Arch linux mount usb

USB storage devices (Русский)

В этом документе описываются способы использования различных USB накопителей в Linux. Это также касается и других устройств, таких как цифровые камеры или телефоны, которые распознаются как обычные USB накопители.

Contents

Монтирование USB устройств

Если у вас свежая система со стандартным ядром Arch и современная среда рабочего стола, USB устройство должно автоматически появляться на рабочем столе при подключении, и лезть в консоль не потребуется.

Если этого не произошло см. далее.

Автоматическое монтирование с помощью udev

См. Udev:Монтирование съёмных устройств. Простой способ настройки автомонтирования жестких дисков для однопользовательских систем с использованием udev заключается в следующем: создается файл /etc/udev/rules.d/automount.rules со следующим содержимым:

и исполняемый от root файл /usr/lib/udev/domount со следующим содержимым (необходимо вставить корректные для Вашей системы значения):

При подключении USB-диска происходит автомонтирование и открывается окно терминала. Чтобы размонтировать устройства, просто нажмите Ctrl + D в окне терминала. Место монтирования определяется в /etc/fstab или, при его отсутствии, создается на основе UUID раздела.

Чтобы ваш пароль не запрашивался при команде размонтирования, добавьте (заменить на ваше имя пользователя) имя_пользователя в /etc/sudoers с помощью команды visudo. См. Sudo (Русский)

Если терминал не появляется проверьте команду его запуска. Например, в xfce4, используется команда «Terminal -T -e

Источник

Arch Linux

You are not logged in.

#1 2013-05-15 18:26:54

Auto Mounting USB sticks

So, I’ve looked around a lot, but I can’t find much at all about mounting my usb sticks whenever they’re plugged in. It’d be nice to not have to # mount /dev/sde1 /home/droid/usb
I’ve set it up as the wiki says to do so with Thunar, but it’s still not working. Any help?

#2 2013-05-15 18:55:53

Re: Auto Mounting USB sticks

«still not working» is not a helpful error message.

Moving to Newbie Corner.

Registered Linux User #482438

#3 2013-05-16 05:09:38

Re: Auto Mounting USB sticks

As jasonwryan mentioned the wiki is your friend. If you are trying to automount volumes with thunar make sure to install thunar-volman:

Then you must configure thunar to automount your thumbdrive(s):

It can also be configured to execute certain actions when cameras and audio players are connected. After installing the plugin:

1. Launch Thunar and go to Edit -> Preferences
2. Under the ‘Advanced’ tab, check ‘Enable Volume Management’
3. Click configure and check the following items:
Mount removable drives when hot-plugged.
Mount removable media when inserted.

also add dbus-launch to your .xinitrc making sure it comes before your windows manager/desktop environment
for example my .xinitrc contains:

Granted there are numerous different ways to automount usb drives, but based on your post I assume that this is the method you are trying to use.

Last edited by Gr0t92 (2013-05-16 05:20:36)

Источник

USB storage devices

This document describes how to use the popular USB memory sticks with Linux. However, it is also valid for other devices such as digital cameras that act as if they were just a USB storage device.

If you have an up-to-date system with the standard Arch kernel and a modern Desktop environment your device should just show up on your desktop, with no need to open a console.

Contents

Auto-mounting with udisks

This is the easiest and most frequently used method. It is used by many desktop environments, but can be used separately too.

See Udisks for detailed information, including list of mount helpers.

Manual mounting

Getting a kernel that supports usb_storage

If you do not use a custom-made kernel, you are ready to go, for all Arch Linux stock kernels are properly configured. If you do use a custom-made kernel, ensure it is compiled with SCSI-Support, SCSI-Disk-Support and usb_storage. If you use the latest udev, you may just plug your device in and the system will automatically load all necessary kernel modules.

Identifying device

The first thing one needs to access a storage device is its identifier assigned by kernel. See fstab#Identifying filesystems for details.

Mounting USB memory

You need to create the directory in which you are going to mount the device:

As root

This article or section is a candidate for merging with File_systems#Mount_a_file_system.

Mount the device as root with this command (do not forget to replace device_node by the path you found):

If mount does not recognize the file system of the device you can try to use the -t argument, see mount(8) for details. If mounting does not work, you can try to recreate the file system or even repartition the disk.

Allow writing by regular users

If you want non-root users to be able to write to the USB stick, you can issue the following command:

If it does not work, make sure that the file system is mountable and writable as root, see the previous section for details.

As normal user with fstab

See FAT#Writing to FAT32 as normal user if you want normal user to do the mount/unmount action.

Mount tools

Multiple mount tools facilitate mounting as a regular user.

Troubleshooting

No USB storage devices are acknowledged by the system

If you have connected your USB storage device to the computer and it is not listed by lsblk or dmesg, ensure that your BIOS has both XHCI Handoff and EHCI Handoff enabled.

USB device detected but not mountable

If you recently upgraded you kernel, the modules for USB storage for your currently running kernel were removed and replaced with modules for the newly installed kernel. These modules will not be loaded until you reboot and run the new kernel.

Device not shutting down after unmounting all partitions

This article or section needs expansion.

Failure to power off a device might result in:

• a hard disk drive not parking its head, making a faint scratching sound while spinning out and degrading the device [2], or
• a solid-state drive (especially older) not flushing its cache buffers or updating its mapping tables, and losing data [3].

When you unmount the partitions, the device is still powered on. You should ask the system to turn it off first in order to safely remove it: [4]

If you use udisks, you can use these commands: [5]

Источник

USB flash installation medium

This page discusses various multi-platform methods on how to create an Arch Linux Installer USB drive (also referred to as «flash drive», «USB stick», «USB key», etc) for booting in BIOS and UEFI systems. The result will be a Live USB (Live CD-like) system that can be used for installing Arch Linux, system maintenance or for recovery purposes, and that, because of using Overlayfs for / , will discard all changes once the computer shuts down.

If you would like to run a full install of Arch Linux from a USB drive (i.e. with persistent settings), see Install Arch Linux on a removable medium. If you would like to use your bootable Arch Linux USB stick as a rescue USB, see Change root.

Contents

Using the ISO as is (BIOS and UEFI)

In GNU/Linux

Using basic command line utilities

This method is recommended due to its simplicity and universal availability, since these tools are part of coreutils (pulled in by the base meta-package).

Run the following command, replacing /dev/sdx with your drive, e.g. /dev/sdb . (Do not append a partition number, so do not use something like /dev/sdb1 ):

• using cat :
• using cp :
• using dd :
• using tee :

See [1] and [2] for a comparison and perspective on the use of those tools and why dd may be the least adapted one.

Using GNOME Disk Utility

Linux distributions running GNOME can easily make a live CD through nautilus and gnome-disk-utility . Simply right-click on the .iso file, and select Open With Disk Image Writer. When GNOME Disk Utility opens, specify the flash drive from the Destination drop-down menu and click Start Restoring.

Using MultiWriter

gnome-multi-writer is a simple GTK3 based graphical tool to write an ISO file to one or multiple USB devices at once.

Using Kindd

Kindd is a Qt based graphical frontend for dd. It is available as kindd AUR .

Using Popsicle

Popsicle is a tool made for flashing ISO files to multiple USB devices in parallel by the PopOS development team. It is written in Rust and uses GTK. It is available as popsicle AUR .

Using SUSE Studio ImageWriter

SUSE Studio ImageWriter is a Qt based tool made by the OpenSUSE development team. It is available as imagewriter AUR .

Using xorriso-dd-target

xorriso-dd-target (from libisoburn ) is a shell script which attempts to reduce the risk of overwriting the wrong storage device. Its safest mode is named -plug_test . For example, to use it as a regular user who can elevate to root using sudo:

In Windows

Using win32diskimager

win32diskimager is another graphical USB iso writing tool for Windows. Simply select your iso image and the target USB drive letter (you may have to format it first to assign it a drive letter), and click Write.

Using USBwriter

This method does not require any workaround and is as straightforward as dd under Linux. Just download the Arch Linux ISO, and with local administrator rights use the USBwriter utility to write to your USB flash memory.

Using Rufus

Rufus is a multi-purpose USB ISO writer. It provides a graphical user interface and does not care if the drive is properly formatted or not.

Simply select the Arch Linux ISO, the USB drive you want to create the bootable Arch Linux onto and click START.

Using Cygwin

Make sure your Cygwin installation contains the dd package.

Place your image file in your home directory:

Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:

where archlinux-version-x86_64.iso is the path to the iso image file within the cygwin directory and \\.\x: is your USB flash drive where x is the windows designated letter, e.g. \\.\d: .

On Cygwin 6.0, find out the correct partition with:

and write the ISO image with the information from the output. Example:

dd for Windows

A GPL licensed dd version for Windows is available at http://www.chrysocome.net/dd. The advantage of this over Cygwin is a smaller download. Use it as shown in instructions for Cygwin above.

To begin, download the latest version of dd for Windows. Once downloaded, extract the archive’s contents into Downloads or elsewhere.

Now, launch your command prompt as an administrator. Next, change directory ( cd ) into the Downloads directory.

If your Arch Linux ISO is elsewhere you may need to state the full path, for convenience you may wish to put the Arch Linux ISO into the same folder as the dd executable. The basic format of the command will look like this.

Simply replace the various null spots (indicated by an «x») with the correct date and correct drive letter. Here is a complete example.

Using flashnul

flashnul is an utility to verify the functionality and maintenance of Flash-Memory (USB-Flash, IDE-Flash, SecureDigital, MMC, MemoryStick, SmartMedia, XD, CompactFlash etc).

From a command prompt, invoke flashnul with -p , and determine which device index is your USB drive, e.g.:

When you have determined which device is the correct one, you can write the image to your drive, by invoking flashnul with the device index, -L , and the path to your image, e.g:

As long as you are really sure you want to write the data, type yes, then wait a bit for it to write. If you get an access denied error, close any Explorer windows you have open.

If under Vista or Win7, you should open the console as administrator, or else flashnul will fail to open the stick as a block device and will only be able to write via the drive handle windows provides

In macOS

Using macOS dd

First, you need to identify the USB device. Open /Applications/Utilities/Terminal and list all storage devices with the command:

Your USB device will appear as something like /dev/disk2 (external, physical) . Verify that this is the device you want to erase by checking its name and size and then use its identifier for the commands below instead of /dev/diskX.

A USB device is normally auto-mounted in macOS, and you have to unmount (not eject) it before block-writing to it with dd . In Terminal, do:

Now copy the ISO image file to the device. The dd command is similar to its Linux counterpart, but notice the ‘r’ before ‘disk’ for raw mode which makes the transfer much faster:

This command will run silently. To view progress, send SIGINFO by pressing Ctrl+t . Note diskX here should not include the s1 suffix, or else the USB device will only be bootable in UEFI mode and not legacy. After completion, macOS may complain that «The disk you inserted was not readable by this computer». Select ‘Ignore’. The USB device will be bootable.

In Android

EtchDroid

EtchDroid is a OS image flasher for Android. It works without root permissions on Android 5 to Android 8. According to bug reports it does not always work on Android 9 and Android 4.4.

To create an Arch Linux installer, download the ISO image file on your Android device. Plug the USB drive to your device, using a USB-OTG adapter if needed. Open EtchDroid, select «Flash raw image», select your Arch ISO, then select your USB drive. Grant the USB API permission and confirm.

Keep your phone on a table while it is writing the image: a lot of USB-OTG adapters are a bit wobbly and you might unplug it by mistake.

Using manual formatting

BIOS and UEFI

In GNU/Linux

This method is more complicated than writing the image directly with dd , but it does keep the flash drive usable for data storage (that is, the ISO is installed in a specific partition within the already partitioned device without altering other partitions).

• If not done yet, create a partition table on /dev/sdX .
• If not done yet, create a partition on the device. The partition /dev/sdXn must be formatted to FAT32.
• Mount the FAT32 file system located in the USB flash device and extract the contents of the ISO image to it. For example:

Booting requires specifying the volume on which the files reside. By default the label ARCH_YYYYMM (with the appropriate release year and month) is used. Thus, the file system’s label has to be set accordingly. Alternatively, you can change this behaviour by altering the lines ending by archisolabel=ARCH_YYYYMM in the files:

• BIOS boot: /mnt/syslinux/archiso_sys-linux.cfg
• UEFI boot: /mnt/loader/entries/01-archiso-x86_64-linux.conf , /mnt/loader/entries/02-archiso-x86_64-speech-linux.conf and /mnt/loader/entries/03-archiso-x86_64-ram-linux.conf

To use an UUID instead, replace those portions of lines with archisodevice=/dev/disk/by-uuid/YOUR-UUID .

Syslinux files for BIOS systems are already copied to /mnt/syslinux . Unmount the FAT file system, install the syslinux and mtools packages and run the following commands to make the partition bootable:

In Windows

• Partition and format the USB drive using Rufus USB partitioner. Select partition scheme option as MBR for BIOS and UEFI and File system as FAT32. Uncheck «Create a bootable disk using ISO image» and «Create extended label and icon files» options.
• Change the Volume Label of the USB flash drive X: to match the LABEL mentioned in the archisolabel= part in \loader\entries\archiso-x86_64.conf . This step is required for Official ISO (Archiso). This step can be also performed using Rufus, during the prior «partition and format» step.
• Extract the ISO (similar to extracting ZIP archive) to the USB flash drive using 7-Zip.
• Download official Syslinux 6.xx binaries (zip file) from https://www.kernel.org/pub/linux/utils/boot/syslinux/ and extract it. The version of Syslinux should be the same version used in the ISO image.

• Run the following command (in Windows cmd prompt, as admin):

• Install Syslinux to the USB by running (use win64\syslinux64.exe for x64 Windows):

BIOS only

In GNU/Linux

Making a USB-ZIP drive

For some old BIOS systems, only booting from USB-ZIP drives is supported. This method allows you to still boot from a USB-HDD drive.

• Download syslinux and mtools from the official repositories.
• Find your usb drive with lsblk .
• Type mkdiskimage -4 /dev/sdx 0 64 32 (replace x with the letter of your drive). This will take a while.

From here continue with the manual formatting method. The partition will be /dev/sdx4 due to the way ZIP drives work.

UEFI only

For UEFI-only booting, it is enough to copy the files from the ISO and either change the FAT volume’s label or edit boot loader configuration files to set archisolabel / archisodevice accordingly.

In GNU/Linux

This method involves simply copies files from the ISO image to a USB flash drive and either adjusts the systemd-boot configuration or the file system’s label.

1. If not done yet, create a partition table on /dev/sdX and a partition ( /dev/sdXn ) on the device.
2. If not done yet, format the partition to FAT32:
3. Mount the FAT32 file system:
4. Extract the ISO image to the mounted file system:
5. Either:
   • edit /mnt/loader/entries/archiso-x86_64-linux.conf and /mnt/loader/entries/archiso-x86_64-speech-linux.conf and change archisolabel=ARCH_YYYYMM to match your device, e.g. by replacing it with archisodevice=/dev/disk/by-uuid/YOUR-UUID ,
   • or unmount the file system and change its LABEL to match ARCH_YYYYMM :
6. Unmount the FAT32 file system.

In Windows

1. Partition the USB flash drive and format it to FAT32.
2. Right click on archlinux-version-x86_64.iso and select Mount.
3. Navigate to the newly created DVD drive and copy all files and folders except for syslinux to the USB flash drive.
4. When done copying, right click on the DVD drive and select Eject.
5. Either:
   • edit X:\loader\entries\archiso-x86_64-linux.conf and X:\loader\entries\archiso-x86_64-speech-linux.conf with a text editor and change archisolabel=ARCH_YYYYMM to match your device, e.g. by replacing it with archisolabel=YOUR-LABEL ,
   • or change the FAT32 volume label to match ARCH_YYYYMM .
6. Eject the USB flash drive.

Using a multiboot USB drive

This allows booting multiple ISOs from a single USB device, including the archiso. Updating an existing USB drive to a more recent ISO is simpler than for most other methods. See Multiboot USB drive.

Using ventoy

Ventoy is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files. With ventoy, you do not need to format the disk over and over, you just need to copy the ISO/WIM/IMG/VHD(x)EFI files to the USB drive and boot them directly. You can copy many files at a time and ventoy will give you a boot menu to select them. It is available as ventoy-bin AUR .

In Windows

Loading the installation medium from RAM

This article or section is a candidate for merging with Multiboot USB drive#Using Syslinux and memdisk.

This method uses Syslinux and a Ramdisk (MEMDISK) to load the entire Arch Linux ISO image into RAM. Since this will be running entirely from system memory, you will need to make sure the system you will be installing this on has an adequate amount. A minimum amount of RAM between 500 MB and 1 GB should suffice for a MEMDISK based, Arch Linux install.

For more information on Arch Linux system requirements as well as those for MEMDISK see the Installation guide and here. For reference, here is the preceding forum thread.

Preparing the USB flash drive

Begin by formatting the USB flash drive as FAT32. Then create the following folders on the newly formatted drive.

Copy the needed files to the USB flash drive

Next copy the ISO that you would like to boot to the Boot/ISOs folder. After that, extract from the following files from the latest release of syslinux from here and copy them into the following folders.

• ./win32/syslinux.exe to the Desktop or Downloads folder on your system.
• ./memdisk/memdisk to the Settings folder on your USB flash drive.

Create the configuration file

After copying the needed files, navigate to the USB flash drive, /boot/Settings and create a syslinux.cfg file.

For more information see the Syslinux article.

Final steps

Finally, create a *.bat file where syslinux.exe is located and run it («Run as administrator» if you are on Vista or Windows 7):

Inadvisable methods

Using etcher

etcher contains analytics and first-party advertising. See [3], [4] and [5].

Источник