Fix sound problems in Windows 10

If you’re having audio problems, the following suggestions might help. The tips are listed in order, so start with the first one, see if that helps, and then continue to the next one if it doesn’t.

If multiple audio output devices are available, check that you have the appropriate one selected. Here’s how:

Select the Speakers icon on the taskbar.

Next, select the arrow to open a list of audio devices connected to your computer.

Check that your audio is playing to the audio device you prefer, such as a speaker or headphones.

If this doesn’t help, continue to the next tip.

The audio troubleshooter might be able to fix audio problems automatically.

To run the troubleshooter

In the search box on the taskbar, type audio troubleshooter, select Fix and find problems with playing sound from the results, then select Next.

Select the device you want to troubleshoot and then continue through the troubleshooter.

You can also launch the troubleshooter from audio Settings. Select Start > Settings > System > Sound > Troubleshoot.

If running the troubleshooter doesn’t help, continue to the next tip.

To check for updates

Select Start > Settings > Update & Security > Windows Update > Check for updates.

Do one of the following:

If the status says «You’re up to date, go to the next tip.

If the status says «Updates are available,» select Install now.

Select the updates you want to install, then select Install.

Restart your PC and see if your sound is working properly.

If that didn’t solve your problem, continue to the next tip.

Try these steps

Check your speaker and headphone connections for loose cords or cables. Make sure all cords and cables are plugged in.

If you have multiple 5mm jacks to plug into, especially on a surround sound system, make sure all cords and cables are plugged into the correct jack.

If it’s not clear which jack goes with which cord, consult your hardware manufacturer, or try the most obvious outputs one at a time and see if they work.

Note: Some systems use a green jack for output and pink for mic input and others will be labeled «headphone» or «microphone.»

Make sure the power is turned on and check the volume level.

Make sure the mute setting is not turned on, and try turning up all the volume controls.

Remember some speakers and apps have their own volume controls. Be sure to check them all.

Try connecting your speaker and headphones to a different USB port.

It’s possible that your speakers won’t work when your headphones are plugged in. Unplug your headphones and see if that helps.

If your cables and volume are OK, see the next sections for additional troubleshooting.

Check to make sure your audio devices aren’t muted and haven’t been disabled.

Right-click the Speakers icon on the taskbar, and then select Open Volume mixer.

You’ll see a set of volume controls for your devices. Make sure none of them are muted. If any of them are muted, you’ll see a red circle with a line through it next to the volume control. In that case, select the volume control to unmute.

Check your device properties to make sure that your devices have not been disabled by mistake. Select Start > Settings > System > Sound .

Select your audio device, and then select Device properties. Be sure to select Device properties for both the output and input devices.

Make sure the Disable check box is cleared for the output and input devices.

If that didn’t solve your problem, continue to the next tip.

Hardware problems can be caused by outdated or malfunctioning drivers. Make sure your audio driver is up to date and update it if needed. If that doesn’t work, try uninstalling the audio driver (it will reinstall automatically). If that doesn’t work, try using the generic audio driver that comes with Windows. If you’re having audio issues after installing updates, try rolling back your audio driver.

To update your audio driver automatically

In the search box on the taskbar, type device manager, then select it from the results.

Select the arrow next to Sound, video and game controllers to expand it.

Right-click the listing for your sound card or audio device, such as headphones or speakers, select Update driver, then select Search automatically for updated driver software. Follow the instructions to complete the update.

If Windows doesn’t find a new driver, look for one on the device manufacturer’s website and follow those instructions. If that doesn’t work, try uninstalling your audio driver.

To uninstall your audio driver

In the search box on the taskbar, type device manager, then select it from the results.

Select the arrow next to Sound, video and game controllers to expand it.

Right-click the listing for your sound card or audio device, select Uninstall device, select the Delete the driver software for this device check box, and then select Uninstall.

Restart your PC.

Note: Be sure to save documents and any other current work before you restart.

This restart will automatically prompt your PC to reinstall your audio driver.

To restart, select Start > Power > Restart .

If those options didn’t work, try using the generic audio driver that comes with Windows.

To use the generic audio driver that comes with Windows

In the search box on the taskbar, type device manager, then select it from the results.

Select the arrow next to Sound, video and game controllers to expand it.

Right-click the listing for your sound card or audio device, then select Update driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer.

Select the audio device whose driver you want to update, select Next, and then follow the instructions to install it.

If these steps didn’t solve your audio issue, visit your device manufacturer’s website and install the most recent audio/sound drivers for your device. Following is an example of a driver download page for a sound device manufacturer.

If you have audio issues after installing updates

If your audio was working before you ran Windows Update and now isn’t working, try rolling back your audio driver.

To roll back your audio driver

In the search box on the taskbar, type device manager, then select it from the results.

Select the arrow next to Sound, video and game controllers to expand it.

Right-click the listing for your sound card or audio device, then select Properties.

Select the Driver tab, then select Roll Back Driver.

Read and follow the instructions and then select Yes if you want to roll back your audio driver.

If rolling back your audio driver didn’t work or wasn’t an option, you can try to restore your PC from a system restore point.

Restore your PC from a system restore point

When Microsoft installs updates on your system, we create a system restore point in case problems arise. Try restoring from that point and see if that fixes your sound problems. For more info, see «Restore from a system restore point» in Recovery options in Windows 10.

If you’re connecting to an audio device—such as headphones or speakers—using USB or HDMI, you might need to set that device as the default audio device. If you’re using an external monitor that doesn’t have built-in speakers, make sure that the monitor isn’t already selected as your default output device. if it is, you won’t have any audio. You can check that when you set your default output audio device. Here’s how:

In the search box on the taskbar, type control panel, then select it from the results.

Select Hardware and Sound from the Control Panel, and then select Sound.

On the Playback tab, right-click the listing for your audio device, select Set as Default Device, and then select OK.

If setting your audio device as the default device doesn’t help, continue to the next tip for additional troubleshooting.

Sometimes having audio enhancements on can result in audio issues. Disabling them may resolve your issue.

In the search box on the taskbar, type control panel, then select it from the results.

Select Hardware and Sound from the Control Panel, and then select Sound.

On the Playback tab, right-click the Default Device, and then select Properties.

On the Enhancements tab, select either the Disable all enhancements or the Disable all sound effects check box (depending on which option you see), select OK, and try to play your audio device.

If that doesn’t work, on the Playback tab, select another default device (if you have one), select either the Disable all enhancements or the Disable all sound effects check box (depending on which option you see), select OK, and try to play audio again. Do this for each default device.

If turning off audio enhancements doesn’t help, see the next sections for additional troubleshooting.

In the search box on the taskbar, type services, then select it from the results.

Select each of the following services, right-click, and then select Restart:

Windows Audio Endpoint Builder

Remote Procedure Call (RPC)

If restarting these services doesn’t resolve your issue, see the next sections for more troubleshooting.

In the search box on the taskbar, type control panel, and then select it from the results.

Select Hardware and Sound from the Control Panel, and then select Sound.

On the Playback tab, right-click (or press and hold) Default Device, and then select Properties.

On the Advanced tab, under Default Format, change the setting, select OK,and then test your audio device. If that doesn’t work, try changing the setting again.

If trying different audio formats doesn’t help, see the next sections for additional troubleshooting.

Many updates require you to restart your device.

To check and see if you have installed updates pending and need to restart

Save your work and close all open applications.

Select Start > Power . If you have installed updates pending, you’ll see options to Update and restart and Update and shut down.

Select one of those restart options to apply the updates

If restarting doesn’t help, see the next section for additional troubleshooting.

Some audio problems might be caused by an issue with the audio system’s IDT High Definition Audio CODEC. This can be fixed with a manual driver update which allows you to choose the sound driver you want to use.

Note: Not all systems will have an IDT High Definition Audio CODEC.

To check and see if you have one, and to manually update the driver

In the search box on the taskbar, type device manager, then select it from the results.

Select the arrow next to Sound, video and game controllers to expand it.

Look for IDT High Definition Audio CODEC. If it’s listed, right-click it and select Update driver, then select Browse my computer for driver software > Let me pick from a list of device drivers on my computer.

You’ll see a list of pre-installed drivers. Select High Definition Audio Device, and then select Next.

1. Select Start > Settings > Privacy , and then select Microphone from the left menu.

Under Allow access to the microphone on this device, select Change. Make sure the toggle is turned On.

If you’re having this issue with a specific app, scroll down to Choose which Microsoft Store apps can access your microphone and make sure that the toggle next to that app is turned On as well.

Known issues with Office and Windows 10

Last updated: February 2020

Note: Microsoft 365 apps and services will not support Internet Explorer 11 starting August 17, 2021. Learn more. Please note that Internet Explorer 11 will remain a supported browser. Internet Explorer 11 is a component of the Windows operating system and follows the Lifecycle Policy for the product on which it is installed.

We’re working to fix the issues that may come up when using Office with Windows 10. In the meantime, please use the following workarounds to fix the problems.

Need more help?
If these workarounds don’t resolve your problem, use the options at the bottom of this page for support.

Common issues

Office documents open slower after Windows 10 Fall Creators Update

In Windows 10 Fall Creators Update, the active Antivirus product can dynamically scan Office documents via the Antivirus API for Office when you open them. This helps the active Antivirus product to detect malicious documents that obfuscate malicious content by employing techniques like document encryption. This scanning occurs with all versions of Office documents and could result in a delay of up to 1 second per document.

Microsoft is investigating this issue and will post an update here once the issue is resolved. For more information on this new behavior, see Introduction to the Antivirus API Reference for Office.

Windows screen is flickering or flashing after logging in

You might see a flickering screen if you’re running Microsoft 365, or Office 2016 build 16.0.7668.2066, which was released to a small group of customers between 1/25 and 1/30. As of 1/31, Microsoft 365 or Office 2016 build 16.0.7668.2074 is available and contains a fix.

To resolve this issue, please update Office to the newest version. Since the screen is flashing, you will need to do this using a command line. Please see this article for step by step instructions: Windows screen is flickering or flashing after logging in.

You can’t find Office applications after Windows 10 upgrade

Windows 10 doesn’t pin the Office apps to the Start menu or the Taskbar by default, but there are a few ways to find and open Office applications from the Start screen and taskbar in Windows 10.

How to upgrade to Windows 10 on new devices that include Microsoft 365

If you just purchased a new device that includes Microsoft 365, we recommend installing Office before upgrading to Windows 10.

You can’t print after upgrading to Windows 10

You may need to install new drivers for your printer. Also try running the printing troubleshooter to fix the issue.

You need help with licensing or product activation

After upgrading to Windows 10, Office apps display very large or very small on your monitor, or you have blurry text in your Office applications.

Error messages

You get an error when opening Office 2013 documents after upgrading from Windows 7 to Windows 10, such as Word experienced an error trying to open the file or This file is corrupt and cannot be opened.

To resolve this issue, start one of your Office 2013 applications, like Word, and then select File > Account > Update Options > Update Now to install the latest updates.

Outlook issues

After installing the Windows 10 Anniversary update, dragging emails to the file system or between folders does not work.

The issue affects all supported versions of Outlook 2010, 2013, and 2016. It may also happen with Mozilla Thunderbird.

Our engineering teams have investigated this issue, and are planning to release a fix in the near future. We’ll post back here when we have more information.

After installing Windows 10, Business Contact Manager (BCM) may crash due to chart control issues during .Net registration.

BCM depends on the .NET framework for some of its features.

When you click a hyperlink to a Web page in Outlook 2010 or Outlook 2007, you’re prompted to specify Internet Explorer 11 as default browser.

Let us know how we can help

If these workarounds don’t resolve your problem, do one of the following:

To leave us a comment, click the No box in the Was this information helpful? section below, and type your comment.

To talk to a support representative, click the Contact us button below.

To get help from the Office community, click Ask the community below.

To get more information about general Windows 10 Help and troubleshooting, see: Need help with Windows 10?.