DRIVER UPDATE FOR Broadcom 4313GN 802.11b/g/n 1×1 Wi-Fi Adapter
10-05-2018 09:06 PM
- Mark as New
- Bookmark
- Subscribe
- Permalink
- Email to a Friend
- Flag Post
I have a HP Pavilion g4 Notebook PC, the details of which I am appending below :
Windows 7 Home Basic 64-bit Service Pack 1
x64 — based PC
6.1.7601.Service Pack 1 Build 7601
Processor. Intel(R) Core(TM) i5 2430M CPU @ 2.40 HGz, 2401 Mhz, 2 Cores, 4 Logical Processors
SMBIOS Version 2.7
Bios version date Insyde F.66 24th January, 2013
Installed Physical memory 8.00 GB
Page File C:\pagefile.sys
I use a wireless network connection and the device used is » Broadcom 4313GN 802.11b/g/n 1×1 Wi-Fi Adapter » , the details of which are as under.
Driver Provider.. Broadcom
Driver Date
20th May, 2011
Driver Version
PCI Bus 1, device 0, function 0
I would request esteemed members of the HP Forum to please help me from where I can update the driver for » Broadcom 4313GN 802.11b/g/n 1×1 Wi-Fi Adapter «. I would be grateful if someone can give me the link from where I can download the latest driver.
10-05-2018 09:36 PM
- Mark as New
- Bookmark
- Subscribe
- Permalink
- Email to a Friend
- Flag Post
@Mandira, welcome to the forum.
Here is the latest driver that is available from HP. As you will see, it is dated in 2012. HP is not issuing any software or driver updates for computers that were made before 2013.
Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.
I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!
10-05-2018 11:27 PM
- Mark as New
- Bookmark
- Subscribe
- Permalink
- Email to a Friend
- Flag Post
Thank you for your prompt reply. I download the driver software SP 57965.exe for driver version 5.100.82.139 dated 13.07.2012. My earlier driver version was 5.100.82.82. After downloading, when I tried to instal the new driver [ version 5.100.82.139 ] I received the message that this driver is already installed on my system. I am at a loss to understand how and why this has happened. I even tried to overwrite on the old driver, but the computer didnot respond.
Can you please help ?
10-06-2018 12:23 PM
- Mark as New
- Bookmark
- Subscribe
- Permalink
- Email to a Friend
- Flag Post
You are welcome, @Mandira.
I suggest that you double check the version of the current driver to assure that it isn’t the latest one available. If it is not, you should read the Installation information in the link that I provided.
I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!
10-06-2018 11:20 PM
- Mark as New
- Bookmark
- Subscribe
- Permalink
- Email to a Friend
- Flag Post
Thank you so much for your reply. As advised by you, I will go through the installation information and recheck the existing drivers.
Thanking you once again.
10-07-2018 07:16 AM
- Mark as New
- Bookmark
- Subscribe
- Permalink
- Email to a Friend
- Flag Post
See if you can install this driver for your BCM 4313 wifi adapter.
6.30.223.264 Rev.A Sep 30, 2015
The above driver supports these three model variations of the BCM 4313 wifi adapter.
Check your adapter’s hardware ID before installing the driver, and if the ID matches one of these three, it should work.
PCI\VEN_14E4&DEV_4727&SUBSYS_145C103C
PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
PCI\VEN_14E4&DEV_4727&SUBSYS_1795103C
You can find the hardware ID for your Broadcom wifi adapter by going to the device manager, click to expand the Network Adapters device manager category. Click on the Broadcom wifi adapter.
The click on the Details tab at the top of the window. You will see a Property drop down list, and it will be defaulted to Device Description.
Drop down on that list, and select the 2nd item (Hardware ID’s).
The ID will normally be listed 4 times, so just look at the top line.
