Распаковываем скачанный предварительно драйвер видеокамеры в новую папку на винчестер компьютера.
Подключаем видеокамеру к USB-разъему компьютера.
При подключении камеры компьютер сообщит, что найдено новое устройство и потребует установить для него драйвер

Выбираем «Установка из указанного места» и «Далее».
После этого появится «окно» поиска драйвера, в котором необходимо выбрать «Выполнить поиск наиболее подходящего драйвера. » и указать путь к папке,
в которой находится предварительно распакованный драйвер видеокамеры.

Если путь указан верно, то появится следующее окно, отображающее процесс установки драйвера

В процессе установки появится небольшое окно с предупрежденим (необходимо нажать «Ok» для продолжения установки)

Для завершения установки драйвера необходимо завершить настройку самой видеокамеры — нажать «Yes» в следующем окне

PS4EyeCam: PS4 Camera PC Driver by BigBoss for PS4 Dual Eye Arrives

PSXHAX

Following up on the PlayStation 4 Eye / PS4 Camera Teardown and PS4Eye: PS4 Eye Camera Tools and PlayStation 4 USB Comm Dump, today PlayStation 4 developer bigboss made available PS4EyeCam (aka OrbisEyeCam) which is a PS4 Camera PC driver for the PS4 Dual Eye.

To quote: PS4EYECam released

I had released the first public version of PS4EYECam driver. You can get full information in my PS4EYECam repository.

It is the first public driver for PlayStation 4 Camera licensed under gpl. I have free afternoons available if someone is interested to offer me a partial job

Enjoy and remember the best is yet to come.

What is PS4EYECam?

• PS4EYECam is a Sony PlayStation 4 Camera driver implementation reference.
• The driver is using libusb (github.com/libusb/libusb) to handle USB communications.
• Part of code was based on PS3EYEDriver (github.com/inspirit/PS3EYEDriver).
• Payload parsing stuff parts from Linux kernel source (gspca).
• UVC video control from libuvc (github.com/ktossell/libuvc).
• Boot and initialization from dumped PlayStation 4 Camera firmware ps4eye (github.com/ps4eye/ps4eye).
• Other parts and research based on my experience adding support for different usb devices for Sony PlayStation 2 and Sony PlayStation 3 consoles (ps2eyetoy.irx, ps2mic.irx, ps3kinect.sprx, etc).

About PlayStation 4 Camera device

PlayStation 4 Camera has a Sony propietary connector called AUX, it is an USB 3 connector without USB 2 differential data pair (d+ and d-). If you want to use it on other platform different than PlayStation 4 console you must adapt wire and connector to USB 3.

PS4EYECam is a USB 3 device and it is using libusb so it can be ported to all platforms supported by libusb and with USB 3 controllers.

Implementation reference was done in OSX Mavericks and i only tested it on this platform.

A sample PS4EYECapture with PS4EYECam tested on OSX Maverick is included using:

• libcinder (github.com/cinder/Cinder).
• ciUI (github.com/bigboss-ps3dev/ciUI) With little modification to use in Mavericks environment.
• opencv-cinder (github.com/cinder/Cinder-OpenCV) For future use.

Sample output with Cinder in OSX Mavericks. You will need a few things installed before:

• xcode
• macport or similar
• libusb (with macport is installed in /local/opt/lib)

• Compile and install libcinder (github.com/cinder/Cinder) follow gitsetup (libcinder.org/docs/welcome/GitSetup.html).
• Install ciUI and Cinder-OpenCV blocks

• Use TinderBox-Mac tool to create a PS4EYECapture project /[YOUR_OWN_PATH]/cinder_master/tools/TinderBox-Mac

1) Choose project name PS4EYECapture , path and choose cinder_master or your repository name and choose next_

2) Choose ciUI block and option copy

3) Choose OpenCV block and option relative

4) Choose finish and project is created choose xcode project file and open it

5) Clone PS4EYECam repository

6) Copy driver/src/*.cpp to your PS4EYECapture/src

7) Copy cinder/src/*.cpp to your PS4EYECapture/src

8) Copy driver/include/*.h to your PS4EYECapture/include

9) Copy cinder/resources/firmware.bin to your PS4EYECapture/resources

10) Copy /opt/local/inclide/libusb-1.0/libusb.h to your PS4EYECapture/include

11) Copy /opt/local/lib/libusb-1.0.0.dylib to your cinder_master/lib/macosx/

12) Incorporate cpp files from driver/src and cinder/src on src, firmware.bin to resources headers files to include and libusb lib.

13) Ready to compile and run

TODO LIST

• Identify uknown1, unknown2 and unknown3 formats
• Identify correct format to depth frame. Sample only use threshold values to display results in rgb
• Port driver to other platforms (Linux , Windows, . )
• Cinder is only supported by OSX and windows. An openframework sample can be done easily and it is multiplatform
• Fix, improve, incorporate new features
• If someone has ov580 datasheet contact (twitter @psxdev) with me please

And from the README.md: OrbisEyeCam

What does this do?

How do I use it?

1. Install Usb Boot device driver using InstallDriver.exe from bin directory

2. Upload firmware, i included last firmware from 6.50 with md5 24afe3c941dc599aafd23ac5170a4d14 check https://psxdev.github.io/luke.html

3. Usb Camera-OV580 ready to use with Windows Media Framework