PATH – отобразить или изменить пути поиска исполняемых файлов.

Команда PATH используется для указания или просмотра путей поиска исполняемых файлов. Пути поиска представляют собой строки, определяющие перечень каталогов файловой системы, в которых находятся исполняемые файлы (файлы с расширением .bat, .cmd, .exe, .vbs и т.п. ), разделенные точкой с запятой ; Например, C:\windows;C:\windows\system32 — определяет пути поиска C:\windows и C:\windows\system32 . Если вы в командной строке набираете program.exe без явного указания пути, то для запуска файла program.exe выполняется его поиск в текущем каталоге, и если он не найден, то в каталоге C:\windows , если и там не найден – в каталоге C:\windows\system32 . Если же исполняемый файл будет в обоих каталогах, то выполнится запуск из того, что определен ранее — C:\windows . Значение переменной среды PATH содержит пути поиска исполняемых файлов определенный на данный момент времени.

Формат командной строки:

PATH ; — очистить путь поиска используемых файлов, ограничив его текущим каталогом.

PATH [[диск:]путь[;. ][;] — установит ь пути поиска исполняемых файлов.

Команда PATH без параметров отображает текущий путь поиска. В командную строку допускается включение переменной %PATH% , задающей прежний путь поиска.

path /? — отобразить подсказку по использованию команды.

path — отобразить пути поиска исполняемых файлов.

path %PATH%;C:\Scripts — добавить путь C:\Scripts в конец существующего списка каталогов для поиска исполняемых файлов.

path C:\scripts;%PATH% — добавить путь C:\Scripts в начало существующего списка каталогов для поиска исполняемых файлов.

При выполнении команды PATH, значение передаваемых ей параметров не анализируется и воспринимается как обычная строка символов, поэтому, например, трижды выполнив команду path C:\scripts;%PATH% вы создадите 3 записи для пути C:\Scripts . Значение переменной PATH, измененное командой действует только на момент текущего сеанса командной строки. Для постоянного изменения системных и пользовательских переменных среды, в том числе, и путей поиска, используется команда SetX . В постоянно действующих путях поиска не стоит указывать каталоги сменных носителей (дискет, CD/DVD, карты памяти и т.п.)

Set path from command line

Users can run an executable from windows command prompt either by giving the absolute path of the file or just by the executable file name. In the latter case, Windows searches for the executable in a list of folders which is configured in environment variables. These environment variables are as below.

1. System path
2. User path

The values of these variables can be checked in system properties( Run sysdm.cpl from Run or computer properties). Initially user specific path environment variable will be empty. Users can add paths of the directories having executables to this variable. Administrators can modify the system path environment variable also.

How to set path from command line?

In Vista, Windows 7 and Windows 8 we can set path from command line using ‘setx’ command.

For example, to add c:\dir1\dir2 to the path variable, we can run the below command.

Alternative way is to use Windows resource kit tools ‘pathman.exe‘. Using this command we can even remove a directory from path variable. See download windows resource kit tools. This works for Windows 7 also.

Add directory to system path environment variable:

Open administrator command prompt
Run the below command

Remove path from system path environment variable:
Run the below command from elevated command prompt

Setting user path environment variable

For user environment varlables, admin privileges are not required. We can run the below command to add a directory to user path environment variable.

To remove a directory from user path, you can run the below command.

Default option is not allowed more than ‘2’ time(s)

You get this error if you have not enclosed ‘path’ in double quotes. See the below example for setting the path of firefox.

Now if you move %path% to be in the double quotes

Could a context entry be created for folders, perhaps an extended one… to add to path?

what about a multi-verb option, like copy as path?

hi, when i use setx at an administrator command line, it creates a USER variable, NOT the SYSTEM variable. What am i doing wrong? How do i change the SYSTEM path at command prompt? -thx

Johny Why
Answer: Try add the parameter /M

Hi, is there a way I can add an extra variable instead on deleting the currently one and put a new Variable on the Path.

I used the command setx /M “c:\Options”, and what it does is delete the current one and then puts that one there, all I want is to add the new variable to the current one. -thx

Nuno, pathman described above does exactly that. You can download the resource tools kit and get it.

setx path “%path%;C:\yourFolder”

To set path for java & javac, can I add the paths to PATH or do I need to create the environment variable JAVA_HOME. I don’t have this defined, but windows does not seem to be able to find java binaries on my system.

You can directly add the folder to PATH. No need to define JAVA_HOME. However, adding JAVA_HOME separately avoids cluttering and helps to easily understand what is added.

hello, can someone plz explain this result? After setting path, it did not change. This was run from an Administrator command-line:

C:\Windows\system32>setx path “C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\ProgramData\chocolatey\bin;D:\Program Files (x86)\Microsoft VS Code\bin”

SUCCESS: Specified value was saved.

C:\Windows\system32>path
PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\ProgramData\chocolatey\bin;D:\Program Files (x86)\Microsoft VS Code\bin;D:\Program Files (x86)\metapad36;D:\Program Files (x86)\metapad36″ /M

Why won’t this work?

SET EPO = D:\Program Files (x86)\McAfee\ePolicy Orchestrator
PATH = %PATH%;%EPO%\jre\bin;%EPO%\apache2\bin

In windows 10 set path %path%; not working. it’s work like :
setx “%path%;C:\Program Files\CodeBlocks\MinGW\bin”

By unfortunately I deleted my system default path. How could I able to find my system path?

Unfortunately I deleted several files with unremembered path names. This article was useful

The following used to work for me when I am in MSDOS environment. Lately I get error messages such as INCLUDE not found. Why is this so?

Used to work
SET PLL =c:\CL5\PLL
SET PLT =c:\CL5\PLL
SET INCLUDE =c:\CL5\INCLUDE
SET PRG =c:\IMS\PRG
SET LIB =c:\CL5\LIB
SET OBJ =c:\CL5\OBJ
PATH =c:\IMS\EXE;\CL5\BIN;\CL5\NG;\CL5\PLL

pathman is one of many tools of the Windows Server 2003 Resource Kit Tools

Note: The Windows Server 2003 Resource Kit Tools are not supported on 64-bit platforms.

Huh.
When I did that on Windows 10 v1903, using setx, it replaced the USER scope paths with the SYSTEM scope paths.
Now I’m not sure what was in the old user path.
So, uh… Be careful out there.
And if anyone has a solution how to avoid that, please let me know
Thanks

Windows CMD: PATH Variable – Add To PATH – Echo PATH

PATH is an environment variable that specifies a set of directories, separated with semicolons ( ; ), where executable programs are located.

In this note i am showing how to print the contents of Windows PATH environment variable from the Windows command prompt.

I am also showing how to add a directory to Windows PATH permanently or for the current session only.

Cool Tip: List environment variables in Windows! Read More →

Echo Windows PATH Variable

Print the contents of the Windows PATH variable from cmd :

The above commands return all directories in Windows PATH environment variable on a single line separated with semicolons ( ; ) that is not very readable.

To print each entry of Windows PATH variable on a new line, execute:

Cool Tip: Set environment variables in Windows! Read More →

Add To Windows PATH

Warning! This solution may be destructive as Windows truncates PATH to 1024 characters. Make a backup of PATH before any modifications.

Save the contents of the Windows PATH environment variable to C:\path-backup.txt file:

Set Windows PATH For The Current Session

Set Windows PATH variable for the current session:

Set Windows PATH Permanently

Run as Administrator: The setx command is only available starting from Windows 7 and requires elevated command prompt.

Permanently add a directory to the user PATH variable:

Permanently add a directory to the system PATH variable (for all users):

Info: To see the changes after running setx – open a new command prompt.

How to get folder path from file path with CMD

I need path to the folder that contains cmd file. With %0 I can get file name. But how to get folder name?

P.S. My current directory != folder of the script.

7 Answers 7

For the folder name and drive, you can use:

You can get a lot more information using different modifiers:

This is a copy paste from the «for /?» command on the prompt. Hope it helps.

Related

The accepted answer is helpful, but it isn’t immediately obvious how to retrieve a filename from a path if you are NOT using passed in values. I was able to work this out from this thread, but in case others aren’t so lucky, here is how it is done:

Now the :file_name_from_path function can be used anywhere to retrieve the value, not just for passed in arguments. This can be extremely helpful if the arguments can be passed into the file in an indeterminate order or the path isn’t passed into the file at all.

dp1 for drive and path only. – Andrew Oct 28 ’17 at 1:36

In order to assign these to variables, be sure not to add spaces in front or after the equals sign:

Then you should have no issues.

In case anyone wants an alternative method.

If it is the last subdirectory in the path, you can use this one-liner:

This would return the following:

The . drops back to the previous directory. /ad shows only directories /b is a bare format listing /s includes all subdirectories. This is used to get the full path of the directory to print.

I had same problem in my loop where i wanted to extract zip files in the same directory and then delete the zip file. The problem was that 7z requires the output folder, so i had to obtain the folder path of each file. Here is my solution:

%%i was a full filename path and %ii\.. simply returns the parent folder.

dp1 (etc.) only work on %0, %1, %2 etc. – Artelius Oct 2 ’19 at 4:49

In case the accepted answer by Wadih didn’t work for you, try echo %CD%

How do I find the location of an executable in Windows?

I remembered that I used a tool called as where to find locations for any executable programs like this in a console:

Now I cannot find this tool. Not sure if Windows has a build-in tool to do that search?

14 Answers 14

According to the StackOverflow answer at Is there an equivalent of ‘which’ on windows?, where.exe does this on Windows 7 and Windows Server 2003 and later:

Example

Output:

In powershell use where.exe , Get-Command (or its abbreviation gcm ), as where is the default alias for Where-Object .

EDIT: I should have added, if you can’t use the WHERE command from the command prompt, check your PATH variable. (Just use the «path» command.) Make sure C:\Windows\System32 is in your path. That’s where «where.exe» is located.

WHERE is the command you’re looking for! WHERE is like a cross between the UNIX shell built-in «which» and the «locate» command, in that it works for both command executables and regular files.

It’s also somewhat more complex than either of those two, although, in general a simple

It’s different from the «locate» command in that it’s not looking through the entire filesystem. Instead, the default behavior is to look for files in two locations:

• The current directory.
• All of the directories in the PATH variable.

So, any command that you can run directly from a command prompt without specifying the directory, will be found by the WHERE command. (Because any command like that is already in the PATH variable list.)

If you want to search only in the command path variable, you can use:

If, on the other hand, you want to find all copies of a file in a directory tree, you can use:

Finally, WHERE will find commands and any files with an extension from the PATHEXT variable without including the extension. All other files have to be specified either exactly or with wildcards.

Take for example the files «dxdiag.exe» and «dxdiagn.dll». Note the following command and its output:

It succeeds in returning all versions of «dxdiag.exe» because «.exe» is one of the extensions in the PATHEXT variable. (Note: «WHERE dxdiag» would have worked as well, because C:\Windows\System32 is in the PATH variable.)

on the other hand, fails to return any result, because «.dll» is not in PATHEXT.

In this case, look at the result that adding a wildcard gives us:

It successfully returns all versions of dxdiagn.dll.

For more information, use «WHERE /?». Hope this helps!