Arduino ide download linux

How to Install Arduino Software (IDE) on Linux

Arduino is a widely-used, open-source electronics platform used to create devices that interact with their environment using sensors and actuators. It consists of a programmable hardware board and a software (Integrated Development Environment(IDE)) for writing and uploading programs to the board.

Before you can start building projects using Arduino, you need to set up the IDE to program your boards. The Arduino (IDE) is a free open-source and cross-platform desktop application that allows you to write code and upload it to the board. It runs on Linux, Windows, and Mac OS X, and Linux.

In this article, we will explain how to install the latest version of the Arduino Software (IDE) on Linux machines.

Installing Arduino IDE on Linux Systems

The Arduino Software (IDE) is a package that does not require any particular process for the various Linux distributions. The only needed requirement is the 32-bit or 64-bit version of the operating system.

Download the Arduino Software (IDE)

Go to the download page and grab the latest version (1.8.12 at the time of writing) of Arduino Software (IDE) for your supported system architecture. You can choose between the 32-bit, 64-bit, and ARM versions, as it is very crucial to select the right version for your Linux distribution.

Alternatively, you can use the following wget command to download the Arduino Software (IDE) package directly on the terminal.

Download Arduino IDE in Linux

Next, extract the downloaded archive file using the tar command.

Extract Arduino IDE in Linux

Run Arduino IDE Install Script

Now move into the extracted arduino-1.8.12 directory and run the installation script with root privileges as shown.

Install Arduino IDE in Linux

Once the installation is done, a desktop icon will be created on your desktop, to launch the IDE, double click on it.

Running Arduino IDE in Linux

It might happen that, you will get an error “Error opening serial port” while uploading a sketch after you have selected your board and the serial port. To fix this error, run the following command (replace tecmint with your username).

Besides, if you have a good internet connection, you can use the Arduino Web Editor (which has an up-to-date version of the IDE). The advantage with it is that it allows you to save your sketches in the cloud, and have them backed up, making them accessible from any device.

That’s it for now! For more information and advanced usage instructions, see the Arduino documentation. To reach us, use the feedback form below.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник

Arduino ide download linux

This is happening because the IDE doesn’t have sufficient permissions to access the Arduino device.

Permissions

We can look at the Arduino device by running

in a terminal. The output looks mostly like this:

The ‘0’ at the end of ‘ACM’ might be different, and multiple entries might be listed, but the parts we need to focus on are the string of letters and dashes in front, and the two names root and dialout .

The first name root is the owner of the device, and dialout is the owner group of the device.

The letters and dashes in front, starting after ‘c’, represent the permissions for the device by user: — The first triplet rw- mean that the owner ( root ) can read and write to this device — The second triplet rw- mean that members of the owner group ( dialout ) can read and write to this device — The third triplet — means that other users have no permissions at all (meaning that nobody else can read and write to the device)

In short, nobody except root and members of dialout can do anything with the Arduino; since we aren’t running the IDE as root or as a member of dialout , the IDE can’t access the Arduino due to insufficient permissions.

Adding yourself to the dialout group

But wait! Earlier, when we were launching the IDE, we did add ourselves to the dialout group!

So why does the IDE still not have permission to access the Arduino?

The changes that the prompt makes don’t apply until we log out and log back in again, so we have to save our work, log out, and log back in again.

After you log back in and launch the Arduino IDE, the Serial Port option should be available; change that, and we should be able to upload code to the Arduino.

5. That’s all folks!

Congratulations, you made it!

You’ve just installed the Arduino IDE on your computer; you’ve also learned how permissions and groups work in Linux!

Источник

Среда разработки Arduino IDE

Мы решили сэкономить вам пару кликов и разместить у себя свежие версии среды Arduino IDE, потому что на официальном сайте порой чёрт ногу сломит, пока найдёт нужную ссылку. Где скачать Arduino IDE — ваш выбор: файлы дистрибутивов абсолютно идентичны. Сейчас представлена стабильная версия Arduino IDE 1.8.16 (релиз от 06.09.2021) и бета-версия 2.0.0 (релиз beta.11 от 25.08.2021).

Скачать для Windows

• Инсталлятор для Windows — Windows XP, Windows 7, Windows 8, Windows 10 и выше.
• Архив ZIP для Windows — установка без прав админа, портативная версия для флешки.
• Приложение для Windows 8.1/10 в Microsoft Store

Скачать для macOS

• App для macOS — macOS X 10.8 Mountain Lion или новее.

Скачать для Linux

Для установки из архива в общем случае нужно выполнить следующие команды.

В отдельных дистрибутивах Linux проще воспользоваться командой установки из пакетов.

Как переключить язык

Arduino IDE при установке выбирает язык системы по умолчанию. Если вам понадобится переключить интерфейс на другой язык, это можно сделать в общих настройках программы.

1. Заходим в главном меню в пункт «Файл → Настройки».
2. Выбираем нужный язык в выпадающем списке «Язык редактора».
3. Перезапускаем среду.

Бета-версия 2.0

• Инсталлятор для Windows (64 бита) — Windows 10 (x86-64) и новее.
• Архив ZIP для Windows (64 бита) — установка из архива.
• Архив Linux (64 бита) — версия для Linux-систем с архитектурой x86-64.
• Приложение для macOS — macOS X 10.14 Mojave (64 бита) или новее.

Поддерживаемые платы

Arduino IDE из коробки работает со всеми оригинальными платами AVR-архитектуры и их прямыми аналогами.

Также поддерживаются сторонние платы и контроллеры на других архитектурах: SAM, SAMD, Cortex-M. Они добавляются в среду отдельными пакетами. Ниже перечислены примеры установки некоторых таких плат.

Источник

Downloads

Arduino IDE 1.8.16

The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. This software can be used with any Arduino board.

Refer to the Getting Started page for Installation instructions.

SOURCE CODE

Active development of the Arduino software is hosted by GitHub. See the instructions for building the code. Latest release source code archives are available here. The archives are PGP-signed so they can be verified using this gpg key.

DOWNLOAD OPTIONS

Hourly Builds

Download a preview of the incoming release with the most updated features and bugfixes.

DOWNLOAD OPTIONS

Previous Releases

Download the previous version of the current release, the classic 1.0.x, or old beta releases.

DOWNLOAD OPTIONS

Arduino with Chromebook

To program Arduino from a Chromebook, you can use the Arduino Web Editor on Arduino Cloud. The desktop version of the IDE is not available on Chrome OS.

Experimental Software

Arduino IDE 2.0 beta (2.0.0-beta.12)

The new major release of the Arduino IDE is faster and even more powerful! In addition to a more modern editor and a more responsive interface it features autocompletion, code navigation, and even a live debugger.

Note: this software is still in beta status, which means that it’s almost complete but there might be minor issues. Help us test it and report your feedback in the forum!

You can also find more information about the release here.

SOURCE CODE

The Arduino IDE 2.0 is open source and its source code is hosted on GitHub.

DOWNLOAD OPTIONS

Nightly Builds

Download a preview of the incoming release with the most updated features and bugfixes.

Other Downloads

OpenWRT — Yún 1.5.3 Upgrade Image

Download the latest stable GNU/Linux OS for your Yún. It makes your Yún more stable and feature rich.

Easy Installation Procedure (recommended)

Advanced Installation Procedure

This procedure is only recommended to advanced users who wish to completely re-flash the Yún including its U-Boot bootloader. These instructions on reflashing the base images are for reference only. Following them will void your Yún’s warranty.

Terms of Service

By downloading the software from this page, you agree to the specified terms.

The Arduino software is provided to you «as is» and we make no express or implied warranties whatsoever with respect to its functionality, operability, or use, including, without limitation, any implied warranties of merchantability, fitness for a particular purpose, or infringement. We expressly disclaim any liability whatsoever for any direct, indirect, consequential, incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data, regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility or likelihood of such damages.

Источник

Downloading and installing the Arduino IDE 2.0

In this tutorial, we will show how to download and installing the Arduino IDE 2.0 on your Windows or Mac computer.

You can easily download the editor from the Arduino Software page.

Requirements

• Windows — Win 10 and newer, 64 bits
• Linux — 64 bits
• Mac OS X — Version 10.14: «Mojave» or newer, 64 bits

The Arduino IDE 2.0

The Arduino IDE 2.0 is an open-source project, currently in its beta-phase. It is a big step from it’s sturdy predecessor, Arduino IDE (1.8.13), and comes with revamped UI, improved board & library manger, autocomplete feature and much more.

In this tutorial, we will go through step by step, how to download and install the software.

Download the editor

Downloading the Arduino IDE 2.0 is done through the Arduino Software page. Here you will also find information on the other editors available to use.

Installation

Windows

To install the Arduino IDE 2.0 on a Windows computer, simply run the file downloaded from the software page.

Follow the instructions in the installation guide. The installation may take several minutes.

You can now use the Arduino IDE 2.0 on your Windows computer!

Mac OS X

To install the Arduino IDE 2.0 on a Mac OS X computer, simply copy the downloaded file into your application folder.

You can now use the Arduino IDE 2.0 on your Mac OS X computer!

Linux

To install the Arduino IDE 2.0 on a Linux machine, simply extract the downloaded file to a suitable folder.

Now, go to the folder where you extracted the contents to, and look for the arduino-ide file, which will launch the IDE.

You can also run the file directly in the terminal, navigate to the folder, right click on it and select run in terminal.

To launch the editor through the terminal, simply type:

More tutorials

Once you are finished with the download & installation, you can start using the Arduino IDE 2.0. Below are a collection of tutorials that will show you how to use the different features.

Источник