Bluetooth adapter usb linux

USB-адаптер для Bluetooth 4.0+

Хотел бы узнать, есть ли в наших магазинах USB-адаптеры для bluetooth стандарта 4.0+, без проблем работающие (в основном, для наушников) в линуксе (ubuntu, arch) ?

В природе, как сказано по этой ссылке, такие устройства есть, и их даже можно купить на Али по приемлемым ценам. Вероятно, даже закажу себе одно такое.

Однако срок доставки 25/05/2020 — это как-то очень долго.

Ищите лучше. Ко мне из магазина UGreen на Алиекспресс это пришло за 2 недели. Раз Bluetooth адаптер на контроллере CSR, то будеи работать в Linux.

взял bt4-свисток от hama, никогда никаких проблем не имел

и судя по тому, как оно определяется линуксом — это как раз копеечный китайский ноунэйм

Раз Bluetooth адаптер на контроллере CSR

не-е-е. Позавчера купил в ближайшем ДНСе DEXP AT-BT401, дык, оно, хоть и увиделось в линуксе, но не заработало, на трех разных компах ни в линуксе (5.5.13-arch2-1), ни в винде (Win8, Win10). В Win8 даже дрова поставил с сайта, не помогло. Теряет коннект после секунды-двух воспроизведения звука. Вернул обратно в магазин.

Поэтому и спросил здесь, чтобы не бегать кругами лишний раз.

У меня который из UGreen, зарвботал в Ubuntu 18.04 без установки дополнительного драйвера.Это потому, что драйвер для контроллера CSR в ядре.

DEXP это не китайская, а российская торговая марка магазина DNS. То есть,продукция из Китая конечно, но неизвестно что.

Источник

Best USB Bluetooth Adapters that are Linux-compatible

Jan 29, 2020
Comment

Do you want to add Bluetooth support to your Linux desktop or laptop? If so, consider getting a USB Bluetooth adapter. They’re inexpensive and a great way to add Bluetooth connectivity with ease.

Finding a Linux-compatible Bluetooth adapter is hard work, as not many manufacturers support Linux out of the box. Due to how difficult it is to find an adapter, we’ve made a list of the four best USB Bluetooth adapters that are Linux-compatible.

#1 – Plugable USB Bluetooth 4.0 Low Energy Micro Adapter

• Works out of the box
• Nano design
• Multiple devices at once.

If you’re looking for the best Bluetooth USB adapter available for Linux, look no further than the Plugable USB Bluetooth adapter. Why? It has official Linux support and works well on Ubuntu, Linux Mint, Fedora, Arch Linux, and even other, lesser-known Linux distributions.

The Pluggable USB adapter runs Bluetooth 4.0 tech, which allows it to have multiple devices connected at one time. Bluetooth 4.0 also means that it uses less power, which will save battery life if you run it on a Linux laptop.

We’ve tested Pluggable’s USB adapter, and it works best with USB 2.0 ports, as 3.0 interferes with the device’s radio signal. However, despite the issues with 3.0, it remains the best Bluetooth USB adapter for Linux users.

Notable features

• The Plugable USB Bluetooth adapter works out of the box on nearly all Linux operating systems, with zero setup process required.
• The Plugable USB Bluetooth sports a “nano” design and will fit into any USB port without disrupting the cables around it.
• Can handle multiple devices connected at one time.

The Plugable USB Bluetooth 4.0 Low Energy Micro Adapter is priced very inexpensively, for what it offers. If you’re in the market for a Bluetooth adapter, do yourself a favor and check out this one!

#2 – ideapro USB Bluetooth adapter

• Works on both USB 3.0 and 2.0 ports
• Low power consumption (USB 4.0)
• For conventional Linux desktop OS

The ideapro USB adapter is a slim, Bluetooth device that works on Mac, Linux, Windows, and the Raspberry Pi. The device runs Bluetooth 4.0, like most modern adapters, and as a result, is very efficient in power usage and has an exceptional wireless range.

This dongle is targeted at Raspberry Pi users running Linux, and the will “just work” when plugged into the Pi 1, Pi 2, Pi 3, or Pi 4. However, in our testing, we found that it will also run on just about any computer running a conventional Linux operating system.

Ideapro’s USB dongle isn’t the best to go with if you’re looking for an adapter that works only on a Linux PC. However, if you plan to use this device on both the Raspberry Pi and a Linux computer, it’s a great choice!

Notable features

• It not only works well with conventional Linux desktop operating systems. The ideapro USB Bluetooth adapter also works very well with the Raspberry Pi 1, Pi 2, Pi 3, and Pi 4.
• The device works very well in both USB 3.0 and 2.0 ports.
• Thanks to Bluetooth 4.0, it uses very little energy.

The ideapro USB Bluetooth adapter is very inexpensive for what it offers to the consumer. Considering it has support for the Raspberry Pi, it’s a steal. So, if you’re using Linux as well as the Raspberry Pi and need a suitable Bluetooth adapter, give this one a go!

#3- Kinivo BTD-400 USB Bluetooth Adapter

• 32-bit and 64-bit Linux
• Works up to 30ft.
• A bit on the expensive side.

The Kinivo BTD-400 USB Bluetooth adapter works very well on the Raspberry Pi, and as a result, is one of the most popular dongles in the Linux community. However, it also works incredibly well with conventional computers running Linux, and even has official support for popular distributions such as Fedora, Ubuntu, and others.

Like many USB dongles on the market today, the Kinivo BTD-400 uses Bluetooth 4.0. As a result, it can handle multiple devices connected at a time and uses a low amount of power. 4.0 also means that the Kinivo BTD-400 can keep wireless devices connected up to 33 FT (10 M).

In our testing with the Kinivo BTD-400 USB Bluetooth, we found that it, like the Plugable USB Bluetooth adapter, has issues when used in a USB 3.0 port, as it causes radio interference. Still, as it has official Linux support from the company, it remains a good choice for Linux users.

Notable features

• The Plugable USB Bluetooth adapter works with both 32-bit and 64-bit operating systems.
• The Plugable USB Bluetooth adapter has a wireless connectivity range of up to 30 feet (10 meters).
• The Kinivo BTD-400 USB Bluetooth Adapter is fully compatible with older Bluetooth devices.

As far as Bluetooth USB adapters go, the Kinivo BTD-400 does not have a cheap price tag. Other adapters on this list are much less expensive. Still, if you need a proper adapter that works well with Linux on both 32-bit and 64-bit, this device is worth it.

#4 – ZEXMTE Bluetooth USB adapter

• Transmision rate up to 3 Mbps
• Nano form, low power usage.
• Lifetime warranty.

The ZEXMTE Bluetooth adapter is a small dongle for Windows. However, thanks to Linux developers and contributors, support for the device is now in the kernel, and it works very well.

ZEXMTE uses Bluetooth 4.0 technology, which is typical for adapters. Thanks to Bluetooth 4.0, you’ll be able to connect multiple wireless devices and enjoy very efficient power usage and range.

Although ZEXMTE has not added that has official Linux support in their product description, our in-depth testing of the device shows that it works well with the Linux platform, and will handle wireless devices well on your Linux PC!

Notable features

• The ZEXMTE Bluetooth USB adapter supports a data transmission rate of up to 3 Mbps.
• Nano form-factor makes it perfect for laptop USB ports, as well as desktop PCs.
• ZEXMTE’s low energy feature saves battery power when used on a laptop.

The ZEXMTE Bluetooth adapter is very similar to all of the other adapters on this list. Nano in form-factor, Bluetooth 4.0, etc. However, it is priced very inexpensively and comes with a lifetime warranty. So, if the other adapters on this list don’t interest you, consider this one.

Conclusion

In this list, we talked about the four best Bluetooth USB adapters that are Linux compatible. However, the four devices on this list aren’t the only ones compatible with the Linux platform. What Linux-compatible Bluetooth USB adapter do you use on your system? Tell us down below in the comment section!

Leave a Reply Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Источник

Best USB Bluetooth Adapters for Linux in 2021

This post may contain affiliate links/ads and I may earn a small commission when you click on the links/ads at no additional cost to you. As an Amazon Affiliate, I earn from qualifying purchases. You can read my full disclaimer here.

Devices like keyboard, mouse, headphones, speakers, controllers etc. use Bluetooth for connectivity and to use these devices with your PC or Laptop, you’ll need Bluetooth support.

Most devices already have integrated Bluetooth support. If your PC/Laptop doesn’t have it already or the integrated Bluetooth doesn’t work with your Linux distro, then you can easily overcome the problem using an External/USB Bluetooth Adapter for Linux.

You can easily find a USB Bluetooth adapter that works with Windows OS but it is difficult to find one that is compatible with Linux distros. Since most manufacturers don’t support Linux out-of-the-box.

But Don’t worry, I have made this list of the best USB Bluetooth adapters for Linux to save you the hassle. Here’s the summary of the best Bluetooth Adapters for Linux.

Bluetooth Adapters for Linux	Link to Product
Plugable USB Bluetooth 4.0 Adapter	See details at Amazon
Kinivo BTD-400 USB Bluetooth Adapter	See details at Amazon
Panda USB Bluetooth 4.0 Adapter	See details at Amazon
Edimax Bluetooth 5.0 Adapter	See details at Amazon
ideapro USB Bluetooth 4.0 Adapter	See details at Amazon

Before Proceeding:

I want you to consider the following things before proceeding with this post:

1. There are many Linux based distros available out there. The Bluetooth adapters mentioned in this post may not work with every Linux distro.

2. On some distros you may have to install the drivers manually to make the Bluetooth adapter work properly.

Check the official site of these USB Bluetooth adapters or contact the manufacturer for detailed information.

Now, let’s look at the best USB Bluetooth adapters for Linux.

5 Best USB Bluetooth Adapters for Linux

1. Plugable USB Bluetooth 4.0 Adapter

The first Bluetooth adapter on this list is the Plugable USB Bluetooth adapter. It works out-of-the-box with most Linux Distros including popular Linux distributions like Ubuntu, Mint, and Fedora.

Plugable USB Bluetooth adapter has a range of 32 feet (10 meters) and is capable of connecting multiple devices simultaneously.

This is a certified class 2 device and has been validated by the Bluetooth Special Interest Group (Bluetooth SIG).

You also don’t have to worry about power consumption or handling of the device. Being a Bluetooth 4.0 device, it consumes less power and because of its tiny design, you can even leave the device connected to your laptop while you are on the move.

This USB Bluetooth adapter is also compatible with Raspberry Pi.

Features of Plugable USB Bluetooth 4.0 Adapter:

• Broadcom BCM20702 Chipset
• Works out-of-the-box with most Linux Systems.
• Nano Design.
• Range up to 32 Feet (10 Meters).
• Connect multiple devices at once.
• Compatible with Raspberry Pi.

2. Kinivo BTD-400 USB Bluetooth Adapter

Kinivo BTD-400 Bluetooth adapter is bundled with a Broadcom chipset and works out-of-the-box with some popular Linux distros including Ubuntu, Linux Mint and Fedora.

This is a class 2 Bluetooth 4.0 adapter with low energy technology and connects with devices within a range of 32 feet (10 meters). It is also fully compatible with older Bluetooth equipment.

Kinivo BTD-400 has a sleek design that ensures that adjacent USB interfaces in a laptop do not get blocked and you can even leave it plugged in while you are on the move.

Apart from being Linux compatible, it also works flawlessly with Raspberry Pi.

Features of Kinivo BTD-400 USB Bluetooth Adapter:

• Broadcom BCM20702 chipset
• Fully compatible with older Bluetooth equipment.
• Compatible with Raspberry Pi.
• Nano Design.
• Range up to 32 Feet (10 Meters).

3. Panda USB Bluetooth 4.0 Adapter

Panda USB Bluetooth 4.0 Adapter is bundled with CSR chipset and works out-of-the-box with many Linux distros including Ubuntu, Mint, Fedora and Kali Linux.

It is a class 2 Bluetooth device and is backwards compatible with older Bluetooth versions. This adapter also has EDR (Enhance Data rate) and Low Energy consumption.

You can pair multiple devices simultaneously and if any connected device is a Bluetooth smart device, you can get a range of approx. 80 feet.

Like all other Linux compatible Bluetooth adapters on this list, this one also has a Nano design, so you can leave it plugged in on your laptop without blocking nearby USB ports.

Panda Bluetooth adapter supports a maximum of 3Mbps transfer rate and is also compatible with raspberry pi.

Features of Panda USB Bluetooth 4.0 Adapter:

• CSR Chipset
• Backward compatibility with Bluetooth versions 2.0/2.1/3.0 devices.
• Bluetooth Smart Ready 4.0 LE+EDR (Low Energy + Enhanced Data Rate).
• Nano Design.

4. Edimax Bluetooth 5.0 Adapter

Unlike other Bluetooth 4.0 adapters on this list, Edimax Bluetooth Adapter uses Bluetooth version 5.0.

Being a Bluetooth 5.0 device you can enjoy 3x faster transfer speeds and almost 4x long-range than Bluetooth 4.0.

This nano-sized adapter consumes less power and is also compatible with previous Bluetooth versions, including v2.1 + LE.

Note that, this is not a plug-and-play adapter; you may have to install drivers manually. Edimax provides official support only for Fedora and Ubuntu (Kernel 2.6.32-5.3) as of writing this post.

Features of Edimax Bluetooth 5.0 Adapter:

• Realtek Chipset
• Nano Size
• Supports dual-mode (BR/EDR + LE Controllers)
• Compatible with previous versions
• Bluetooth version 5.0

5. ideapro USB Bluetooth 4.0 Adapter

The last on this list is ideapro USB Bluetooth Adapter bundled with the CSR chipset.

It uses Bluetooth version 4.0 and is backwards compatible with older Bluetooth versions (v3.0/2.1/2.0/1.1).

Being a Bluetooth 4.0 device, it consumes less power and has a range of 32 feet (10 Meters). Due to its compact design, it seamlessly gets plugged into a computer/laptop without blocking surrounding USB ports.

You can use this device on both Raspberry Pi and a Linux computer. Moreover, it works out-of-the-box with most Linux distros including Ubuntu and Linux Mint.

Features of ideapro USB Bluetooth 4.0 Adapter:

• CSR Chipset
• Range up to 32 Feet (10 Meters).
• Backwards compatible with Bluetooth V3.0/2.1/2.0/1.1.
• WLAN coexistence interface.
• Dual-mode Bluetooth transfer.
• Plug and Play on most Linux distros and Raspberry Pi.

Conclusion

That’s it for the best USB Bluetooth adapters for Linux. You can also install Blueman Bluetooth Manager to use the Bluetooth feature efficiently.

By the way, the above-mentioned adapters also work with Windows OS.

If you have used any other USB Bluetooth adapter on Linux, then do share your experience in the comment section.

Источник