Fixing Error Reporting Service Keeps Restarting

Windows Error Reporting is an error reporting technology that collects and provides information to send debugging information (a snapshot) to Microsoft on the Internet after an error or to define the response on a user’s desktop. It helps Microsoft and its Microsoft partners diagnose problems with the software you use and provide solutions.

The default boot type for Windows Error Reporting Service is Manual. It starts when application errors, kernel errors, non-reactive applications and other application-specific problems occur. Two minutes after starting the service, it stops automatically. As a result, a possible cause is that some applications on the server crash.

Launch the System File Checker (SFC.exe)

To do this, click Start, type Command Prompt or cmd in the search box, right-click Command Prompt, and then click Run as Administrator. If you are prompted to enter an administrator password or confirmation, type the password or click Allow.

1. If you are using Windows 10, Windows 8.1 or Windows 8, first run the DISM (Inbox Deployment Image Servicing and Management) tool before launching System File Checker. (If you are using Windows 7 or Windows Vista, proceed to step 3.)
2. Type the following command, then press Enter. It may take several minutes for the command operation to end.

DISM.exe /Online /Cleanup-image /Restorehealth

Important : When you execute this command, DISM uses Windows Update to provide the necessary files to troubleshoot errors. However, if your Windows Update client is already down, use a running Windows installation as a repair source or a Windows folder side by side from a network share or removable disk, such as the Windows DVD, as the source for the files. To do this, execute the following command instead:

April 2021 Update:

We now recommend using this tool for your error. Additionally, this tool fixes common computer errors, protects you against file loss, malware, hardware failures and optimizes your PC for maximum performance. You can fix your PC problems quickly and prevent others from happening with this software:

• Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
• Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
• Step 3 : Click “Repair All” to fix all issues.

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

Note: Replace the C:\RepairSource\Windows wildcard character with the location of your repair source. For more information on using the DISM tool to repair Windows, see Repairing a Windows Image.

At the command prompt, type the following command, then press ENTER :

Use the Event Viewer to find the error.

Event logs have been an integral part of Windows since 1993. The operating system and applications use this logging service to report system events, for example, when applications fail to perform a particular action or start a particular Windows component. The Event Observer logs are divided into three types: Security, application and system; these elements are quite explicit.

The Event Viewer is therefore a powerful tool that can help you determine why Windows keeps restarting. The Event Viewer logging process is very detailed and provides you with information about specific applications or files that have been viewed during a given period of time. As this is a fatal error, you should pay particular attention to the Error and Critical Protocol types.

Disabling the error reporting service

If the error reporting service on your PC continues to restart, you may be able to solve the problem by simply disabling the service itself. This is relatively easy to do, and you can do it by following these steps:

1. Press Windows + R to open the Run dialog box. Now type services.msc and press Enter or click OK.
2. Locate the Windows Error Reporting Service in the list and double-click on it to open its properties.
3. When the Properties window opens, set the startup type to Disabled and click Apply and OK. When the service is running, you must click the Stop button to disable it.

CCNA, Web Developer, PC Troubleshooter

I am a computer enthusiast and a practicing IT Professional. I have years of experience behind me in computer programming, hardware troubleshooting and repair. I specialise in Web Development and Database Design. I also have a CCNA certification for Network Design and Troubleshooting.

Служба Windows Error Reporting и очистка каталога WER\ReportQueue в Windows

Служба WER (Windows Error Reporting) служит для сбора и отправки отладочной информации о падении системных и сторонних приложений в Windows на сервера Microsoft. По задумке Microsoft, эта информация должна анализироваться и при наличии решения, вариант исправления проблемы должен отправляется пользователю через Windows Error Reporting Response. Но по факту мало кто пользуется этим функционалом, хотя Microsoft настойчиво оставляет службу сбора ошибок WER включенной по умолчанию во всех последних версиях Windows. В большинстве случае о службе WER вспоминают, когда каталог C:\ProgramData\Microsoft\Windows\WER\ReportQueue\ начинает занимать на системном диске довольно много места (вплоть до нескольких десятков Гб), даже не смотря на то что на этом каталоге по умолчанию включена NTFS компрессия.

Служба Windows Error Reporting

Служба Windows Error Reporting представляет собой отдельный сервис Windows, который можно легко отключить командой:

net stop WerSvc

Внутри каталога WER\ReportQueue\ содержится множество каталогов, с именами в формате:

• Critical_6.3.9600.18384__00000000_cab_3222bf78
• Critical_powershell.exe__cab_271e13c0
• Critical_sqlservr.exe___cab_b3a19651
• NonCritical_7.9.9600.18235___0bfcb07a
• AppCrash_cmd.exe__bda769bf_37d3b403

Как вы видите, имя каталога содержит степень критичности события и имя конкретного exe файла, который завершился аварийно. Во всех каталогах обязательно имеется файл Report.wer, который содержит описание ошибок и несколько файлов с дополнительной информацией.

Очистка папки WER\ReportQueue в Windows

Как правило, размер каждой папки незначителен, но в некоторых случаях для проблемного процесса генерируется дамп памяти, который занимает довольно много места. На скриншоте ниже видно, что размер файла дампа memory.hdmp составляет около 610 Мб. Парочка таким дампов – и на диске исчезло несколько свободных гигибайт.

Чтобы очистить все эти ошибки и журналы штатными средствами, откройте панель управления и перейдите в раздел ControlPanel -> System and Security -> Action Center -> Maintenance -> View reliability history -> View all problem reports и нажмите на кнопку Clear all problem reports.

Для быстрого освобождения места на диске от файлов отладки, сгенерированных службой WER, содержимое следующих каталогов можно безболезненно удалить и руками.

Отключение Window Error Reporting в Windows Server 2012 R2 / 2008 R2

Отключить запись информации об ошибках Windows Error Reporting в серверных редакция Windows можно следующим образом:

• Windows Server 2012 / R2 – Панель Управления -> System and Security -> Action Center -> раздел Maintenance -> Settings -> выберите опцию I don’t want to participate, and don’t ask me again
• Windows Server 2008 R2 – откройте консоль Server Manager и промотайте список, перейдя в раздел Resources and Support. Нажмите на Turn Off Windows Error Reporting и выберите пункт I don’t want to participate, and don’t ask me again.

Отключение функции сбора и отправки отчетов в Windows 10

В Windows 10 возможность отключить Error Reporting через GUI отсутствует. Проверить статус компонента можно в панели управления Система и безопасность ->Центр безопасности и обслуживания -> секция Обслуживание. Как вы видите, по умолчанию параметр Поиск решения для указанных в отчетах проблем включен (Control Panel -> System and Security -> Security and Maintenance -> Maintenance -> Check for solutions to problem reports).

Отключить Windows Error Reporting в Windows 10 можно через реестр. Для этого в ветке HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting нужно создать новый параметр типа DWORD (32 бита) с именем Disabled и значением 1.

Теперь еще раз проверим статус параметра Поиск решения для указанных в отчетах проблем в панели управления. Его статус должен изменится на Отключено.

Отключение Windows Error Reporting через групповые политики

Ведение журналов службой Windows Error Reporting можно отключить и через групповую политику. Она находится в разделе Computer Configuration/Administrative Templates/Windows Components/Windows Error Reporting (Компоненты Windows -> Отчеты об ошибках Windows). Для отключения сбора и отправки данных включите политику Disable Windows Error Reporting (Отключить отчеты об ошибках Windows).

В результате сообщения об ошибках приложений в Windows перестанут формироваться и автоматически отправляться в Microsoft.

How to enable or disable Windows 10 Error Reporting Service

The Windows 10 error reporting service is designed to help ensure your PC works optimally. The central idea behind Windows Error Report (WER) is to keep Microsoft informed about user issues working with Windows.

However, every Windows OS version has the service enabled on default settings. But an individual user can choose to disable if the need arises. This article explores how to enable or disable the error reporting service on Windows 10.

How the Windows 10 Error Reporting Service Works and Why

Windows 10 Error Report focuses on discovering hardware and software issues from the user’s PC and report to Microsoft. With a database of likely complaints experienced with using the Windows 10, Microsoft can then send solutions for troubleshooting.

While working with the PC, some users experience pop-ups or alerts requesting the submission of the problem report. Windows error report usually occurs after a system failure, program crashes, refused to load properly or operating system errors. Windows usually prompt the user to submit an error report online to help proffer solutions in the future. The problem report may include program name, date, time of error and version.

Should I disable the Windows error reporting service?

Windows users often disable error reporting due to disk space or privacy issues but might need to exercise restraint. Error reporting service for Windows 10 offers dual benefits to Microsoft and the PC users.

Each error report helps Microsoft develop more advanced service packs for dealing with glitches. That means better user experience with Windows 10 based on the information gathered.

Steps to disable Window 10 Error Reporting Service

1. Use Command to disable Window 10 Error Report
2. Use the Registry Editor to disable Window 10 Error Report

Just like other versions, Windows 10 does have a slightly different graphical user interface for disabling error reports. Lower versions of Windows OS have error reporting under Action Center Setting. On Windows 10 it is the Security & Maintenance function requiring working with registries.

Method One: Use Command to disable Window 10 Error Report

It’s a simple and straightforward process. Here are the steps to follow:

1. Use the shortcut key. From the keyboard press down the Windows key+R. It should navigate to the Run dialog box.
2. Into the open space of the dialog box type service.msc.
3. Move the cursor to Windows Error Reporting Service and right-click it.
4. Locate Startup types and scroll through the drop down menu list on the right.
5. Click Disabledwhich is at the bottom of the list.
6. Click ‘OK‘ or apply to complete the action.
7. Close the service window to exit. Now the process has been completed.

• RELATED: 5 best software to fix runtime errors in Windows 10

Note:

In some cases, the Startup type which is close to disabled might appear as gray. That means the user needs admin rights to continue the process. Therefore, log out and log in as an administrator. Or locate the administrative command prompt by pressing Windows key+ X to select command prompt admin.

Method Two: Use the Registry Editor

Using the Registry Editor is another way to safely disable the Windows 10 Error Reporting Service. This second method for disabling Windows error reporting service includes tweaking the registry. But first, you need to check for error report issues:

1. Locate Control Panel from Windows startup.
2. Click Control Panel> System and Security> Security and Maintenance.
3. Look out for Report problems. Report problems should by default display ‘On’.

• RELATED: Fix Blue Screen of Death errors with these 4 software solutions

Steps to disable Windows Error Reporting Service using the Registry Editor

1. Locate the registry editor app below:
   • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting
2. To the right of your window, locate the registry key in the dialog box.
3. Click on the option ‘disabled’ so the dialog box can appear. Replace the value ‘0’ with ‘1’.
4. If there is no value then create a new one with the same name, ‘Disabled’.
5. Then set the new 32-Bit DWORD value to ‘1’.
6. Tap ‘OK’ to effect changes.

Note:

• To confirm that the Windows error reporting service has been disabled, go to Security and Maintenance. Check the comment on the report problem to see if it reads on or off.
• To re-enable error reporting service on Windows 10 simply set the disabled value back to zero. Another option would be to delete the disabled value.
• To create a new DWORD from the registry editor one needs to locate Edit > New on the menu.

It’s quite simple to disable and enable Windows 10 error reporting service anytime. And understanding how to use the Registry Editor or finder makes everything much simpler.