How to Network Two Windows 10 Computers

Posted on February 5, 2020 by Mel Hawthorne 13 Comments

Connecting two Windows 10 computers together in an ad hoc local network can be useful, it can allow you to share files or game together when you can’t trust, or don’t have a wireless network. To do so, the first step is to plug a Crossover Ethernet Cable from one device into the other. Alternatively, this can also be done with the use of a hub or router – the steps will be the same. Make sure both computers are connected to the same one, and keep in mind that the connection type will be different depending on which type of connection you are using.

Once connected you need to configure the two Ethernet adapters to be able to communicate. Open Control panel and browse to Control Panel > Network and Internet > Network and Sharing Center and then click “Change adapter settings” on the left-hand side.

Change adapter settings.

Right-click on your Ethernet device and select properties. In the adapter properties, double click on “Internet Protocol Version 4 (TCP/IPv4)”.

Configure IPv4 settings.

Set the IP address to be 192.168.0.1 and the subnet mask to be 255.255.255.0 on the first device. On the second device, the IP address should be 192.168.0.2 and the subnet mask should be the same as the first host. Apply the changes by clicking ok until you’re back to the list of network adaptors.

Configure and IP address and subnet mask.

Once both computers are connected and have IP addresses assigned. Go back to Network and Sharing Center and click on “Change advanced sharing settings” on the left-hand side. In the advanced sharing settings menu, ensure “Turn on network discovery” and “Turn on automatic setup of network-connected devices” are both enabled.

Ensure network discovery is enabled.

Enabling network discovery will allow the Windows 10 devices to identify each other and communicate via network protocols. If you want to connect to a game, web or FTP server this should now work.

Should you want to share files through Windows’ file-sharing features, you will need to enable “File and printer sharing” from the same menu that you enabled network discovery. You will also need to configure the files and folders to be shared.

How to Connect Windows 10 Computers via USB

Connect Windows 10 computers via USB. – With the advancement in technology, displacement files from one computer to another has gone simple. A pen drive, a CD, or even a flash disk is not compulsory, but now a USB to USB cable can connect two PCs quite easily. However, a choice to transfer them through Bluetooth exists if you don’t occupy USB, etc.

Computers connected via a USB cable not only helps save time but also materials like CDs and DVDs. Now the question that arises is how can a USB help in connecting two computers running on Windows 10? The answer to this is very simple and can be explained easily.

Method to Connect Windows 10 Computers via USB

Requirement

1. Cable: The most preferred cable is the USB networking cable which is also known as the bridge cable. It has an inbuilt electronic circuit at its center which makes it the most preferred option. This helps in easy connection of two Windows 10 computers. For rapid and better transfer, a USB 2.0 cable is the most endorsed one as it has a superior transfer rate than a standard network connection. Many other alternate options are available in the market like the A/A cable but are not recommended as it does not have a bridge chip. This renders it useless for the purpose of making connection. Another reason, why A/A cable is not recommended, is because they may burn the USB port and the power supplies connected to it. You must avoid Buying A/A Cable.
2. Ethernet crossover cable: This USB 2.0 fabricates Ethernet network and role as the foundation in order to Connect Windows 10 Computers via USB. Hence, it permits transferring data amongst more than two computers at once. One of the computers must have an Ethernet adaptor and all the connected computers must have at least 1 USB port for this process to be completed.
3. Null modem serial cable: This cable does not contribute while reshuffling the files amongst more than two computers.
4. USB 2.0 Bridge chips: This chip accelerates the transferring. This will require a prerequisite Ethernet network of a minimum of 100mps or more.

Procedure to connect Windows 10 computers via USB:

Step 1 – Switch on Both the computers and log in having the Administrative authorities.

Step 2: Slide One end of the USB cable is into the port of the computer by positioning the USB Bridge into the aperture.

Step 3: Connect the remaining end of the Cable to the second computer by placing the USB Bridge in the USB port of the second computer.

Step 4: Once you carry out above-said operations, install the driver pertaining to the USB bridge cable. It is advisable to install this as a link adapter or a network adaptor. In case, you decide to experimentalize Link adaptor then you can transfer files from one computer to another. Instead, you exercise with network adaptor then all the computers connected in the network can be accessed.

Now you become successful to Connect Windows 10 Computers via USB.

How to set up and manage Windows 10 HomeGroup on a local network

HomeGroup is a network sharing feature that has been part of Windows for a long time, and it’s also part of Windows 10. Microsoft included HomeGroup to allow Windows devices to share resources with other PCs on a local network with an easy to set up approach that anyone can use.

HomeGroup is a feature best suited for small home networks to share files and printers with devices running Windows 10, Windows 8.1, and Windows 7. Also, you can also configure media streaming for other devices, such as Xbox One, to play music and video from your computer on the biggest screen in the house.

In this Windows 10 guide, we’ll walk you through the steps to set up and manage a HomeGroup to share resources with other users on your local network.

Before you begin

HomeGroup is very particular on the network configurations you use and if your computer was previously part of another HomeGroup. To make sure you will be able to configure everything correctly, shut down all other the computers on the network, leaving only the computer you’ll use to create the new HomeGroup turned on.

Additionally, you want to make sure all your devices are running Internet Protocol Version 6 (TCP/IPv6). Otherwise, you won’t be able to join any computers to HomeGroup.

1. Use the Windows key + X keyboard shortcut to open the Power User menu, and click Network Connections.
2. Right-click the network adapter you use to connect to the internet and select Properties.

Make sure to check the Internet Protocol Version 6 (TCP/IPv6) option.

How to create a HomeGroup on Windows 10

HomeGroup hasn’t changed much from previous versions, as such we’ll be using Control Panel to make the configuration.

Open the Start menu, do a search for HomeGroup and press Enter.

Click Create a homegroup.

Choose what to share on the network. By default Windows sets Pictures, Videos, Music, Printers & Devices as Shared. However, the Documents folder is marked as Not shared.

Note: The sharing options you choose will only apply to devices connecting with different accounts. If you sign-in with the same user account on another computer, you will have access to all files regardless of what you chose to share.

The wizard will complete the setup, and you’ll be presented with a HomeGroup password, which is needed to allow other computers to access files and printers. Write down or click the link to print the password.

Click Finish to complete the task.

How to change which content is shared with your HomeGroup

If at any time, you want to change the folders you share with other computers do the following:

Click the Change what you’re sharing with the homegroup link.

Click Finish to complete the task.

How to change your HomeGroup media streaming options

HomeGroup also allows you to control which media devices, including TV, Xbox One, Xbox 360, and PlayStation can access and stream the content shared on your computer.

On the HomeGroup settings page in Control Panel, click the Allow all devices on this network such as TVs and game console to play my shared content link.

The first thing you want to do is to pick a name for the media library, as Windows 10 by default uses your account’s email address.

Then you can click the Choose default settings link to change a few streaming settings, including star rating and parental control settings allowed to stream from another media device.

You can also change on which networks you will let devices stream shared content by using the Show devices on drop down menu.

In addition, you can configure which devices are allowed to play remote content. You can block or allow each device individually, or you can click the Allow All or Block All buttons.

Remember that shared content will be available to other devices as long the device sharing the content is turned on and when it’s not in sleep mode. If you need to change the power settings, click the Choose power options link.

How to change your HomeGroup password

If for security reasons you need to change the HomeGroup password, Windows gives you the option to change it at any time.

Click the Change the password link.

Click Change the password.

Click Finish.

Immediately after getting the password go to each computer’s HomeGroup settings in Control Panel, and click the Type new password button.

Type the new password and click Next.

Click Finish to complete the task.

How to add computers to a HomeGroup

Now it’s the time to turn on all the computers around the house and join them to the HomeGroup.

To join devices do the following:

Open the Start menu, do a search for HomeGroup and press Enter.

Click the Join now button.

Note: If you don’t see the Join now button, there is something wrong, make sure you’re connected to the network and restart your computer.

Select the content you want to share on the network by using the drop down menu for each folder and click Next.

Enter your HomeGroup password and click Next.

Note: If you’re signed into another computer, but you’re using your Microsoft Account, then you won’t be prompted to enter a password.

Click Finish to complete the task.

If you’re prompted to choose network privacy settings, make sure to select the Private option.

In the same way, you’ve done after configuring a new HomeGroup steps, for each machine you join, you’ll need to specify manually the media devices that will be allowed to stream shared content.

How to share additional folders with your HomeGroup on Windows 10

While setting up or joining a new computer to a HomeGroup you’re given the choice to share only your Pictures, Videos, Music, and Documents folders, but you can always share more folders.

You can share more content in two different ways, including adding new locations to the libraries currently being shared, or you can also share a new folder as you would normally do in Windows.

How to add new folders to shared HomeGroup libraries

1. Use the Windows key + E keyboard shortcut to open File Explorer.
2. On the left pane, expand your computer’s libraries on HomeGroup.
3. Right-click Documents.

Click Properties.

Click Add.

Select the folder you want to share and click Include folder.

Click Apply.

Click OK.

Now the folder will be accessible by anyone joined in the HomeGroup when they browse the Documents folder.

How to add new folder via Windows network share to your HomeGroup

Right-click the folder you want to share.

Select Share with and click the Homegroup (view) option.

Users can access the newly shared folder by:

1. Using the Windows key + E keyboard shortcut to open File Explorer.
2. Clicking Network on the left pane.

Double-clicking the computer name with shared content, and browsing the folder location.

By default, every HomeGroup folder shared on the network are set with read only permissions. It has to be this way to prevent accidental deletions and modification to your files by other users. However, if you’re using your same Microsoft account to access content from another computer, then you will have read and write permissions.

If you need other users to be able to access, modify, and delete content, the best solution is to share another folder and granting users view and edit permissions.

You can do this with the following instructions:

Right-click the folder you want to share.

Select Share with and click the Homegroup (view and edit) option.

How to remove a PC from your HomeGroup in Windows 10

When you no longer want a computer to be part of the HomeGroup, Microsoft makes it very easy remove a device without complicated configurations.

Click the Leave the homegroup link.

Click Leave the homegroup.

Click Finish to complete the task.

At any time, if you want to rejoin a computer, you can easily do this by using the join a computer to a HomeGroup instructions.

What to do when your HomeGroup isn’t working right

While Microsoft tried to design HomeGroup to be a feature that works effortlessly, at times things may not work as expected. Consider the following tips to troubleshoot and fix HomeGroup problems on Windows 10.

The first thing you always want to do is to make sure all the computer are connected to the network. You can verify by going to Settings > Network & internet. Depending on your connection, check Wi-Fi or Ethernet.

Often rebooting and trying to create or join a computer to a HomeGroup again will solve the problem.

Temporarily disable the firewall on your computer. If you’re using the Windows Firewall go to Control Panel\All Control Panel Items\Windows Firewall\Customize Settings, and turn off the firewall. If this is the problem, make sure to configure the firewall correctly, and don’t forget to re-enable the firewall after everything is working properly.

Having the incorrect time can also cause problems trying to set up a HomeGroup. Make sure every computer has the correct time. On Windows 10, go to Settings > Time & language and adjust time as needed.

You can’t have two computers on the network with the same name. Names must be unique on a HomeGroup. You can use our previous Windows 10 guide to rename your PC.

Make sure Network discovery, File and printer sharing, and HomeGroup connections are enabled on your private network. Simply go to Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings and turn on all these options.

Your computer can only belong to one HomeGroup, if the it’s connected to a different one, make sure to follow the steps to leave the HomeGroup before trying to join.

If you still can’t create or join a new computer to a HomeGroup, Microsoft is also including a diagnostic tool to fix common problems. On Windows 10, go to Control Panel\All Control Panel Items\HomeGroup, and click the Start the HomeGroup troubleshooter link and follow the on-screen directions to fix the problem.

Other things you need to know about HomeGroups

• HomeGroup is only available on Windows 7, Windows 8.x, and Windows 10, which means that you won’t be able to connect any Windows XP and Windows Vista machines.
• There can be only one HomeGroup per network.
• A HomeGroup does not create a hub and spoken network, where a central device has to be up and running for HomeGroup to work. However, the computer with shared content must be running for you to access its files and resources.
• Only computers joined with a HomeGroup password can use the resources on the local network.
• While HomeGroup has to be configured once per computer, each user must specify what content is accessible through the network.
• Once you set up a HomeGroup on a local network, users also have full access to view and edit content in the Public user folders.

Although we focus on configuring and managing HomeGroup on Windows 10, you can also connect Windows 7 and Windows 8.x computers to the network and share content.

How do you share files and other resources on your local network? Do you use HomeGroup? Let us know in the comments below.

Microsoft’s Surface Duo is not ‘failing up’

Microsoft announced this week that it was expanding Surface Duo availability to nine new commercial markets. While Surface Duo is undoubtedly a work in progress, this is not a sign of a disaster. It’s also doesn’t mean that Surface Duo is selling a ton either. Instead, the reason for the expansion is a lot more straightforward.

Here’s what you can do if Windows 10 update KB5001330 is causing issues

In this guide, we’ll show you the steps to get rid of the update KB5001330 to fix profile, gaming, and BSoD problems with the Windows 10 October 2020 Update and May 2020 Update.

Review: NZXT made its first AMD motherboard and it’s brilliant

NZXT made its first motherboard with an AMD chipset. The N7 B550 supports the latest AMD Ryzen processors and there’s plenty to love about this platform. To differentiate the N7 B550, NZXT made notable changes to the layout of the motherboard to make it easy to create a clean PC build.

These are the best PC sticks when you’re on the move

Instant computer — just add a screen. That’s the general idea behind the ultra-portable PC, but it can be hard to know which one you want. Relax, we have you covered!