checkra1n

Jailbreak for iPhone 5s through iPhone X, iOS 12.0 and up

Latest Release

checkra1n 0.12.2 beta

You can’t download this on your iOS device. Come back on a computer to get started with checkra1n.

We couldn’t determine your OS. See downloads »

This release is a beta preview and as such should not be installed on a primary devices

What’s new

Highlighted changes

• Enables USB on AppleTV 4k during normal system operation

Bug fixes

• Fixes A10 and A10X devices crashing when trying to jailbreak on iOS 14.3 or higher
• Fixes an issue where some LaunchDaemons were loaded on platforms where they should not have been

Notes

• A11 devices on iOS 14.0 and above require removing the passcode and enabling “Skip A11 BPR check” in the options. This is not recommended, but it’s there.

Known issues

• checkra1n does not currently work on Apple Silicon Macs
• A7 devices will currently not work with the Linux version
• The exploit may not work as reliably on some devices, such as the Raspberry Pi Zero and Raspberry Pi 3
• Linux GUI build when using CLI mode doesn’t support auto assertion of DFU mode on advanced Apple TV 4k breakout boards
• bridgeOS:
  • If you disconnect the cable, then as soon as macOS boots it’ll take over the USB connection and disallow communication with the T2
• Some users have reported checkra1n crashing when Chinese is set as the only system language. It is unknown whether any other language is affected.

Unsupported platforms

This beta is only available for macOS and Linux. Work is ongoing to support Windows, which will be added in a later release.

Package managers

At the moment, checkra1n only supports installing Cydia. Support for other package managers, including Zebra and Installer is coming soon and is expected within the coming weeks.

Frequently Asked Questions

Q: What is checkra1n?
A: checkra1n is a community project to provide a high-quality semi-tethered jailbreak to all, based on the ‘checkm8’ bootrom exploit.

Q: How does it work?
A: Magic hax.

Q: Why was the beta release delayed?
A: We didn’t want the release quality to end up like iOS 13.2, you deserve better.

Q: wen eta?
A: bruh we’re past that.

Q: How do I use it?
A: Open the checkra1n app, and follow the instructions to put your device into DFU mode. Hax happens auto-magically from that point and the device will boot into jailbroken mode. If you reboot the device without checkra1n, it will revert to stock iOS, and you will not be able to use any 3rd party software installed until you enter DFU and checkra1n the device again.

Q: Ugh, I don’t like GUI?
A: Ok, you can use «./checkra1n.app/Contents/MacOS/checkra1n -c» from the console, or download a Linux CLI build.

Q: Is it safe to jailbreak? Can it harm my device / wipe my data?
A: We believe jailbreaking is safe and take precautions to avoid data loss. However, as with any software, bugs can happen and *no warranty is provided*. We do recommend you backup your device before running checkra1n.

Q: I have a problem or issue to report after jailbreaking.
A: Many problems and bootloops can be caused by buggy or incompatible tweaks. Remember many tweaks never saw iOS 13 in the pre-checkra1n era. If you suspect a recently installed tweak, you may attempt to enter no-substrate mode by holding vol-up during boot (starting with Apple logo until boot completes). If the issue goes away, a bad tweak is very likely the culprit, and you should contact the tweak developers.

Q: I have a problem or issue to report and I don’t think it’s related to a bad tweak.
A: Please check here and follow the bug report template.

Q: I lost my passcode. Can checkra1n decrypt my data or get access to a locked device?
A: No.

Q: Can I ssh into my device?
A: Yes! An SSH server is deployed on port 44 on localhost only. You can expose it on your local machine using iproxy via USB.

Q: I love the project! Can I donate?
A: Thanks, we love it too! The project does not currently take any donations. If anyone asks for donations, it’s a scam.

Q: Where are the sources? I want to write a dark-mode theme and publish the jailbreak as my own.
A: checkra1n is released in binary form only at this stage. We plan to open-source later in 2020. We will release the full checkra1n source once we have a Windows GUI version. We had hoped to get there in 2020, but we didn’t manage to. But PongoOS, the kernel patchfinder and the SEP exploit are already open source on GitHub.

Q: When is Windows support coming?
A: Soonв„ў. We need to write a kernel driver to support Windows which will take time. Rest assured however, we are working hard on it.

Checkra1n для Windows: как сделать джейлбрейк iOS 13 – 14.3 через ПК?

Если вы следите за новостями в области джейлбрейка, то знаете, что инструмент checkra1n не установить без Mac или компьютера с Linux. Технически это правда, но вы можете использовать инструмент bootra1n, чтобы установить checkra1n с помощью ПК с Windows.

Да, процесс установки будет сложнее, чем на Mac или Linux, но способ с bootra1n подойдёт тем, у кого есть только компьютер с Windows. Ниже мы расскажем обо всём подробнее.

Что нужно знать

Напомним, что официально джейлбрейк checkra1n всё ещё поддерживает только macOS и Linux. По сути инструмент bootra1n использует небольшую часть Linux на вашем ПК для установки checkra1n.

В процессе вам нужно записать образ диска bootra1n на пустую USB-флэшку или CD-диск, а затем запустить его на компьютере с Windows. Иными словами, вы запустите версию Linux со съёмного накопителя, а не Windows с основного жёсткого диска.

Что вам понадобится

• Пустая USB-флэшка или CD-диск с минимум 512 Мб памяти.
• 64-битный или 32-битный ПК с Windows с процессором AMD или Intel.
• iPhone или iPad, совместимый с джейлбрейком checkra1n (A7-A11).
• Кабель USB-A/Lightning с сертификацией MFi (USB-C/Lightning не подходит).
• Инструмент bootra1n (64-бит или 32-бит) или checkn1x.
• Инструмент Rufus или balenaetcher.

Все инструменты можно скачать отсюда или checkn1x отсюда, и лучше сделать это заранее. Файлы постоянно обновляются, так что прямые ссылки мы указать не можем. Чем новее версия инструмента у вас будет – тем лучше.

Как установить джейлбрейк checkra1n через ПК с Windows

1) Когда скачаете все необходимые инструменты из репозитория GitHub, подключите к компьютеру свой iPhone/iPad и USB-флэшку (или вставьте CD-диск в дисковод).

2) Нажмите на иконку инструмента Rufus правой кнопкой мыши и выберите Запуск от имени администратора. Подтвердите запуск программы:

3) Перед первым запуском программы Rufus вам может быть предложено скачать дополнительные файлы. Соглашайтесь. Когда программа откроется, она автоматически обнаружит съёмный носитель. Нажмите кнопку Select и выберите скачанный ранее файл bootra1n.ISO или checkn1x.ISO.

4) Когда выберите файл .ISO, появится новое окошко. Выберите Write in ISO image mode (recommended) и нажмите OK:

5) Адрес bootra1n.ISO или checkn1x.ISO появится в окне Rufus. Больше ничего не трогайте и просто нажмите кнопку Start:

6) Rufus предупредит вас, что носитель будет отформатирован, и на него будет записан файл .ISO. Нажмите OK:

7) Когда Rufus завершит процесс записи ISO, можете на время прощаться с Windows. Перезагрузите свой компьютер и войдите в режим BIOS (способы различаются для разных моделей, так что найдите инструкцию для своей с помощью Google). Чаще всего это делается зажатием клавиши F2 или Delete во время загрузки.

8) Когда активируется режим BIOS, найдите опцию Запуска (Boot) и убедитесь, что в первой строке стоит только что записанный USB-накопитель:

9) Сохраните изменения и перезагрузите компьютер. Когда он запустится, вы увидите не Windows, а другой интерфейс. Нажмите клавишу Enter, чтобы продолжить:

10) Дальше появится интерфейс, похожий на командную строку (Terminal). Когда он завершит загрузку, то появится запрос логина и пароля. Введите следующее:

• логин: anon
• пароль: voidlinux

11) Теперь нужно вводить команды после символа “$”. Введите следующее:

12) Загрузится программа checkra1n, и выглядеть это будет так:

13) С помощью клавиш со стрелками выберите опцию Start, а затем нажмите Enter.

14) Дальше вам нужно будет ввести свой iPhone или iPad в режим DFU. Выберите опцию Next и нажмите Enter.

15) Следуйте инструкциям на экране, чтобы активировать режим DFU. Выберите опцию Start и нажмите Enter, а затем выполните действия для своего устройства:

16) Когда вы войдёте в режим DFU, bootra1n начнёт процесс установки джейлбрейка:

17) На вашем устройстве появится экран загрузки checkra1n. Не отключайте его от компьютера до завершения процесса.

18 Когда процесс завершится, вы можете перезагрузить компьютер и с помощью режима BIOS выбрать жёсткий диск с Windows для запуска.

Примечание: Чтобы перезагрузить компьютер с экрана bootra1n, используйте следующую команду:

19) На вашем устройстве с iOS должно появиться приложение checkra1n. Откройте его.

20) Выберите секцию Cydia и нажмите Install Cydia.

21) Приложение установит менеджер твиков Cydia:

22) Запустите Cydia и обновите источники.

Вместо Cydia вы также можете установить и более современный менеджер твиков Sileo.
Поздравляем, вы установили джейлбрейк без Mac и компьютера с Linux!

Вывод

Да, процесс дольше и сложнее, чем с использованием Mac или Linux, но для многих это единственный способ установить джейлбрейк checkra1n. В будущем должна появиться официальная поддержка checkra1n на Windows, но когда именно – неизвестно.

После завершения процесса, не забудьте вернуться в меню BIOS и переключиться на Windows. В ином случае, компьютер продолжит загружаться с накопителя, а при его отключении выдаст ошибку.

Checkra1n Jailbreak for all iOS versions

Checkra1n is a semi-tethered jailbreak based on the ‘checkm8’ bootrom exploit. This unpatchable jailbreak exists on A7-A11 devices.

We have listed Checkra1n jailbreak support according to iOS versions as follows.

Checkra1n jailbreak for iOS 14 – iOS 14.5

Checkra1n is the only available semi tethered jailbreak tool for iOS 14.4, iOS 14.4.1, iOS 14.4.2, iOS 14.5 versions. If there are available semi untethered jailbreak tools up to iOS 14.3, you cannot use them to jailbreak iOS 14.4 – iOS 14.5 versions. Also, it cannot use Checkra1n jailbreak for latest A12 – A14 device users and they need to use Zeon as alternative solutions for iOS 14.4 – iOS 14.5 .

Checkra1n is also compatible with iOS 14 – iOS 14.3 too. Also, A9 – A11 devices and A11 support is limited with Checkra1n. Both Mac & Linux support available to download Checkra1n. Windows users need to use alternative Windows methods.

Step Guide

Step 01 – Tap the above button to download the Checkra1n dmg file to your Mac.

Step 02 – Drag the downloaded Checkra1n file into the Applications.

Step 03 – Connect the Mac and the device. Open Mac’s application folder > checkra1n > Contents > MacOS > Checkra1n_gui Terminal file. Now your device will be recognized by Checkra1n.

Step 04 – Click on the Start now. Then it will ask you to enter DFU Mode. Click on Next and it will guide you to enter the DFU Mode.

Step 05 – Again click the Start button and Turn the device into DFU mode by pressing the side button and Volume down button as the instructions right of the window. (Check the video guide for this step)

Step 06 – Once entered DFU mode successfully, it will start the jailbreak process. Wait until complete it and close the checkra1n application after completing the jailbreak process. Then the Checkra1n app will be added on your device homescreen.

Step 07 – Open the Checkra1n application from your device homescreen. Click on Cydia > Install Cydia> Done. Now Cydia on your device.

Note – iOS 14 – iOS 14.5 running A11 devices can not jailbreak with a passcode enabled. Remove it before jailbreaking. You must check the “Skip A11 BPR check” box in the options view and boot the device without a passcode. This is not recommended hence this is effective for the device security, but still you can try this method.

Compatibility :

Following devices are only supported to jailbreak iOS 14 to iOS 14.5 with Checkrain.

iPhone 6S, iPhone 6S Plus, iPhone SE (1st), iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X,

iPad 5th, iPad 6th, iPad 7th, iPad Mini 4, iPad Air 2, iPad Pro 1st, iPad Pro 2nd, iPod Touch 7

Rest of other devices running iOS 14 to iOS 14.3 users can follow the Unc0ver jailbreak for iOS 14 to iOS 14.3 or Taurine jailbreak for iOS 14 – iOS 14.3. Zeon is the best Checkra1n alternative to install iOS 14.4 to iOS 14.4.2 jailbreak apps including iOS 14.5 beta.

Zeon for iOS 14.4 – iOS 14.5

Zeon is the best Checkra1n alternative method for iOS 14.4, iOS 14.4.1, iOS 14.4.2 and iOS 14.5 beta version to install jailbreak apps. Zeon is compatible with iOS 14 onwards.

You do not need a Windows, mac or Linux computer to install Zeon Jailbreak repo extractor. Zeon has very easy repo extracting method to install jailbreak app. Zeon works with all latest iPhone and iPad models which you cannot use with Checkra1n jailbreak.

It has a very easy installation process. Just tap the above Zeon Download button from your device Safari browser to install it. Then you can install any number of jailbreak apps to your iOS 14 to iOS 14.5 devices. Even Zeon is compatible with iOS 14 and higher versions, it is the very best Checkrain alternative for iOS 14.4, iOS 14.4.1, iOS 14.4.2 and iOS 14.5 users, because of not having a proper jailbreak tool for iOS 14.4 to iOS 14.5.

If you are an iOS 14 or higher user, visit the following pages to know more jailbreak solutions.

Checkra1n jailbreak for iOS iOS 13 – iOS 13.7

Checkra1n jailbreak is compatible to jailbreak iOS 13 to iOS 13.7 versions too. Checkra1n Beta 0.11.0 version has been upgraded to jailbreak up to iOS 13.7 running A7 to A11 devices as permanent jailbreak.

You can follow the same Checkra1n MAC guide for Mac users, Checkra1n Linux guide for Linux users and Checkra1n Windows guide for Windows users.

However, Unc0ver jailbreak (bookmark) and Odyssey Jailbreak (bookmark) are the best semi untethered tools for all the iOS 13 to iOS 13.7 devices. If you are looking for an online checkrain alternative method, Hexxa Plus is the best solution. Because, it has some revoke issues to use Unc0ver and Odyssey tools as Online.

Hexxa Plus for iOS 13 – iOS 13.7

Hexxa Plus is the most popular Online iOS 13 to iOS 13.7 Jailbreak alternative for Checkrain. Even if you cannot jailbreak iPhone XS, XR, XS max, iPhone 11, 11 pro, 11 pro max devices with Checkra1n, Hexxa Plus is supported for all these device models to install jailbreak apps. Hexxa Plus is an upgraded version of Hexxa.

Hexxa Plus Installation process is so much easier than IPA based checkm8 based Checkrain Jailbreak. You don’t need to use a computer, iTunes or Cydia impactor to install Hexxa Plus. But all system related Jailbreak apps and tweaks are not available for iOS 13.6, iOS 13.6.1 & iOS 13.7 via Hexxa Plus.

Visit the following pages to find more jailbreak solutions.

Checkra1n jailbreak for iOS 12 – iOS 12.5.2

Checkrain is a permanent jailbreak for iOS 12 to iOS 12.5.2 running devices up to iPhone X. Use the following links to get the guide to jailbreak those versions.

But, Checkra1n jailbreak cannot be used to jailbreak iOS 12 to iOS 12.5.2 running A12 and above devices to install Cydia. You can use Checkra1n alternatives for iOS 12 to iOS 12.5.2 versions jailbreak or Hexxa repo extractor as an online jailbreak solution.

Hexxa for iOS 12 to iOS 12.5.2

Hexxa is a jailbreak repo extractor released targeting iOS 12 to iOS 12.5.2 versions. It uses a repo extracting method to install jailbreak apps. Hexxa can be used as the Checkra1n online alternative for iOS 12 to iOS 12.5.2 versions for more jailbreak apps.

Click below pages, If you want to get more jailbreak solutions about iOS 12 to iOS 12.5.2.

Checkra1n Compatibility

Device models : iPhone 5S, iPhone 6 / 6 Plus, iPhone 6S / 6S Plus , iPhone SE, iPhone 7 / 7 Plus, iPhone 8 / 8 Plus, iPhone X, iPad Air, iPad Mini 2, iPad Mini 3, iPad Air 2, iPad Mini 4, iPad Pro (1st gen & 2nd gen), iPad (5th gen, 6th gen & 7th gen), iPod 6th gen & 7th gen,

iOS versions : iOS 14.5, iOS 14.4.2, iOS 14.4.1, iOS 14.4, iOS 14.3, iOS 14.2, iOS 14.1, iOS 14.0.1, iOS 14, iOS 13.7, iOS 13.6.1, iOS 13.6, iOS 13.5.1, iOS 13.5, iOS 13.4.1, iOS 13.4, iOS 13.3.1, iOS 13.3, iOS 13.2.3, iOS 13.2.2, iOS 13.2, iOS 13.1.3, iOS 13.1.2, iOS 13.1.1, iOS 13.1, iOS 13, iOS 12.5.2, iOS 12.5.1, iOS 12.5, iOS 12.4.9, iOS 12.4.8, iOS 12.4.7, iOS 12.4.6, iOS 12.4.5, iOS 12.4.4, iOS 12.4.3, iOS 12.4.2, iOS 12.4.1, iOS 12.4, iOS 12.3.2, iOS 12.3.1, iOS 12.3

Note – iOS 14, iOS 14.0.1, iOS 14.1, iOS 14.2, iOS 14.3, iOS 14.4, iOS 14.4.1, iOS 14.5 fully works with A9/A9X/A10/A10X devices. A11 devices (iPhone X and iPhone 8 / 8 Plus) need to remove the passcode and enable “Skip A11 BPR check” in the options.

Checkra1n Jailbreak for Linux users

It has added Checkra1n Linux support with the latest Checkrain update up to iOS 14.5. You just have to download the correct Linux Checkrain binary according to CLI builds of CPU types as follows. Then run the CLI.

Step Guide

Step 01 – Tap the below links to download the checkra1n Linux jailbreak file according to computer OS.

Step 02 – Launch the downloaded file. Open the terminal window and type the below commands.

chmod +x (drag and drop the checkra1n jailbreak folder on the terminal, enter)

Sudo (drag and drop the checkra1n jailbreak folder on the terminal, enter)

Step 03 – After that, it will ask your computer password (If you have setup), otherwise it will show the checkra1n Linux jailbreak your Linux screen. Click on the Start button to go ahead with the CheckRa1n Jailbreak process. Steps remain the same as above Mac guide.

Ra1nbox – Jailbreak Online using a portable Linux board with checkra1n

Developer Fidelity88 has released on the go solution to CheckRa1n Linux users. This is a portable checkra1n jailbreak solution based on the NanoPi Neo2. With this method checkra1n runs together with the Ra1nbox software on this portable Linux board.

You need the following parts to complete the CheckRa1n jailbreak without a PC on iOS 12.3 – iOS 13.3 running A5-A11 devices including iPhone 5S to iPhone X. It should work with all the checkra1n compatible iOS versions too.

• NanoPi Neo2 Linux board
• Ra1nbox software
• Micro-USB power supply ( Ex: powerbank)

Follow these videos to set up your Ra1nbox.

Checkra1n Jailbreak for Windows users

One of the members of the Checkra1n tool development team, Dany Lisiansky tweeted a screenshot of a working Checkra1n tool on Windows 10. According to the screenshot, @DanyL has tested Checkra1n beta 0.12.2 version with Windows 10. So, we can keep some hope of having a Checkrain Windows version soon.

You are only allowed to do it the other way around (!!)

pure win32 gdi here, all controls are custom drawn to mimic macOS look and behavior (will have to switch to gdi+ for antialiasing tho.. :/) pic.twitter.com/Y5FYj0TUvR

Earlier, iFenixx has informed, the Checkcrain jailbreak Windows tool is coming soon through his twitter account. The most important thing is he has demonstrated it and published a demo video to prove it. So, it will be available Checkrain jailbreak for Windows users soon. Until then Windows users can use Checkra1n alternatives.

Here is the demonstrated video published by iFenixx.

Checkra1n for Windows first demo!!

Alternative for Checkra1n Windows / Linux users

i. 3u Tools – Checkra1n Jailbreak for Windows users

3u Tools is a windows based universal application for restore, Install IPA Files, jailbreak or manage your iOS device. Now 3 u tools provide windows support for Checkra1n Jailbreak, because checkra1n officially is not available for windows.

Therefore, follow the Checkra1n jailbreak with 3uTools on Windows PC to complete the Jailbreak process. It requires a USB flash drive above 1GB storage.

Step Guide

Step 01 – Plug your USB flash drive to Computer. Download the 3UTools from the following button.

Step 02 – Run 3uTools from the computer. Then, go to Flash & JB-Jailbreak, tap Jailbreak & select “Make Checkra1n jailbreak USB flash drive.”

Step 03 – Now you can choose your USB Flash drive from the drop-down menu.

Step 04- Tap on the “start making” button, then tap ‘Yes’ for the popup message, You will get a Jailbreak U disk successful message. Then exit from the 3utools.

Step 05 – Plug your iPhone or iPad to Windows computer. Now Restart the computer. Once done, navigate to Boot Manager and select USB drive from there.

Step 06 – Now you will get the Checkra1n jailbreak interface. Now tap Start > checkra1n options > Allow untested iOS/iPadOS/tvOS versions > OK. Follow onscreen instructions to put your device on DFU mode.

Step 07 – Your device will reboot and, Checkra1n app appears on your iPhone / iPad homescreen. Run the Checkra1n app to complete the Jailbreak process.

ii. Ra1nUSB Jailbreak

Ra1nusb is not a Jailbreak tool. It will help you to create a bootable USB on your Windows or Linux PC. It will boot with a pre-packaged version of macOS to run the checkra1n tool. It is a somewhat complicated method. You should have an 8GB USB drive.

Step Guide

Step 01 – Download Ra1nUSB according to your PC and balenaEtcher to create a bootable USB drive. Use the below links.

Step 02 – Plug your USB drive to thePC. Open Etcher, it will automatically detect your USB. Choose the Ra1nUSB image file that you have downloaded when prompted.

Step 03 – Navigate to your PC BIOS by pressing the F10/F12 or DEL. Disable the following features.

Then enable the Virtualization option and save the changes.

Step 04 – Now let it boot from USB drive. Select the Boot macOS Install from Ra1nUSB option. Again you need to choose Boot Verbose from Ra1nUSB during the process.

Step 05 – You can see the macOS-like installer screen if Ra1nUSB successfully works. Don’t tap on proceed with the installation of macOS. Tap on the Utilities from the top.

Step 06 – Then type “ra1nusb” in the Terminal window > Enter. It should open the Checkra1n jailbreak tool. Now connect your device with PC and you can go ahead with the Checkra1n Jailbreak process. Use the same MAC guide to complete the checkra1n Jailbreak.

iii. Ra1nstorm Jailbreak

Ra1nStorm is a utility pack that allows you to run Checkra1n Jailbreak on Windows and Linux. It is available Ra1nstorm 0.9.2 to run Checkra1n jailbreak on your Windows. Use the following unofficial ra1nstorm (KVM/IOMMU) guide with checkrain jailbreak. Then follow the Checkrain Mac guide to complete the jailbreak process.

Step Guide

Step 01 – Download Rainstorm to your Windows computer using the button below.

Step 02 – Run the downloaded rainstorm file to install MAC.

Step 03 – Now, Windows users can run Checkrain jailbreak using Windows computer.

Step 04 – Continue above Checkra1n jailbreak Mac guide.

iv. Bootra1n Jailbreak

Bootra1n is an alternative for linux+checkra1n on any PC using a USB Flash drive. This method is very similar to the Ra1nUSB method.

Step Guide

Step 01 – Download the bootra1n file.

Step 02 – Then unzip bootra1n file that consists of ISO file.

Step 03 – Write bootra1n to USB with Rufus. (Link) Press SELECT, open the ISO file, and press START to flash it to your USB drive.

Step 04 – Now Reboot your computer to get BIOS settings and select flash drive. Provide the following details to the login prompt.

Log in Name – anon

password – voidlinux

At the $ prompt, enter sudo checkra1n

Step 05 – Then proceed with Checkra1n Jailbreak.

v. piRa1n jailbreak

piRa1n will turn a Raspberry Pi 4 into a Checkra1n dongle and it allows you to jailbreak your device from anywhere without a PC.

Currently piRa1n only works with the Raspberry Pi 4. It is a very easy method, just connect the Raspberry Pi 4 to a power bank, then plug your iPhone or iPad to the Pi & put your iOS device to DFU mode. piRa1n will complete the process.

You will need to have the following components to complete this piRa1n process.

RAM Raspberry Pi 4 (1GB, 2GB, 4GB)
Type-C USB Cable
Lightning cable
5V/3A output Power bank
MicroSD Card ( 8GB or higher)

Step Guide

Step 01 – First set up the Raspbian.

Download the Raspberry Imager software and install Raspbian “A port of Debian with the Raspberry Pi Desktop on your MicroSD Card.

Step 02 – Connect the MicroSD Card in the Raspberry Pi 4 and turn it on, connect and configure the OS with the according to on screen instructions.

Step 03 – Then you need to install piRa1n. Then open the terminal and Copy and paste the following command and enter.

cd /home/pi && git clone https://github.com/raspberryenvoie/piRa1n.git && cd piRa1n && sudo chmod +x install_piRa1n.sh && ./install_piRa1n.sh

Step 04 – Once done, Connect the Raspberry Pi 4 to a power bank. Then connect your iPhone or iPad to the Pi.

Step 05 – Put the device into DFU mode. Now piRa1n starts the Jailbreak process. Once completed the Jailbreak process the Pi will be shut down. Now you can unplug the Pi from the power bank.

Enjoy your CheckRa1n Jailbreak with NO PC using piRa1n!

pira1n is an easy way to create a portable CheckRa1n dongle.

Checkra1n Online Jailbreak

Unfortunately, there are no Checkra1n online Jailbreak methods. But still, you can use Checkra1n alternative methods that can be installed online for latest versions.

Checkra1n is a very complicated Jailbreak method. But you can install Hexxa Plus for iOS 13 versions and Zeon for iOS 14 versions as alternative Checkra1n online jailbreak methods from the following links.

Checkrain Alternatives

Checkra1n is a hardware based semi-tethered jailbreak for all latest iOS versions. But not supported for A12/A13 devices. On the other hand, Checkra1n has advanced methods for Windows users. So, still it needs to use Checkra1n Jailbreak alternatives.

It has the following semi-untethered jailbreak as checkra1n alternatives for iOS 13 – iOS 14.3. If you are iOS14.4 or higher, you can use the above online solutions as Checkra1n alternatives.

Unc0ver Jailbreak to iOS 13 – iOS 14.3

Now Unc0ver Jailbreak added iOS 13 – iOS 14.3 support. It is compatible as semi-untethered Jailbreak for iPhone 11 series (2018) and iPhone XS series (2019). Also, it has added online jailbreak support.

Uncover was the most popular Jailbreak tool since iOS 11. However, it has some issues with Online jailbreak. It is getting revoked issues. Also, it has a JB process using the alt store on Mac & Windows users. Also, it should have an Apple developer account to complete the Jailbreak method for linux users to work with the Cydia Impactor.

Taurine Jailbreak to iOS 14 – iOS 14.3

Taurine is a newly released semi-untethered jailbreak for iOS 14 – iOS 14.3. It is compatible with the latest iPhone 12 & all other device models. Taurine’s default package manager is Sileo and developed by the same Odyssey team. You can sideload Taurine Jailbreak IPA with Altstore or sieloadly.

Odyssey Jailbreak to iOS 13 – iOS 13.7

Odyssey is a semi-untethered jailbreak for iOS 13 – iOS 13.7. It works up with all device models including A12, A13 devices. This is the same Chimera jailbreak which is available for iOS 12 versions. So, It install Sileo instead of Cydia. You can install Odyssey Online or using the IPA sideload method as well as the Altstore method.

Checkra1n for Apple TV

The checkra1n jailbreak has been updated with support for the Apple TV 4 for the very first time. The release was announced on Twitter by @nitoTV. Also, the latest Checkra1n 0.12.2 beta added Apple TV Jailbreak support up to tvOS 14.4.

Currently, only works effectively on the fourth-generation Apple TV. Also, he said Owners would experience issues with DFU Mode if they attempted to use Apple TV 4K. It is available on a temporary site as follows.

Here is another Apple TV update that has been released.

Go for Apple TV Jailbreak page for more details.