Arch linux qualcomm atheros

Arch Linux

You are not logged in.

#1 2016-07-21 14:30:06

[Solved] Qualcomm Atheros QCA9565 / AR9565 problem

I just did a fresh install of arch on my dell inspiron 5737. Everything worked out of the box more or less but i have some problems with Qualcomm Atheros QCA9565 / AR9565. Wifi worked without any problems just like the wiki says but it is a wifi+bt card. And when i go into kde system settings then bluetooth it says «no bluetooth adapters were found». I tried to look for a fix but most are strictly ubuntu related and fairly old. What shoud i do? My lspci looks like that:

00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Venus XT [Radeon HD 8870M / R9 M270X/M370X] (rev ff)

Last edited by zgredek (2016-07-22 09:47:26)

#2 2016-07-21 15:43:50

Re: [Solved] Qualcomm Atheros QCA9565 / AR9565 problem

The first step would be to look if the kernel recognizes a bluetooth device at all. What’s

«Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the present.» — Master Oogway

Источник

Arch Linux

You are not logged in.

#1 2016-06-08 11:29:46

[SOLVED] Qualcomm Atheros QCA6174 wireless won’t work properly

Recently installed Arch on a Dell Inpiron 13 7000 Series, which have a Qualcomm Atheros QCA6174 wireless card.
When I first tried to install Arch, although the interface was visible, it wasn’t able to connect to a wifi network using
wifi-menu.

I manage to install everything offline and have a proper Arch running, including the arch repos linux-firmware package,
but still no wifi.

and the card is visible.

I checked if the ath modules were loaded properly:

and checked the firmware path:

After searching here in the forums, I found this post which mentioned the kvalo firmware repository.
In the github page it says that the «. official location to download ath10k images is from linux-firmware». After downloading the files,
I manually updated the firmware files and changed their names:

but the wifi-menu command didn’t work at all.

It seems that this issue is pretty common with this wireless card, so I also found this bug in the ubuntu community,
which there are reports of people making the card work properly. I managed to build a package using the provided .DEB mentioned in comment #153 ,
the most recent so far, and installed it. Although the install was successful, the card behaviour stays the same.

I would appreciate some further indications on how to make this card work and have network connection to properly use my laptop.

Last edited by chicao (2016-06-14 01:39:18)

Источник

Arch Linux

You are not logged in.

#1 2019-06-04 10:08:59

Qualcomm Atheros AR9285 disconnects frequently

Hi guys.
When i connect to the public wifi of my university my wireless card keeps to disconnect, i have to turn off and then restart the card about every 5 minutes.
The issue persists from 2-3 months ago, i do not remember exactly, before then it worked properly.
I’m using network manager, restarting it does not resolve the issue, the card can’t reconnect to the wifi, i have to directly turn off the card.

I’ve tried to add this line:

but nothing changed.
I’ve tried to install wicd but the issue persists.
I’ve also tried to run Fedora and i’ve found the same issue.

Obviously i can’t access to the router settings.

i’ve tried to disable ipv6 but nothing changed.
Network settings
dmesg

Last edited by brofjst (2019-06-04 11:30:26)

#2 2019-06-04 17:15:45

Re: Qualcomm Atheros AR9285 disconnects frequently

#3 2019-06-04 19:47:10

Re: Qualcomm Atheros AR9285 disconnects frequently

judging by your dmesg log it looks like your bouncing back and forth between 2 APs

Edit0:Assuming you are back with network manager you might try to change your dhcp client. It could be that your bouncing between APs due to a problem with DHCP. This error «Reason: 3=DEAUTH_LEAVING» means it’s a local decision (I think).

Edit1: Whichever dhcp client your using now, make sure it is not enabled, network manager (or whatever) will want to manage dhcp on its own.

Last edited by Zod (2019-06-04 21:25:51)

#4 2019-06-07 08:30:14

Re: Qualcomm Atheros AR9285 disconnects frequently

Already tried but did not work

#5 2019-06-07 08:37:43

Re: Qualcomm Atheros AR9285 disconnects frequently

judging by your dmesg log it looks like your bouncing back and forth between 2 APs

Edit0:Assuming you are back with network manager you might try to change your dhcp client. It could be that your bouncing between APs due to a problem with DHCP. This error «Reason: 3=DEAUTH_LEAVING» means it’s a local decision (I think).

Edit1: Whichever dhcp client your using now, make sure it is not enabled, network manager (or whatever) will want to manage dhcp on its own.

I had dhcpcd enabled, i’ve uninstalled it but the issue persists, just one thing changed:
when the connection crashes with dhcpcd enabled if i ping a server (for example 8.8.8.8) the terminal doesn’t report any message, it just says

with dhcpcd disabled, it report this:

i post here the new dmesg with dhcpcd disabled

Update:
I’ve renabled dhcpcd and removed the option ps_enable=1 so the system should be equal as before i started this thread, but now the wireless connection acts differently: when it disconnects it tries to reconnect unsuccessfully to the network, but after about 30 seconds it successfully reconnects automatically without force me to restart the wireless card.

I don’t understand what’s changed because i didn’t even update the system today.
The issue is still very annoying because it disconnects very frequently.
i’ve tried to reintroduce the ps_enable=1 parameter but nothing changed, then i tried to disable dhcpcd but still nothing changed, the system works as i just said.
i post here the new dmesg.

Last edited by brofjst (2019-06-07 10:44:48)

Источник

Arch Linux

You are not logged in.

#1 2016-02-13 20:23:31

Qualcomm Atheros QCA6174 Wireless adapter firmware not loading

Can anyone please help :S
Trying to use wifi Acer Aspire v15

lspci -r
07:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
Subsystem: Foxconn International, Inc. Device e09d
Flags: bus master, fast devsel, latency 0, IRQ 130
Memory at 94000000 (64-bit, non-prefetchable) [size=2M]
Capabilities:
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci

ip link
1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp8s0:
mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 2c:60:0c:f7:d3:b4 brd ff:ff:ff:ff:ff:ff
3: wlp7s0:
mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 48:e2:44:ae:c1:57 brd ff:ff:ff:ff:ff:ff

iwconfig wlp7s0
wlp7s0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on

sudo iwlist wlp7s0 scan
wlp7s0 Interface doesn’t support scanning : Network is down

sudo ip link set wlp7s0 up
RTNETLINK answers: Resource temporarily unavailable

dmesg |grep ath10k
[ 1.553397] ath10k_pci 0000:07:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[ 1.786636] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2
[ 1.787449] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[ 1.787450] ath10k_pci 0000:07:00.0: could not fetch firmware file ‘ath10k/QCA6174/hw3.0/firmware-5.bin’: -2
[ 1.851663] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/board-2.bin failed with error -2
[ 3.973233] ath10k_pci 0000:07:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff sub 105b:e09d) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 fwapi 4 bdapi 1 htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp,no-4addr-pad
[ 3.973236] ath10k_pci 0000:07:00.0: debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 6.975533] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[ 7.041950] ath10k_pci 0000:07:00.0 wlp7s0: renamed from wlan0

Last edited by Dkebapmanager (2016-02-14 12:16:58)

Источник

Arch Linux

You are not logged in.

#1 2015-11-09 02:10:41

[solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

I cannot use wifi on lenovo flex 3 laptop. There is only lo and ethernet in ip link output.

Here is related sudo lspci -v

and here is related lsusb

Under windows it is working normally and is displayed as QCA61x4 network adapter.
For now my uname -r is 4.2.5-1-ARCH
I have found very similar topic here, but solution was waiting new linux kernel, which I already use.
According to this article, I need ath10k firmware.

As I understand, linux-firmware should already contain firmware for my wireless card, but it doesn’t for some reason.
I also tryed to manually modprobe ath10k_pci and ath10k_core and reboot, but with no success.
Also, I tried to download https://github.com/kvalo/ath10k-firmwar … CARMSWPZ-1
Note, that there is also https://github.com/kvalo/ath10k-firmwar … 0k/QCA6174 catalog, containing hw2.1 and hw3, but I did not use files from them. It by the way has strange numeration: hw3.0 contains older firmware than hw2.1.

So I renamed that firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 to firmware-5.bin and tryed the following:
creating /lib/firmware/ath10k/QCA6174 and placed it there
placing it in /lib/firmware/ath10k/QCA988X/hw2.0
and in /lib/firmware/ath10k/QCA988X/hw2.1
After all tryes I rebooted, but nothing helped.

Can you please help me? What should I do to make wifi working?

Last edited by agent0 (2015-12-23 22:40:33)

#2 2015-11-09 19:20:18

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

I was about to post the same but for the QCA9377 when I stumbled upon this thread:

with a solution by rinfinity. (Kudos chain must be maintained; I may even register in AskUbuntu just to thank him. )

Because your PCI relies as well on ath10k module, it should work the same just change the name wherever it is needed.

Mind that the second last line:

cp firmware-5.bin_WLAN.TF.1.0-00267-1 firmware-5.bin

should actually be a rename of the file so that .bin is the last part and it is properly recognized.

Good luck. (I am posting this using WiFi with the QCA9377. Yay!)

#3 2015-11-11 18:17:43

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

Hi, tharj!
Thanks for your advice.
I have never dealt with backports before, and as I understand, linux 4.3 release candidate should contain my firmware, so I decided to just install https://aur.archlinux.org/packages/linux-mainline/
But I still do not have wireless interface in ip link.
Is my suggestion about linux 4.3 correct? If yes, then are you sure, that it contains firmware for my wifi card?

#4 2015-11-12 11:40:34

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

You need firmware from another source

Then copy it as follows

sudo cp -r ath10k-firmware/ath10k/ /lib/firmware/
cd /lib/firmware/ath10k/QCA6164
sudo cp -r hw2.1/ /lib/firmware/ath10k/QCA6174/

I don’t know why 6164 firmware needs to be in the 6174 folder though

#5 2015-11-13 09:46:59

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

jeremy31, thanks for your suggestion.
I followed your instructions, but it did not help. I have copied QCA6164 and QCA6174 from that repo to my /lib/firmware and also copied hw2.1 from QCA6164 to QCA6174. Then rebooted.
Also I have tried to manually load modules ath10k_core and ath10k_pci by placing them to /etc/modules-load.d/ath10k.conf but it did not helped also.

Maybe I should make any additional config? Where did you got these instructions (about copying hw2.1 to another folder)?
And I should say, that I even do not know what exactly model of wifi card I have. I have identified my card as QCA61x4 under windows. But I do not know what kind of it, I mean 6164 or 6174. Is there a way how I can determine it and maybe from Linux?
Thanks in advance for your help.

#6 2015-11-13 22:31:01

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

Your current kernel may not support the wireless card. I am a regular on ubuntuforums and found this thread. You can check to see if it is supported in the kernel with

If it is supported terminal should provide output of alias: pci with a bunch of characters but since you have to add the modules to modules-load.d I would say the kernel doesn’t support it. I know the 4.2 kernel was problematic in Ubuntu with this chipset. The chipset is the QCA6164 and most of the info I have is from the ath10k kernel developers. I only have a USB with the arch linux ISO on it so I have limited experience. Can you update to a 4.3 kernel? You also need to load ath10k_core with option skip_otp=y, in Ubuntu it is done with

If the 4.3 kernel isn’t an option, kernel backports should work if you have the dependencies satisfied which I am not sure if Arch has them installed by default or what the package name is.

This download should have support for the QCA6164 wireless if you can install the backports https://www.kernel.org/pub/linux/kernel … 013.tar.gz

#7 2015-11-14 17:36:24

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

jeremy31, Thank you so much, it worked!
My modinfo ath10k_pci | grep 0041 output is

so, it seems that it is supported, however I am corrently using 4.3.0-rc7-mainline kernel.

I think the real problem resolving was that I loaded ath10k_core with skip_otp=y option as you advised above.
I do not know what that option means and why wifi was not working without it, but it helped!
Once again, thank you!

EDIT: Interesting, but there is still no bluetooth controller in bluetoothctl and rfkill list says that it is not blocked. Oh, sorry, it is working, I have just modprobed btusb and started bluetooth.service.

Last edited by agent0 (2015-11-15 07:55:20)

#8 2015-12-20 19:25:39

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

Now it is not working again.
I have installed linux version 4.3.3-1, linux-firmware version 20151207.bbe4917-1 from [testing] repository.
I have noticed, that that version of linux-firmware already includes QCA6174 directory with following content:

which was missing before. But my wifi was still not working. I got the following in my dmesg:

I decided to make procedure which jeremy31 advised above. So I deleted all content from /usr/lib/firmware/ath10k/, then made a package with the following PKGBUILD and installed it:

Then I removed and probed modules again:
$ sudo rmmod ath10k_pci
$ sudo modprobe -v ath10k_pci

After that, I had my wireless interface appeared in «ip link» output, but it could not work still.

#9 2015-12-20 19:43:59

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

I have also found this topic, where Atondwal (author of patched firmware) solved issue on the same hardware as mine 168c:0041

http://lists.infradead.org/pipermail/at … 04842.html I really shouldn’t have wiped windows so quickly. Apparently this is just the 1×1 version of 168c:003e, so if we had the firmware it would be a trivial change. But there’s no mention of this since on the mailing list.

Can anybody explain what does «1×1» and «2×2» version means?
How can I determine which version I have?
I have still Windows installed on my PC. Does it mean, that I can extract the blob and also build a patched kernel? Can anybody please instruct me what should I do?

Atondwal,
Which Lenovo laptop do you have? Are you still able to use your firmware version with 4.3.3 kernel?
If so, could you please correct PKGBUILD, that I provided above and push it to AUR?

Thanks in advance.

#10 2015-12-20 22:33:12

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

#11 2015-12-21 01:08:58

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

Maybe you mean ls /lib/firmware/ath10k/QCA6174/hw2.1/ ?
There are two files there: board.bin and firmware-5.bin

I believe, that my laptop needs some correct firmware files in this directory, because of message «ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:0041:17aa:3545.bin failed with error -2» and also because in lspci it is displayed as «(rev 20)», so I think it belongs to hw2.1.

As I said above, I removed files from here which were installed with linux-firmware package. Then I put here files from atondwal’s repository but from QCA6164/hw2.1

#12 2015-12-21 11:31:05

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

By the way, in Arch Linux «/lib» is symlink to «/usr/lib».
I do not know if firmware files need to have executable rights, so I gave that rights to check:

But still not working.

#13 2015-12-21 22:45:53

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

Is the firmware dump still happening in the dmesg results?

Do a md5sum and the board.bin and firmware-5.bin and compare it to a fresh download from Atondwals github

#14 2015-12-22 02:36:31

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

With atondwal’s firmware it does not crashes immediately. My wireless interface wlp2s0 is shown in ip link, but it could not be up. It does not support scanning neither via NetworkManager nor via wifi-menu.

But I was surprised that it reported that it has connected to previously configured (when I was on other kernel) wireless network.
If I understand that dump is what is going after «firmware register dump» then yes, it is appeared in dmesg. My full dmesg output I put here.

In lsmod I noticed that ath10k_pci have value 0 in Used by field. Is it normal?
$ lsmod | grep ath
Module Size Used by
ath10k_pci 40960 0
ath10k_core 245760 1 ath10k_pci
ath 28672 1 ath10k_core
mac80211 647168 1 ath10k_core
cfg80211 466944 3 ath,mac80211,ath10k_core

And about md5sums of my files:
Here is md5sums of atondwal’s repository files:
$ md5sum

/build/ath10_atondwal/ath10k-firmware-master/ath10k/QCA6164/hw2.1/*
e6adc90ecaf55edc656990c6c50193ac /home/user/build/ath10_atondwal/ath10k-firmware-master/ath10k/QCA6164/hw2.1/board.bin
efdc519119f49892e16053bc5db47436 /home/user/build/ath10_atondwal/ath10k-firmware-master/ath10k/QCA6164/hw2.1/firmware-5.bin

Here is md5sums of files which are currently installed in my system:
$ md5sum /usr/lib/firmware/ath10k/QCA6174/hw2.1/*
e6adc90ecaf55edc656990c6c50193ac /usr/lib/firmware/ath10k/QCA6174/hw2.1/board.bin
efdc519119f49892e16053bc5db47436 /usr/lib/firmware/ath10k/QCA6174/hw2.1/firmware-5.bin

Last edited by agent0 (2015-12-22 03:24:20)

#15 2015-12-22 03:22:28

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

I have just checked if it would work with files from kvalo’s repo (because it was updated since I wrote the first post: ath10k catalog was moved). And I also compared them with files included in linux-firmware.

Md5sums of kvalo’s repository files (commit ea0c8f9bce87e8a143dd66dd27dc959769c5748f):
$ md5sum QCA6174/hw2.1/*
461e7f4b2f32f1c4ef50d26f76b715eb /usr/lib/firmware/ath10k/QCA6174/hw2.1/board.bin
944ef57488e09e708222d4fb49c3ab73 /usr/lib/firmware/ath10k/QCA6174/hw2.1/firmware-5.bin (renamed)
bf9ec5483ed37fb00e52e04831084061 /usr/lib/firmware/ath10k/QCA6174/hw2.1/notice.txt_SW_RM.1.1.1-00157-QCARMSWPZ-1

md5sums of files in linux-firmware (version 20151207.bbe4917-1):
$ md5sum /usr/lib/firmware/ath10k/QCA6174/hw2.1/*
461e7f4b2f32f1c4ef50d26f76b715eb /usr/lib/firmware/ath10k/QCA6174/hw2.1/board.bin
8f5303e4b1afc818798425a700139133 /usr/lib/firmware/ath10k/QCA6174/hw2.1/firmware-5.bin
520e814a78b09b4e29c65ba3ddac5631 /usr/lib/firmware/ath10k/QCA6174/hw2.1/notice_ath10k_firmware-5.txt

Neither of this variants work.

#16 2015-12-22 21:41:05

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

i am beginning to wonder if the ath10k drivers are in some unstable state in the latest kernels. The latest backports don’t have an option for ath10k like it has in the past

#17 2015-12-23 10:55:55

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

My wifi is working for now with atondwals files. Do not know if it is due to the fact that I have installed crda package and uncommented WIRELESS_REGDOM=»RU» in /etc/conf.d/wireless-regdom.
But in dmesg there are still error messages about direct firmware loading failed.
$ dmesg —color=always | grep ath
[ 6.446783] ath10k_pci 0000:02:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[ 6.772610] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 6.835339] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:0041:17aa:3545.bin failed with error -2
[ 6.835342] ath10k_pci 0000:02:00.0: failed to load spec board file, falling back to generic: -2
[ 8.158533] ath10k_pci 0000:02:00.0: qca6174 hw2.1 (0x05010000, 0x003405ff, 168c:0041:17aa:3545 fallback) fw atheros-12.0.0.102-fw api 5 htt-ver 3.25 wmi-op 4 htt-o raw 0 hwcrypto 1 features
[ 8.158537] ath10k_pci 0000:02:00.0: debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.228064] ath: EEPROM regdomain: 0x6c
[ 8.228067] ath: EEPROM indicates we should expect a direct regpair map
[ 8.228068] ath: Country alpha2 being used: 00
[ 8.228069] ath: Regpair used: 0x6c
[ 8.285586] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 34.018202] ath10k_pci 0000:02:00.0: no channel configured; ignoring frame(s)!
[ 34.070183] ath10k_pci 0000:02:00.0: no channel configured; ignoring frame(s)!
[ 85.999585] ath: EEPROM regdomain: 0x8283
[ 85.999587] ath: EEPROM indicates we should expect a country code
[ 85.999589] ath: doing EEPROM country->regdmn map search
[ 85.999590] ath: country maps to regdmn code: 0x3
[ 85.999590] ath: Country alpha2 being used: RU
[ 85.999591] ath: Regpair used: 0x3
[ 85.999592] ath: regdomain 0x8283 dynamically updated by country IE

#18 2015-12-23 22:30:54

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

Those firmware errors are normal as those firmware files don’t exist yet but could in future kernels depending on new Atheros wifi cards.

#19 2015-12-23 22:39:56

Re: [solved] Wifi firmware for QCA61x4 Qualcomm Atheros network adapter

Thank you for information and big thanks for your help.
I will mark topic as solved.

Источник