How to rename directory linux

How To Rename Directories and Folders In Linux?

Renaming or moving directories and folder can be tricky if those directories and folders have some subfolders. Or the destination may have all ready same name folder which will create some error. In this tutorial we will look how to rename and move directories and folders in Linux.

Rename Using Mv Command

The defacto command for rename directories and folders is mv . mv is the short form for the move . We can simply rename by providing the current directory and folder name and destination directory or folder name. Syntax is like below. If the source or current directory folder have content we need to rename by using recursive move. This will only change given directory or folder name but move all sub files and folder.

In this example we will rename directory named backup into old_backup .

Verbose

While renaming or moving files and folders we may need to get verbose information. Verbose mode will print every move or rename. This will be helpful for recursive option. We will provide -v to enable verbose.

Verbose

Overwrite Forcibly If Exists

In some cases there may be existing folder or directory with the new name. We need to confirm the overwrite. But this can be daunting task if there is a lot of them. We can overwrite existing files and folder with -f option automatically. -f means forcibly.

Prompt For Confirmation Before Overwriting

If we do not want to write existing file forcibly we can confirm for each file rename. In this case we have to use -i like below.

Источник

Linux Rename Folder Command

Linux Rename Folder Command

The procedure to rename a folder or directory on Linux:

  1. Open the Terminal application.
  2. Type the following command to rename foo folder to bar:
    mv foo bar
    You can use full path too:
    mv /home/vivek/oldfolder /home/vivek/newfolder

Let us see examples and syntax in details.

How to rename folders in Linux

The pwd command shows current working directory:
pwd
Sample outputs:

mv command syntax form is as follows:
mv old-name new-name
mv [options] old-name new-name
mv [options] source target
To rename a directory called pics to mypictures in the current directory:
pwd
ls -l
mv pics mypictures
Verify it with the ls command:
ls -l
If the mypictures folder is located in the same directory as the pics folder, then the pics folder can only be renamed. Hence always use pwd command and ls command to find out your current working directory.

How to move folders in Linux

The following command would move a folder named accounting, without changing its name, from the current directory to an existing directory named /mnt/backups/:
mv accounting /mnt/backups/
You can give full path too:
mv /home/vivek/accounting/ /mnt/backups/
Let us move multiple files/folders. The following mv command moves all files and directories, including all the contents of those directories, from the current directory to the directory /raid/home/new/vivek/:
mv * /raid/home/new/vivek/
The asterisk is a wildcard character that represents any or all files in the current directory. To get confirmation when renaming or moving folders pass the -i too mv command to avoid overwriting files/folders:
mv -i file.doc

Читайте также:  Zotac gt 430 драйвер windows 10

/Documents/
OR
mv -i ExcelFiles

/Documents/
Sample outputs:

Pass the -v to explain what is being done i.e. show whether file being moved or renamed and so on:
$ mv -v old new
$ mv -v file.doc /backups/
Pass the -n option to mv to not overwrite an existing file/folder:
$ mv -v -n file.doc /backups/
Sample session from above commands:

Getting help

Issue the following command at the cli to read man page of mv for all option:
man mv
OR
mv —help
Sample outputs:

Источник

Unix Command To Rename A Folder

H ow do I rename a folder under UNIX operating systems using a command line tools?

You need to use the mv command to rename a folder under UNIX operating systems. You must have write permission for all folders.

Tutorial details
Difficulty level Easy
Root privileges No
Requirements None
Est. reading time 1m

Syntax to rename a directory on Unix

The syntax is as follows:
mv old-folder-name new-folder-name

mv /path/to/old /path/to/new

Example: Unix rename a directory command

In this example, a folder called drivers is renamed as olddrivers. Open a terminal (shell prompt) and type the following commands:

  • No ads and tracking
  • In-depth guides for developers and sysadmins at Opensourceflare✨
  • Join my Patreon to support independent content creators and start reading latest guides:
    • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
    • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
    • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
    • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
    • How to protect Linux against rogue USB devices using USBGuard

Join Patreon

OR pass the -v option to get verbose output:

Do not prompt for confirmation before overwriting

Prompt for confirmation before overwriting

Pass the -n option to mv command to do not overwrite an existing file/dirname. The -n option overrides any previous -f or -i options:

Recommend readings

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

How to Rename a Directory in Linux

Even if you want to move, copy or rename a directory, it is quite handy to perform these functions with commands; you don’t need to install any specific tool.

In Linux distributions, everything is in the form of directories. So, it is good to keep all of them in a structured way. Sometimes, we need to create temporary folders to save data and later on, to keep them permanently, we have to rename those directories.

There are no traditional commands to rename a folder/directory; it can be done using several ways. We will discuss in this guide how to change the directory name using the “mv” command and “rename” command. It might shock you that this operation can be performed using the “mv” command. The “mv” command is not only used to move one directory to another; it is a multi-purpose command which helps to rename a directory as well.

So, let’s check how we can do use the “mv” command and “rename” command:

How to Rename a Folder Through “mv” Command

To rename a folder through the “mv” command is the simplest way you have ever seen.

Create a directory in the terminal named “temp”:

To move the “temp” directory, make another directory with the name “temp 2”:

You can see in the home directory, two directories with the given names are created:

Now, move the “temp” to the “temp2” directory using the “mv” command:

Open the “temp 2” directory to check if the “temp” directory is successfully moved:

After moving, use the “mv” command again to rename a “temp2” directory:

So, the temp2 directory has been renamed successfully to the “new_Dir” directory:

You can also confirm it using a terminal to active a “new_Dir” directory in it, and check if the “temp” directory (we created first and moved to temp2 folder is present in the “new_Dir” directory or not):

To activate a “new_Dir” folder in the terminal, use the “cd” command:

Now, to display the list of files present in the “new_Dir” folder, type the “ls” command:

How to Rename a Folder Through “rename” Command

The “rename” command is a built-in tool in most Linux distributions that helps to rename folders and directories. It uses regular expressions to perform functions.

If it is not present in your system. Use the following command:

The syntax used for the “rename” command is:

Consider the given examples to check if it’s working:

Example 1:
To rename the directories from lowercase to uppercase, run the ls command to display directories in the desktop directory:

Use the rename command with the following expressions to change letter case:

To confirm it, type “ls” again:

Example 2:
To rename the text files present in the desktop directory as pdf files, run the command:

Type the “ls” command to display the output:

You can also rename a directory through GUI by simply right click on the desired folder and navigate to the “rename” option:

Click on the “rename” option, type the name you want to update, and click to the “rename” button:

And the directory name will be changed:

Conclusion

In this write-up, we have seen how to rename a directory in Linux operating system. There are multiple ways to do it, but why choose a difficult way when the simplest approach is available.

We have learned from this guide to rename directories using the “mv” command and “rename” command. The “mv” command is considered a multi-tasking command tool whereas, using the “rename” command directories can be changed through regular expressions. We have also checked it through the GUI approach.

About the author

Wardah Batool

I am a Software Engineer Graduate and Self Motivated Linux writer. I also love to read latest Linux books. Moreover, in my free time, i love to read books on Personal development.

Источник

Как переименовать папку Linux

Переименовать папку в Linux не намного сложнее, чем переименовать файл. Вы можете сделать это в графическом интерфейсе или с в терминале с помощью нескольких команд. Как и для других задач в Linux для этой существует множество способов решения.

Можно переименовать не просто одну папку, а выбрать стразу несколько и настроить для них массовое переименование. Вы можете использовать команду mv, rename, а также утилиту find для массового переименования. Но сначала давайте поговорим о том как всё это сделать в файловом менеджере.

Как переименовать папку в Linux

1. Файловый менеджер

Самый простой способ переименовать папку — в файловом менеджере. Например, для Ubuntu это Nautilus. Откройте файловый менеджер и кликните правой кнопкой мыши по нужной папке. В контекстном меню выберите Переименовать:

Затем просто введите новое имя:

После нажатия клавиши Enter папка будет переименована.

2. Команда mv

Команда mv предназначена для перемещения файлов в другое место, однако её можно без проблем использовать чтобы переименовать папку или файл не перемещая его никуда. По сути, если файл или папка перемещается в пределах одного раздела диска, то на самом деле они просто переименовываются, а физически остаются на том же месте. Синтаксис:

$ mv старое_имя новое_имя

Чтобы переименовать папку

/Музыка/Папка 1 в Папка 11 используйте:

Если в имени файлов есть пробелы, то путь к файлу следует взять в кавычки. После выполнения этой команды папка будет переименована:

Обратите внимание, что слеш в конце папки назначения писать нельзя, иначе, ваша папка будет перемещена в указанную папку, если такая существует.

3. Команда rename

Команду rename можно использовать аналогично mv, только она предназначена специально для переименования файлов и папок поэтому у неё есть несколько дополнительных возможностей. Синтаксис команды следующий:

$ rename регулярное_выражение файлы

Но прежде всего программу надо установить:

sudo apt install rename

Самый простой пример, давайте заменим слово «Папка» на «Dir» во всех папках:

Можно пойти ещё дальше и использовать регулярное выражение чтобы заменить большие буквы в названиях на маленькие:

Чтобы не выполнять действия, а только проверить какие папки или файлы собирается переименовывать команда используйте опцию -n:

4. Скрипт Bash

Для массового переименования папок можно использовать скрипт на Bash с циклом for, который будет перебирать все папки в директории и делать с ними то, что нужно. Вот сам скрипт:

#!/bin/bash
for dir in *
do
if [ -d «$dir» ]
then
mv «$

» «$_new»
fi
done

Этот скрипт добавляет слово _new для всех папок в рабочей директории, в которой был он был запущен. Не забудьте дать скрипту права на выполнение перед тем, как будете его выполнять:

chmod ugo+x dir_rename.sh

5. Команда find

Массовое переименование папок можно настроить с помощью утилиты find. Она умеет искать файлы и папки, а затем выполнять к найденному указанную команду. Эту особенность программы можно использовать. Давайте для всех папок, в имени которых есть dir добавим слово _1. Рассмотрим пример:

find . -name «Dir*» -type d -exec sh -c ‘mv «<>» «<>_1″‘ \;

Утилита ищет все папки, в имени которых есть слово Dir, затем добавляет с помощью mv к имени нужную нам последовательность символов, в данном случае единицу.

6. Утилита gio

Утилита gio позволяет выполнять те же действия что и с помощью обычных утилит mv или rename, однако вместо привычных путей, можно использовать пути GVFS. Например: smb://server/resource/file.txt. Для переименования папки можно использовать команду gio move или gio rename. Рассмотрим пример с move:

Переименование папки Linux выполняется аналогично тому, как это делается с помощью mv.

Выводы

В этой небольшой статье мы рассмотрели как переименовать папку Linux. Как видите, для этого существует множество способов и всё делается достаточно просто.

Источник

Читайте также:  Windows send mail server
Оцените статью