Download Software |
---|
FlexGUI 32bit Software: Download Now Version 8.01 (ZIP — 15.4 MB) |
Supported OS: Windows 10 (32 and 64Bit), Windows 8.1 (32 and 64Bit), Windows 7 (32 and 64Bit), Windows XP (32 and 64Bit) |
Critical Note: FlexGUI v8.01 requires target-board firmware v0.800. If unsure about the firmware version on the target board, follow the Firmware Upgrade Instructions below. |
Firmware Upgrade Instructions
Note: The following steps must be taken using a PC running Windows XP.
- Ensure the target board is listed in the Supported Boards table below.
- Using the Windows Control Panel, uninstall any previous versions of FlexGUI.
- Download and install the latest FlexGUI release package (Version 8.01).
- Connect the board to an available COM or USB port on your computer.
- Apply power to the board.
- Launch the software.
- Follow on-screen command firmware update prompts.
- Turn off power to the board.The firmware update is now complete, and the target board is now able to be used with FlexGUI Version 8.00 on a PC running any of the supported operating systems.
- Repeat steps 5 and 6 to use the FlexGUI on the presently connected PC.
Installation Instructions
- Ensure the target board is listed in the Supported Boards table below.
- Using the Windows Control Panel, uninstall any previous versions of FlexGUI.
- Download and install the latest FlexGUI release package (Version 8.01).
- Connect the board to an available COM or USB port on your computer.
- Apply power to the board.
- Launch the software.
Supported Boards
Documentation for your board is available on the product pages accessible through the links in the tables below.
Disclaimer: CRD441X0, CRD4525, CRD44130, CRD44150 require Windows XP.
A/D Converters | ||
---|---|---|
Clock Generation and Jitter Reduction |
---|
Interfaces & Sample Rate Converters |
---|