How to clear cache linux

How to Clear Memory Cache in Linux

Sometimes the system goes out of memory due to huge RAM is used by cached objects. In that cases, either you need to increase physical memory in the system or add more swap space. You can also instruct kernel to clear RAM memory cache on system by adding a number in /proc/sys/vm/drop_caches file.

It is safe but not recommended to clear the memory cache on a Linux system. Clearing the Memory cache in Linux systems slows down the system performance as reading files from memory is much faster than persistent disk. Since it discards cached objects from memory, it may cost a significant amount of I/O and CPU to recreate the dropped objects. This tutorial will help you to clear the memory cache on Linux/Unix system via the command line.

How to Clear Memory Cache on Linux

There are three options available to clear the memory cache in Linux. Choose one of the below options to flush the Linux system cache memory as per your requirements.

• Clear PageCache, dentries and inodes in cache memory. In short it will clear all the memory cache:
• Clear dentries and inodes only in cache memory
• Clear page cache only in cache memory

Here the first command sync is used to synchronize all the in-memory cache files to the persistent storage. The next command is separated with a “;”. Once the first command is completed, the next command will be triggered to clear cache memory.

Scheduleng the Clear Memory Cache with Crontab

You can also schedule a corn job to clear the cache on a regular basis. Schedule the following in system crontab to automatically flush cache memory at a regular interval.

Open a terminal and execute ‘crontab -e’ command to edit crontab:

Append below entry to the file:

The above cron will execute on every hour and flushes the memory cache on your system.

On the production servers, it is not recommended to schedule a clear cache command. It can lead to data corruption or data loss. So beware before running the above command in a production environment.

How to find Cached Memory in Linux

Use free command to find out cache memory uses by Linux system. The output of the free command is like below

Here the last column is showing cached memory (12953 MB) on Linux system. The -m option is used to show output MB’s.

Источник

How to Drop/Flush/Clear Cache Memory or RAM in Linux (RedHat/CentOS 7/8) in 6 Best Steps

Table of Contents

In this article, I will take you through different steps to drop/flush/clear cache memory in Linux. As you might be aware Linux has very robust Memory Management System but still if you need to clear cache memory due to certain reasons then you need to do it manually.

Someday if you ran into a problem where you find that updated data is not visible or accessible from Page Cache then you might need to clear cache memory once and check if it helps. This is required because once the cache memory is cleared then System has to access the files from Disk and hence you will get the updated data. The only downside is that clearing Cache memory will slow down your systems atleast until the cache re-build takes place.

What is Cache

Cache are usually a small reserve amount of memory used generally for faster access of disk files and directories. This Cache is generally called as Page Cache in Linux.

How Page Cache Works in Linux

Page cache is the main Linux disk Cache used in Linux. System will usually add a page based on User read process request. If the requested page is not available in the Cache then the page will be added to the disk and will be available as long as it is needed. This increases the performance of Input Output Read Operations. The only criteria is that Cache should be enough memory available. Page Cache also needs to be in sync with the disk files as new changes in the file should be synced with Cached data or it will marked as dirty and eventually will be removed from the Page Cache.

How to Check Linux Cache Memory

You might be aware of free command in Linux command line to check the current memory usage of the System. Using this command, you can check the total memory, used memory, cache or buffer memory, available memory etc as can be observed from below output. As you can see from below output, 137 MB is the current buffer/Cache memory.

How to Clear Cache Memory in Linux

Example 1: How to Clear Page Cache Only

If you want to clear your disk cache then you need to run echo 1 > /proc/sys/vm/drop_caches after running sync command as shown below.

Example 2: How to Clear Page Cache Every day through crontab

You can also set a small script in crontab to clear cache memory every day as shown below. Please note that clearing cache memory everyday might slow down your system. Hence this needs to be carefully setup.

Example 3: How to Clear dentries and inodes Only

If you want to clear your dentries and inodes then you need to run echo 2 > /proc/sys/vm/drop_caches after running sync command as shown below.

Example 4: How to Clear dentries and inodes every day through crontab

You can also set a small script in crontab to clear page cache every day as shown below. Please note that clearing cache memory everyday might slow down your system. Hence this needs to be carefully setup.

Example 5: How to Clear Page Cache, dentries and inodes

If you want to clear your all disk cache, dentries and inodes then you need to run echo 3 > /proc/sys/vm/drop_caches after running sync command as shown below.

Example 6: How to Clear Page Cache, dentries and inodes every day through crontab

You can also set a small script in crontab to clear cache memory every day as shown below. Please note that clearing cache memory everyday might slow down your system. Hence this needs to be carefully setup.

Popular Recommendations:-

Источник

How to clear the buffer/pagecache (disk cache) under Linux

Are you facing a performance issue and you suspect it might be related to cache usage? High cache usage should not normally cause performance issues, but it might be the root cause in some rare cases.

What is Memory Cache

In order to speed operations and reduce disk I/O, the kernel usually does as much caching as it has memory By design, pages containing cached data can be repurposed on-demand for other uses (e.g., apps) Repurposing memory for use in this way is no slower than claiming pristine untouched pages.

What is the purpose of /proc/sys/vm/drop_caches

Writing to /proc/sys/vm/drop_caches allows one to request the kernel immediately drop as much clean cached data as possible. This will usually result in some memory becoming more obviously available; however, under normal circumstances, this should not be necessary.

How to clear the Memory Cache using /proc/sys/vm/drop_caches

Writing the appropriate value to the file /proc/sys/vm/drop_caches causes the kernel to drop clean caches, dentries and inodes from memory, causing that memory to become free.

1. In order to clear PageCache only run:

2. In order to clear dentries (Also called as Directory Cache) and inodes run:

3. In order to clear PageCache, dentries and inodes run:

Running sync writes out dirty pages to disks. Normally dirty pages are the memory in use, so they are not available for freeing. So, running sync can help the ensuing drop operations to free more memory.

Page cache is memory held after reading files. Linux kernel prefers to keep unused page cache assuming files being read once will most likely to be read again in the near future, hence avoiding the performance impact on disk IO.

dentry and inode_cache are memory held after reading directory/file attributes, such as open() and stat(). dentry is common across all file systems, but inode_cache is on a per-file-system basis. Linux kernel prefers to keep this information assuming it will be needed again in the near future, hence avoiding disk IO.

How to clear the Memory Cache using sysctl

You can also Trigger cache-dropping by using sysctl -w vm.drop_caches=[number] command.

1. To free pagecache, dentries and inodes, use the below command.

2. To free dentries and inodes only, use the below command.

3. To free the pagecache only, use the below command.

Источник

How To Clear .Cache Folders and Free Up Space On Your Linux PC

Clean up your cache in a few easy steps!

GNU/Linux has implemented efficient storage management for its users. But have you noticed your Linux system running out of space, filled with unused packages you installed months or years ago? How do find them and remove them? Here are a few valuable tips!

Cache File Location

Cache files are stored in /home/username/.cache which mostly consists of your browser’s data, IDE’s (if you use any ) and other software. Each user has its own data and this can build up exponentially . In order to clear it all it’s recommended to have Disk usage analyzer installed.

Disk Usage Analyzer

Disk Usage Analyzer, formerly known as Baobab, is a graphical disk usage analyzer for the GNOME desktop environment. It was part of gnome-utils, but has been a standalone application since GNOME 3.4.

The software gives the user a graphical representation of a disk drive’s contents. The interface allows for selection of specific parts of filesystem so a single folder, the entire filesystem, and even remote folders and filesystems can be scanned and listed at the folder level.

The graphical representation can be switched between a ‘Rings’ chart and a ‘Treemap’ chart to better suit the content being viewed.

Installation

If you don’t already have Disk Usage Analyzer installed, you first need to install the baobab package:

Clear Cache files and folders

Click on home for your user data .

Click on your second disk i.e Vostro-14-3468 as shown in the image below .

Note: Names will be different on your own computer.

Here, the other disks shown as New Volume / 262 GB volume are formatted disks for a dual boot system, in my case Ubuntu 20.10 and Windows 10.

As you click on it, the Disk Usage Analyzer will start to scan your directory for files and folders. Be patient and allow it to finish. After Disk Usage Analyzer is done scanning your Linux PC for files it shows the live illustration of Linux disk usage as the form of a pie chart.

To see updated changes in your filesystem, you’ll need to refresh the scan as it won’t track these storage changes “live.”

Look in the folder tree structure for .cache, and click on it .

Once you click on the .cache folder, the disk usage analyzer will show you the space it’s consuming graphically on the right side .

• Find the sub folders inside it which you wish to delete .
• Right-click each one
• Select Move to trash / bin
• Now empty your trash / bin

And you are done!

Do not worry about deleting these folders. It is totally safe and the software will recreate them if and when it needs to.

WARNING!

Do not delete anything from your usr and var directories. usr is used for “user programs”. Usually your package manager installs all the binaries, shared files etc. from all programs here (except config files, which go to /etc).

You can check /usr/bin for binaries, /usr/share for shared files (media, etc), /usr/share/doc for documentation.

There is also an /opt folder, where there are “other” binary programs or programs installed from sources other than the default package manager. Some programs like that (usually compiled) also go to usr/local

/var is usually used for log files, ‘temporary’ files (like mail spool, printer spool, etc), databases, and all other data not tied to a specific user.

Logs are usually in /var/log databases in var/lib (mysql — var/lib/mysql ), etc.

If you liked this article, please follow the author on medium !

Источник

How to Clear Cache on Linux

How Linux File System Cache Works

The kernel reserves a certain amount of system memory for caching the file system disk accesses in order to make overall performance faster. The cache in linux is called the Page Cache. The size of the page cache is configurable with generous defaults enabled to cache large amounts of disk blocks. The max size of the cache and the policies of when to evict data from the cache are adjustable with kernel parameters. The linux cache approach is called a write-back cache. This means if data is written to disk it is written to memory into the cache and marked as dirty in the cache until it is synchronized to disk. The kernel maintains internal data structures to optimize which data to evict from cache when more space is needed in the cache.

During Linux read system calls, the kernel will check if the data requested is stored in blocks of data in the cache, that would be a successful cache hit and the data will be returned from the cache without doing any IO to the disk system. For a cache miss the data will be fetched from IO system and the cache updated based on the caching policies as this same data is likely to be requested again.

When certain thresholds of memory usage are reached background tasks will start writing dirty data to disk to ensure it is clearing the memory cache. These can have an impact on performance of memory and CPU intensive applications and require tuning by administrators and or developers.

Using Free command to view Cache Usage

We can use the free command from the command line in order to analyze the system memory and the amount of memory allocated to caching. See command below:

What we see from the free command above is that there is 7.5 GB of RAM on this system. Of this only 209 MB is used and 6.5 MB is free. 667 MB is used in the buffer cache. Now let’s try to increase that number by running a command to generate a file of 1 Gigabyte and reading the file. The command below will generate approximately 100MB of random data and then append 10 copies of the file together into one large_file.

Now we will make sure to read this 1 Gig file and then check the free command again:

We can see the buffer cache usage has gone up from 667 to 1735 Megabytes a roughly 1 Gigabyte increase in the usage of the buffer cache.

Proc Sys VM Drop Caches Command

The linux kernel provides an interface to drop the cache let’s try out these commands and see the impact on the free setting.

We can see above that the majority of the buffer cache allocation was freed with this command.

Experimental Verification that Drop Caches Works

Can we do a performance validation of using the cache to read the file? Let’s read the file and write it back to /dev/null in order to test how long it takes to read the file from disk. We will time it with the time command. We do this command immediately after clearing the cache with the commands above.

It took 8.4 seconds to read the file. Let’s read it again now that the file should be in the filesystem cache and see how long it takes now.

Boom! It took only .2 seconds compared to 8.4 seconds to read it when the file was not cached. To verify let’s repeat this again by first clearing the cache and then reading the file 2 times.

It worked perfectly as expected. 8.5 seconds for the non-cached read and .2 seconds for the cached read.

Conclusion

The page cache is automatically enabled on Linux systems and will transparently make IO faster by storing recently used data in the cache. If you want to manually clear the cache that can be done easily by sending an echo command to the /proc filesystem indicating to the kernel to drop the cache and free the memory used for the cache. The instructions for running the command were shown above in this article and the experimental validation of the cache behavior before and after flushing were also shown.

About the author

Linux Wolfman

Linux Wolfman is interested in Operating Systems, File Systems, Databases and Analytics and always watching for new technologies and trends. Reach me by tweeting to @linuxhint and ask for the Wolfman.

Источник