Cyberjack rfid basis linux

Cyberjack rfid basis linux

Copy raw contents

Copy raw contents

USB CCID IFD Handler

This package provides the source code for a generic USB CCID (Chip/Smart Card Interface Devices) and ICCD (Integrated Circuit(s) Card Devices) driver. See the USB CCID [1] and ICCD [2] specifications from the USB working group.

• Ludovic Rousseau ludovic.rousseau@free.fr
• Carlos Prados for the PPS and ATR parsing code (taken from his towitoto driver) in towitoko/ directory.
• Olaf Kirch for the T=1 TPDU code (from the OpenCT package) in openct/ directory. I (Ludovic Rousseau) greatly improved this code.

CCID and ICCD readers:

A reader can be in one of these list:

Supported operating systems:

• GNU/Linux (libusb 1.0)
• MacOS X/Darwin (libusb 1.0)

See also https://ccid.apdu.fr/ for more information.

The driver uses the debug function provided by pcscd. So if pcscd sends its debug to stdout ( pcscd —foreground ) then the CCID driver will also send its debug to stdout. If pcscd sends its debug to syslog (by default) then the CCID driver will also send its debug to syslog.

You can change the debug level using the Info.plist configuration file. The Info.plist file is installed, by default, in /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist or set the environment variable LIBCCID_ifdLogLevel .

The debug level is set in the ifdLogLevel field. It is a binary OR combination of 4 different levels.

• 1: critical: important error messages
• 2: info: informative messages like what reader was detected
• 4: comm: a dump of all the bytes exchanged between the host and the reader
• 8: periodic: periodic info when pcscd test if a card is present (every 1/10 of a second)

By default the debug level is set to 3 (1 + 2) and correspond to the critical and info levels.

You have to restart the driver so it reads the configuration file again and uses the new debug level value. To restart the driver you just need to unplug all your CCID readers so the driver is unloaded and then replug your readers. You can also restart pcscd.

You can change the voltage level using the Info.plist configuration file. The Info.plist is installed, by default, in /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist

The voltage level is set in the ifdDriverOptions field. It is a binary OR combination of 4 different levels.

• 0: power on the card at 5V (default value)
• 16: power on the card at 3V and, if 3V fails then use 5V
• 32: power on the card at 1.8V, then 3V and then 5V
• 48: let the reader decide

By default the voltage level is set to 0 and corresponds to 5V.

You have to restart the driver so it reads the configuration file again and uses the new voltage level value. To restart the driver you just need to unplug all your CCID readers so the driver is unloaded and then replug your readers. You can also restart pcscd.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

1.4.36 — 30 August 2021, Ludovic Rousseau

• Add support of
  • Lenovo Lenovo Smartcard Wired Keyboard II
  • REINER SCT tanJack USB
  • SafeNet eToken 5110+ FIPS
  • SafeNet eToken 5300 C
  • jSolutions s.r.o. Multi SIM card reader 4/8
• parse: fix check when bNumDataRatesSupported = 0

1.4.35 — 25 July 2021, Ludovic Rousseau

• Add support of
  • ArkSigner Connect2Sign
  • Circle CCR7115 ICC
  • Circle CCR7315
  • Circle CIR215 CL
  • Circle CIR215 PICC
  • Circle CIR315
  • Circle CIR315 (idProduct: 0x3100)
  • Circle CIR315 CL
  • Circle CIR315 Dual & 1S
  • Circle CIR415 CL & 1S
  • Circle Idaxis SecurePIV
  • DUALi DE-ABCM6 RFRW
  • Feitian R701
  • Generic EMV Smartcard Reader (0x058C:0x9590)
  • INMAX DWR18 HC
  • INMAX DWR18 HPC
  • Identiv Identiv uTrust 4711 F CL + SAM Reader
  • Identiv uTrust 3721 Contactless Reader
  • Infocrypt HWDSSL DEVICE
  • Infocrypt Token++ lite
  • MK Technology KeyPass D1
  • SONY Felica RC-S300/P
  • SONY Felica RC-S300/S
  • SONY Felica RC-S660/U
  • SYNNIX CL-2100R
  • SoloKeys Solo 2
  • Spyrus Inc PocketVault P-3X (idProduct: 0x3203)
• parse: use «ICCD token» for ICCD tokens
• Support 4 card slots with Feitian R502 C9
• ccid_usb: ask for bNumDataRatesSupported data rates
• Solve a performance issue with T=1 and CCID_CLASS_AUTO_PPS_PROP
• Fix a possible buffer overflow in T0ProcACK
• IFDHSetProtocolParameters: set IFSC/IFSD only for TPDU readers
• CCID serial: Reset buffers on failed read
• Fix yylex missing symbol
• Gemalto pinpad: fix incorrect bEntryValidationCondition for SecurePINVerify and SecurePINModify
• Fix bit4id miniLector-EVO pinpad support
• The Kobil TriBank reader does NOT support extended APDU

1.4.34 — 24 January 2021, Ludovic Rousseau

• Add support of
  • ACS ACR1252IMP Reader
  • ACS CryptoMate EVO
  • Aktiv Rutoken SCR 3001 Reader
  • Avtor KP-375BLE
  • Avtor SC Reader KP382
  • BIT4ID mLector AIR DI V3
  • BIT4ID miniLector AIR NFC v3
  • Bit4id Digital-DNA Key (ProductID 0x2354)
  • Canokeys Canokey
  • DESKO GmbH IDenty chrom
  • DESKO GmbH PENTA Scanner
  • FT Biopass CCID
  • FT Biopass FIDO2
  • FT Biopass KB CCID
  • FT Biopass KB FIDO CCID
  • Feitian BLE CCID Dongle
  • Feitian R805
  • Feitian vR504 Contactless Reader
  • GoTrust Idem Key
  • Identiv uTrust 3720 Contactless Reader
  • Sunrex HP USB Business Slim Smartcard CCID Keyboard
  • sysmocom — s.f.m.c. GmbH sysmoOCTSIM
• Fail if the requested protocol is not supported by reader
• Disable USB suspend for the AlcorMicro AU9520 reader
• Return «no smart card» if we get notified during a transmit
• Minor improvements reported by Maksim Ivanov
• Some other minor improvements

1.4.33 — 25 June 2020, Ludovic Rousseau

• Add support of
  • Genesys Logic CCID Card Reader (idProduct: 0x0771)
  • Swissbit Secure USB PU-50n SE/PE
  • TOPPAN FORMS CO.,LTD TC63CUT021
• add —enable-oslog argument for macOS use os_log(3) for macOS >= 10.12 (Sierra)
• Update PCSC submodule to get Unicode support
• Some minor improvements

1.4.32 — 22 April 2020, Ludovic Rousseau

• Add support of
  • AF Care One (idProduct: 0xAFC0)
  • AF Care One (idProduct: 0xAFC1)
  • AF Care Two (idProduct: 0xAFC2)
  • AF Care Two (idProduct: 0xAFC3)
  • Access IS ATR210
  • Access IS ATR220
  • Cherry GmbH CHERRY SECURE BOARD 1.0
  • Doctolib SR with idProduct: 0xAFD0
  • Doctolib SR with idProduct: 0xAFD1
  • Doctolib SR with idProduct: 0xAFD2
  • Doctolib SR with idProduct: 0xAFD3
  • F-Secure Foundry USB Armory Mk II
  • Gemalto RF CR5400
  • Ledger Nano X support
  • Purism, SPC Librem Key
  • SPECINFOSYSTEMS DIAMOND HSM
  • SPECINFOSYSTEMS DIAMOND PLUS token
  • SPECINFOSYSTEMS DIAMOND PRO token
  • SpringCard E518 (idProduct: 0x6112)
  • SpringCard E518 (idProduct: 0x611A)
  • SpringCard H518 (idProduct: 0x6122)
  • SpringCard H518 (idProduct: 0x612A)
  • SpringCard Puck
  • SpringCard Puck (dProduct: 0x613A)
  • SpringCard SpringCore (idProduct: 0x6012)
  • SpringCard SpringCore (idProduct: 0x601A)
  • Sysking MII136C
• Add SCardGetAttrib(. SCARD_ATTR_CHANNEL_ID, ..) for USB devices
• Increase the timeout used to detect the Identiv uTrust 3700/3701 F readers
• Fix PowerOn bug for ICCD type A & B devices
• Fix «Bus Error» on SPARC64 CPU and Solaris C compiler
• Cherry KC 1000 SC
  • Add support of min & max PIN size
  • Fix a bNumberMessage issue
• Add support of min & max PIN size for the Omnikey 3821
• Disable pinpad for Chicony HP Skylab USB Smartcard Keyboard
• Some minor improvements

1.4.31 — 10 August 2019, Ludovic Rousseau

• Add support of
  • ACS ACR1252 Reader
  • Aladdin R.D. JaCartaReader
  • Alcor Link AK9563
  • AvestUA AvestKey
  • Avtor SecureToken (idProduct: 0x0020)
  • Bit4id TokenME EVO v2
  • Bit4id miniLector AIR EVO
  • Bit4id miniLector Blue
  • Broadcom Corp 58200 (idProduct: 0x5843)
  • Broadcom Corp 58200 (idProduct: 0x5844)
  • Broadcom Corp 58200 (idProduct: 0x5845)
  • Certgate GmbH ONEKEY ID 2 USB
  • HID Global Crescendo Key 0x0028
  • HID Global Crescendo Key 0x0029
  • HID Global Crescendo Key 0x002B
  • HID Global Crescendo Key 0x002D
  • Identiv SCR3500 C Contact Reader
  • InfoCert WirelessKey
  • NXP PN7462AU CCID
  • Route1 MobiKEY Fusion3
  • SPECINFOSYSTEMS DIAMOND token
• MacOSX/configure: fix checking error for dynamic library libusb
• Some minor improvements for debug

1.4.30 — 19 September 2018, Ludovic Rousseau

• The project moved to https://ccid.apdu.fr/
• Add support of
  • ACS ACR33 ICC Reader
  • BIFIT ANGARA
  • Broadcom Corp 58200
  • Certgate GmbH AirID 2 USB
  • DC.Ltd DC4 5CCID READER
  • Genesys Logic CCID Card Reader
  • Genesys Logic Combo Card Reader
  • InfoThink IT-500U Reader
  • Spyrus Inc WorkSafe Pro (ProductID 0x3117)
• Disabled readers
  • REINER SCT cyberJack RFID standard
• Update reader names for
  • Fujitsu Keyboard KB100 SCR
  • Fujitsu Keyboard KB100 SCR eSIG
  • FujitsuTechnologySolutions GmbH Keyboard KB SCR2
  • Yubico YubiKey CCID
  • Yubico YubiKey FIDO+CCID
  • Yubico YubiKey OTP+CCID
  • Yubico YubiKey OTP+FIDO+CCID
• Fix libusb config descriptor leak
• Fix leaking an allocated bundle in case no matching reader was found

1.4.29 — 21 February 2018, Ludovic Rousseau

• Add support of
  • Access IS NFC Smart Module (With idProduct 0x0164)
  • Bit4id Digital-DNA Key
  • Bit4id Digital-DNA Key BT
  • Bluink Ltd. Bluink CCID
  • Chicony HP Skylab USB Smartcard Keyboard
  • HID Global OMNIKEY 5023 Smart Card Reader
  • HID Global OMNIKEY 5027CK CCID CONFIG IF
  • KeyXentic Inc. KX906 Smart Card Reader
  • Spyrus Inc Rosetta USB
  • Spyrus Inc WorkSafe Pro
  • Watchdata USB Key (idProduct: 0x0418)
• The C3PO LTC31 v2 wrongly declares PIN support
• Remove extra EGT patch because if has bad side effects

1.4.28 — 11 October 2017, Ludovic Rousseau

• Add support of
  • Athena IDProtect Flash
  • Elatec TWN4/B1.06/CPF3.05/S1SC1.32/P (Beta 3)
  • HID Global OMNIKEY 5122 Dual
  • HID Global OMNIKEY 5122 Smartcard Reader
  • IIT E.Key Crystal-1
  • KRONEGGER Micro Core Platform
  • KRONEGGER NFC blue Reader Platform
  • Ledger Nano S
  • REINER SCT cyberJack RFID standard
  • REINER SCT cyberJack one
  • SAFETRUST SABRE SCR
  • SafeNet eToken 5300
  • Unicept GmbH AirID USB Dongle
  • Watchdata USB Key
  • mCore SCard-Reader
• Disabled readers
  • Jinmuyu Electronics Co., Ltd. MR800
• Fix non-pinpad HID global devices
• udev rules:
  • allow rule overwrite
  • Disable USB autosuspend on C3PO LTC31 v1 reader
• Some minor improvements

1.4.27 — 21 May 2017, Ludovic Rousseau

• Add support of
  • ACS ACR1255U-J1
  • ACS CryptoMate (T2)
  • ANCUD CCID USB Reader & RNG
  • DUALi DE-620 Combi
  • FT CCID
  • FT CCID KB
  • FT U2F CCID KB
  • FT U2F CCID KBOARD
  • HID Global OMNIKEY 5422 Smartcard Reader
  • InfoThink IT-102MU Reader
  • Kapsch TrafficCom USB SAM reader
  • MK Technology KeyPass S1
  • Mulann PVT
  • Regula RFID Reader
  • Spyrus Inc PocketVault P-3X
  • Unicept GmbH AirID USB
• Add Microchip SEC1210 UART support (when connected on a serial port)
• Add Zero Length Packet (ZLP) support for Gemalto IDBridge CT30 and K30 enable the patch using ./configure —enable-zlp
• Add support of HID Omnikey 5422 as multi slot reader (for macOS)
• Escape command: signals buffer overflow instead of silently truncating the buffer
• Fix a bug with multi readers and pcscd uses hotplug_libusb (not the recommended configuration)
• Some minor improvements

1.4.26 — 7 January 2017, Ludovic Rousseau

• Add support of
  • Bit4id Digital DNA Key
  • Bit4id tokenME FIPS v3
  • INGENICO Leo
  • appidkey GmbH ID60-USB
• PowerOn: the default algorithm is now 5V then 1.8V then 3V then fail. It is still possible to change the initial voltage in the Info.plist file. Now, in any case, all the values are tried before failing.
• Negotiate maximum baud rate when bNumDataRatesSupported = 0
• Some minor improvements

1.4.25 — 30 September 2016, Ludovic Rousseau

• Add support of
  • Aladdin R.D. JaCarta (idProduct: 0x0402)
  • Broadcom Corp 5880 (idProduct: 0x5832)
  • Broadcom Corp 5880 (idProduct: 0x5833)
  • Broadcom Corp 5880 (idProduct: 0x5834)
  • ESMART Token GOST X2 ET1020-A
  • Feitian VR504 VHBR Contactless & Contact Card Reader
  • Feitian bR500
  • Gemalto K50
  • appidkey GmbH ID100-USB SC Reader
  • appidkey GmbH ID50 -USB
• Remove suport of
  • Broadcom Corp 5880 (idProduct: 0x5800)
  • Broadcom Corp 5880 (idProduct: 0x5805)
  • KEBTechnology KONA USB SmartCard
• macOS: Fix composite device enumeration
• Fix crash with GemCore Pos Pro and GemCore Sim Pro
• Some minor improvements

1.4.24 — 22 May 2016, Ludovic Rousseau

• Add support of
  • Generic USB Smart Card Reader
  • Giesecke & Devrient GmbH StarSign CUT S
  • HID AVIATOR Generic
• better support of Elatec TWN4 SmartCard NFC
• better support of SCM SCL011
• betetr support of HID Aviator generic
• fix SCARD_ATTR_VENDOR_IFD_SERIAL_NO attribute size
• fix a race condition on card events with multiple readers
• Some minor improvements

1.4.23 — 20 April 2016, Ludovic Rousseau

• Add support of
  • ACS ACR3901U ICC Reader
  • Alcor Micro AU9560
  • Cherry SmartTerminal XX44
  • HID Global OMNIKEY 3×21 Smart Card Reader
  • HID Global OMNIKEY 5022 Smart Card Reader
  • HID Global OMNIKEY 6121 Smart Card Reader
  • IonIDe Smartcard Reader reader
  • KACST HSID Reader
  • KACST HSID Reader Dual Storage
  • KACST HSID Reader Single Storage
• Remove support of
  • VMware Virtual USB CCID
• Do NOT add support of
  • DUALi DE-ABCM6
• Fix a busy loop consuming 100% of CPU for some composite USB devices impacted readers: Yubico Yubikey NEO U2F+CCID and Broadcom BCM5880
• Remove support of (unused) option DRIVER_OPTION_RESET_ON_CLOSE
• log libusb error name instead of decimal value
• Some minor improvements

1.4.22 — 10 January 2016, Ludovic Rousseau

• Add support of
  • Aktiv Rutoken PINPad 2
  • Aladdin R.D. JC-WebPass (JC600)
  • Aladdin R.D. JCR-770
  • Aladdin R.D. JaCarta
  • Aladdin R.D. JaCarta Flash
  • Aladdin R.D. JaCarta LT
  • Aladdin R.D. JaCarta U2F (JC602)
  • Athena ASEDrive IIIe Combo Bio PIV
  • Athena ASEDrive IIIe KB Bio PIV
  • GEMALTO CT1100
  • GEMALTO K1100
  • Hitachi, Ltd. Hitachi Biometric Reader
  • Hitachi, Ltd. Hitachi Portable Biometric Reader
  • Nitrokey Nitrokey Storage
  • THURSBY SOFTWARE TSS-PK1
  • Thursby Software Systems, Inc. TSS-PK7
  • Thursby Software Systems, Inc. TSS-PK8
• Patch for Microchip SEC1110 reader on Mac OS X (card events notification)
• Patch for Cherry KC 1000 SC (problem was with a T=1 card and case 2 APDU)
• Fix support of FEATURE_MCT_READER_DIRECT for the Kobil mIDentity visual reader
• Set timeout to 90 sec for PPDU (Pseudo APDU) commands. This change allows the use of a Secure Verify command sent as a PPDU through SCardTransmit().
• Fix a crash when reader reader initialization failed
• Fix initialization bug with Gemalto Pinpad reader on Mac OS X
• Some minor bugs fixed

1.4.21 — 21 October 2015, Ludovic Rousseau

• Add support of
  • ACS ACR1252 Dual Reader
  • Chicony HP USB Smartcard CCID Keyboard JP
  • Chicony HP USB Smartcard CCID Keyboard KR
  • FT ePass2003Auto
  • Feitian bR301 BLE
  • Feitian iR301 (ProductID 0x0619)
  • Feitian iR301 (ProductID 0x061C)
  • Identiv @MAXX ID-1 Smart Card Reader
  • Identiv @MAXX Light2 token
  • Identiv CLOUD 2980 F Smart Card Reader
  • Identiv Identiv uTrust 4701 F Dual Interface Reader
  • Identiv SCR3500 A Contact Reader
  • Identiv SCR3500 B Contact Reader
  • Identiv SCR35xx USB Smart Card Reader
  • Identiv uTrust 2900 R Smart Card Reader
  • Identiv uTrust 2910 R Smart Card Reader
  • Identiv uTrust 2910 R Taglio SC Reader
  • Identiv uTrust 3512 SAM slot Token
  • Identiv uTrust 3522 embd SE RFID Token
  • Identiv uTrust 3700 F CL Reader
  • Identiv uTrust 3701 F CL Reader
  • Identive Identive CLOUD 4000 F DTC
  • Liteon HP SC Keyboard — Apollo (Liteon)
  • Liteon HP SC Keyboard — Apollo JP (Liteon)
  • Liteon HP SC Keyboard — Apollo KR (Liteon)
  • Nitrokey Nitrokey HSM
  • Nitrokey Nitrokey Pro
  • Nitrokey Nitrokey Start
  • Rocketek RT-SCR1
  • VASCO DIGIPASS 875
  • WatchCNPC USB CCID Key
• Remove support of
  • Crypto Stick Crypto Stick v1.4 is an old version of Nitrokey Nitrokey Pro
  • Free Software Initiative of Japan Gnuk Token is an old version of Nitrokey Nitrokey Start
• Add Feitain R502 dual interface (composite) reader on Mac OS X
• display a human readable version of the error code returned by libusb
• Mac OS X: wait until libusb/the reader is ready
• some minor bugs fixed

1.4.20 — 5 August 2015, Ludovic Rousseau

• Add support of
  • ACS ACR1251 Dual Reader
  • Access IS NFC Smart Module
  • BIFIT iToken
  • BLUTRONICS BLUDRIVE II CCID (idProduct: 0x1079)
  • Generic MultiCard Device
  • NXP Pegoda 2 N
  • SafeNet eToken 5100
  • SafeNet eToken 7300
  • Yubico Yubikey 4 CCID
  • Yubico Yubikey 4 OTP+CCID
  • Yubico Yubikey 4 OTP+U2F+CCID
  • Yubico Yubikey 4 U2F+CCID
• Depends on libusb version 1.0.9 instead of 1.0.8
• The O2 Micro Oz776 reader only supports 9600 bps
• Change installation directory for Mac OS X El Capitan 10.11

1.4.19 — 13 May 2014, Ludovic Rousseau

• Add support of
  • AK910 CKey (idProduct 0x0001)
  • AK910 CKey (idProduct 0x0011)
  • AK910 IDONE
  • Broadcom Corp 5880 (idProduct: 0x5804)
  • CASTLES EZCCID Smart Card Reader
  • Cherry KC 1000 SC
  • Cherry KC 1000 SC Z
  • Cherry KC 1000 SC/DI
  • Cherry KC 1000 SC/DI Z
  • Cherry TC 1300
  • Chicony USB Smart Card Keyboard
  • Elatec TWN4 SmartCard NFC
  • Feitian 502-CL
  • Feitian eJAVA Token
  • FujitsuTechnologySolutions GmbH Keyboard KB100 SCR
  • FujitsuTechnologySolutions GmbH Keyboard KB100 SCR eSIG
  • Hewlett-Packard HP lt4112 Gobi 4G Module
  • Identive SCT3522CC token
  • OMNIKEY AG 6121 USB mobile
  • PIVKey T800
  • REINER SCT tanJack Bluetooth
  • Watchdata USB Key
• Add syslog(3) debug for Mac OS X Yosemite. Use: sudo syslog -c «com.apple.ifdreader PID» -d to change the logging level. See also «Change syslog logging level on Yosemite» http://ludovicrousseau.blogspot.com/2015/03/change-syslog-logging-level-on-yosemite.html
• Remove ZLP patch for Gemalto IDBridge CT30 and K30. The patch was causing problems with the K50. A new reader firmware (version F) solved the problem so the patch is no more needed.
• Fix a memory leak in an error path
• some minor bugs removed

1.4.18 — 13 September 2014, Ludovic Rousseau

• Add support of
  • Cherry Cherry TC 1100
  • Cherry Smart Card Reader USB
  • Cherry Smartcard Keyboard G87-1xx44
  • FujitsuTechnologySolutions GmbH Keyboard KB SCR2
  • Lenovo Lenovo USB Smartcard Keyboard
  • Yubico Yubikey NEO OTP+U2F+CCID
  • Yubico Yubikey NEO U2F+CCID
  • eID_R6 001 X8
• fix support of Omnikey CardMan 3121
• reduce memory consumed when configured with —enable-embedded
• prepare the port to UEFI

1.4.17 — 11 June 2014, Ludovic Rousseau

• Add support of
  • Feitian R502
  • Free Software Initiative of Japan Gnuk Token
  • German Privacy Foundation Crypto Stick v2.0
  • HID Global veriCLASS Reader
  • HID OMNIKEY 5025-CL
  • Identive Technologies Multi-ISO HF Reader — USB
  • OMNIKEY 5421
  • OMNIKEY AG 3121 USB
  • udea MILKO V1.
• Fix support of O2 Micro Oz776. The reader is limited to 9600 bps
• some minor bugs removed

1.4.16 — 23 March 2014, Ludovic Rousseau

• Add support of
  • Crypto Stick Crypto Stick v1.4
  • Hewlett Packard USB Smartcard CCID Keyboard
  • IID AT90S064 CCID READER
  • INSIDE Secure VaultIC 405 Smart Object
  • INSIDE Secure VaultIC 441 Smart Object
  • Microchip SEC1110
  • Microchip SEC1210
  • Watchdata W5181
• Add support of DRIVER_OPTION_DISABLE_PIN_RETRIES The Gemalto pinpad reader sends a VERIFY command with no PIN value in order to retreive the remaining retries from the card. Some cards (like the OpenPGP card) do not support this. It is now possible to disable this behavior from the Gemalto Pinpad and Covadis Véga Alpha.
• add support of WTX received before SW during Secure Pin Entry Verify The Swiss health care card sends a WTX request before returning the SW code. If the reader is in TPDU and the card is in T=1 the driver must manage the request itself.

1.4.15 — 14 February 2014, Ludovic Rousseau

• Add support of
  • DUALi DRAGON NFC READER
  • Feitian bR301
  • Gemalto CR30 reader in serial communication
  • Gemalto Ezio Shield Pro SC
  • IIT E.Key Almaz-1C
• PIN_MODIFY_STRUCTURE & PIN_VERIFY_STRUCTURE: Fix calculation of the command length after pcsc-lite 1.8.9 (October 2013) changed the PCSC/reader.h header
• Add specific PIN min (0) & max (25) sizes for SmartTerminal ST-2xxx
• Do not get the data rates if bNumDataRatesSupported = 0
• Support Gemalto features for pinpad readers MinimumPINSize, MaximumPINSize and bEntryValidationCondition are fetched from the reader firmware
• disable (broken) pinpad for Fujitsu SmartCase KB SCR eSIG
• examples/scardcontrol.c:
  • Parse codes returned by a pinpad (as SW1/SW2) Known codes for now are: 0x9000: Success 0x6400: Timeout 0x6401: Cancelled by user 0x6402: PIN mismatch 0x6403: Too short or too long PIN
  • Retrieve min and max PIN sizes from the driver
  • Retrieve bEntryValidationCondition from the driver
• be more strict for bInterfaceClass = 255 by also checking extra_length
• some minor bugs removed

1.4.14 — 25 November 2013, Ludovic Rousseau

• Add support of
  • Gemalto GemCore SIM Pro firmware 2.0 (using USB)
• report FEATURE_IFD_PIN_PROPERTIES only for pinpad readers
• Generalize the management of (old) readers with bDeviceClass = 0xFF
• some minor bugs removed

1.4.13 — 9 October 2013, Ludovic Rousseau

• Add support of
  • Access IS ePassport Reader
  • Planeta RC700-NFC CCID
• Add support of Windows value for CM_IOCTL_GET_FEATURE_REQUEST Windows uses 0x313520 for SCARD_CTL_CODE(3400) pcsc-lite uses 0x42000D48 for SCARD_CTL_CODE(3400) RDP aplications (like rdesktop) will convert SCardControl() commands from a Windows application (so using 0x313520) to pcsc-lite.
• fix multi-slot support for card movement notification (introduced in 1.4.12)
• Mac OS X: differentiate each libccid library by the dynamic linker using —prefix=/fake/$BUNDLE_ID
• some minor bugs removed

1.4.12 — 12 August 2013, Ludovic Rousseau

• Add support of
  • HID OMNIKEY 5127 CK
  • HID OMNIKEY 5326 DFR
  • HID OMNIKEY 5427 CK
  • Ingenico WITEO USB Smart Card Reader (Base and Badge)
  • SecuTech SecuTech Token
• Add support of card movement notifications for multi-slot readers
• Check libusb is at least at version 1.0.8
• Get the serialconfdir value from pcsc-lite pkg config instead of using $(DESTDIR)/$(sysconfdir)/reader.conf.d/
• Disable class driver on Mac OS X
• Update the bundle name template to include the vendor name
• some minor bugs removed

1.4.11 — 12 June 2013, Ludovic Rousseau

• Add support of . Gemalto IDBridge CT30 . Gemalto IDBridge K30 . SCM Microsystems Inc. SCL010 Contactless Reader . SCM Microsystems Inc. SDI011 Contactless Reader . THRC reader
• Better management of time extension requests
• parse: better support of devices with bInterfaceClass = 0xFF
• udev rule file: Remove setting group to pcscd, remove support of Linux kernel 0.1.12 or —enable-usb-interrupt is used. libusb pkg-config libpcsclite —cflags to locate the pcsc-lite header files
• use pkg-config —print-errors —atleast-version=1.2.9-beta5 libpcsclite to test the pcsc-lite version
• code improvements thanks to the splint tool (http://www.splint.org/)

0.9.1 — 1 July 2004, Ludovic Rousseau

• I forgot to define IFD_PARITY_ERROR in a .h file

0.9.0 — 1 July 2004, Ludovic Rousseau

• The T=1 TPDU automata from Carlos Prados’ Towitoko driver is very limited and do not support error management mechanisms. I then used the T=1 TPDU automata from OpenCT (OpenSC project). This automata is much more powerful but still lacks a lot of error management code. I then added all the needed code to reach the quality level requested by the EMV standard.
• add support for new readers:
  • Advanced Card Systems ACR 38
  • Cherry XX33
  • Dell keyboard SK-3106
  • Dell smart card reader keyboard
  • SCR 333
• add support of multi procotol cards (T=0 and T=1)
• the debug level is now dynamic and set in the Info.plist file (no need to recompile the driver any more)
• add support for the libusb naming scheme: usb:%04x/%04x:libusb:%s
• INSTALL: add a «configuring the driver for the serial reader (GemPC Twin)» part
• use pkg-config libpcsclite —variable=usbdropdir so you do not have to use —enable-usbdropdir=DIR or —enable-ccidtwindir=DIR even if pcscd does not use the default /usr/local/pcsc/drivers
• add support of IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE and IOCTL_SMARTCARD_VENDOR_VERIFY_PIN in IFDHControl()
• read ifdDriverOptions from Info.plist to limit the use of IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE (idea from Peter Williams)
• provide an example of use of SCardControl() IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE and IOCTL_SMARTCARD_VENDOR_VERIFY_PIN in example/
• add a —enable-pcsclite option (default to yes) so that the driver can be compiled for a different framework (one needing tokenparser.l like Solaris)
• Reset action is power off and power on, not just power on
• use the include files from pcsc-lite
• add a mechanism to allow power on at 1.8V, 3V and then 5V as specified by ISO 7816. We still use 5V for now to avoid problems with non ISO compliant cards

0.4.1 — 14 February 2004, Ludovic Rousseau

• distribute missing files readers/supported_readers.txt and src/create_Info_plist.pl ‘make install’ failed because of this.

0.4.0 — 13 February 2004, Ludovic Rousseau

• support of T=1 with TPDU readers. A lot of the T=1 code comes from Carlos Prados towitoko driver. My code is GNU GPL, his code is GNU LGPL so the global driver is GNU GPL
• PPS negotiation if the reader does not do it automatically
• add support for the Silitek SK-3105 keyboard. It’s a USB device with multiple interfaces
• use the create_Info_plist.pl script to generate the installed Info.plist from an Info.plist template and a list of supported readers. The Info.plist was too «complex» to maintain by hand since it now contains 11 entries
• add support of IFDHCreateChannelByName to avoid wrong reader enumeration. This is not complete if you have multiple identical readers. You need to use a > 1.2.0 pcsc-lite version (not yet released at that time)
• build but do not install the serial ccidtwin driver by default since it is useless on computers without a serial port or without this reader for example.
• read and write timeouts are not symmetric. write timout can be shorter since the reader and card is not supposed to do anything before receiving (write) a command
• do not try to find usb.h and other libusb files if —disable-libusb is used. Needed if you only want to build the serial driver. Thanks to Niki Waibel for the patch
• add a —enable-ccidtwindir argument to ./configure to specify the serial GemPC Twin installation directory
• debug and code improvements and simplifications

0.3.2 — 4 November 2003, Ludovic Rousseau

• src/commands.c: correct a stupid bug that occurs with an APDU with 2 bytes response.
• Info.plist: add SPR 532 in list of supported readers
• parse.c: do not exit if the InterfaceClass is 0xFF (proprietary). It is the case with old readers manufactured before the final release of the CCID specs.
• move LTC31 reader from unsupported to supported reader list. It was my f ault since in used odd INS byte in my test applet and odd INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte. Thanks to Josep Moné s Teixidor for pointing the problem.
• src/commands.c: comment out the automatic GET RESPONSE part. I don’t think it should be in the driver. Maybe in pcscd instead?

0.3.1 — 23 September 2003, Ludovic Rouseau

• add —enable-multi-thread (enabled by default) for thread safe support an APDU multiplexing. You will need pcsc-lite-1.2.0-rc3 or above to use this feature.
• add —enable-libusb=PATH option is your libusb is not installed in /usr or /usr/local
• honor DESTDIR in install rules (closes [ #300110 ]). Thanks to Ville Skyttä for the patch.
• src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU mode since it also swicth in EMV mode and may not work with non EMV cards
• src/ccid_serial.c: complete reimplementation of the Twin serial protocol using a finite state automata (code much simpler)

0.3.0 — 10 September 2003, Ludovic Rousseau

• support of GemPC Twin connected to a serial port. Thanks to Niki W. Waibel for a working prototype.
• support of auto voltage at power up if the reader support it instead of forcing a 5V in all cases.
• support of APDU mode instead of just TPDU if the reader support it. Thanks to Jean-Luc Giraud for the idea and inspiration I got from his «concurrent» driver.
• support of «time request» from the card.
• parse: new indentation for more readability of supported features.
• switch the GemPC Key and GemPC Twin in APDU mode since they support it but do not announce it in the dwFeatures.
• new build process using autoconf/automake.

Источник