Apache command line restart linux

Установка Apache Server

Чтобы установить веб-сервер Apache, используйте ваш стандартный менеджер пакетов, как показано ниже.

Проверка версии Apache

Чтобы проверить установленную версию вашего веб-сервера Apache в вашей системе Linux, выполните следующую команду.

Если вы хотите увидеть номер версии Apache и параметры компиляции, используйте флаг -V, как показано ниже.

Проверка на ошибки синтаксиса конфигурации Apache

Чтобы проверить ваши файлы конфигурации Apache на наличие любых синтаксических ошибок, выполните следующую команду, которая проверит правильность файлов конфигурации, прежде чем перезапускать службу.

Запуск сервиса Apache

Чтобы запустить службу Apache, выполните следующую команду.

Включение службы Apache

Предыдущая команда пока только запускает службу Apache, чтобы включить автозапуск при загрузке системы, выполните следующую команду.

Перезапуск службы Apache

Чтобы перезапустить Apache (остановить, а затем запустить службу), выполните следующую команду.

Просмотр состояния сервиса Apache

Чтобы проверить информацию о состоянии времени выполнения службы Apache, выполните следующую команду.

Перезагрузка сервиса Apache

Если вы внесли какие-либо изменения в конфигурацию сервера Apache, вы можете указать службе перезагрузить свою конфигурацию, выполнив следующую команду.

Остановка службы Apache

Чтобы остановить службу Apache, используйте следующую команду.

Показать справку Apache Command

И последнее, но не менее важное: вы можете получить справку о служебных командах Apache в systemd, выполнив следующую команду.

На этом пока все! В этой статье мы объяснили наиболее часто используемые команды управления службами Apache / HTTPD, которые полезно будет знать, включая запуск, включение, перезапуск и остановку Apache.

Онлайн курс по Linux

Мы собрали концентрат самых востребованных знаний, которые позволят тебе начать карьеру администратора Linux, расширить текущие знания и сделать уверенный шаг к DevOps

Источник

Ubuntu Linux: Start / Restart / Stop Apache Web Server

H ow do I start, restart, or stop Apache 2.x web server on Ubuntu Linux operating systems using command line options?

You can use any one of the following method to restart / start / stop your Apache (httpd) sever on Ubuntu:

1. systemctl command – Only works on systemd based Ubuntu like version 16.04 LTS and above.
2. /etc/init.d/apache2 – A sys v init style script to start / stop / restart the Apache2 service under Debian or Ubuntu Linux.
3. service command – This command work in most Linux distributions including Debian and Ubuntu.
4. upstart command – Only works on certain version of Ubuntu.
5. apache2ctl command – This method should work on all Linux and Unix like operating systems.

Method #1: systemctl command examples

To start Apache 2 on Ubuntu Linux LTS 16.04 LTS or the latest systemd based Ubuntu Linux, type:
$ sudo systemctl start apache2.service
To stop Apache 2 on Ubuntu Linux LTS 16.04 LTS or the latest systemd based Ubuntu Linux, type:
$ sudo systemctl stop apache2.service
To restart Apache 2 on Ubuntu Linux LTS 16.04 LTS or the latest systemd based Ubuntu Linux, type:
$ sudo systemctl restart apache2.service
To status of start/restart/stop operation, enter:
$ journalctl -u apache2
To find out whether Apache 2 running or not, enter:
$ sudo systemctl status apache2.service
Sample session:

Fig.01: Ubuntu Linux systemctl start/stop/restart Apache server (systemd)

Method #2: /etc/init.d/apache2 command examples

You need to login as root user or use the sudo command to control Apache web-server.

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

Task: Start Apache 2 Server

# /etc/init.d/apache2 start
or
$ sudo /etc/init.d/apache2 start

Task: Restart Apache 2 Server

# /etc/init.d/apache2 restart
or
$ sudo /etc/init.d/apache2 restart

Task: Stop Apache 2 Server

# /etc/init.d/apache2 stop
or
$ sudo /etc/init.d/apache2 stop

Method #3: service command examples

To restart Apache 2, enter:
$ sudo service apache2 restart
To stop Apache 2, enter:
$ sudo service apache2 stop
To start Apache 2, enter:
$ sudo service apache2 start
To gracefully reload Apache 2, enter:
$ sudo service apache2 reload

Method #4: upstart command examples

The following commands only works with certian version of Ubuntu such as Ubuntu Linux LTS 12.04 and 14.04. To start Apache 2 on Ubuntu, run:
$ sudo start apache2
To stop Apache 2 on Ubuntu, run:
$ sudo stop apache2
To restart Apache 2 on Ubuntu, run:
$ sudo restart apache2
To gracefully reload Apache 2 on Ubuntu, run:
$ sudo restart apache2

Method #5: apache2ctl command examples

apache2ctl is Apache HTTP server control interface command, which can be used to stop or start web server under any Linux distribution or UNIX.
To start Apache 2 on Ubuntu, type:
$ sudo apache2ctl start
To stop Apache 2 on Ubuntu, type:
$ sudo apache2ctl stop
To restart Apache 2 on Ubuntu, type:
$ sudo apache2ctl restart
To gracefully reload Apache 2 on Ubuntu, type:
$ sudo apache2ctl graceful

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Comments on this entry are closed.

/.bash_profile and add:
alias apache=’sudo /etc/init.d/apache2′

Then it’s just apache start, apache restart, etc.

Thanks for the tip. It worked like a charm.

These cmd line works great.

Here is what works for me:

/etc/rc.d/init.d/httpd (space) start

/etc/rc.d/init.d/httpd (space) stop

nice tutorials,
is there a way to run the apache server as services just like in xampp?
Thanks,
man

wohooooooo. good tutorial . 4 thumbs ^_^

it s not workin for me….
the result is
sudo: /etc/init.d/apache2 commad not found
pls help me guys

sudo /etc/init.d/apache2 do not put that column after sudo

i has stop my apache server, but another connections still establish

unix 3 [ ] STREAM CONNECTED 14940 /tmp/orbit-username/

I’m from Brazil, and your tip helped me a lot, thanks!

sudo service apache2 restart

Thanks mate! nice and easy ( I like the easy ones!)

Thanks for the help.

the amount of times i forget this. sheesh. thanks gzip

Hi! this tutorial is great. things have been ok but mine didnt work at the configuration stage. i restart the server but this d response:
Restarting web server apache2 apache2: Could not reliably determine the server’s fully qualified domain name, using 127.0.1.1 for ServerName
… waiting apache2: Could not reliably determine the server’s fully qualified domain name, using 127.0.1.1 for ServerName
help me pls

Your can also use this command
sudo service apache2 restart

Does the “sudo service apache2” apply for the php cli ?

PHP Cli uses a different php.ini .

sudo service apache2 This worked for me, thanks a lot. I had an instance of apache2 running, but it was screwing up apache that was trying to run in xampp.

Nice tutorial. Help a lot 🙂

If you get “command not found” then apache2 may have been installed in a non-standard directory. For instance the bitnami installers put it in ‘stack’, so to find the ctl.sh you may need to use

sudo stack/apache2/scripts/ctl.sh restart

Whether this actually solves your problem or not, I don’t know, but it doesn’t cause the error.

Also when using bitnami the command

sudo stack/ctlscript.sh restart

restarts every service bitnami installed, including apache, in a logical order.

Final comment on this: If you are using one of the XAMPP or other stacks that installs apache as part of a larger package, you want to watch the stack-restart command (like the one I gave above for bitnami) very closely and always get the verbose log.

If you have made some change like blowing away an app directory you aren’t using to fit within tight cloud host requirements, the configuration files generated for apache may be wrong/fragile and may cause apache to just not start with no indication why. However the stack-restart command for the stack you are using will generally report that problem. For instance in bitnami the restart is fragile – unless every single line of the configuration files it is relying on is up to date, you’ll have to go edit them yourself

sudo nano /opt/bitnami/apache2/conf/bitnami/bitnami-apps-prefix.conf

PHP is however more robust and usually only generates a warning if it doesn’t find some app configuration include. The worst you will see from PHP is a line like this

WARNING: Nothing matches the include pattern ‘/opt/bitnami/apps/limesurvey/conf/php-fpm/pool.conf’ from /opt/bitnami/php/etc/php-fpm.conf at line 17.

so you can sudo nano that .conf file also, but it might be better to let all future shell users have at least a chance to notice that you blew away an app package and then manually reconfigured. I would leave the warnings in place myself. Your mileage may vary.

why we have to restart apache server in ubantu

## How To Install Linux, Apache, MySQL, PHP (LAMP) stack on Ubuntu 14.04

$ sudo apt-get update
$ sudo apt-get install apache2

Источник