be fitted with cat/doggy doors
• — Glass or uPVC panels for different looks
• — Inwards or outwards opening

Standing out from the crowd

• EXCEPTIONAL QUALITY EXCEEDING AUSTRALIAN STANDARDS
• BEST COST/PERFORMANCE RATIO IN MELBOURNE
• HONEST ADVISE BASED ON EXPERIENCE AND BEST INDUSTRY PRACTICES
• QUICKEST LEAD TIMES IN MELBOURNE
• PROFESSIONAL, PUNCTUAL AND RELIABLE “IN HOUSE” INSTALLERS
• HUNDREDS OF SUCCESSFULLY COMPLETED PROJECTS IN MELBOURNE, VICTORIA AND TASMANIA

• YOUR TIME WASTED ON “PUSHY” SALES
• RIDICULOUS DISCOUNTS DUE TO INFLATED MARGINS
• EXPERIENCE DELAYS DUE TO INTERNATIONAL SHIPMENTS
• PROMISES THAT WE CAN’T BE DELIVERED
• NO “COWBOYS” TO CUT COSTS
• WE DON’T DISAPPEAR AFTER THE FINAL PAYMENT

What our customers have to say

For builders and commercial projects

All our products are fully compliant with

Australian Standards (AS2047)

Style windows to match your design aspirations

CLASSIC RESIDENTIAL STYLE

BAY WINDOWS

CORNER WINDOWS

APARTMENT WINDOW

TIMBER LOOK

COLONIAL LOOK

FROSTED WINDOWS

TINTED WINDOWS

PET DOOR

Check out our projects

Ascot Vale, Melbourne

Ascot Vale, Melbourne

Bentleigh East, Melbourne

Glen Waverly, Melbourne

North Melbourne, Melbourne

Port Melbourne, Melbourne

Preston Black Frames, Melbourne

St Kilda, Melbourne

Vermont Clinic, Melbourne

Frequently asked questions

uPVC is otherwise known as unplasticised polyvinyl chloride or rigid PVC. These frames are known for being highly durable, fire-resistant, and recyclable. uPVC is widely used in construction, especially with such applications as doors and windows.

uPVC is otherwise known as unplasticised polyvinyl chloride or rigid PVC. These frames are known for being highly durable, fire-resistant, and recyclable. uPVC is widely used in construction, especially with such applications as doors and windows.

Tilt and turn uPVC windows are unlike anything Australians have seen before. Not only do they provide three opening positions (tilt, turn, and micro-ventilation) but also come with free highly durable fly screens as standard.

Our uPVC frames and profiles come in white as a standard; but can be laminated to a range of colours using Renolit FX Lamination. This is specifically designed and formulated for harsh Australian climate. Our popular timber look lamination resembles a natural timber window or a door.

Our windows can often be installed from the inside in compliance with AS 4055-2012 (Wind loads for housing). Please get in touch with us to discuss your project needs.

Significant energy savings can be achieved upon installing Windows Republic uPVC frames with Low-e glass. For example, our Double Glazed uPVC windows with Low-E glass can stop up to 70% of heat loss and 77% of heat gain as compared to the standard single glazed aluminium windows (Which are in wide presence all around Australia). By getting Double Glazing you could be saving more than 40% on your energy bills.

Installation is fast! It will usually take around a day for smaller projects and up to three to five days for larger houses. In any case, your home won’t be left without any uPVC windows fitted at the end of each installation day.

Installation is fast! It will usually take around a day for smaller projects and up to three to five days for larger houses. In any case, your home won’t be left without any uPVC windows fitted at the end of each installation day.

The uPVC profiles are extruded in Europe and hardware comes from Germany. Windows Republic purchases materials from local accredited suppliers and manufactures windows on a new assembly line in our cozy facility in Mordialloc, Melbourne. All frames come with multiple chambers and are reinforced with A-grade galvanised steel. All tilt and turn uPVC windows include world-known German hardware SIEGENIA or ROTO as standard.

In fact, that is the only way we make frames. All frames are custom made to your requirements and design specifications.

Yes, as single glazed aluminium window frames are amongst the worst performers, while timber frames will eventually rot, peel, and chip. Windows Republic uPVC frames are highly durable and require little maintenance. Moreover, all frames and profiles are fusion welded together to eliminate all drafts and water leaks.

All our products are backed up by 10 year warranty.

Simply upload your uPVC window quote and we guarantee to beat it by 5% with a more premium product.

All Windows Republic products have been tested in NATA accredited laboratories in Melbourne to comply with AS 2047-2014 (Windows and external glazed doors in buildings). Insulated Glass Units (IGUs) comply with AS 1288-2006, R2016 (Glass in buildings – Selection and installation). Windows Republic is a proud local manufacturer of European quality energy efficient windows and doors.

Windows Republic can supply windows and doors in more than 95% of Australia (including all of Victoria, South Australia, New South Wales, and Tasmania, most parts of Queensland and Western Australia) up to cyclonic region C2.