Зарегистрирован: 23.07.2009
Пользователь #: 80,235
Сообщения: 5

Зарегистрирован: 22.03.2009
Пользователь #: 77,366
Сообщения: 297

Голоса: 1

Зарегистрирован: 23.07.2009
Пользователь #: 80,235
Сообщения: 5

Зарегистрирован: 24.06.2009
Пользователь #: 79,698
Сообщения: 69

Зарегистрирован: 27.12.2008
Пользователь #: 74,890
Сообщения: 132

Зарегистрирован: 23.07.2009
Пользователь #: 80,235
Сообщения: 5

PerfLib and Loadperf errors, HELP please?

Replies (10) 

I can imagine the inconvenience you are experiencing and will certainly help you in the right direction to fix the issue. However, I would appreciate if you could answer a few questions to narrow down the issue in order to provide you with better assistance.

1. Which web browser you are using?
2. Have you tried any other browser? Was the result same?
3. When you say text get formatted, is it the first time it behave like this?

As per the issue description you are getting PerfLib and Loadperf errors and event getting ID 1010, 3011. The issue could be if there is some third party conflict or some system file corruption. It could be also due to some virus/malware. So, try the steps provided below and see if it helps you to fix the issue.

Method 1

Step 1

Let’s boot the computer in Safe Mode and check if issue reappears. Safe mode is a diagnostic mode that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. The words Safe Mode appear in the corners of your monitor to identify which Windows mode you’re using. You may refer to the article mentioned below to boot the computer in safe mode.

Step 2:

If your computer works fine in safe mode, I would suggest you to perform clean boot.

Putting your system in Clean Boot state helps in identifying if any third party applications or startup items are causing the issue. You need to follow the steps from the article mentioned below to perform a Clean Boot.

How to perform a clean boot in Windows

Note : Refer «How to reset the computer to start normally after clean boot troubleshooting» to reset the computer to start as normal after troubleshooting.

Method 2

If issue still persists try I would suggest you to check the system files are they working fine or not and to check that try to run System File Checker (SFC) tool.

SFC scan will scans all protected system files and replaces incorrect versions with correct Microsoft versions.

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 8.

Press Windows key and X at the same time.

Choose Command Prompt (Admin) from the context menu.

In the command prompt, type sfc /scannow and hit Enter.

Exit command prompt.

For more information refer to this link:

Use the System File Checker tool to repair missing or corrupted system files

Method 3

I would suggest you to run security software and check if your system is affected by some viruses.

The Microsoft Safety Scanner is a free downloadable security tool that provides on-demand scanning and helps remove viruses, spyware, and other malicious software. It works with your existing antivirus software.

Note: The Microsoft Safety Scanner expires 10 days after being downloaded. To rerun a scan with the latest anti-malware definitions, download and run the Microsoft Safety Scanner again.

Note: Any data files that are infected may only be cleaned by deleting the file entirely, which means there is a potential for data loss.

Hope this would help. If issue still persists post back with current status of your computer and result of the proposed suggestion, we will be happy to assist you.

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Hello Ramesh Kumar, thank you for your kind reply. I was using Chrome and this site is the first instance where I encountered this problem. Now I will try to post this message with Firefox, and see what happens.

Let me explain from the beginning: The main issue was that, while I work, sometimes the disk usage will burst to 100% without any apparent reason. That’s why I’ve been looking often at the Event Viewer in search of some clue.
I used to get Events 1010, 3011 and 3012 everyday (please note that I don’t know if they are related to the issue of the disk usage), so I got curious and looked for a solution on the internet, I found in many sites this command lodcrt /r, and I tried to run it yesterday. After that I don’t get the previous events anymore, now I’m getting new Events: right when I used the command, I got 3009 and 2007 for all the names I listed: WSearchIdxPi, usbhub, UGTHRSVC, UGatherer, RemoteAccess. (I guess it means that the counters didn’t load properly for those services). Today I got 1008, 1010, 2001 (and also these: 906, 37, 1530 probably not strictly related to this issue but still).
(As I said, before using the command lodcrt /r I have backupped the registry and created a restore point, so if you think I messed up, I could try to go back.)

I will try to perform a safe mode boot when I have enough free time, however I have a feeling it won’t be very useful: the events I mentioned don’t appear at boot, it might take even one-two hours of work, so unless I work all day in safe mode (which is not possible as far as I know) it would be almost impossible to encounter them in safe mode anyway.
I *don’t think* I have virus or malware, but something must be corrupted. I could try to run the System File Checker, but will it endanger in any way my files and programs? It’s very important to me to be able to work on this computer and that all my files and programs remain intact.

The First Dword In Data Section Is The Windows Error

We have collected for you the most relevant information on The First Dword In Data Section Is The Windows Error, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered The First Dword In Data Section Is The Windows Error before you, so use the ready-made solutions.

The first four bytes (DWORD) of the Data section contains .

https://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/the-first-four-bytes-dword-of-the-data-section/c91fe17f-a8ed-4cea-a9ad-7b7432b4c29b

Sep 04, 2014 · The first four bytes (DWORD) of the Data section contains the Windows error code. The Open Procedure for service «BITS» in DLL «C:\Windows\System32\bitsperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of …

Windows cannot load extensible counter DLL MSSQLSERVER .

https://www.sqlservercentral.com/forums/topic/windows-cannot-load-extensible-counter-dll-mssqlserver-the-first-dword-in-data-section-is-the-windows-error-code

Mar 12, 2009 · Windows cannot load extensible counter DLL SQLSERVERAGENT, the first DWORD in data section is the Windows error code.

On booting, I get the following errors, please help.

https://social.technet.microsoft.com/forums/windows/en-US/1b7cb94a-a185-47f7-a677-1376930718a1/on-booting-i-get-the-following-errors-please-help

Dec 20, 2008 · The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance registry is the first DWORD in the Data section, LastCounter value is the second DWORD in the Data section, and LastHelp value is the third DWORD in the Data section.

Event 2017 -PerfOS — Windows Server — Spiceworks

https://community.spiceworks.com/topic/1163346-event-2017-perfos

Oct 07, 2016 · Unable to collect NUMA physical memory utilization data. The first four bytes (DWORD) of the Data section contains the status code.

[RESOLVED] The Open Procedure for service XXX in DLL «C .

https://www.admin-enclave.com/en/articles/windows/306-resolved-the-open-procedure-for-service-bits-in-dll-c-windows-system32-bitsperf-dll-failed-performance-data-for-this-service-will-not-be-available-the-first-four-bytes-dword-of-the-data-section-contains-the-error-code.html

The Open Procedure for service «BITS» in DLL «C:\Windows\System32\bitsperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of …

Event ID 1023: “Windows cannot load extensible counter DLL .

https://www.mstechblogs.com/paul/event-id-1023-windows-cannot-load-extensible-counter-dll-msscntrs

Apr 08, 2008 · Windows cannot load extensible counter DLL UGTHRSVC, the first DWORD in data section is the Windows error code. Windows cannot load extensible counter DLL MSSCNTRS, the first DWORD in data section is the Windows error code. If I drill into the details of one of those messages, I get this:

Event ID: 1008 / Source: Microsoft-Windows-Perflib .

https://community.spiceworks.com/topic/1902509-event-id-1008-source-microsoft-windows-perflib

Sep 10, 2020 · The customer is having Windows 10 Enterprise Anniversary update (10.0.14393 Build 14393) and Server 2012 R2 (Domain level 2003). Log Name: Application Source: Microsoft-Windows …

Event 1023 Windows cannot load the extensible coun. — VOX

https://vox.veritas.com/t5/Backup-Exec/Event-1023-Windows-cannot-load-the-extensible-counter-DLL-Backup/td-p/724877

Apr 24, 2015 · Windows cannot load the extensible counter DLL Backup Exec. The first four bytes (DWORD) of the Data section contains the Windows error code.

Windows cannot load extensible counter DLL SQLSERVERAGENT

https://social.msdn.microsoft.com/forums/sqlserver/en-US/4680005f-18a6-4bbc-b357-424835cd2ab5/windows-cannot-load-extensible-counter-dll-sqlserveragent

Jul 25, 2013 · Windows cannot load extensible counter DLL SQLSERVERAGENT, the first DWORD in data section is the Windows error code. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Windows Server — PerfNet event 2004 — Server Fault

https://serverfault.com/questions/650199/windows-server-perfnet-event-2004

Server performance data will not be returned. The error code returned is in the first DWORD in the Data section. At the command prompt, type Net Statistics to check if services are available and if Statistics are available. To see statistics from Server service type in command prompt Net Statistics Server

The First Dword In Data Section Is The Windows Error Fixes & Solutions

We are confident that the above descriptions of The First Dword In Data Section Is The Windows Error and how to fix it will be useful to you. If you have another solution to The First Dword In Data Section Is The Windows Error or some notes on the existing ways to solve it, then please drop us an email.

Вам также может понравиться

Windows или Linux: Что лучше выбрать?

Есть много причин выбирать между Windows и Linux, но

Файл владелец изменить linux

Команда Chown в Linux Chown Command in Linux (File

Установка шлюза по умолчанию linux

Настройка сети вручную Содержание Краткое описание

Чем разбить диск для linux

ИТ База знаний Курс по Asterisk Полезно — Узнать IP —