Archer t2u nano arch linux

установка драйвера tp link t2u nano в arch

в арче не работает, сети видит, но подключаться отказывается почему-то. системой определяется как tp link ac600 realtek rtl8811au

Как вы устанавливали драйвер?

по ссылке инструкция с зеленой галочкой. на арче аналогично делал

Ядро 5.12? Если да, то тебе нужно этот патч накладывать.

да, оно самое. извиняюсь за тупой вопрос, но как его наложить?

Там же драйвер для rtl8812au.

А вам, думаю, надо это.

Error! Module version v5.6.4.2_35491.20191025 for 88XXau.ko.xz is not newer than what is already found in kernel 5.12.11-arch1-1 (v5.6.4.2_35491.20191025).

при сборке в дкмс выдает это(

Это тот же самый драйвер.

Это тот же, на заметил. Значит то, что говорит тов. Kron4ek или установить лтс-ядро.

Вижу, действительно, не тот репозиторий открыл.

Нет результата почему-то. Применяю патч, делаю sudo make dkms_install и ничего

Что-то не так делаешь значит, либо у тебя в чем-то другом проблема. Попробуй LTS ядро.

А старый модуль удалил перед установкой патченой версии?

вай фай появляется на доли секунд, работает, но потом выскакивает ошибка и так по кругу. на лтс ядре аналогично

Источник

[РЕШЕНО] Не подключается к WiFi TP-Link AC600 Archer T2U Nano

# 4 месяца назад (отредактировано 3 месяца, 2 недели назад) И так, есть USB WiFi адаптер, и телефон раздающий интернет. Установил драйвера с https://github.com/aircrack-ng/rtl8812au
Дрова поставились, смотрю в NetworkManager, есть список wifi сетей, и там есть моя
Уже обрадовался, подключаюсь к wifi, требует пароль, пишу. Он пытается подключится, и ничего
Убрал пароль в WiFi, подключаюсь, в телефоне вижу в списке подключенных устройств мой компьютер, появился MAC адрес, но не IP, и снова не подключился. Что такое? Может проблема в драйверах? Тогда какие ставить
Информация из lsusb если надо
# 4 месяца назад (отредактировано 4 месяца назад)

установите какой-нибудь другой драйвер, там их вроде несколько и написано что:

As others have noted, people using NetworkManager need to add this stanza to /etc/NetworkManager/NetworkManager.conf

Не получается пока, уже 6 драйверов перебрал lspci | grep Network
03:00.0 Network controller: xxxx.
lspci -vnn -s 03:00.0

vasek
lspci | grep Network
03:00.0 Network controller: xxxx….
lspci -vnn -s 03:00.0

lspci | grep Network
➜

lspci -vnn -s 03:00.0

ну если он всё-таки видит сеть, то можно попробовать использовать что-нибудь попроще, wpa_suplicant и dhcpcd или вообще статику.
# 4 месяца назад (отредактировано 4 месяца назад)

indeviral
ну если он всё-таки видит сеть, то можно попробовать использовать что-нибудь попроще, wpa_suplicant и dhcpcd или вообще статику.

# 4 месяца назад (отредактировано 4 месяца назад)

ну для начала останавливаем nm
ну и если без ошибок отправляете в фон &
запускаем
# 4 месяца назад (отредактировано 4 месяца назад)

тогда полный вывод lspci

PS — просто интересно, что это за device

# 4 месяца назад (отредактировано 4 месяца назад)

тогда полный вывод lspci

© 2006-2021, Русскоязычное сообщество Arch Linux.
Название и логотип Arch Linux ™ являются признанными торговыми марками.
Linux ® — зарегистрированная торговая марка Linus Torvalds и LMI.

Источник

Установка tp-link archer t2u v3

Как установить usb vifi адаптер , он есть в системе , но не работает [email protected]:

$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 010: ID 0458:7076 KYE Systems Corp. (Mouse Systems) Genius FaceCam 312
Bus 001 Device 009: ID 2357:011f TP-Link 802.11ac WLAN Adapter
Bus 001 Device 007: ID 13fe:5500 Kingston Technology Company Inc. Flash drive
Bus 001 Device 005: ID 0e8d:1806 MediaTek Inc. Samsung SE-208 Slim Portable DVD Writer
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[email protected]:

Если загуглить tp-link archer t2u v3 linux driver, будет не мало дельных ссылок на решение вопроса, но проверить их сможете только вы, или другой страждущий, но не я, или любой другой с этого форума, у коих такого адаптера нет в наличии.

Вот так нужно установить драйвер find /lib/modules/`uname -r` -name «*.ko» | grep 8812
lsmod | grep «8812\|rlt»
sudo apt install git build-essential libelf-dev linux-headers-`uname -r` debhelper dpkg-dev dkms bc
git clone https://github.com/aircrack-ng/rtl8812au
cd rtl*
sudo make dkms_install и всё работает и в 20.04 и в 20.10 и в 21.04

Ну, вот видишь, не долго пришлось страдать, нужно было только руку приложить, и тему можно было не заводить.

С наступающим, дружище Владимир!

Помогло. Всё работает.
Система Ubuntu 20.04.1 LTS 64-бит.
Адаптер tp-link archer t2u nano ver. 1.0
Драйвера встали, адаптер нашёлся, сеть поиймал.
Спасибо большое.

ЗЫ
Я новичок в linux и, если честно, при установке драйверов немного напрягает сначала ввод в терминале непонятных команд (. git build-essential libelf-dev linux-headers-`uname. ), потом быстрый листинг проводимых операций (что происходит не ясно), и, в завершении, установка непоятно чего и непонятно куда.
Но всё работает. Надеюсь, со временем, разберусь.
Ещё раз спасибо!

Источник

Driver for tp-link Archer T2U Nano

Borgensgaard2

New Member

Hi,
I’ve just bought this amazing new computer and had a wizard put Linux on it, so I can liberate myself from this Windows 10 hell..
I receive internet through a tp-link, have downloaded the driver for windows 10 and It works.. But I am having trouble finding and downloading a driver for Linux..

When I go to the link (jeremyb31 on GitHub) for the driver I can´t figure out to locate the driver and download it..

Can somebody point my in the direction of a driver that will work, and give a newbie a few clues on how to activate it, so I can be up an running to discover Linux asap?

Thank you for you time and your help!
Kind regards Jonas

KGIII

Super Moderator

We need to know what distro you’re using, but I’m going to assume it’s a Debian derivative.

You don’t need to point your browser there to install it. The author tells you how to install it.

It’s probably CTRL ALT T, but open your terminal — your command line interface.

Copy/paste each of those, one line at a time, and press enter between each of them. You will be asked for your password. Type it out. Nothing will appear on the screen as you type it (for many distros). This is perfectly normal. Just type it and press enter.

Repeat that for each line. Each line will not always ask you to type your password.

What does it do?

1. It installs git and dkms. You’ll need the first to interact with GitHub and the latter to write kernel changes.
2. This clones the git — moving the data on their site to your computer.
3. That changes directory to the directory you just created in the above step.
4. The ‘sudo’ elevates your permissions to be able to use the script you downloaded and then it runs the script with those elevated permissions.

Borgensgaard2

New Member

Hi, thank you for your response!

My distro is Mint 20 Ulyana..

I copy/pasted all four lines, but on the last one it responded with the following:

Kernel preparation unnecessary for this kernel. Skipping.

Building module:
cleaning build area.
‘make’ -j6 KVER=5.4.0-53-generic KSRC=/lib/modules/5.4.0-53-generic/build. (bad exit status: 2)
Error! Bad return status for module build on kernel: 5.4.0-53-generic (x86_64)
Consult /var/lib/dkms/rtl8812au/5.3.4/build/make.log for more information.
Finished running dkms install steps.

— What could be my next move?

Again, thank you!

f33dm3bits

Gold Member

Borgensgaard2

New Member

f33dm3bits

Gold Member

Borgensgaard2

New Member

Ah, yes of course.. I’m an idiot.
IT brings up a long text!

Источник

Install TP-Link AC600 Archer T2U Nano WiFi USB Adapter In Linux

In this brief guide, I will explain how to install TP-Link AC600 Archer T2U Nano WiFi USB adapter in Fedora, Ubuntu and openSUSE Linux distributions and how to connect to 5G Wireless Internet connection.

Introduction

A few days ago, I switched to Jio Fiber 5G broadband connection. The Internet provider gave me a dual band router that supports both 2.4 GHz and 5 GHz channel.

Unfortunately, the built-in WiFi network interface in my Laptop doesn’t support 5 GHz channel. It is bit old Dell Laptop that supports 2.4 GHz channel only.

After doing a lot of web search, I bought TP-Link AC600 USB WiFi Adapter (Archer T2U Nano) from Amazon.

Compared to other WiFi USB network adapters, the TP-Link AC600 Archer T2U model has many advantages. It is tiny, compact and high speed WiFi adapter that supports 2.4 GHz and 5 GHz band.

It is capable to provide 433 Mbps speed on 5GHz (ideal for HD streaming and online gaming) and 200Mbps on 2.4GHz (perfect for normal web browsing).

Archer T2U nano adapter supports 64/128-bit WEP, WPA/WPA2, and WPA-PSK/WPA2-PSK encryption standards. So your wireless connections are safe from intruders.

Another notable advantage of Archer T2U nano WiFi USB adapter is it supports WiFi roaming. It automatically connects to the suitable WiFi network near you.

If you are ever looking for a dual-band WiFi router for faster speed and extended range, TP-Link AC600 Archer T2U Nano WiFi USB adapter is undoubtedly good choice.

Even though Archer T2U nano adapter has some good features, it has one drawback. It supports Windows and Mac OS only. There is no official drivers for Linux.

Fortunately, I came across an unofficial driver for Archer T2U Nano on GitHub and it works out of the box on Fedora and Ubuntu systems.

Install TP-Link AC600 Archer T2U Nano WiFi USB Adapter In Linux

As stated already, Archer T2U nano works well both on Fedora, Ubuntu and openSUSE Linux distributions. First, we will see how to install TP-Link AC600 Archer T2U Nano wifi adapter on Fedora.

1. Install TP-Link AC600 Archer T2U Nano on Fedora

First, check if the TP-Link Archer T2U is detected on your Fedora system by listing the USB devices using command:

Sample output:

List USB devices in Linux

As you can see, TP-Link AC600 Archer T2U nano model wireless card is detected. Let us go ahead and install Archer T2U nano driver in Linux.

Before installing the Archer T2U nano driver, make sure you have installed the correct Kernel header files using command:

If your Kernel and Kernel headers’ version are different, the TP-Link WiFi card driver will not work. So it is mandatory to install the correct Kernel header files .

Next install the dkms package which is used automatically recompile and install a kernel module when a new kernel gets installed or updated.

To install dkms in Fedora, run:

Since we are going to compile the drivers from source, we need to install make and git :

Next, git clone the rtl8812au GitHub repository:

Sample output:

The rtl8812au GitHub repository contains RTL8812AU/21AU and RTL8814AU drivers with monitor mode and frame injection.

The above command clones the contents of rtl8812au GitHub repository in a local directory named rtl8812au . Cd into the cloned directory:

Run the following command to compile and install TP-Link AC600 Archer T2U Nano WiFi USB adapter in your Fedora system:

Sample output:

Install TP-Link AC600 Archer T2U Nano WiFi USB adapter in Fedora Linux

Once the driver is installed, remove the USB adapter and plug in again. The LED in the Archer T2U nano adapter will start to blink.

You can verify if the Archer T2U nano driver (i.e. RTL8812AU ) is installed and loaded with command:

If you see an output like below, congratulations! TP-Link AC600 (Archer T2U Nano) Wireless adapter has been successfully installed!

2. Install TP-Link AC600 Archer T2U Nano on Ubuntu

Installing TP-Link AC600 Archer T2U nano wifi USB adapter in Ubuntu is same as above.

Install the necessary dependencies and Kernel headers in Ubuntu Linux with command:

Git clone the rtl8812au GitHub repository:

Cd into the cloned directory:

Finally, install TP-Link AC600 Archer T2U Nano WiFi USB adapter in Ubuntu using command:

Unplug the TP-Link Archer T2U nano adapter and plug it again. The LED will start to blink. Verify if the driver is installed and loaded using command:

If the TP-Link AC600 WiFi USB adapter is installed, you will see the following output:

3. Install TP-Link AC600 Archer T2U Nano on openSUSE

Install Kernel headers and all necessary prerequisites on your openSUSE machine:

Git clone the rtl8812au GitHub repository:

Cd into the cloned directory:

Run the following command to install TP-Link AC600 Archer T2U Nano WiFi USB adapter in openSUSE:

Remove he TP-Link Archer T2U nano adapter and plug it again. The LED will start to blink. Verify if the driver is installed and loaded using command:

If the TP-Link AC600 WiFi USB adapter is installed correctly, you will see the following output:

Connect to 5G Wireless network in Linux

Open System Settings in your Linux machine. Under WiFi section, you will see there are two WiFi adapters listed. One is built-in WiFi interface and another one is TP-Link AC600 Archer T2U nano USB WiFi adapter.

Click the TP-Link card and you will see the list of available 5G wireless connections. Choose a 5G network in the list and click Connect.

Connect to 5G Wireless network in Linux

Alternatively, you can connect to 5G WiFi network from the Gnome Top bar menu as well. Open the pop out menu from the Top bar, and click «Select Network» option.

Select WiFi network from topbar menu in Linux

Choose the 5G wifi network in the list and click Connect.

Connect to 5G wifi network

That’s it. Start using High Speed 5G Internet connection in your laptop/desktop.

To view the list of WiFi connections from the command line, run:

Here is my Internet speed on 2.4 GHz and 5 GHz Wireless adapters.

Internet speed on 2.4 GHz (onboard WiFi):

Internet speed on 2.4 GHz WiFi in Linux

Internet speed on 5 GHz (TP-Link AC600 Archer 2TU Nano WiFi USB adapter):

Internet speed on 5 GHz (TP-Link AC600 Archer 2TU Nano) WiFi in Linux

I have been using TP-Link AC600 Archer T2U Nano WiFi USB adapter in my Dell Laptop for the past few days. So far it works just fine and I don’t have any issues with it.

If you want to connect to 5G networks in your legacy Laptop or Desktop, just buy TP-Link AC600 Archer T2U Nano WiFi USB adapter or any other 5G supported WiFi adapter and enjoy High Speed Internet connectivity.

Источник