Display unclaimed linux mint

После обновления ядра вместо рабочего стола синий экран

Доброго времени суток! Одолела проблема следующего характера: После обновления Ubuntu до версии 3.2.0-67-generic-pae попросил ноутбук перезагрузки. После перезагрузки после ввода пароля учетной записи появляется только синий экран, но мышка реагирует на движения и когда включаю Wifi слева появляется информационное всплывающее окошко о статусе подключено/отключено. Больше на рабочем столе ничего не отображается. При попытке вызвать терминал с помощью клавиатуры — ничего не отображается. Что это такое и как это победить? Очень нужна помощь.

очевидно, что Unity что-то не нравится. На виртуальные терминалы переключается? ctrl-f2
И наверное тебе сюда: Сегодня моя Юнити перестала загружатся.

На виртуальные терминалы не переключается. В теме сброшенной ссылки, как я поняла терминал все-таки отображается, а у меня нет.

Видео драйвер переставить? И по клавише Ctrl-Alt-F1 попробуйте.

Тогда нужно попробовать загрузиться в init 3 и смотреть логи.
Чтобы загрузиться в init 3 нужно в меню grub выбрать пункт убунты и нажать E, затем в конце строки начинающейся с linux дописать init=/sbin/init 3
P.S. не уверен, что сработает на убунте, но должно

Вошла по клавише Ctrl+Alt+f1 пробую вот это: sudo apt-get install ubuntu-desktop Надеюсь что поможет

Не поможет. Нужно копать в сторону драйверов. Кстати, какой драйвер/видеокарта?

Не могут же разрабы убунты быть такими идиотами, чтобы удалять пакеты из ubuntu-desktop во время обновления ядра!

Видеокарта nvidia Geforce 610M 1 Gb

Вот блин — стало ещё хуже. После ввода пароля учетки картинка зависает и больше ничего не происходит, но курсор мыши двигается.

*-display UNCLAIMED описание: VGA compatible controller продукт: GF119M [GeForse 610M] производительность:NVIDIA Corporation физический ID: 0 сведения о шине:pci@0000:01:00.0 версия:a1 разрядность:64 bits частота: 33MHz возможности:pm msi pciexpress vga_controller cap_list конфигурация:latency=0 ресурсы: память: f6000000-f6ffffff память: e0000000-e7ffffff память: e8000000-e9ffffff ioport:e000(размер=128) память: f7000000-f707ffff *-display описание: VGA compatible controller продукт: 2nd Generation Core Processor Family Integrated Graphics Controller производительность:Intel Corporation физический ID: 2 сведения о шине:pci@0000:00:02.0 версия:09 разрядность:64 bits частота: 33MHz возможности:msi pm vga_controller bus_master cap_list rom конфигурация: driver=i915 latency=0 ресурсы: IRQ:45 память: f7400000-f77fffff память: d0000000-dfffffff ioport:F000(размер=64)

Источник

Thread: Unclaimed Display

Thread Tools

Display

Unclaimed Display

when I ran lshw I got this

description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 1015MiB
*-cpu
product: Intel(R) Celeron(R) CPU 1.70GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 15.1.3
size: 1700MHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts
configuration:/> *-cache
description: L1 cache
physical id: 0
size: 8KiB
*-pci
description: Host bridge
product: 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 01
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel
resources: irq:0 memory:ec000000-efffffff(prefetchable)
*-display UNCLAIMED
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
resources: memory:f0000000-f7ffffff(prefetchable) memory:e8000000-e807ffff
*-usb:0
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:1800(size=32)
*-usb:1
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:1820(size=32)
*-usb:2
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:1840(size=32)
*-usb:3
description: USB Controller
product: 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:23 memory:e8080000-e80803ff
*-pci
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 81
width: 32 bits
clock: 33MHz
capabilities: pci bus_master
resources: ioport:2000(size=4096) memory:e8100000-e81fffff
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 2
bus info: pci@0000:02:02.0
logical name: eth0
version: 10
serial: 00:40:2b:3f:54:51
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=8139too driverversion=0.9.28 ip=192.168.1.67 latency=64 maxlatency=64 mingnt=32 multicast=yes
resources: irq:17 ioport:2000(size=256) memory:e8100000-e81000ff
*-isa
description: ISA bridge
product: 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide
description: IDE interface
product: 82801DB (ICH4) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=ata_piix latency=0
resources: irq:18 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1860(size=16) memory:40000000-400003ff
*-serial UNCLAIMED
description: SMBus
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 01
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: ioport:1880(size=32)
*-multimedia
description: Multimedia audio controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC’97 Audio Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=Intel ICH latency=0
resources: irq:17 ioport:1c00(size=256) ioport:18c0(size=64) memory:e8080c00-e8080dff memory:e8080800-e80808ff
*-scsi
physical id: 1
bus info: scsi@2
logical name: scsi2
capabilities: scsi-host
configuration: driver=usb-storage

While browsing online my screen will just go blank (no matter what browser I use) Well when I looked the problem up online there were a couple of people with the same issue and with unclaimed displays.

I looked at the driver page for intel they listed my chipset as compatible. How do I fix this?

Re: Unclaimed Display

check that your driver is activated: system admin hardware driver

sudo apt-get update
sudo apt-get install -f
sudo dpkg —configure -a

look for errors logged into:
— .xsession-errors (/home, ctrl+h to unhide)
— system admin logviewer

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

Display UNCLAIMED. How can i use my graphics card ?

Display UNCLAIMED. How can i use my graphics card ?

Post by tsushi » Wed Jun 03, 2015 9:45 pm

I just installed Linux Mint 17.1 with Cinnamon and I’m having problems. I got a Lenovo y50 laptop with a GTX 860M graphics card but, it seems like some integrated graphics is running the show.
I already reinstalled Mint because i tried installing nvidia drivers earlier and everything went to hell. I really need some help on what to do now without messing it up again.

*-display UNCLAIMED
description: 3D controller
product: GM107M [GeForce GTX 860M]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:4000(size=128) memory:b2000000-b207ffff
*-display
description: VGA compatible controller
product: 4th Gen Core Processor Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 06
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:47 memory:d1000000-d13fffff memory:c0000000-cfffffff ioport:5000(size=64)

Thanks !

Re: Display UNCLAIMED. How can i use my graphics card ?

Post by viodragos » Thu Jun 25, 2015 4:52 pm

Re: Display UNCLAIMED. How can i use my graphics card ?

Post by Pjotr » Thu Jun 25, 2015 5:56 pm

Источник

Thread: *-network UNCLAIMED — so how do I ‘claim’ it?

Thread Tools

Display

*-network UNCLAIMED — so how do I ‘claim’ it?

I’ve just put Jaunty on a Toshiba NB200 netbook. Got all 9.04 updates using a 3G dongle (so that works!).

I am trying to install a Netgear 3G Broadband Wireless Router. I’m pretty sure that I’ve set it up correctly as I can access the web (wirelessly) from my Windows laptop, as I’m using it now.

I can connect to the web using my 3G mobile broadband dongle directly connected. My problem — I just can’t figure out how to configure things for wireless in Jaunty!

I know the wifi wasn’t disabled in Windows (apparently, that would mean it could never be enabled in Linux) and I have downloaded the ‘backports’ for Jaunty (which is supposed to help) — but I still cannot find any wireless networks available.

told me that the network controller is an Atheros AR9285.

Now, I’m afraid that I have no idea what that means, but I’m guessing that ‘unclaimed’ may mean something — how do I ‘claim’ it?. I’m fully aware that this is due to my short-comings and not Ubunto. What is that ‘stupid something’ that I either have or haven’t done? Please, point me on my way to a suitable tutorial.

Re: *-network UNCLAIMED — so how do I ‘claim’ it?

‘Unclaimed’ typically means no driver has attached to it. If you have an internet connection by ethernet, I suggest you open a terminal and do:

Reboot and you should be good to go.

Re: *-network UNCLAIMED — so how do I ‘claim’ it?

What it means that there’s no driver claiming it and thus it’s not going to work until one does. For your card, you’ll need the ath9k driver. And if you installed the backports, then you should indeed have the latest version available.

Try opening up a terminal and running lsmod | grep ath, if the output is empty, it means there are no modules with «ath» in them loaded. If it does show some, then run sudo modprobe -r for each possibility (ath_pci, ath5k & ath9k — the rest depend on these and get unloaded as the driver module is unloaded). Afterwards run sudo modprobe ath9k to load the ath9k and then try lshw again to see if it gets associated this time.

Re: *-network UNCLAIMED — so how do I ‘claim’ it?

I’d downloaded the backports, but I hadn’t rebooted! What an old fool!

Re: *-network UNCLAIMED — so how do I ‘claim’ it?

What it means that there’s no driver claiming it and thus it’s not going to work until one does. For your card, you’ll need the ath9k driver. And if you installed the backports, then you should indeed have the latest version available.

Try opening up a terminal and running lsmod | grep ath, if the output is empty, it means there are no modules with «ath» in them loaded. If it does show some, then run sudo modprobe -r for each possibility (ath_pci, ath5k & ath9k — the rest depend on these and get unloaded as the driver module is unloaded). Afterwards run sudo modprobe ath9k to load the ath9k and then try lshw again to see if it gets associated this time.

I got this error after I tried to use a Ndiswrapper driver. then the network goes unclaimed.

When I loaded the modprobe, the network became «claimed».

Источник

ubuntu 18.04 intel graphic 9b41 unclaimed, external hdmi display doesn’t work

I got an HP laptop envy x360 core i7 10th gen. I installed and upgraded ubuntu 18.04 on it (latest). I installed lightdm and mate (but I guess this is not relevant in the problem)

The builtin display, though ‘working’ seems not ‘claimed’, as reported by lshw, dunno if this is a problem.

My real problem is that plugin an external hdmi display (samsung 4k) do nothing, dmesg shows no kenel activity, no plugin plugout is detected.

I have another ‘older’ hp envy x360 with core i7 8th gen, and this one works properly, allowing comparison if needed.

The older envy360 lspci shows

The faulting newer x360 shows

So it sounds like the intel graphic interface differ, and I don’t know how to handle this.

The lshw excerp for the older (good) x360 shows

and the faulty one

I wonder if I need to load some intel drivers for this newer envy x360.

Thanx in advance for any pointers.

2 Answers 2

Well the 18.04 .iso I installed ‘may be’ was not the pure latest, so despite the update/upgrade, the newer machine graphic was not Ok.

I then download the very latest 18.04 .iso and there, from the .iso usb stick, even before install the dual display did work, and so did it after install, I then installed MATE, which chocked a bit, but after a couple of resolution adjust of the external display finally end up to work.

So I guess the answer is, do install the very latest ubuntu on the very latest HW 🙁

Face not so red 🙂

Well I got a ‘working’ config after re-installing latest 18.04 Ubuntu, BUT, it was pure luck, after a couple a reboot I lost the external 4K HDMI display.

BTW the display is a SAMSUMG4K UHD curve with 3840×2160 def.

Basically what happen is that randomly plugin this display into the HP envy x3600 was working or not.

Not working mean the display showing ‘HDMI’ (as a source, there is also an DP source possible), then was flickering black/dark grey, never displaying my desktop, the internal display also going a bit crazy.

I suspected all sort of HW problem, I crossed out the SAMSUNG display along with its HDMI cable, as plugin this as is in a second DESKTOP was always working, so display + cable ok.

The the HP envy external HDMI connector is kinda at fault, or the Ubuntu driver.

And finally I got a workaroud, a little all-in-one USB type C hub, with a lan, 3 USB3, sd card reader AND HDMI 4K connector (in the magnitude of $30)

I hooked this hub (kinda docking), and plugged the HDMI cable in the hub instead in the HP connector and bingo, the external display always shows up correctly, we can as well plug and play the HDMI cable, X11 always reliably fallback in the mono display mode, with primary display reassigned correctly, then replug trig a correct dual display.

Now all is back to norm, why the hp envy/ubuntu is not able to handle the external display stay a mistery, but I can travel with the little usb hub as an acceptable workaround.

Источник