Check the gateway in linux

Ubuntu Linux Find Out Default Gateway / Route

H ow do I find out default gateway IP address (default router IP assigned) for my Ubuntu Linux systems?

A router is nothing but device that moves data between computer networks. If you have an internet connection at home or office, you may have a router installed by your ISP. Some people have all-in-one router that connects to the Internet and shares internet and other LAN resources via WiFi. Typically, the first router in your home/office is used by computer and mobile devices to access internet access. It is also known as a default gateway as it is your gateway to the internet. Let us see how to find out your Gateway on Ubuntu.

Tutorial details
Difficulty level	Easy
Root privileges	No
Requirements	Ubuntu Linux Terminal app
Est. reading time	3 minutes

Ubuntu Linux Finding Out Default Gateway / Route Table

Use the route command or ip command to get default routing table (Gateway) for Ubuntu Linux using the command-line option. Open the terminal and then type the following commands.
route -n
Sample routing table. Always look for UG flag:

Destination for 0.0.0.0 is set to 192.168.2.1 via wlan0 interface i.e. 192.168.2.1 is default gateway. If you just type the route command with the -n switch it show word default instead of 0.0.0.0:
route
Here is what we see:

Possible flags and their meaning in Ubuntu Linux routing table:

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

• U : route is up
• H : target is a host
• G : use gateway
• R : reinstate route for dynamic routing
• D : dynamically installed by daemon or redirect
• M : modified from routing daemon or redirect
• A : installed by addrconf
• C : cache entry
• ! : reject route

The ip command

The following command does the same thing as route is now replaced by the ip tool:
ip route show
My routing table on Ubuntu Linux:

Here is another output showing various interfaces, subnets (CIDR) and their gateways:

Want to see default gateway for the 10.8.0.1, 1.1.1.1 and 192.168.2.17 IP address? Try:
$ ip -c route get 10.8.0.1
$ ip -c route get 1.1.1.1
$ ip -c route get 192.168.2.17

Conclusion

We explained how to obtain default gateway and routing able on Ubuntu Linux using route and ip commands. However, we strongly recommend that you use the ip command instead of the route command. Please man pages for more information by typing the following man command:
$ man ip
$ man route

See also

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

💆♀️ Четыре метода проверки IP-адреса шлюза или маршрутизатора по умолчанию в Linux

Ваш шлюз по умолчанию – это IP-адрес вашего маршрутизатора, о котором вы должны знать.

Обычно он автоматически определяется операционной системой во время установки, в противном случае вам может потребоваться изменить его.

Если ваша система не может проверить связь с самим собой, то, вероятно, это может быть проблема шлюза, и вы должны это исправить.

Это может произойти, если у вас есть несколько сетевых адаптеров или маршрутизаторов в сети.

Шлюз – это маршрутизатор, который действует как точка доступа для передачи сетевых данных из одной сети в другую.

Это можно сделать с помощью следующих четырех команд.

• Команда route: команда route используется для отображения и управления таблицей IP-маршрутизации.
• Команда ip: команда IP аналогична команде ifconfig, которая очень хорошо знакома для назначения статического IP-адреса, маршрута и шлюза по умолчанию и т. д.
• Команда netstat: netstat («статистика сети») – это инструмент командной строки, который отображает информацию, связанную с сетевыми соединениями (как входящими, так и исходящими), такими как таблицы маршрутизации, маскарадные соединения, многоадресное членство и номера сетевых интерфейсов.
• Команда routel: команда routel используется для вывода списка маршрутов с хорошим выходным форматом.

1) Как проверить IP-адрес шлюза или маршрутизатора по умолчанию в Linux с помощью команды route?

Команда route используется для отображения и управления таблицей IP-маршрутизации.

Его основное назначение – установка статических маршрутов к конкретным хостам или сетям через интерфейс после настройки интерфейса.

Когда используются параметры добавления или удаления, маршрут изменяет таблицы маршрутизации.

Без этих параметров в маршруте отображается текущее содержимое таблиц маршрутизации.

2) Как проверить IP-адрес шлюза или маршрутизатора по умолчанию в Linux с помощью команды ip?

Команда IP аналогична ifconfig, которая очень хорошо знакома для назначения статического IP-адреса, маршрута и шлюза по умолчанию и т.д.

Команда ifconfig устарела из-за отсутствия обслуживания в течение многих лет, хотя она по-прежнему доступна в большинстве дистрибутивов Linux.

Команда ifconfig была заменена командой IP, которая является очень мощной и выполняет несколько задач сетевого администрирования одной командой.

Командная утилита IP идет в комплекте с пакетом iproute2.

По умолчанию утилита iproute2 предустановила все основные дистрибутивы Linux.

Если нет, вы можете установить его, указав iproute2 на своем терминале с помощью менеджера пакетов.

3) Как проверить IP-адрес шлюза или маршрутизатора по умолчанию в Linux с помощью команды netstat?

netstat расшифровывается как Network Statistics.

Это инструмент командной строки, который отображает информацию о сетевых подключениях (как входящих, так и исходящих), таких как таблицы маршрутизации, маскарадные соединения, многоадресное членство и имена сетевых интерфейсов.

В нем перечислены все соединения сокетов tcp, udp и сокетов unix.

Он используется для диагностики сетевых проблем в сети и определения объема трафика в сети в качестве измерения производительности.

4) Как проверить IP-адрес шлюза или маршрутизатора по умолчанию в Linux с помощью команды routel?

Он используется для вывода списка маршрутов с красивым форматом вывода.

Эта программа представляет собой набор вспомогательных скриптов, которые вы можете использовать вместо необработанных команд iproute2.

Скрипт Routel выведет список маршрутов в формате, который некоторые могут посчитать более понятным, чем эквивалент списка маршрутов ip.

Скрипт routef не принимает никаких аргументов и просто сбрасывает таблицу маршрутизации. Осторожно! Это означает удаление всех маршрутов, которые сделают вашу сеть непригодной для использования!

Если вы хотите вывести только шлюз по умолчанию, используйте следующий формат.

Источник

How Do I Find Out My Linux Gateway / Router IP Address?

H ow do I find out my gateway IP for a computer or a network device that allows or controls access to another computer or network under Linux / UNIX-like operating systems? How can I find out my Linux Gateway / Router IP address using the CLI?

A gateway is a network point that acts as an entrance to another network. On the Internet, a node or stopping point can be either a gateway node or a host (end-point) node. Both the computers of Internet users and the computers that serve pages to users are host nodes.

Tutorial details
Difficulty level	Easy
Root privileges	Yes
Requirements	ip/route/netstat
Est. reading time	Less than a minute

The computers that control traffic within your company’s network or at your local Internet service provider (ISP) are gateway nodes. In the network for an enterprise, a computer server acting as a gateway node is often also acting as a proxy server and a firewall server. A gateway is often associated with both a router, which knows where to direct a given packet of data that arrives at the gateway, and a switch, which furnishes the actual path in and out of the gateway for a given packet.

Command to find out my Linux Gateway / Router IP address using ip command

The latest version of all Linux distribution based upon systemd. These Linux distros user can use the ip command to find out router IP address.
ip r
ip route

From the above output it is clear that 10.105.28.1 is the default gateway IP address.

How to find default Gateway IP in Linux

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

Find out Gateway / router IP address under Linux / UNIX using route command

You need to use the router command command. This command can manipulate the kernel’s IP routing tables. It can also be used to print gateway/router IP address. Type the following command to see default gateway.
$ route -n
Sample outputs:

192.168.1.1 is gateway IP address for our computer. The flag U indicates that route is up and G indicates that it is gateway. You can print gateway name, enter:
$ route
Sample output:

Second column prints Gateway hostname / IP address. In our example wrt is gateway.

netstat command example to find out gateway/router IP on Unix/FreeBSD/OpenBSD/macOS

Open a terminal and type the following command:
$ netstat -r -n
Sample outputs:

route and netstat command demo

Animated gif 01: Use route and netstat command to find out default gateway/router IP address on Linux

Conclusion

I hope you learned about finding the default gateway IP in the Linux command-line option. Let us know if you need any more help in the comment section below.

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Category	List of Unix and Linux commands
Documentation	help • mandb • man • pinfo
Disk space analyzers	df • duf • ncdu • pydf
File Management	cat • cp • less • mkdir • more • tree
Firewall	Alpine Awall • CentOS 8 • OpenSUSE • RHEL 8 • Ubuntu 16.04 • Ubuntu 18.04 • Ubuntu 20.04
Linux Desktop Apps	Skype • Spotify • VLC 3
Modern utilities	bat • exa
Network Utilities	NetHogs • dig • host • ip • nmap
OpenVPN	CentOS 7 • CentOS 8 • Debian 10 • Debian 8/9 • Ubuntu 18.04 • Ubuntu 20.04
Package Manager	apk • apt
Processes Management	bg • chroot • cron • disown • fg • glances • gtop • jobs • killall • kill • pidof • pstree • pwdx • time • vtop
Searching	ag • grep • whereis • which
Shell builtins	compgen • echo • printf
Text processing	cut • rev
User Information	groups • id • lastcomm • last • lid/libuser-lid • logname • members • users • whoami • who • w
WireGuard VPN	Alpine • CentOS 8 • Debian 10 • Firewall • Ubuntu 20.04

Comments on this entry are closed.

The route command you mentioned helps solve my problem. Thanks!

Thank you very much for the information……….

an add , if allowed :
the command “netstat -r” could also reached the same result.

in our college we have linux proxy server for internet, troughe is a bsnl DSL router. router ip is chenged by our administrator so, i just want to know router ip from my pc which have windows xp for direct internet acsses, can u tell me what i have to do for this? plzzzzzzzzzzz help me.

there is a way, use a software called colasoft capsa on your computer. It will give all the IP address in use, now try each IP address you think may be a gateway and you will get to the internet. But I just want to know which BSNL router you are using?

There is one more issue that if you are going through linux proxy server, it is difficult to go through it, remember it is difficult not impossible. Just you have to go 1 step ahead your administrator

i’m working in corporate office … i want to know ip address of router even some of them told that default gateway is the ip address i telnet it but not connecting … how i have to found the ip address . send to my mail if u have the idea

Let me clear you can not telnet each device on the network. So try ping command first
syntex is
ping xxx.xxx.xxx.xxx

i tried that but it does not have anything except a (*) in the gateway column. what should I do?

How to find gateways of multiple intrefaces? I have two interfaces, one is default, and it’s OK, but I need gateway of second interface …

For some reason, when I type the router’s IP address in a Firefox address bar, it doesn’t show up… any tips for solving this annoyance?

Hello Vivek,
Is there a way to get version, model number and other pertinent info of Linksys router via linux? I have an ancient router with the relevant tags scratched up.
Thanks!

Just open the router settings, you will get the model number and versions their

thank you very much .Information is very needful.

Access Denied Help Me PLzzzzzZZZZzzzzz

Add “sudo” before it.

sudo cant work if user is not added in sudoers file

Thanks for the information ! Very helpful!

thank u so much… it was very helpful

THX man. learning linux now and i like it. it is so complex, so many things to learn 😀

Hi. I ve seen a couple of very helpful replies here so I was hoping to get an answer to my problem here.

I am located in Japan and got my self an internet contract. It looks like a DSL router. Though I am not sure what I actually ordered. The usual way to establish connection is only by a CD on Windows. I am pretty sure I can somehow make that darn thing work with Ubuntu as well, I just dont know how.

If editing a DSL connection to the Network Manager it still doesnt work. But I am not very skilled with that. There I tiped in my User data and thats it. I dont know wether of how to fill out the PPPoE or do it automatically. I also wouldnt know the addresse to fill in here.

Then I also tried some sudo pppoe config command but that wouldnt help me either. Afterwards I would always have to get to the etc/network/interfaces file to set everything back so that it wouldnt take 10 times longer to start the laptop cause of the wrong network configurations.

I thought to myself it could be done by accessing the router with an Windows Laptop, but I dont know my neighbours too well to borrow one. However do you think that might be a solution as well ?

Thanks for your comments in advance

if you plug the router in and turn it on, plug a network cable between your linux computer, it should connect just by using DHCP… The CDs ISPs give out have bloatware like anti-virus, online backup storage (never enough!), dumb wireless managers etc. A network is a netowrk, and there is no need for all the software on the CD…

Источник