Disable screensaver linux mint

Настройки экранной заставки в Linux Mint

Привет, сегодня в статье мы рассмотрим основные параметры экранной заставки в операционной системе Linux Mint, а именно я покажу, как сменить экранную заставку, как полностью ее отключить, как изменить время ожидания перед запуском заставки, а также как отключить блокировку компьютера после запуска заставки.

Для начала давайте разберемся, что же такое «Экранная заставка»?

Что такое экранная заставка?

Экранная заставка (Screensaver) – это программа, которая запускается через определенное время бездействия компьютера и выводит на всем экране монитора статическую или анимированную картинку, тем самым заменяя изображение на экране, а также заставка позволяет отображать время или другую информацию, в случае необходимости можно вообще ничего не выводить, например, отображать только черный экран. У программ такого типа существуют и другие названия, например: хранитель экрана, скринсейвер или screensaver, но все это является одним и тем же, иными словами, назначение таких программ одинаковое.

Экранные заставки могут быть использованы и в целях безопасности, например, можно задать параметр, при котором компьютер будет блокироваться при включении заставки, для разблокировки компьютера потребуется ввести пароль пользователя. Это полезно в тех случаях, когда за компьютером работает несколько пользователей или к компьютеру могут получить физический доступ посторонние люди, т.е. например Вы отошли от компьютера на неопределенное время и забыли его заблокировать или выйти из системы, экранная заставка, после того как запустится, может заблокировать компьютер за Вас.

На заметку! Если Вы обычный пользователь домашнего компьютера и хотите познакомиться с Linux поближе, рекомендую почитать мою книгу – « Linux для обычных пользователей », в ней я подробно рассказываю про основы операционной системы Linux

Экранная заставка в Linux Mint

Сразу скажу, что рассматривать настройки экранной заставки мы будем на примере версии Linux Mint 18.3 Cinnamon.

По умолчанию в Linux Mint экранная заставка настроена следующим образом: в качестве экранной заставки используется стандартный экран блокировки, на данном экране отображается время на черном фоне, запускается заставка через 15 минут бездействия компьютера, после запуска заставки компьютер блокируется немедленно. Выглядит заставка следующим образом.

После того как Вы пошевелите мышкой или щелкните по клавишам клавиатуры, у Вас отобразится окно ввода пароля, для того чтобы разблокировать компьютер.

Как открыть настройки экранной заставки в Linux Mint 18.3?

Все настройки экранной заставки в Linux Mint расположены в параметрах системы, они так и называются «Экранная заставка». Для того чтобы запустить параметры системы нажмите «Меню->Параметры системы».

Читайте также:  Платформа windows server appfabric настроена неправильно sharepoint

Затем в разделе «Параметры» найдите пункт «Экранная заставка».

Также можно запустить параметры экранной заставки и другим способом, например, сразу в меню найти данный пункт. Он находится также в параметрах.

В итоге у Вас отобразятся настройки экранной заставки Linux Mint.

Как сменить экранную заставку в Linux Mint?

Для того чтобы сменить экранную заставку просто в настройках на первой вкладке выбирайте подходящую заставку из представленного перечня.

Как изменить время ожидания перед запуском заставки?

Для того чтобы изменить время ожидания перед запуском, в настройках экранной заставки на вкладке «Настройки», измените параметр задержки на нужное Вам значение. В случае если Вы выберите значение «Никогда», то экранная заставка запускаться не будет, т.е. будет отключена.

Как отключить блокировку компьютера после запуска заставки в Linux Mint?

Если Вы хотите, чтобы компьютер не блокировался после запуска заставки, то в настройках экранной заставки на вкладке «Настройки», в разделе «Настройки блокировки», выключите соответствующий параметр.

На вкладке «Настроить» есть еще несколько полезных параметров, например, Вы можете отобразить на стандартном экране блокировки рядом с часами свое собственное сообщение или сделать так, чтобы часы вообще не отображались.

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

[SOLVED] Mint 18: How do I disable the screensaver?

[SOLVED] Mint 18: How do I disable the screensaver?

Post by matt » Wed Jul 27, 2016 3:29 pm

Hi everyone. In Mint 18 Cinnamon, the screensaver settings does not seem to have the GUI feature to disable the screensaver like in Mint 18 Mate. Is there a command that I can run in terminal in order to accomplish this without running into instability/dependency issues?

Thank you for your help in advance.

Re: Mint 18: How do I disable the screensaver?

Post by Cosmo. » Wed Jul 27, 2016 3:38 pm

Of course you can disable the screensaver from the settings GUI: select «never» for the time of inactivity.

You might want to do the same setting in the power settings for the monitor, to prevent, that your monitor gets black.

Re: Mint 18: How do I disable the screensaver?

Post by matt » Thu Jul 28, 2016 6:23 pm

Re: [SOLVED] Mint 18: How do I disable the screensaver?

Post by White Phoenix » Mon May 14, 2018 8:37 pm

Re: [SOLVED] Mint 18: How do I disable the screensaver?

Post by Faust » Tue May 15, 2018 4:12 am

In 18.3 Cinnamon , I use an applet called » inhibit » to do this ( inhibit@cinnamon.org )

It puts an icon near the clock and network icons , and clicking on it gives the option
of toggling » Power management » from «1» to «0» .

Just what I want , with no permanent changes to the main screensaver/power settings .

IIRC , get it by right-clicking on empty space on the desktop .

Re: [SOLVED] Mint 18: How do I disable the screensaver?

Post by MtnDewManiac » Tue May 15, 2018 6:23 pm

I’ll be brief because you’ve asked in a Cinnamon thread (in the Cinnamon DE section of the forum), but look for the setting associated with screensaver use/activation within MATE that deals with how long the computer should be inactive — and, by that, I mean not being actively used by a person (as opposed to not actually doing anything, which is probably far rarer in a computer ) before activating the screensaver. It is probably either a sliding scale (move slider to number of minutes) or a box with arrows to increase/decrease the number of minutes. I am guessing that, below «1,» you’ll either see a «0» or the word «Never.» Set the time delay to that (0 is basically a misnomer, as a true zero-setting would, AfaIK, see the screensaver get activated every time the user stopped moving the mouse, released the key that he/she had just depressed, et cetera).

Читайте также:  Recovery windows 10 ошибка 0xc0000034

Mint 18 Xfce 4.12.

If guns kill people, then pencils misspell words, cars make people drive drunk, and spoons made Rosie O’Donnell fat.

Re: [SOLVED] Mint 18: How do I disable the screensaver?

Post by White Phoenix » Tue May 15, 2018 11:25 pm

Источник

How do I completely turn off screensaver and power-management?

I looking for a method to turn-off the screensaver and powermanager but from the command line.

I’m aware this can be done via the GUI screen — but can this be done via the command line or via some configuration editor?

Here is the gui way (via the «screen» or «brightness and lock» application):

10 Answers 10

For 11.10

Disable the GNOME Settings Deamon’s power plugin from the command line:

Alternatively, using dconf-editor from the dconf-tools package:

For the screensaver:

Or again via dconf-editor :

You might find that the above solution is necessary, but not sufficient. The screen might still be blanking after 10 minutes. This is a default setting compiled into Xorg.

To disabled it for the current session, run:

You can put this in your .xsession file to disable it upon every login.

You didn’t specify if you want permanent solution or temporary solution. If you want to turn off screensaver and power management for e.g. 2 hours, you can simply inhibit those features.

In practice, you can simply run

As an alternative, you may want to inhibit screensaver and power management until a given process has completed. For example,

would inhibit screensaver and power management until download has finished.

See man systemd-inhibit for more details. It allows you do disable only selected features and allows setting user visible string to explain why these features are inhibited (nice if your system has multiple users).

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

disabling the screensaver

disabling the screensaver

Post by nomko » Sat Jun 28, 2014 7:08 pm

I noticed this weird «bug» under Mint 71 Mate (and on my other machine running Mint 13 Mate): the screensaver kicks in after a few minutes without any reason. When i’m watching a movie with Vlc under Mint 17 Mate, the screensaver turns the screen to black after a couple of minutes. I’ve set the screensaver time even to 2 hours and still it kicks in after a few minutes. Very, very annoying! With my system running Mint 13 it onl;y happens when i watch embedded movies in websites or Youtube.

My question is: how to disable the Mate screensaver for hood? Just to inform you: I’ve uninstalled the screensaver on my Mint 17 system without any success.

Читайте также:  Disk scanning in linux

Re: disabling the screensaver

Post by Adelante » Sat Jun 28, 2014 7:59 pm

Re: disabling the screensaver

Post by nomko » Tue Jul 01, 2014 4:15 am

@ Adelante :
I’ll give your solution a try. Hopefully it works on Mint 17.

It really is very annoying and obnoxious that it has to work that way. If the developers want to correct this problem, please let them do so! With this 5-year supported Mint 17/LTS version they surely must have more time to fix this issue

Re: disabling the screensaver

Post by nomko » Tue Jul 01, 2014 4:57 pm

Nope, didn’t worked!

I also noticed that under Mint 16 Mate (32-bit) this issue doesn’t exist when watching movies under Vlc, only when watching movies in a webbrowser/Youtube. I don’t know about the 64-bit version of Mint 16 Mate, but with Mint 17 Mate it is present.

Mint 16 uses Vlc 2.0.8
Mint 17 uses Vlc 2.1.4

Any difference in this?

Re: disabling the screensaver

Post by woodsman » Tue Jul 01, 2014 7:18 pm

Try disabling this option: ‘Activate screen saver when computer is idle’.

Video apps should be smart enough to override screen savers. VLC should have such an option if not automatic.

Re: disabling the screensaver

Post by nomko » Wed Jul 02, 2014 2:59 am

Re: disabling the screensaver

Post by xana40 » Fri Sep 12, 2014 10:30 am

Can I get someone to re-visit this question. I Installed Linux Mint 17 about a month ago on my desktop computer. One of the first things I do is disable the screensaver and power management set to never. It seemed to be working as expected until last week. Now, after about 5 to 10 minutes of inactivity, it blanks the display. I’ve tested this and it is not the Mate screensaver app since no screensaver is actually displayed. From what I’ve read, it is xorg that sees the system at startup and configures itself as the power manager. When I run xset -q , this is the result:
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 30
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 0
Colors:
default colormap: 0x20 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/X11/misc,/usr/share/fonts/X11/Type1,built-ins
DPMS (Energy Star):
Standby: 600 Suspend: 600 Off: 600
DPMS is Enable

So it seems to have configured itself since the xorg.conf file doesn’t exist in the etc/x11 folder and it’s auto setting at startup.
I really like the Mate desktop, so I was thinking about re-installing Mate or maybe installing Cinnamon alongside just to test if xorg configs itself differently.

Any suggestions? thanks

btw. I haven’t tried installing the xscreensaver yet. Just weighing the options before messing things up more

Источник

Оцените статью