Использование Apple Software Update для устранения проблем с Wi-Fi в Boot Camp

Если при использовании Windows 10 с помощью Boot Camp на компьютере MacBook Pro модели 2016 г. возникают проблемы с подключением к Wi-Fi, воспользуйтесь Apple Software Update для получения последних версий драйверов.

Если не удается подключиться к сети Wi-Fi, откройте программу Apple Software Update в Windows и установите все доступные обновления.

Если в ОС Windows не удается подключиться к Интернету через проводное подключение, загрузите компьютер в ОС macOS и выполните следующие действия:

1. Подключите к компьютеру Mac внешнее устройство, такое как флэш-накопитель USB, отформатированный для Windows.
2. Запустите программу «Ассистент Boot Camp». Она находится в подпапке «Утилиты» папки «Программы».
3. Выберите «Действие» > «Загрузить ПО поддержки Windows».
4. Выберите в качестве места для сохранения ПО внешнее устройство.
5. Загрузите компьютер Mac в ОС Windows и установите обновление с внешнего устройства.

Информация о продуктах, произведенных не компанией Apple, или о независимых веб-сайтах, неподконтрольных и не тестируемых компанией Apple, не носит рекомендательного или одобрительного характера. Компания Apple не несет никакой ответственности за выбор, функциональность и использование веб-сайтов или продукции сторонних производителей. Компания Apple также не несет ответственности за точность или достоверность данных, размещенных на веб-сайтах сторонних производителей. Обратитесь к поставщику за дополнительной информацией.

Download and install Windows support software on your Mac

After using Boot Camp Assistant to install or upgrade Microsoft Windows on your Mac, you might also need to install the latest Windows support software (drivers) from Apple.

When you install Microsoft Windows on your Mac, Boot Camp Assistant automatically opens the Boot Camp installer, which installs the latest Windows support software (drivers). If that doesn’t happen, or you experience any of the following issues while using Windows on your Mac, follow the steps in this article.

• Your Apple mouse, trackpad, or keyboard isn’t working in Windows.
  Force Touch isn’t designed to work in Windows.
• You don’t hear audio from the built-in speakers of your Mac in Windows.
• The built-in microphone or camera of your Mac isn’t recognized in Windows.
• One or more screen resolutions are unavailable for your display in Windows.
• You can’t adjust the brightness of your built-in display in Windows.
• You have issues with Bluetooth or Wi-Fi in Windows.
• You get an alert that Apple Software Update has stopped working.
• You get a message that your PC has a driver or service that isn’t ready for this version of Windows.
• Your Mac starts up to a black or blue screen after you install Windows.

If your Mac has an AMD video card and is having graphics issues in Windows, you might need to update your AMD graphics drivers instead.

Install the latest macOS updates

Before proceeding, install the latest macOS updates, which can include updates to Boot Camp.

Format a USB flash drive

To install the latest Windows support software, you need a 16GB or larger USB flash drive formatted as MS-DOS (FAT).

1. Start your Mac from macOS.
2. Plug the USB flash drive into your Mac.
3. Open Disk Utility, which is in the Utilities folder of your Applications folder.
4. Choose View > Show All Devices from the menu bar.
5. From the sidebar in Disk Utility, select your USB flash drive. (Select the drive name, not the volume name beneath it.)
   
6. Click the Erase button or tab.
7. Choose MS-DOS (FAT) as the format and Master Boot Record as the scheme.
8. Click Erase to format the drive. When done, quit Disk Utility.

Download the Windows support software

1. Make sure that your Mac is connected to the Internet.
2. Open Boot Camp Assistant, which is in the Utilities folder of your Applications folder.
3. From the menu bar at the top of your screen, choose Action > Download Windows Support Software, then choose your USB flash drive as the save destination. When the download completes, quit Boot Camp Assistant.
   

Install the Windows support software

After downloading the Windows support software to your flash drive, follow these steps to install the software. (If you’re attempting to resolve issues with a Bluetooth mouse or keyboard, it might be easier to use a USB mouse or keyboard until these steps are complete.)

1. Make sure that the USB flash drive is plugged into your Mac.
2. Start up your Mac in Windows.
3. From File Explorer, open the USB flash drive, then open Setup or setup.exe, which is in the WindowsSupport folder or BootCamp folder. When you’re asked to allow Boot Camp to make changes to your device, click Yes.
4. Click Repair to begin installation. If you get an alert that the software hasn’t passed Windows Logo testing, click Continue Anyway.
5. After installation completes, click Finish, then click Yes when you’re asked to restart your Mac.

Learn more

If you can’t download or save the Windows support software:

• If the assistant says that the Windows support software could not be saved to the selected drive, or that the USB flash drive can’t be used, make sure that your USB flash drive has a storage capacity of at least 16GB and is formatted correctly.
• If the assistant doesn’t see your USB flash drive, click Go Back and make sure that the drive is connected directly to the USB port on your Mac—not to a display, hub, or keyboard. Disconnect and reconnect the drive, then click Continue.
• If the assistant says that it can’t download the software because of a network problem, make sure that your Mac is connected to the Internet.
• Make sure that your Mac meets the system requirements to install Windows using Boot Camp.

If a Mac feature still doesn’t work after updating the Windows support software, search for your symptom on the Apple support website or Microsoft support website. Some features of your Mac aren’t designed to work in Windows.

Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Contact the vendor for additional information.

WiFI does not work on Windows 10 BootCamp — Drops in and out

Update: There was a new driver released on 4/20/2018 for Broadcom 802.11ac Network Adapter, version 7.35.118.83, but the Apple update is only now pushing it (7/9/2018). Just installed it. Let’s see how it goes.

WiFi is consistently dropping at random times regardless of network.

Question : how do I fix it so I have a reliable consistent wifi connection when I use Windows 10?

I have a MacBook Pro, purchased late 2017.

WiFi will randomly disconnect when I run Windows 10. It works better on certain networks than others but it’s always intermittent. Even on very robust networks it will eventually begin to drop. Once it drops it sometimes will simply not reconnect. Other times the drivers will randomly be disabled, not sure if this has to do with windows updates.

I tried manually installing and uninstalling drivers, rolling back drivers, installing and reinstalling the windows support software, and even using third party driver support software. Wifi connection still drops randomly with no perceivable pattern.

I went to the apple store and I was simply told that this is a windows issue. I had windows running on a MacBook air (2010) and never experienced these issues. It also seems they haven’t come up with an update for the driver in almost two years. I ran out of ideas, any pointers on how to fix the wifi connection problem is appreciated.

Description: Broadcom 802.11ac Network Adapter