Canon pixma ip1600 linux

Canon pixma ip1600 linux

Огромное спасибо за эту информацию! Очень помогло!

Canon IP 1600 без проблем работает спасибо.
Только при добавлении в cups, затормозил, искал дрова в базе данных, а надо ppd файл принтера указать.
Спасибо

Помогите с установкой для Ubuntu Linux 10.10 64bit, очень прошу не оставьте одного, с этою бедой.

А что за проблема-то?

Не ставится, команда sudo alien *i386.rpm не подходит,пробовал менять на 64bit тот же результат? Что делать

как не подходит? что пишет?)

Вот, что пишет- sudo alien *i386.rpm
Аварийное завершение.
dima@dima-home:

Это продолжение после 5 пункта установки-Аварийное завершение.
dima@dima-home:

/canon$ sudo dpkg -i *.deb
dpkg: не удалось обработать параметр *.deb (—install):
нет доступа к архиву: Нет такого файла или каталога
При обработке следующих пакетов произошли ошибки:
*.deb
dima@dima-home:

а попробуй ка sudo alien -d *.rpm

Извините,а что дальше? Подскажите я новичок, в этом деле еще только учусь.Скачал дрова.Если можно все по порядку, думаю я не один такой.

Тоже самое, пробовал все. Хотите продолжить [Д/н]? sudo alien -d *.rpm
Аварийное завершение.

El___ , ты бы может готовые deb выложил, если конвертировал уже.

НИЧЕГО ХОРОШЕГО, НО СПАСИБО ЗА ПОМОЩЬ.

РЕБЯТА ПОМОГИТЕ,внезапно перестал автоматически запускаться CD привод на Linux Ubuntu 10.10, на винде нормально, тут не пойму,что случилось.ПОМОГИТЕ.

Зачем писать в этом посте? Есть же рядом ссылка на форум. И что значит «автоматически запускаться»? Автозапуск / автомонтирование или вообще не видит устройство?

Долго мучался с ip1600 в ubuntu 10.04 amd64 по разным инструкциям!
. Пока не скопировал в папку /usr/lib32/ файл /usr/lib/libpng.so.3 из 32-битной Debian Lenny, на которой же и собирал элиеном пакеты из официальных дров, т.к. на 64-битной системе они собираться отказывались 🙂 32-битным фильтрам от кэнона нужны именно 32-битные библиотеки! Симлинки на 64-битные не подойдут.

У меня на Ubuntu 10.10 не получилось. 🙁 Всё шло нормально до 7-го пункта. У меня файл *.ppd был полностью пустым. Затем, когда я проделал следующие шаги, у меня установился принтер, но не хочет печатать из-за «отсутствия фильтра печати».

Файла на сервері вже не має 🙁

Это в прошлом. Могу посоветовать такой метод:

Скачиваем отсуда, предварительно заполнив поля, турбопринт.
http://www.turboprint.info/download.html

Увы он платный, но у него есть 30 дневная демоверсия. По истечению 30 дней можно его просто переустановить, но между тем, как установить заного придётся очистить некоторые папки командой:

sudo rm -r /var/log/turboprint /usr/share/turboprint/profiles /usr/share/turboprint /etc/turboprint

Программа на английском, не сложная. Вопросов возникнуть не должно =)

Источник

Thread: Canon Pixma iP1600 driver

Thread Tools

Display

Canon Pixma iP1600 driver

Hi. I’m going crazy! I’m new to Linux. I installed Ubuntu, and it recognizes my printer in System/admin/printing. It’s there, but it won’t print. I downloaded a driver, not the exact one but one that supposedly works, but I’m having a hard time installing it. I have it on my desktop. It’s a rpm file and I had to install 7zip to be able to open it, but I don’t know what else to do. I tried to use the terminal but it says the file doesn’t exist. Any help would be appreciated. Thanks!

Re: Canon Pixma iP1600 driver

You need to install the canon ip2200 driver. It will not work on a 64-bit system, though.

Re: Canon Pixma iP1600 driver

I do have the driver file on my desktop. The folder is called ip2200_Linux_260.tar.gz Inside the folder are :

cnijfilter-common-2.60-1.i386.rpm
cnijfilter-common-2.60-1.src.rpm
cnijfilter-ip2200-2.60-1.i386.rpm
cnijfilter-ip2200-lprng-2.60-1.i386.rpm

not sure what to type in terminal to install. I typed in something I found online but it didn’t work. Please help!

Re: Canon Pixma iP1600 driver

Try the instructions in this post here. If that doesn’t work, let us know and we can probably figure it out.

Re: Canon Pixma iP1600 driver

Thanks I’ll try it.

Re: Canon Pixma iP1600 driver

Everything works until I enter this command:

sudo /etc/init.d/cupsys restart

it keeps saying Command Not Found. Everything else went through provided I don’t mispell anything!

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

Printer drivers for Canon Pixma iP1600 (2) (solved).

Printer drivers for Canon Pixma iP1600 (2) (solved).

Post by Wompoo » Wed Feb 21, 2018 1:38 am

Since I installed Linux Mint 18.2 on my Dell 32 bit computer, I have been unable to find the drivers to run this printer. I did have the correct drivers for Mint 17.3.
I experienced frustration finding them before as reported on this thread:

I tried the Gutenprint site and when that did not work, I tried the instructions listed here:

How To — Install Canon PIXMA ip 1800 Printer drivers .

michael-gruz/+ar . non/+index
Which has Ubuntu Canon drivers.
Then click ‘View package details’
Click on cnijfilter-common-3.50-2Ubuntu3
and download the .deb file.
Then go to cnijfilter-common-2.70-3Ubuntu3(5 latest)
and download the ip1800 .deb file.
Now first click on the cnijfilter-common-3.50-2Ubuntu2 file and install
Next install the cnijfilter-common-2.70-3Ubuntu3 file
Reboot your computer, switch on the printer, your printer drivers will now be installed.

This did not work.
Can anyone direct me to a source of drivers that might work?
Perhaps I should go back to my Mint 17.3 operating system in order to use this printer?

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by mrjimphelps » Fri Feb 23, 2018 4:15 pm

If you have the correct driver, then it should work. However, I went to the Canon USA and Canon Asia (Thailand) websites, and there was no Linux driver on either site. (I got a Linux driver for my Canon Pixma MX490 printer/scanner at the Canon Asia (Thailand) website.)

I would try again, this time see if you can find an official set of install instructions from Canon. If you following the official instructions precisely AND if you have the correct driver, then it should work.

I did just what you did the first time — I got the driver and followed some unofficial instructions for installing it. Afterward, my scanner didn’t work. I then got the official instructions from Canon Asia and followed them very carefully, and my scanner started working!

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by Wompoo » Fri Feb 23, 2018 6:32 pm

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by Arch_Enemy » Fri Feb 23, 2018 7:00 pm

It says to use the ip2200 driver.

I have travelled 37629424162.9 miles in my lifetime

One thing I would suggest, create a partition as a 50G partition as /. Partition the rest as /Home. IF the system fails, reinstall and use the exact same username and all your ‘stuff’ comes back to you.

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by Arch_Enemy » Fri Feb 23, 2018 7:03 pm

PS: I have an ip1800 I was FINALLY able to get working with help from some people here. I also have a PRO-100 that is a very heavy paperweight in Linux. Have to boot Windows to print photos.

It would sure be nice if Canon would support Linux again.

I have travelled 37629424162.9 miles in my lifetime

One thing I would suggest, create a partition as a 50G partition as /. Partition the rest as /Home. IF the system fails, reinstall and use the exact same username and all your ‘stuff’ comes back to you.

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by pdc_2 » Fri Feb 23, 2018 7:55 pm

well done to get things working;

so that ip1600 is a 13yr old printer; you are doing very well to keep it working well; and Canon deserve credit for building devices that keep printing year after year; seemingly, no planned obsolescence here; surely that is good;

sadly, Arch Enemy has one of the PRO devices; a very fine printer and a very capable device for the very and capable discerning user; Canon do provide drivers for all of their standard inkjet devices;

and for their lasers, they released a new UFR driver; about ten days ago; to cope with issues that Ubuntu created in 17.10; so in those terms, we should surely give them credit for prompt support;

so it is sad that the PRO devices are not supported; Turboprint do provide a driver; but I think Arch Enemy has reported it wasn’t helpful enough;

the printing world will be changing for Mint with the release in July; where Mint adopts Ubuntu 18.04 which will have airprint support; Ubuntu implemented it in 17.04 a year ago and one can google on the list of printers that are supported; essentially, it seems that all devices made in the last several years will be compatible; no drivers seem needed; the OS will essentially auto-configure and show the printer as «driverless»:

so for those such as Arch Enemy, the Pro100 will be supported in the next release of Mint; by June-July; and I suspect much of what is done will move away from manually installing drivers; to such things as airprint; auto-configure;

similarly Canon now supply one driver for the inkjet range; that seems to cover all the standard releases;

best wishes to all

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by Arch_Enemy » Fri Feb 23, 2018 10:00 pm

well done to get things working;

so that ip1600 is a 13yr old printer; you are doing very well to keep it working well; and Canon deserve credit for building devices that keep printing year after year; seemingly, no planned obsolescence here; surely that is good;

sadly, Arch Enemy has one of the PRO devices; a very fine printer and a very capable device for the very and capable discerning user; Canon do provide drivers for all of their standard inkjet devices;

and for their lasers, they released a new UFR driver; about ten days ago; to cope with issues that Ubuntu created in 17.10; so in those terms, we should surely give them credit for prompt support;

so it is sad that the PRO devices are not supported; Turboprint do provide a driver; but I think Arch Enemy has reported it wasn’t helpful enough;

the printing world will be changing for Mint with the release in July; where Mint adopts Ubuntu 18.04 which will have airprint support; Ubuntu implemented it in 17.04 a year ago and one can google on the list of printers that are supported; essentially, it seems that all devices made in the last several years will be compatible; no drivers seem needed; the OS will essentially auto-configure and show the printer as «driverless»:

so for those such as Arch Enemy, the Pro100 will be supported in the next release of Mint; by June-July; and I suspect much of what is done will move away from manually installing drivers; to such things as airprint; auto-configure;

similarly Canon now supply one driver for the inkjet range; that seems to cover all the standard releases;

best wishes to all

I have travelled 37629424162.9 miles in my lifetime

One thing I would suggest, create a partition as a 50G partition as /. Partition the rest as /Home. IF the system fails, reinstall and use the exact same username and all your ‘stuff’ comes back to you.

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by Wompoo » Sat Feb 24, 2018 4:00 am

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by jimallyn » Sat Feb 24, 2018 4:57 am

Could you be a little more specific about «did not work»? openprinting.org says that printer does indeed work with the Gutenprint drivers:

And I see that a number of Gutenprint packages are available for install in Mint 18.3. (I don’t have 18.2 installed here, but I would assume Gutenprint is available in 18.2 also.) So, please tell us a little more: did you try to install the Gutenprint drivers? If so, what version? From the Mint repos, or from openprinting.org? What happened? Did you get an error message during the install attempt? Or did it install OK, but then not print?

“If the government were coming for your TVs and cars, then you’d be upset. But, as it is, they’re only coming for your sons.” — Daniel Berrigan

Re: Printer drivers for Canon Pixma iP1600 (2)

Post by Wompoo » Sat Feb 24, 2018 6:24 pm

Error notice received: «Missing Printer Driver».

I have tried both methods. I will do it all again and clarify for discussion purposes. Sorry, I have tried so many things and I am bit hazy on what etc.
Will post again after I have tried both sources etc.

Источник