- Installation guide
- Contents
- Pre-installation
- Acquire an installation image
- Verify signature
- Prepare an installation medium
- Boot the live environment
- Set the console keyboard layout
- Verify the boot mode
- Connect to the internet
- Update the system clock
- Partition the disks
- Example layouts
- Format the partitions
- Mount the file systems
- Installation
- Select the mirrors
- Install essential packages
- Configure the system
- Fstab
- Chroot
- Time zone
- Localization
- Network configuration
- Initramfs
- Root password
- Boot loader
- Reboot
- Post-installation
- Как подготовить полноценную инсталляцию ArchLinux на USB Flash
- Подготовка
- Определяемся с именами
- Создаём файловую систему на флешке
- Устанавливаем систему
- Ставим pacman и пакеты
- Настраиваем систему
- Узнаём UUID файловой системы
- /etc/fstab
- /etc/inittab
- /etc/sudoers
- Отключаем флешку
- Установка загрузчика (для старого GRUB)
- Полезные ссылки
- Если кто-то поковырялся и всё сломал
- Простая установка (2014)
- Установка Arch Liunx на USB и начальная настройка
- Настройка после установки
Installation guide
This document is a guide for installing Arch Linux using the live system booted from an installation medium made from an official installation image. The installation medium provides accessibility features which are described on the page Install Arch Linux with accessibility options. For alternative means of installation, see Category:Installation process.
Before installing, it would be advised to view the FAQ. For conventions used in this document, see Help:Reading. In particular, code examples may contain placeholders (formatted in italics ) that must be replaced manually.
For more detailed instructions, see the respective ArchWiki articles or the various programs’ man pages, both linked from this guide. For interactive help, the IRC channel and the forums are also available.
Arch Linux should run on any x86_64-compatible machine with a minimum of 512 MiB RAM, though more memory is needed to boot the live system for installation.[1] A basic installation should take less than 2 GiB of disk space. As the installation process needs to retrieve packages from a remote repository, this guide assumes a working internet connection is available.
Contents
Pre-installation
Acquire an installation image
Visit the Download page and, depending on how you want to boot, acquire the ISO file or a netboot image, and the respective GnuPG signature.
Verify signature
It is recommended to verify the image signature before use, especially when downloading from an HTTP mirror, where downloads are generally prone to be intercepted to serve malicious images.
On a system with GnuPG installed, do this by downloading the PGP signature (under Checksums in the Download page) to the ISO directory, and verifying it with:
Alternatively, from an existing Arch Linux installation run:
Prepare an installation medium
The installation image can be supplied to the target machine via a USB flash drive, an optical disc or a network with PXE: follow the appropriate article to prepare yourself an installation medium from the chosen image.
Boot the live environment
- Point the current boot device to the one which has the Arch Linux installation medium. Typically it is achieved by pressing a key during the POST phase, as indicated on the splash screen. Refer to your motherboard’s manual for details.
- When the installation medium’s boot loader menu appears, select Arch Linux install medium and press Enter to enter the installation environment.
To switch to a different console—for example, to view this guide with Lynx alongside the installation—use the Alt+arrow shortcut. To edit configuration files, mcedit(1) , nano and vim are available. See packages.x86_64 for a list of the packages included in the installation medium.
Set the console keyboard layout
The default console keymap is US. Available layouts can be listed with:
To modify the layout, append a corresponding file name to loadkeys(1) , omitting path and file extension. For example, to set a German keyboard layout:
Console fonts are located in /usr/share/kbd/consolefonts/ and can likewise be set with setfont(8) .
Verify the boot mode
To verify the boot mode, list the efivars directory:
If the command shows the directory without error, then the system is booted in UEFI mode. If the directory does not exist, the system may be booted in BIOS (or CSM) mode. If the system did not boot in the mode you desired, refer to your motherboard’s manual.
Connect to the internet
To set up a network connection in the live environment, go through the following steps:
- Ensure your network interface is listed and enabled, for example with ip-link(8) :
- For wireless and WWAN, make sure the card is not blocked with rfkill.
- Connect to the network:
- Ethernet—plug in the cable.
- Wi-Fi—authenticate to the wireless network using iwctl.
- Mobile broadband modem—connect to the mobile network with the mmcli utility.
- Configure your network connection:
- DHCP: dynamic IP address and DNS server assignment (provided by systemd-networkd and systemd-resolved) should work out of the box for Ethernet, WLAN and WWAN network interfaces.
- Static IP address: follow Network configuration#Static IP address.
- The connection may be verified with ping:
Update the system clock
Use timedatectl(1) to ensure the system clock is accurate:
To check the service status, use timedatectl status .
Partition the disks
When recognized by the live system, disks are assigned to a block device such as /dev/sda , /dev/nvme0n1 or /dev/mmcblk0 . To identify these devices, use lsblk or fdisk.
Results ending in rom , loop or airoot may be ignored.
The following partitions are required for a chosen device:
If you want to create any stacked block devices for LVM, system encryption or RAID, do it now.
Use fdisk or parted to modify partition tables. For example:
Example layouts
Mount point | Partition | Partition type | Suggested size |
---|---|---|---|
[SWAP] | /dev/swap_partition | Linux swap | More than 512 MiB |
/mnt | /dev/root_partition | Linux | Remainder of the device |
Mount point | Partition | Partition type | Suggested size |
---|---|---|---|
/mnt/boot or /mnt/efi 1 | /dev/efi_system_partition | EFI system partition | At least 260 MiB |
[SWAP] | /dev/swap_partition | Linux swap | More than 512 MiB |
/mnt | /dev/root_partition | Linux x86-64 root (/) | Remainder of the device |
- /mnt/efi should only be considered if the used boot loader is capable of loading the kernel and initramfs images from the root volume. See the warning in Arch boot process#Boot loader.
Format the partitions
Once the partitions have been created, each newly created partition must be formatted with an appropriate file system. For example, to create an Ext4 file system on /dev/root_partition , run:
If you created a partition for swap, initialize it with mkswap(8) :
Mount the file systems
Mount the root volume to /mnt . For example, if the root volume is /dev/root_partition :
Create any remaining mount points (such as /mnt/efi ) using mkdir(1) and mount their corresponding volumes.
If you created a swap volume, enable it with swapon(8) :
genfstab(8) will later detect mounted file systems and swap space.
Installation
Select the mirrors
Packages to be installed must be downloaded from mirror servers, which are defined in /etc/pacman.d/mirrorlist . On the live system, after connecting to the internet, reflector updates the mirror list by choosing 20 most recently synchronized HTTPS mirrors and sorting them by download rate.[2]
The higher a mirror is placed in the list, the more priority it is given when downloading a package. You may want to inspect the file to see if it is satisfactory. If it is not, edit the file accordingly, and move the geographically closest mirrors to the top of the list, although other criteria should be taken into account.
This file will later be copied to the new system by pacstrap, so it is worth getting right.
Install essential packages
Use the pacstrap(8) script to install the base package, Linux kernel and firmware for common hardware:
The base package does not include all tools from the live installation, so installing other packages may be necessary for a fully functional base system. In particular, consider installing:
- userspace utilities for the management of file systems that will be used on the system,
- utilities for accessing RAID or LVM partitions,
- specific firmware for other devices not included in linux-firmware (e.g. sof-firmware for sound cards),
- software necessary for networking,
- a text editor,
- packages for accessing documentation in man and info pages: man-db , man-pages and texinfo .
To install other packages or package groups, append the names to the pacstrap command above (space separated) or use pacman while chrooted into the new system. For comparison, packages available in the live system can be found in packages.x86_64.
Configure the system
Fstab
Generate an fstab file (use -U or -L to define by UUID or labels, respectively):
Check the resulting /mnt/etc/fstab file, and edit it in case of errors.
Chroot
Change root into the new system:
Time zone
Run hwclock(8) to generate /etc/adjtime :
This command assumes the hardware clock is set to UTC. See System time#Time standard for details.
Localization
Edit /etc/locale.gen and uncomment en_US.UTF-8 UTF-8 and other needed locales. Generate the locales by running:
Network configuration
Add matching entries to hosts(5) :
If the system has a permanent IP address or a fully qualified domain name, see the example in Network configuration#Local hostname resolution.
Complete the network configuration for the newly installed environment, that may include installing suitable network management software.
Initramfs
Creating a new initramfs is usually not required, because mkinitcpio was run on installation of the kernel package with pacstrap.
For LVM, system encryption or RAID, modify mkinitcpio.conf(5) and recreate the initramfs image:
Root password
Boot loader
Choose and install a Linux-capable boot loader. If you have an Intel or AMD CPU, enable microcode updates in addition.
Reboot
Exit the chroot environment by typing exit or pressing Ctrl+d .
Optionally manually unmount all the partitions with umount -R /mnt : this allows noticing any «busy» partitions, and finding the cause with fuser(1) .
Finally, restart the machine by typing reboot : any partitions still mounted will be automatically unmounted by systemd. Remember to remove the installation medium and then login into the new system with the root account.
Post-installation
See General recommendations for system management directions and post-installation tutorials (like creating unprivileged user accounts, setting up a graphical user interface, sound or a touchpad).
For a list of applications that may be of interest, see List of applications.
Источник
Как подготовить полноценную инсталляцию ArchLinux на USB Flash
В этой заметке рассказано, как, имея работающий ArchLinux, поставить полноценный ArchLinux на USB-Flash. Затем, аналогично, можно поставить ArchLinux на жёсткий диск, загрузившись с USB-носителя. Собственно, для этих целей я и делал такую флешку: чтобы поставить ArchLinux ни netbook и на embedded-систему, где загрузиться можно было только с флешки, а BIOSы обладали странными особенностями.
Внимание! Первая версия этой статьи был написана году в 2010. Потом она долго не правилась и в 2012 в неё были внесены существенные коррективы. С тех пор в Arch Linux произошли большие изменения. Например, переход на systemd . Поэтому текст может содержать противоречия.
А чтобы противоречий стало ещё больше, в конце я дописал дополнение от 2014 года.
Подготовка
Определяемся с именами
Советую создать переменные с ключевыми именами и путями:
Создаём файловую систему на флешке
Можно и ext3/4, но в нашем случае нет надобности в журнале, он даже мешает. Да и старые версии GRUB не очень любили ext4. Зато для старых систем есть драйвера под Windows и прочие приятности.
Для нормальной работы GRUB так же очень важно изменить тип партиции на 0x83.
Устанавливаем систему
Ставим pacman и пакеты
Теперь можно попробовать загрузиться, заодно, посмотреть, что надо подправить в GRUB. Вполне вероятно, что умолчальные настройки не позволят загрузиться сразу.
Настраиваем систему
Узнаём UUID файловой системы
Далее используем его.
Хотя эти фокусы прокатывают далеко не всегда. Возможно, в вашем случае единственный рабочий вариант — /dev/sda1
Для старой версии
Во второй версии всё создастся автоматически, но имеет смысл подправить строчки
В search надо заменить UUID .
/etc/fstab
Можно ещё создать swap-файл, если есть острая необходимость, хотя, надо отдавать себе отчёт в том, что флешка долго такого издевательства не выдержит.
/etc/inittab
Чтобы видеть сообщения системы во время загрузки, полезно внести вот такие изменения:
/etc/sudoers
Создаём пользователя и добавляем его в sudoers (опции по вкусу):
Отключаем флешку
Установка загрузчика (для старого GRUB)
Обратите внимание, что root в конфигурации GRUB не равен root в момент установки. Это связано с переименованием устройств в момент загрузки с флешки. Строго говоря, это дело зависит от вашего BIOS, на на современных системах всё должно работать именно в такой конфигурации.
Полезные ссылки
Подробный рассказ про то, как изменить размер NTFS-раздела без потери данных. Рассказ очень подробный и качественный. И хот он довольно старый, но у меня всё тоже самое сработал на ntfsresize 3.x.
Если кто-то поковырялся и всё сломал
Такое бывает, если вашу флешку берёт какой-нибудь приятель для восстановления древней системы. Он там наваливает доисторических библиотек и вообще всё портит.
Переустановить все пакеты можно так:
Простая установка (2014)
За годы существования этой статьи, Arch Linux сильно изменился, многие действия упростились (появились скрипты, которые их автоматизируют). Поэтому здесь я приведу простую инструкцию, актуальную на 2014 год.
Я не буду вдаваться в детали, многие приёмы, описанные выше, не потеряли своей актуальности. Некоторые действия вы, возможно, не доверите скриптам и захотите выполнить по шагам со своими коррективами. Одним словом, я бы советовал иметь ввиду и старую и новую процедуру установки.
Установка Arch Liunx на USB и начальная настройка
Форматирвоать лучше как-то так:
Загрузитесь с установочного CD (это можно сделать в виртуальной машине). Смонтируйте флешку в /mnt и поставьте необходимые пакеты (важно установить grub , если вы его будете использовать):
Если вы (резонно) планируете на новой системе сразу воспользоваться Wi-Fi, то обязательно поставьте wpa_supplicant именно сейчас. Сам он не встанет, и netctl не сможет поднять Wi-Fi.
Так же, часто бывают полезны пакет ntfs-3g ( ntfsresize именно в нём) и lshw .
И уходим в новую систему:
Тут важно уменьшить влияние базовой системы. Не забудьте удалить переменные типа LANG и LC_ALL . env -i может пригодиться.
Там у вас уже есть bash , mc … чувствуйте себя как дома. Обживаемся:
По желанию можно настроить локаль ( /etc/locale.gen , locale-gen , /etc/locale.conf ), консоль ( /etc/vconsole.conf )… мне это всё на флешке не нужно.
Полезно настроить часовой пояс:
И обязательно(!) надо пересобрать init-образ (хук usb больше не нужен):
и установить загрузчик (осторожно!):
(процедура отличается от вышеописанной, так как версия grub изменилась)
На этом этапе можно создать пользователя:
Всё. Можно выходить из chroot и размонтировать флешку:
Настройка после установки
К сожалению, пока вы в chroot, systemctl работать не будет. Поэтому загружаемся с флешки. Это можно сделать в эмуляторе. Например так:
Источник