Create bootable usb drive ubuntu mac os

Create bootable usb drive ubuntu mac os

With a bootable Ubuntu USB stick, you can:

• Install or upgrade Ubuntu, even on a Mac
• Test out the Ubuntu desktop experience without touching your PC configuration
• Boot into Ubuntu on a borrowed machine or from an internet cafe
• Use tools installed by default on the USB stick to repair or fix a broken configuration

Creating a bootable USB stick is very simple, especially if you’re going to use the USB stick with a generic Windows or Linux PC. We’re going to cover the process in the next few steps.

Apple hardware considerations

There are a few additional considerations when booting the USB stick on Apple hardware. This is because Apple’s ‘Startup Manager’, summoned by holding the Option/alt (⌥) key when booting, won’t detect the USB stick without a specific partition table and layout. We’ll cover this in a later step.

2. Requirements

• A 2GB or larger USB stick/flash drive
• An Apple computer or laptop running macOS
• An Ubuntu ISO file. See Get Ubuntu for download links

3. Prepare the USB stick

To ensure maximum compatibility with Apple hardware, we’re going to first blank and reformat the USB stick using Apple’s ‘Disk Utility’. But this step can be skipped if you intend to use the USB stick with only generic PC hardware.

• Launch Disk Utility from Applications>Utilities or Spotlight search
• Insert your USB stick and observe the new device added to Disk Utility
• Select the USB stick device (you may need to enable the option View>Show All Devices) and select Erase from the tool bar (or right-click menu)
• Set the format to MS-DOS (FAT) and the scheme to GUID Partition Map
• Check you’ve chosen the correct device and click Erase

Warning: Disk Utility needs to be used with caution as selecting the wrong device or partition can result in data loss.

4. Install and run Etcher

To write the ISO file to the USB stick, we’re going to use a free and open source application called Etcher. After downloading this and clicking to mount the package, Etcher can either be run in-place or dragged into your Applications folder.

By default, recent versions of macOS block the running of applications from unidentified developers. To side-step this issue, enable ‘App Store and identified developers’ in the ‘Security & Privacy’ pane of System Preferences. If you are still warned against running the application, click ‘Open Anyway’ in the same pane.

5. Etcher configuration

Etcher will configure and write to your USB device in three stages, each of which needs to be selected in turn:

Select image will open a file requester from which should navigate to and select the ISO file downloaded previously. By default, the ISO file will be in your Downloads folder.

Select drive, replaced by the name of your USB device if one is already attached, lets you select your target device. You will be warned if the storage space is too small for your selected ISO.

Flash! will activate when both the image and the drive have been selected. As with Disk Utility, Etcher needs low-level access to your storage hardware and will ask for your password after selection.

6. Write to device

After entering your password, Etcher will start writing the ISO file to your USB device.

The Flash stage of the process will show progress, writing speed and an estimated duration until completion. This will be followed by a validation stage that will ensure the contents of the USB device are identical to the source image.

When everything has finished, Etcher will declare the process a success.

Congratulations! You now have Ubuntu on a USB stick, bootable and ready to go.

Warning: After the write process has completed, macOS may inform you that ‘The disk you inserted was not readable by this computer’. Don’t select Initialise. Instead, select Eject and remove the USB device.

7. Boot your Mac

If you want to use your USB stick with an Apple Mac, you will need to restart or power-on the Mac with the USB stick inserted while the Option/alt (⌥) key is pressed.

This will launch Apple’s ‘Startup Manager’ which shows bootable devices connected to the machine. Your USB stick should appear as gold/yellow and labelled ‘EFI Boot’. Selecting this will lead you to the standard Ubuntu boot menu.

Finding help

If your Mac still refuses to boot off your USB stick you may find it easier to boot and install off an Ubuntu DVD instead. See our How to burn a DVD on macOS for further details.

Alternatively, if you feel confident using the macOS command line, see the community documentation on How to install Ubuntu on MacBook using USB Stick for a more manual approach.

If you want to install Ubuntu, follow our install Ubuntu desktop tutorial.

Finally, if you get stuck, help is always at hand:

Источник

How to Create a Bootable Ubuntu USB Drive for Mac in OS X

Last updated November 30, 2014 By Abhishek Prakash 83 Comments

Here’s the scenario. You have got a Macbook and want to install Ubuntu on it or perhaps on some other system.

I am going to show you two ways of creating a live Linux USB in macOS:

1. Create live USB using Etcher GUI tool
2. Create live USB using command line

I’ll also tell you how to boot from a live Linux USB on a MacBook.

For both methods, you need:

• A USB key (pen drive) of at least 4 GB in size
• Internet connection for downloading Linux ISO and tools

I am using Ubuntu in this tutorial but it should work for other Linux distributions as well.

Let’s start with the graphical method first.

Method 1: Create live Ubuntu USB in macOS with Etcher

Trust me, the Etcher tool makes live USB creation a painless task. All you need to do is to download Linux ISO, download Etcher, plugin the USB and hit the flash button.

I won’t leave you at that description. Let me show the steps in detail.

Step 1: Download the ISO image of Ubuntu Linux

The first step is to download the ISO of Ubuntu or whichever Linux you want to use. I show the steps for Ubuntu.

Head over to Ubuntu website. You’ll find the latest Ubuntu releases under the download section. Download the one you like.

You can also use torrents to download Ubuntu if you have a slow and/or inconsistent internet.

Step 2: Download and install Etcher on macOS

The next step is to download Etcher. You can get it from the homepage of the project website.

It is downloaded in DMG format. As a macOS user you probably already know how to install DMG file. Double click on the downloaded file and it will open the installer. Drag the Etcher icon to the Applications icon. That’s it.

Step 3: Using Etcher to create bootable Linux USB

Plugin your USB. Make sure that there is no important data on it because it will be formatted.

Next, start Etcher. It should automatically recognize the plugged in USB (unless there are more than one). If it does not, click on the ‘Target’ button and select the correct USB device.

Browse to the downloaded Linux ISO file and hit the flash button.

It will take a few minutes at the most to complete the process. When the process completes, you should see a message that the “disk you inserted was not readable by this computer“.

That is okay. It’s just that the USB is now in a format your macOS does not like and hence it complains. Once the purpose of Linux USB is over, you can use Gparted tool in macOS or Linux to format this USB back to normal.

As long as Etcher gives you a success message about flash completion, no need to worry about it.

Step 4: Booting from the live Ubuntu USB on macOS

You should verify if the live USB works. To do that, restart your macOS. At start up when the Apple tune starts up, press and hold option (or alt) key.

You should see a few options. If you see two EFI Boot options, choose either of them.

You should see the grub screen with option to boot into live Ubuntu session (the first option). Select it and enjoy it.

Method 2: Create bootable Ubuntu USB in macOS using command line

This is an old method but evergreen method. I used this method when Etcher did not exist.

Be careful while using the command. Following all the steps carefully will have you going. Let’s see what you need to for a bootable USB:

Step 1: Format the USB drive

Apple is known for defining its own standards and no surprises that Mac OS X has its own file system type known as Mac OS Extended or HFS Plus. So the first thing you would need to do is to format your USB drive in Mac OS Extended format.

To format the USB drive, plug in the USB key. Go to Disk Utility program from Launchpad (A rocket symboled icon in the bottom plank).

• In Disk Utility, from the left hand pane, select the USB drive to format.
• Click the Partition tab in the right side pane.
• From the drop-down menu, select 1 Partition.
• Name this drive anything you desire.
• Next, change the Format to Mac OS Extended (Journaled)

The screenshot below should help you.

There is one last thing to do before we go with formatting the USB. Click the Options button in the right side pane and make sure that the partition scheme is GUID Partition Table.

When all is set to go, just hit the Apply button. It will give you a warning message about formatting the USB drive. Of course hit the Partition button to format the USB drive.

Step 2: Download Ubuntu

Of course, you need to download ISO image of Ubuntu desktop. Jump to Ubuntu website to download your favorite Ubuntu desktop OS. Since you are using a Macbook Air, I suggest you to download the 64 Bit version of whichever version you want. Ubuntu 14.04 is the latest LTS version, and this is what I would recommend to you.

Step 3: Convert ISO to IMG

The file you downloaded is in ISO format but we need it to be in IMG format. This can be easily done using hdiutil command tool. Open a terminal, either from Launchpad or from the Spotlight, and then use the following command to convert the ISO to IMG format:

Normally the downloaded file should be in

/Downloads directory. So for me, the command is like this:

You might notice that I did not put a IMG extension to the newly converted file. It is fine as the extension is symbolic and it is the file type that matters not the file name extension. Also, the converted file may have an additional .dmg extension added to it by Mac OS X. Don’t worry, it’s normal.

Step 4: Get the device number for USB drive

The next thing is to get the device number for the USB drive. Run the following command in terminal:

It will list all the ‘disks’ currently available in the system. You should be able to identify the USB disk by its size. To avoid confusion, I would suggest that you should have just one USB drive plugged in. In my case, the device number is 2 (for a USB of size 8 GB): /dev/disk2

When you got the disk number, run the following command:

Where N is the device number for the USB you got previously. So, in my case, the above command becomes:

The result should be: Unmount of all volumes on disk2 was successful.

Step 5: Creating the bootable USB drive of Ubuntu in Mac OS X

And finally we come to the final step of creating the bootable USB drive. We shall be using dd command which is a very powerful and must be used with caution. Therefore, do remember the correct device number of your USB drive or else you might end up corrupting Mac OS X.

Here, we are using dd (copy and convert) to copy and convert input file (if) IMG to diskN. I hope you remember where you put the converted IMG file, in step 3. For me the command was like this:

As we are running the above command with super user privileges (sudo), it will require you to enter the password. Similar to Linux, you won’t see any asterisks or something to indicate that you have entered some keyboard input, but that’s the way Unix terminal behaves.

Even after you enter the password, you won’t see any immediate output and that’s normal. It will take a few minutes for the process to complete.

Step 6: Complete the bootable USB drive process

Once the dd command finishes its process, you may see a dialogue box saying: The disk you inserted was not readable by this computer.

Don’t panic. Everything is just fine. Just don’t click either of Initialize, Ignore or Eject just now. Go back to the terminal. You’ll see some information about the last completed process. For me it was:

1109+1 records in
1109+1 records out
1162936320 bytes transferred in 77.611025 secs (14984164 bytes/sec)

Now, in the terminal use the following command to eject our USB disk:

N is of course the device number we have used previously which is 2 in my case:

Once ejected, click on Ignore in the dialogue box that appeared previously. Now your bootable USB disk is ready. Remove it from the system.

Step 7: Checking your newly created bootable USB disk

Once you have completed the mammoth task of creating a live USB of USB in Mac OS X, it is time to test your efforts.

• Plugin the bootable USB and reboot the system.
• At start up when the Apple tune starts up, press and hold option (or alt) key.
• This should present you with the available disks to boot in to. I presume you know what to do next.

For me it showed tow EFI boot:

I selected the first one and it took me straight to Grub screen:

I hope this guide helped you to create a bootable USB disk of Ubuntu for Mac in OS X. We’ll see how to dual boot Ubuntu with OS X in next article. Stay tuned.

Like what you read? Please share it with others.

Источник