HGE. Can’t create window 🙁

Следующая проблема.
Небольшая игрушка, использующая HGE 1.7.

От клиента пришел лог с ошибкой в HGE: «Can’t create window».

Программа запускается либо в новом окне, либо как windowed. Никаких parent нет.
У меня не воспроизводится в нескольких различных средах 🙁

Кто-нибудь сталкивался с таким? В чем может быть дело?

Единственная идея — конфликт с другой игрой, которая использует HGE.

Единственная идея — конфликт с другой игрой, которая использует HGE.
я смог прекрасно запустить 4 примера с хге причем 2 из них были одинаковыми

а что у него за видюшка ? как минимум что то что dx8 держит нужно — под вмварей (для тестов запускал) оно именно такое в лог и кидает, как включил тестовую поддержку ускорения в варе всё запахало.

zxmd
>а что у него за видюшка ? как минимум что то что dx8 держит нужно — под вмварей
>(для тестов запускал) оно именно такое в лог и кидает, как включил тестовую
>поддержку ускорения в варе всё запахало.

хм. ?
У меня на WMware пишет: «Can’t create D3D device».
По коду HGE видно, что создание окна идет до инициализации DirectX. Т.е. валится в самом начале. Еще до DirectX.

Ещё раз проверил по варей, про Can’t create D3D device не слова.
Возможно разные версии вари.

ret
>Единственная идея — конфликт с другой игрой, которая использует HGE.
>я смог прекрасно запустить 4 примера с хге причем 2 из них были одинаковыми

Скачал с http://www.relishgames.com игру 15-шки. Запустил два раза. Во втором инстансе нет фона. Первый убиваешь — во втором фон появляется. Тоже самое когда запускаешь 15-шки и мою игру.
Известная проблема?

zxmd
>Ещё раз проверил по варей, про Can’t create D3D device не слова.
>Возможно разные версии вари.

На какой версии WMware проверялось? А операционка какая?

Хост — Vista,
Госевая — XP SP2
Версия вари — 6.0.0 — Билд 45731

Kind
запускал игру 15-шки в 3 копиях одновременно. там нет не коких проблем. все работает отлично. какое у тебя железо и софт?

>запускал игру 15-шки в 3 копиях одновременно. там нет не коких проблем. все
>работает отлично. какое у тебя железо и софт?

видюха Matrox Millennium G550, 32 метра. Думаю, что банально памяти не хватает.

Процессор 2.8GHz, оперативка 2 гига.

Как мне помнится матрас вообще достаточно проблемная в плане 3Д карточка.

экий раритет этот твой Matrox (не бось музей ограбил покайся ))) попробуй на других видеокартах если все будет ок ну тогда сам понимаешь )) (кстати а что там с логом от клиента. у него какое жилезо)

ret
>экий раритет этот твой Matrox (не бось музей ограбил покайся ))) попробуй на
>других видеокартах если все будет ок ну тогда сам понимаешь )) (кстати а что
>там с логом от клиента. у него какое жилезо)

Да, раритет. На других видюхах нормально. Воспрос в репрезентативности выборки 🙂
Клиент молчит.

Kind
если клиент все же заговорит то хотелось бы узнать что у него за железо. очень интересно.

Сообщение типа: «Can’t create D3D device» возникло на одном из компов, где тестили игру. Там был Директх9.0, винда 2000, много мозгов, но видяха Riva TNT 2.

О сообщение: «Can’t create window» не слышал.

Windows 10 Recovery drive error — Can’t create a recovery drive on this PC

• This is a laptop, nothing plugged in.
• Was an upgrade from Windows 8.1
• There is no recovery partition just a vanilla system boot drive
• I get the same failure on my Windows 10 desktop
• sfc/scannow has no errors.
• All drivers are up to date
• Nothing obvious in error logs
• Checked other posts, no solutions that seem obvious .

Thank you for any help or questions.

Replies (9) 

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.

• Do you have enough space in your external drive or disk?
• Did you make any changes to the computer prior to this issue?
• Have you created a recovery media previously on the computer?

As per the issue description, it seems like you are unable to create a system image recovery driver using a USB drive on the computer as it prompts an error message “We cannot create a recovery drive on this PC. Some required files are missing.

I would suggest you to follow the below steps and try to create a recovery drive and check if it helps.

From the taskbar, search for Create a recovery drive and then select it. You might be asked to enter an admin password or confirm your choice.

When the tool opens, make sure Back up system files to the recovery drive is selected and then select Next.

Connect a USB drive to your PC, select it, and then select Next > Create. A lot of files need to be copied to the recovery drive, so this might take a while.

When it’s done, you might see a Delete the recovery partition from your PC link on the final screen. If you want to free up drive space on your PC, select the link and then select Delete. If not, select Finish.

You can also use Windows 10 media creation tool to troubleshoot problems when your PC can’t start.

Kindly let us know if you need any further assistance with Windows. We are glad to assist you.

3 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Yeah I cannot do what you are asking based on what the error message says. Regardless of whether or not I try and backup system files or not it just ends in an error as shown on the screenshot.

I don’t have an issue with the computer right now not booting but wanted to create a recovery drive just in case I do.

• I have never created recovery media on this computer before or my laptop that has the same issue.
• Yes the USB stick has plenty of room and I selected not to backup system files anyways but again it fails before you even get to pick the USB stick or drove to use.
• This is just an upgrade from windows 8.1 to Windows 10, nothing more.

The only thing I can think of is that I migrated my system drive to an SSD. Is there a possibility that the migration did not copy some system files that Windows 10 relies on?

3 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

OK I think it’s related to this

Happy Christmas/Holidays to me 🙂

4 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Try the below methods and check.

Method 1: Disable Antivirus software

Let’s disable the Antivirus software temporarily on your computer and check if it helps.

Note: Antivirus software can help protect the computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do have to temporarily disable it to install other software, you should re-enable it as soon as you’re done. If you are connected to the Internet or a network during the time the antivirus software is disabled, your computer is vulnerable to attacks.

After disabling the Antivirus software temporarily on your computer, try creating recovery drive and check.

If the issue still persist, perform the below steps.

Method 2:

I would suggest you to run the Deployment Image Servicing and Management (DISM) tool and then check for the issue.

1. Open an elevated command prompt. Press Win Key + X, click Command Prompt (Admin).

2. Type the following command, and then press Enter. It may take several minutes for the command operation to be completed.
dism.exe /online /cleanup-image /scanhealth

3. After you get message “The operation completed successfully” type second command and press enter. It will take some time to finish.
dism.exe /online /cleanup-image /restorehealth

Hope this helps. Please do let us know if you need any further assistance.

11 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Yeah dsim did not work.

worked for me and now I am able to do backups

Thanks for all your help

8 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

I inserted a new USB drive into my laptop, started drive recovery and after a while it found the drive. However, on proceeding with the process I was then getting the error message “We can’t create a recovery drive on this PC”.

The steps I took to resolved this were:

1. Create a new partition on the USB drive.
2. Reformat the USB drive as NTFS
3. Make it bootable
4. Re-run the Windows 10 Create Recovery Drive utility

I am not sure that steps 2 & 3 are required as the utility will reformat the drive anyway but I haven’t tested this process omitting them.

Detailed instructions are as follows (thanks to www.indestructables.com for pointing me in the right direction here)

1. Insert your USB flash drive to your running computer. As the first step, we need to run Command Prompt as administrator. To do this, we need to find cmd by typing ‘cmd’ in the search box on Windows Start Menu. After search result for ‘cmd’ appears, right click on it and select «Run as administrator».
2. Type ‘diskpart’ on Command Prompt (without quotes) and hit Enter. Wait for a while until the DISKPART program run.
3. Type ‘list disk’ to view active disks on your computer and hit Enter. There would be seen that the active disks shown as Disk 0 for hard drive and Disk 1 for your USB flashdrive with its total capacity.
4. Type ‘select disk 1’ to determine that disk 1 would be processed in the next step then hit Enter.
5. Type ‘clean’ and hit Enter to remove all of data in the drive.
6. Type ‘create partition primary’ and hit Enter. Creating a primary partition and further recognized by Windows as ‘partition 1’.
7. Type ‘select partition 1’ an hit Enter. Choosing the ‘partition 1’ for setting up it as an active partition.
8. Type ‘active’ and hit Enter. Activating current partition.
9. Type ‘format fs=ntfs quick’ and hit Enter. Formatting current partition as NTFS file system quickly.
10. Type ‘exit’ and hit Enter. Leaving DISKPART program but don’t close the Command Prompt.
11. Type ‘ bootsect /nt60 d: ‘ and hit Enter. Creating boot sector on D: drive (USB flash drive)

Visual Studio 2010 “Cannot create window” error

When I launch Visual Studio 2010 Ultimate, I get the error «Cannot create window». Do you know of any solutions?

8 Answers 8

In my case, it was installing IBM Client Access v6.1 service pack SI37891. When it installed the .NET 4 data provider it broke the XML file.

The file in question can be found here: C:\Windows\Microsoft.NET\Framework\v4.0.30319\Config\machine.config

An additional data provider was installed and a spurious XML close tag was added incorrectly:

if you install and remove netframework 4.5 maybe it happens, reinstall the netframework 4.5

Rename msvcm100.dll to msvcm100.dll.old in c:\windows\system32

Run Visual Studio 2010 repair and msvcm100.dll should get recreated.

The same thing happened to me today for the first time while using VS2010 premium on Windows 7. The only thing different since the last time I used it (16hrs ago) was Windows Update which the System Restore utility says only affected an unrelated local app on my machine, Grooveshark.

Anyway, I restored to the point created immediately before the update, and VS2010 doesn’t complain about not being able to «Create Window» anymore. don’t think this was related to a recent Resharper 5 install.

Hope this helps!

I found that my machine.config file was not editable. I couldn’t even open it to look at it. I’m not sure why. I ended up uninstalling .NET framework 4.5 and re-installing .NET framework 4.0. I was also having trouble with Visual Studio 2012. I’m re-installing that now to see if that works. For the record, I have IBM System i Access for Windows installed on my machine. That may have caused the problem to start with.

I had this issue when attempting to start up SQL Server Management Studio 2012 . Cleaning out the following folders fixed it:

• %SYSTEMDRIVE%\Users\ \AppData\Local\Microsoft\SQL Server Management Studio\
• %SYSTEMDRIVE%\Users\ \AppData\Roaming\Microsoft\SQL Server Management Studio\
• C:\Users\ \AppData\Local\Temp\
• %SYSTEMDRIVE%\Windows\Temp\

Can’t create new folder in windows 10

When right clicking on the desktop or inside a folder the option to create a new folder does not appear, also, when clicking on the «new folder» button on the file explorer or pressing «ctrl + shift + n» does nothing.

I’ve already tried both methods stated in the question «Windows 10 Can’t create a new folder in File Explorer and Can’t right click on desktop»and it had no results.

Please try these methods and see if they help you:

Method 1: Run System File Checker (SFC) scan:

1. Search for ‘command prompt’ using Cortana or Windows Search.

2. From results, right click on Command Prompt and select Run as administrator.

3. Type sfc /scannow command and press Enter key.

4. Let the command complete and then reboot the machine.

Method 2: Reset File Explorer (explorer.exe) process:

1. Press Windows Key + R and type SYSDM.CPL in Run. Click OK or press Enter key.

2. In System Properties window, switch to Advanced tab, click Settings under Performance.

3. Next, in Performance Options, under Processor scheduling, make sure that Adjust for best performance of: is set to Programs.

4. Then in the same window, under Virtual memory, click Settings button.

5. On Virtual Memory page, make sure Automatically manage paging file sizes for all drives option is checked. Click OK, then Apply, OK on rest of windows.

6. Reboot the machine and see if issue is resolved now.

Method 3: Perform clean boot:

Method 4: Perform repair upgrade:

If above methods didn’t helped, try performing repair upgrade using this guide:

Let us know if this helps!

Microsoft MVP (Windows IT Pro), since 2014 · Windows Insider MVP · Windows Help (www.kapilarya.com)

18 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.