Description of Windows Mobile Device Center

This article describes the new application that replaces ActiveSync in Windows Vista.

Applies to: В Windows
Original KB number: В 931937

The content in this article is for Windows Mobile Device Center which is no longer supported. The corresponding downloads have been removed from the Microsoft Download Center. Here are some additional references for Windows 10 environments.

To access your phone on your PCs, you can use Your Phone application on your system. For more information review Your Phone app help & learning — Microsoft Support and Your Phone updates — Windows Insider Program | Microsoft Docs.

To learn more about mobile device management on Windows 10 review Mobile device management — Windows Client Management | Microsoft Docs.

For more information on configuring Windows 10 mobile devices review Configure Windows 10 Mobile devices — Configure Windows | Microsoft Docs.

Introduction

Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista.

Windows Mobile Device Center offers device management and data synchronization between a Windows Mobile-based device and a computer.

For Windows XP or earlier operating systems, you must use Microsoft ActiveSync.

More information

Download and install Windows Mobile Device Center 6.1 if you run Windows Vista on your computer and you want to sync content between your mobile phone and your computer. Windows Mobile Device Center is compatible only with Windows Vista.

If you run Windows XP or an earlier version of Windows, you have to download Microsoft ActiveSync.

You can use Windows Mobile Device Center 6.1 only with phones that run Windows Mobile 2003 or a later version. ActiveSync and Windows Mobile Device Center do not work with Windows Embedded CE 4.2 or 5.0, Pocket PC 2002, or Smartphone 2002 devices.

To determine which Windows Mobile operating system you’re using if your phone doesn’t have a touch screen, click Start, click Settings, and then click About.

If your phone has a touch screen, tap Start, tap the System tab, and then tap About. To sync content to any of these devices, you must use a USB or serial cable, your computer’s Internet connection, and File Explorer.

Windows Mobile Device Center includes the following features:

Windows Mobile Device Center has a new, simplified partnership wizard and has improved partnership management.

The photo management feature helps you detect new photos on a Windows Mobile-based device. Then, this feature helps you tag the photos and import the photos to the Windows Vista Photo Gallery.

You can use Microsoft Windows Media Player to synchronize music files and to shuffle music files on a Windows Mobile-based device.

A new device browsing experience lets you quickly browse files and folders. Additionally, you can open documents that are on a Windows Mobile-based device directly from a computer.

You must use Microsoft Outlook 2002, Outlook 2003, or Office Outlook 2007 to sync your email, contacts, tasks, and notes from your computer.

Enhanced user interface

Windows Mobile Device Center has a simple user interface that helps you quickly access important tasks and configure a Windows Mobile-based device.

Frequently asked questions

Q1: How do I start Windows Mobile Device Manager?

A1: First, make sure that your device is connected to the computer. A splash screen will be displayed when Windows Mobile Device Center detects your phone and starts. You must use a USB cable to connect your phone to your computer the first time that you use Windows Mobile Device Center to sync.

Q2: Can I install Windows Mobile Device Manager on Windows XP?

A2: No, you have to use ActiveSync with Windows XP or earlier Windows operating systems.

Q3: How do I sync my Windows Mobile phone with Windows Device Manager on Windows Vista?

A3: Follow these steps to set your phone’s sync settings your phone with Windows Vista:

1. Plug your device into your computer by using the USB cable or cradle. The Windows Mobile Device Center Home screen appears on your computer.
2. On your computer, click Mobile Device Settings.
3. Click Change content sync settings.
4. Select the check box next to each information type that you want to synchronize, and then click Next.
5. To synchronize with an Exchange Server, enter server information that was provided by a network administrator, and then click Next. Otherwise, click Skip.
6. Enter the Device name, and then clear the check box if you do not want a shortcut for WMDC created on your desktop.

Q4: Does Windows Mobile Device Manager work with phones that don’t run Windows Mobile?

Device will not connect

The driver installation may not have completed successfully. If you think this may be the case, follow these steps:

1. Keep your Mobile device connected to the computer.
2. From the desktop, click Start, and then type devmgmt.msc in the Search programs and files box.
3. In the Device Manager window, look under the Network adapters node for Microsoft Windows Mobile Remote Adapter. If this is not present, go to step 5. Otherwise, right-click Microsoft Windows Mobile Remote Adapter, and then select Uninstall.
4. Look under the Mobile Devices node for Microsoft USB Sync. If this is not present, go to step 6. Otherwise, right-click Microsoft USB Sync, and select Uninstall.
5. Disconnect and then reconnect your device. Your device driver will be reinstalled, and Windows Mobile Device Center will be launched.For more information about connectivity-related problems, see the ActiveSync USB connection troubleshooting guide.

Device is disconnected when syncing large files

If you have problems syncing music, pictures, or other large files in which the connection suddenly closes, there may be an issue with a serial driver that is installed on the device. Unless you are using a VPN server or a firewall that is blocking your large files from synchronization, you may try switching your device into RNDIS mode to fix your large file sync problem. If your device has a USB to PC option, you might use this workaround:

On the device, go to Settings and then Connections. Look for a USB to PC option.

To enable RNDIS USB, select the Enable advanced network functionality check box in the USB to PC options, and then tap OK.

If this option is already selected, do not clear this selection or this workaround will not work.

Warm-boot the device. To do this, hold down the power button and then press the reset button, or remove the battery.

Turn on the device.

When the device is restarted, dock the device and try again.

RNDIS takes a little while to connect. Please be patient and wait for the device to connect.

If, after you follow the previous steps, you cannot connect at all, just switch back to serial USB to sync.

Check in windows mobile

Внимание! Все вопросы по программам, отсутствующим в этом разделе, задавайте в теме Скорая помощь новичкам.

В ЭТОМ РАЗДЕЛЕ ТОЛЬКО КАТАЛОГ ПРОГРАММ! СОЗДАНИЕ ТЕМ С ВОПРОСАМИ ЗАПРЕЩЕНО! ПОИСК ПРОГРАММ.
Новые темы необходимо создавать только в корневом разделе! В дальнейшем они будут обработаны модераторами.

OBDMobile
Версия: 1.2

Последнее обновление программы в шапке: 8.04.2012

Описание:
OBDMobile is a Application for Windows Mobile designed to be used with a OBD scanner
in order to display information and diagnostics from your vehicles OBD port.

All 1996+ year vehicles are required to have a OBD Port.

A OBD Connector is required for full functionality
This Program has not been tested on desiel vehicles.

This displays items like the following:
(* Estimated values)

MPH/KMH
RPM
MPG/KML*
Fuel Level
G Force*
Engine Load
Coolant
Throttle
Fuel Pressure
IMA Pressure
MAF
Barometric
Timing Advanced/li>
Intake Air Temp
HP*
Torque*

Car Diagnostic such as:
Check Engine Lights
Check Engine Light Codes (1,000 codes)
Reset Check Engine Light
Distance Traveled with CEL
Distance Traveled since CEL cleared
Head Up Display functionality!

NEW IN VERSION 1.2!
Data Logging
Graphs
More GPS Data
Mapping/Routing
And More!

Совместимость: WM 2003, WM 2003 SE, WM 5, WM 6, WM 6.1, WM 6.5, WM 6.5.1

Скачать: OBDMobile.v.1.2.crk_igorca.cab ( 1,27 МБ )

Сообщение отредактировал igorca — 08.04.12, 16:57

Windows Device Portal for Mobile

Starting in Windows 10, Version 1511, additional developer features are available for the mobile device family. These features are available only when Developer mode is enabled on the device.

For info about how to enable Developer mode, see Enable your device for development.

Set up Windows Device Portal on Windows Phone

Turn on device discovery and pairing

To connect to Windows Device Portal (WDP), you must enable Device discovery and Device Portal in your phone’s settings. This lets you pair your phone with a PC or other Windows 10 device. Both devices must be connected to the same subnet of the network by a wired or wireless connection, or they must be connected by USB.

The first time you connect to Device Portal, you are asked for a case-sensitive, 6 character security code. This ensures that you have access to the phone, and keeps you safe from attackers. Press the Pair button on your phone to generate and display the code, then enter the 6 characters into the text box in the browser.

You can choose from 3 ways to connect to Device Portal: USB, local host, and over the local network (including VPN and tethering).

To connect to Device Portal

In your browser, enter the address shown here for the connection type you’re using.

Use this address when the phone is connected to a PC via a USB connection. Both devices must have Windows 10, Version 1511 or later.

Use this address to view Device Portal locally on the phone in Microsoft Edge for Windows 10 Mobile.

Use this address to connect over a local network.

The IP address of the phone is shown in the Device Portal settings on the phone. HTTPS is required for authentication and secure communication. The hostname (editable in Settings > System > About) can also be used to access Device Portal on the local network (for example, http://Phone360), which is useful for devices that may change networks or IP addresses frequently, or need to be shared.

Press the Pair button on your phone to generate and display the required security code

Enter the 6 character security code into the Device Portal password box in your browser.

(Optional) Check the Remember my computer box in your browser to remember this pairing in the future.

Here’s the Device Portal section of the developer settings page on Windows Phone.

If you are using Device Portal in a protected environment, like a test lab, where you trust everyone on your local network, have no personal information on the device, and have unique requirements, you can disable authentication. This enables unencrypted communication, and allows anyone with the IP address of your phone to control it.

Tool Notes

Device Portal pages

Processes

The ability to terminate arbitrary processes is not included in the Windows Mobile Device Portal.

Device Portal on mobile devices provides the standard set of pages. For detailed descriptions, see Windows Device Portal overview.

• App Manager
• App File Explorer (Isolated Storage Explorer)
• Processes
• Performance charts
• Event Tracing for Windows (ETW)
• Performance tracing (WPR)
• Devices
• Networking

WinMobile / Софт для Windows Mobile / Система и утилиты / Microsoft Windows Mobile Device Center v6.1 (WinMobile)

Компания Microsoft представила новую версию инструмента синхронизации мобильных устройств на базе Windows Mobile и ПК, работающих под управление операционной системы Microsoft Windows Vista RC1 и Microsoft Windows 7. Напомним, что в Windows Vista и выше функциональность приложения ActiveSync получило приложение Windows Mobile Device Center.
Новая версия называется Windows Mobile Device Center (Центр устройств Windows Mobile 6.1 для Windows Vista и Microsoft Windows 7). Среди новых возможностей — поддержка устройств, работающих под управлением операционной системы Windows Mobile 2003, в дополнение к поддержке устройств на базе Windows Mobile 5.0.
Microsoft Windows Mobile Device Center Beta работает только на Microsoft Windows Vista RC1 и выше. Windows Mobile Device Center позволяет синхронизировать музыку, картинки, просматривать и управлять контентом, синхронизировать данные из электронной почты, контактов, календаря, а также легко управлять настойками синхронизации.

Windows Mobile Device Center Beta доступен для следующих версий Microsoft Windows Vista RC1 или старше.
— Microsoft® Windows® 7
— Microsoft® Windows® Vista Ultimate (x86 and 64-bit)
— Microsoft® Windows® Vista Professional (x86 and 64-bit)
— Microsoft® Windows® Vista Premium (x86 and 64-bit)
— Microsoft® Windows® Vista Server (x86 and 64-bit)
— Microsoft® Windows® Vista Home (x86 and 64-bit)
— Microsoft® Outlook® XP, and Microsoft® Outlook® 2003 передача сообщений и клиенты сотрудничества
— Microsoft® Office XP
— Microsoft® Office 2003