Create file in linux kernel

4 Ways to Create a Text File in Linux Terminal

In this Linux beginner series, you’ll learn various methods to create a text file in Linux terminal.

If you have used the desktop oriented operating system such as Windows, creating file is a piece of cake. You right click in the file explorer and you would find the option of creating new file.

Things won’t look the same when you are in a command line environment. There is no right click option here. So how do you create a file in Linux then? Let me show you that.

Create file in Linux command line

There are various ways of creating a new file in Linux terminal. I’ll show you the commands one by one. I am using Ubuntu here but creating files in Ubuntu terminal is the same as any other Linux distribution.

1. Create an empty file using touch command

One of the biggest usages of the touch command in Linux is to create a new empty file. The syntax is super simple.

If the file doesn’t exist already, it will create a new empty file. If a file with the same name exists already, it will update the timestamps of the file.

2. Create files using cat command

Another popular way of creating new file is by using the cat command in Linux. The cat command is mostly used for viewing the content of a file but you can use it to create new file as well.

You can write some new text at this time if you want but that’s not necessary. To save and exit, use Ctrl+D terminal shortcut.

If the file with that name already exists and you write new text in it using the cat command, the new lines will be appended at the end of the file.

3. Create new file using echo command

The main use of the echo command is to simply repeat (echo) what you type on the screen. But if you use the redirection with echo, you can create a new file.

To create a new empty file using echo you can use something like this:

The newly created filename.txt file will have the following text: This is a sample text. You can view the file in Linux using cat or other viewing commands.

You are not obliged to put a sample text with echo. You can create an (almost) empty file using the echo command like this:

This will create a new file with just one empty line. You can check the number of lines with wc command.

4. Create a new file using a text editor like Nano or Vim

The last method in this series is the use of a text editor. A terminal-based text editor such as Emacs, Vim or Nano can surely be used for creating a new file in Linux.

Before you use these text editors, you should make sure that you know the basics such as saving an existing from the editor. Unlike the GUI tools, using Ctrl+S in the terminal won’t save the file. It could, in fact, send your terminal into a seemingly frozen state from which you recover using Ctrl+Q.

Let’s say you are going to use Vim editor. Make sure that you are aware of the basic vim commands, and then open a new file with it like this:

What’s your favorite command?

So, I just shared 4 different ways of creating a file in Linux. Personally, I prefer using touch for creating empty file and Vim if I have to edit the file. On a related note, you may want to learn about the file command in Linux that is helpful in determining the actual type of the file.

Which command do you prefer here? Please share your views in the comment section below.

Источник

Create file in linux kernel

In the kernel code, you can’t just use memcpy between an address supplied by user-space and the address of a buffer in kernel-space:

• Correspond to completely different address spaces (thanks to virtual memory).
• The user-space address may be swapped out to disk.
• The user-space address may be invalid (user space process trying to access unauthorized data).

You must use dedicated functions in your read and write file operations code:

Implementing the Write Handler

The write handler is similar to the read handler. The only difference is that the user buffer type is a const char pointer. We need to copy the data from the user buffer to the requested position and return the number of bytes copied

In this example we want to set both values using a simple command:

The first value is the irq number and the second is the mode.

The code for the write handler:

Again, we check if this is the first time we call write (position 0) , then we use copy_from_user to memcpy the data from the user address space to the kernel address space. We extract the values, check for errors , update the position and return the number of bytes we received

The complete module code:

Note : to implement more complex proc entries , use the seq_file wrapper

User Space Application

You can open the file and use read/write functions to test the module. Don’t forget to move the position bask to 0 after each operation:

You can find the full source code here

12 thoughts on “ Linux Kernel Development – Creating a Proc file and Interfacing With User Space ”

please add a tutorial for INTERRUPT handling in linux device drivers also

I had to replace line 6, from:
#include

I implemented a pretty similar module like this one (as I am practicing on one of the code projects in OS System Concepts book).
But I got a problem with proc_write() function when I echo into /proc file, like this:

echo “1234” > /proc/pid
bash: /proc/pid: cannot overwrite existing file

I also check the kernel log but only proc_read() was logged
Please help me out of this.

Thank you for the clear and simple example for demonstrating the usage of the proc file system. The example works if it is tested with the included user mode application.I tried the example with Ubuntu 20.

I got no output testing the driver with the console command sequence “cat /proc/mydev”. After some debugging, the count parameter value is 131702 when reading with the “cat” command. 131702 is greater than the 100 defined for the BUFSIZE causing the read function to return -EFAULT. I changed the logic to make sure there is enough space to hold the output for reading in ‘buf’ and only copy from ‘buf’ to ‘ubuf’ for no more than the count size. Both reading with the application and “cat” command delivers the same result with the new logic.

Nice post, Thanks!

Looks like this code is obsolete in Ubuntu 20.04 LTS, the create_proc() function has changed

./include/linux/proc_fs.h:108:24: note: expected ‘const struct proc_ops *’ but argument is of type ‘struct file_operations *’
108 | struct proc_dir_entry *proc_create(const char *name, umode_t mode, struct proc_dir_entry *parent, const struct proc_ops *proc_ops);

Yes, Same error here

yes, the interface has changed, this is the problem of writing kernel code , change the type to proc_ops and the callback name to proc_read

cheers Liran that worked, Ubuntu not helpful in that apt-get source linux downloads the wrong version of the kernel, so all example code does not compile, doh!

Источник

Building External Modules¶

This document describes how to build an out-of-tree kernel module.

1. Introduction¶

“kbuild” is the build system used by the Linux kernel. Modules must use kbuild to stay compatible with changes in the build infrastructure and to pick up the right flags to “gcc.” Functionality for building modules both in-tree and out-of-tree is provided. The method for building either is similar, and all modules are initially developed and built out-of-tree.

Covered in this document is information aimed at developers interested in building out-of-tree (or “external”) modules. The author of an external module should supply a makefile that hides most of the complexity, so one only has to type “make” to build the module. This is easily accomplished, and a complete example will be presented in section 3.

2. How to Build External Modules¶

To build external modules, you must have a prebuilt kernel available that contains the configuration and header files used in the build. Also, the kernel must have been built with modules enabled. If you are using a distribution kernel, there will be a package for the kernel you are running provided by your distribution.

An alternative is to use the “make” target “modules_prepare.” This will make sure the kernel contains the information required. The target exists solely as a simple way to prepare a kernel source tree for building external modules.

NOTE: “modules_prepare” will not build Module.symvers even if CONFIG_MODVERSIONS is set; therefore, a full kernel build needs to be executed to make module versioning work.

2.1 Command Syntax¶

The command to build an external module is:

The kbuild system knows that an external module is being built due to the “M= ” option given in the command.

To build against the running kernel use:

Then to install the module(s) just built, add the target “modules_install” to the command:

2.2 Options¶

($KDIR refers to the path of the kernel source directory.)

make -C $KDIR M=$PWD

The directory where the kernel source is located. “make” will actually change to the specified directory when executing and will change back when finished.

Informs kbuild that an external module is being built. The value given to “M” is the absolute path of the directory where the external module (kbuild file) is located.

2.3 Targets¶

When building an external module, only a subset of the “make” targets are available.

make -C $KDIR M=$PWD [target]

The default will build the module(s) located in the current directory, so a target does not need to be specified. All output files will also be generated in this directory. No attempts are made to update the kernel source, and it is a precondition that a successful “make” has been executed for the kernel.

The default target for external modules. It has the same functionality as if no target was specified. See description above.

Install the external module(s). The default location is /lib/modules/ /extra/, but a prefix may be added with INSTALL_MOD_PATH (discussed in section 5).

Remove all generated files in the module directory only.

List the available targets for external modules.

2.4 Building Separate Files¶

It is possible to build single files that are part of a module. This works equally well for the kernel, a module, and even for external modules.

Example (The module foo.ko, consist of bar.o and baz.o):

3. Creating a Kbuild File for an External Module¶

In the last section we saw the command to build a module for the running kernel. The module is not actually built, however, because a build file is required. Contained in this file will be the name of the module(s) being built, along with the list of requisite source files. The file may be as simple as a single line:

The kbuild system will build .o from .c, and, after linking, will result in the kernel module .ko. The above line can be put in either a “Kbuild” file or a “Makefile.” When the module is built from multiple sources, an additional line is needed listing the files:

NOTE: Further documentation describing the syntax used by kbuild is located in Linux Kernel Makefiles .

The examples below demonstrate how to create a build file for the module 8123.ko, which is built from the following files:

3.1 Shared Makefile¶

An external module always includes a wrapper makefile that supports building the module using “make” with no arguments. This target is not used by kbuild; it is only for convenience. Additional functionality, such as test targets, can be included but should be filtered out from kbuild due to possible name clashes.

The check for KERNELRELEASE is used to separate the two parts of the makefile. In the example, kbuild will only see the two assignments, whereas “make” will see everything except these two assignments. This is due to two passes made on the file: the first pass is by the “make” instance run on the command line; the second pass is by the kbuild system, which is initiated by the parameterized “make” in the default target.

3.2 Separate Kbuild File and Makefile¶

In newer versions of the kernel, kbuild will first look for a file named “Kbuild,” and only if that is not found, will it then look for a makefile. Utilizing a “Kbuild” file allows us to split up the makefile from example 1 into two files:

The split in example 2 is questionable due to the simplicity of each file; however, some external modules use makefiles consisting of several hundred lines, and here it really pays off to separate the kbuild part from the rest.

The next example shows a backward compatible version.

Here the “Kbuild” file is included from the makefile. This allows an older version of kbuild, which only knows of makefiles, to be used when the “make” and kbuild parts are split into separate files.

3.3 Binary Blobs¶

Some external modules need to include an object file as a blob. kbuild has support for this, but requires the blob file to be named _shipped. When the kbuild rules kick in, a copy of _shipped is created with _shipped stripped off, giving us . This shortened filename can be used in the assignment to the module.

Throughout this section, 8123_bin.o_shipped has been used to build the kernel module 8123.ko; it has been included as 8123_bin.o:

Although there is no distinction between the ordinary source files and the binary file, kbuild will pick up different rules when creating the object file for the module.

3.4 Building Multiple Modules¶

kbuild supports building multiple modules with a single build file. For example, if you wanted to build two modules, foo.ko and bar.ko, the kbuild lines would be:

It is that simple!

4. Include Files¶

Within the kernel, header files are kept in standard locations according to the following rule:

If the header file only describes the internal interface of a module, then the file is placed in the same directory as the source files.

If the header file describes an interface used by other parts of the kernel that are located in different directories, then the file is placed in include/linux/.

There are two notable exceptions to this rule: larger subsystems have their own directory under include/, such as include/scsi; and architecture specific headers are located under arch/$(SRCARCH)/include/.

4.1 Kernel Includes¶

To include a header file located under include/linux/, simply use:

kbuild will add options to “gcc” so the relevant directories are searched.

4.2 Single Subdirectory¶

External modules tend to place header files in a separate include/ directory where their source is located, although this is not the usual kernel style. To inform kbuild of the directory, use either ccflags-y or CFLAGS_ .o.

Using the example from section 3, if we moved 8123_if.h to a subdirectory named include, the resulting kbuild file would look like:

Note that in the assignment there is no space between -I and the path. This is a limitation of kbuild: there must be no space present.

4.3 Several Subdirectories¶

kbuild can handle files that are spread over several directories. Consider the following example:

To build the module complex.ko, we then need the following kbuild file:

As you can see, kbuild knows how to handle object files located in other directories. The trick is to specify the directory relative to the kbuild file’s location. That being said, this is NOT recommended practice.

For the header files, kbuild must be explicitly told where to look. When kbuild executes, the current directory is always the root of the kernel tree (the argument to “-C”) and therefore an absolute path is needed. $(src) provides the absolute path by pointing to the directory where the currently executing kbuild file is located.

5. Module Installation¶

Modules which are included in the kernel are installed in the directory:

And external modules are installed in:

5.1 INSTALL_MOD_PATH¶

Above are the default directories but as always some level of customization is possible. A prefix can be added to the installation path using the variable INSTALL_MOD_PATH:

INSTALL_MOD_PATH may be set as an ordinary shell variable or, as shown above, can be specified on the command line when calling “make.” This has effect when installing both in-tree and out-of-tree modules.

5.2 INSTALL_MOD_DIR¶

External modules are by default installed to a directory under /lib/modules/$(KERNELRELEASE)/extra/, but you may wish to locate modules for a specific functionality in a separate directory. For this purpose, use INSTALL_MOD_DIR to specify an alternative name to “extra.”:

6. Module Versioning¶

Module versioning is enabled by the CONFIG_MODVERSIONS tag, and is used as a simple ABI consistency check. A CRC value of the full prototype for an exported symbol is created. When a module is loaded/used, the CRC values contained in the kernel are compared with similar values in the module; if they are not equal, the kernel refuses to load the module.

Module.symvers contains a list of all exported symbols from a kernel build.

6.1 Symbols From the Kernel (vmlinux + modules)В¶

During a kernel build, a file named Module.symvers will be generated. Module.symvers contains all exported symbols from the kernel and compiled modules. For each symbol, the corresponding CRC value is also stored.

The syntax of the Module.symvers file is:

The fields are separated by tabs and values may be empty (e.g. if no namespace is defined for an exported symbol).

For a kernel build without CONFIG_MODVERSIONS enabled, the CRC would read 0x00000000.

Module.symvers serves two purposes:

It lists all exported symbols from vmlinux and all modules.

It lists the CRC if CONFIG_MODVERSIONS is enabled.

6.2 Symbols and External Modules¶

When building an external module, the build system needs access to the symbols from the kernel to check if all external symbols are defined. This is done in the MODPOST step. modpost obtains the symbols by reading Module.symvers from the kernel source tree. During the MODPOST step, a new Module.symvers file will be written containing all exported symbols from that external module.

6.3 Symbols From Another External Module¶

Sometimes, an external module uses exported symbols from another external module. Kbuild needs to have full knowledge of all symbols to avoid spitting out warnings about undefined symbols. Two solutions exist for this situation.

NOTE: The method with a top-level kbuild file is recommended but may be impractical in certain situations.

Use a top-level kbuild file

If you have two modules, foo.ko and bar.ko, where foo.ko needs symbols from bar.ko, you can use a common top-level kbuild file so both modules are compiled in the same build. Consider the following directory layout:

The top-level kbuild file would then look like:

will then do the expected and compile both modules with full knowledge of symbols from either module.

Use “make” variable KBUILD_EXTRA_SYMBOLS

If it is impractical to add a top-level kbuild file, you can assign a space separated list of files to KBUILD_EXTRA_SYMBOLS in your build file. These files will be loaded by modpost during the initialization of its symbol tables.

7. Tips & Tricks¶

7.1 Testing for CONFIG_FOO_BAR¶

Modules often need to check for certain CONFIG_ options to decide if a specific feature is included in the module. In kbuild this is done by referencing the CONFIG_ variable directly:

External modules have traditionally used “grep” to check for specific CONFIG_ settings directly in .config. This usage is broken. As introduced before, external modules should use kbuild for building and can therefore use the same methods as in-tree modules when testing for CONFIG_ definitions.

© Copyright The kernel development community.

Источник