Huawei hilink mac os driver

Question: Q: Huawei dongle e3372 support on mac os catalina

i’m not able to use huawei dongle e3372 on my mac after updating to catalina before it was working good in mojave. Please help me. Provide any software to run on catalina?

Posted on Oct 11, 2019 6:14 AM

Helpful answers

I found the solution for this issue. I’m able to use my Vodafone E3372 — 607 Datacard in Catalina.

1. Follow steps installation steps from the HiLink Installation Guide from Download982.8KB.
2. Download the HiLink application from Hilink products tool, support MAC 10.15.

Nov 2, 2019 1:21 PM

There’s more to the conversation

Loading page content

Page content loaded

Check with Huawei to see if your product is compatible with Catalina and it they have any updated software.

Oct 11, 2019 6:57 AM

it was working good in Mojave but when I updated my MacBook pro to Catalina, it has stop working. App does not support this type of error, I’m getting? Any software in 64-bit compatible in Huawei mobile partner?

Oct 11, 2019 7:05 AM

Ask Huawei if they have 64 bit support. You upgraded your OS to 64 bit only. Now you have to run 64 bit apps. Apple does not develop or provide third party software.

Oct 11, 2019 7:26 AM

Im having the exact same problem, O2 are my providers for the dongle and I just called them up and they said its down to Huawei to update the dongle but they have no idea when this will be, leaves me stuck into a contract with a dongle that isnt working.

Источник

Installing Huawei E3372 On macOS 11 Big Sur, Mac OS 10.12 Sierra And macOS 10.13 High Sierra

A Huawei E3372 / Telekom Speedstick LTE V mobile broadband modem USB stick is easily installed on macOS Big Sur 11, macOS 10.12 Sierra and macOS 10.13 High Sierra without using Mobile Partner software and despite Apple’s System Integrity Protection ‘csrutil’. Just use the following work around to get your Huawei E3372s-153 / T-Com Speedstick LTE V running on macOS 11 Big Sur, macOS 10.12 Sierra or macOS 10.13 High Sierra. This tweak also applies to Huawei E3276, Huawei K3765-HV (Vodafone K3765-HV) and any other Huawei mobile broadband modem like Huawei E160, Huawei E173, Huawei E3331, Huawei E3531, Huawei E3533 and Huawei K5150 (Vodafone K5150-H). If you also have a Windows 8 / 8.1 or Windows 10, you just follow the Windows 8 / 8.1 instructions for Huawei K3765.

I conducted the installation with the following set up:

• MacBook (Retina, 12-inch, Early 2016) with macOS 10.12 Sierra beta 5 installed.
• Huawei E3372s-153 / Telekom Speedstick LTE V (LTE FDD : Cat4 DL:150Mbps/UL:50Mbps @20M BW, UMTS: DCHSPA+:42/5.76Mbps;21M/5.76Mbps;14M/5.76M, HSUPA:7.2M/5.76M, 2G: EDGE packet data service of up to 236.8kbps) with micro SD slot and two hidden connectors for external antenna (Specifications Huawei E3372):

The work around to install Huawei E3372 on macOS 11 Big Sur, macOS 10.12 Sierra and macOS 10.13 High Sierra without Mobile Partner Software is as follows:

After disabling System Integrity Protection / ‘csrutil‘, insert the SIM-card into your Huawei E3372, connect it to your Mac and skip installation of Internet Manager Software (for Telekom Speedstick LTE V only).

Installing Huawei E3372s-153 on macOS 10.12 Sierra_1_Skip T-Com Internet Manager

Huawei Mobile Connect Driver for Mac (software version 4.25.45.00, update for MacBook air)

Languages:	English
Author:	Huawei
Platforms:	Mac OS X
Category:	Huawei
Date:	February 9, 2014

Installing Huawei E3372s-153 on macOS 10.12 Sierra_4_Select interface

Installing Huawei E3372s-153 on macOS 10.12 Sierra_5_Network set up connect and apply settings

Installing Huawei E3372s-153 on macOS 10.12 Sierra_6_Successfully connected

Note: Every time you plug the Huawei E3372s-153 / Telekom Speedstick LTE V to your Mac again, installation of T-Mobile Internet Manager software is prompted. Just ignored it and skip it.

Installing Huawei E3372s-153 on macOS 10.12 Sierra_7_How to reconnect

Installing a Huawei E3372 / T-Com Speedstick LTE V mobile broadband modem USB stick on macOS is easily done by using the Huawei Mobile Connect Driver and the Mac’s built-in network preferences after disabling System Integrity protection ‘csrutil’. Mobile Partner software is not needed!

Источник

Question: Q: Problems with Huawei HiLink modem and «El Capitan»

Does anybody know if there a release of some drivers for El Capitan and a Huawei Hilink.

After upgrading to El Capitan my Huawei E3531 3G modem (Hilink) does not work anymore.

I can´t find anything on Huawei´s site about it.

Is there a fix or solution?

Posted on Oct 5, 2015 2:04 AM

All replies

Loading page content

Page content loaded

I’ve downloaded the latest drivers from Huawei for 10.11

But it still did not work!

Any ideas or fixes are highly appreciated.

Oct 16, 2015 5:14 AM

Yes, Jogger67, doesn’t work. Also not working if you are using the trick described here:
Re: Huawei internet dongle not working in El Capitan

Something is missing in the offered solutions…

Oct 26, 2015 10:15 AM

Hey, I had the same problem, and I’ve resolved it by using an updated software of HiLink

Feb 10, 2016 12:47 PM

If above does not work after installation, disconnect (remove USB, turn off Mobile Partner etc) and try again.

Apr 6, 2016 10:23 PM

The higher order question is, is there an alternative to upgrading Mac OS? In my case, I «scaled» up El Capitan arose because of Google Chrome prompts that older versions of Mac OS would no longer be supported. Much has been written about issues users faced upgrading to Mac OS 10.11, both during (time and bandwidth needed) and after upgrade. For instance, WiFi doesn’t work, nor do some software and hardware, including Huawei.

For those wondering about alternatives to upgrade, I did explore using Firefox with Google Mail, Calendar, Keep and Blogger. Firefox did work, to some extent. There are tradeoffs, e.g., Chrome has built in print as pdf. For Firefox, print as pdf requires app download.

When you get to the top successfully, heave a sigh of relief, the view is great 🙂

Источник

Huawei hilink mac os driver

• Africa
• Asia Pacific
• Europe
• Latin America
• Middle East
• North America
• Global

Способ 1. При помощи HUAWEI PC Manager Рекомендации

Откройте HUAWEI PC Manager и перейдите в раздел Драйверы для обновления драйверов из официальных источников. Если HUAWEI PC Manager не установлен, нажмите здесь, чтобы загрузить его.

Способ 2. При помощи моделей продуктов

Неверный код подтверждения

Неверный код подтверждения

Примечание. Рекомендуется использовать HUAWEI PC Manager для обновления драйверов. Если HUAWEI PC Manager не установлен, нажмите здесь, чтобы загрузить его.

Список драйверов (0)

• звук
• видеокарта
• WLAN
• Bluetooth
• сканер отпечатка пальца
• камера
• мышь, клавиатура
• горячие клавиши
• процессор
• BIOS
• безопасность
• встроенное ПО
• прочее

Данные драйвера не найдены. Повторите попытку позже.

Если вы планируете обновить драйверы самостоятельно, не выключайте и не перезагружайте систему во время обновления. Перед обновлением убедитесь, что выполнены следующие условия:

1. Целевая версия BIOS выше текущей версии BIOS.

2. Уровень заряда батареи выше 30%.

В случае серьезных последствий, вызванных ошибками обновления BIOS, рекомендуется обратиться в сервисный центр Huawei, чтобы технические специалисты обновили BIOS.

Источник

Declaration of VAR

and some other stuff

Huawei E3372 modem on Mac OS

So I have this 4G+/LTE modem — Huawei E3372, also known as Megafon M150-2 — which is exactly the variation I got.

Eventually I got sick of its connection management software for Mac OS (the one that comes from Megafon), so I started looking for a way to be able to connect to the internet on Mac OS without it.

About the modem

The modem itself is rather a great piece of hardware.

Coming in a form-factor of a USB-stick, it is capable of maintaining quite a high-speed internet connection, and apparently it supports all the international LTE standards because I was using it in several countries without problems.

On top of that it has slots for external antennas and even a slot for microSD card (don’t know what to do with it):

Note that it requires full-sized SIM-cards.

I bought it several years ago in Moscow at some Megafon selling point. Back then it cost me just

700 RUB (10-20 USD?). The reason for such a low price is usually that modems are locked to a particular operator, but in my case surprisingly that wasn’t the case.

If memory serves me well, I did not perform any unlocking operations, and it just works fine with SIM-cards from other operators than Megafon. I must say, however, I never tried it with any other russian operators — the only SIM-cards I was using it with were the ones from norwegian operators (Telia and Phonero).

And it is available for purchase even today:

• from the very same Megafon, although it is likely to be a locked version (which can be unlocked);
• an unlocked version on Amazon.

What’s wrong with the Megafon software

But what is wrong with the Megafon software? Well, while it does its job, after some time it started to irritate me for the following reasons:

1. It installs god knows what to your system, while the only thing you really need is just a modem driver;
2. In addition to the main application it requires its service to run in the background, otherwise it won’t even start discovering the modem;
3. It sends some data to different Megafon hosts. I would understand if it was for checking the updates, but why different hosts then? I don’t feel like having yet another spyware in my system;
4. File Activity tool from Instruments shows some enormous files access by the application and/or service. What could be the purpose of such an activity, I wonder?

So I started looking for a way to avoid using the Megafon software.

How to use the modem natively

The first clue was the fact that the modem works just fine with routers:

There is no need to install any Megafon software on the router for it to be able to connect to the internet via the modem, is there? So why the need in such a software on Mac OS?

After some research I got the following steps (mostly from this great topic at 4PDA and also this SuperUser answer):

1. Install the driver for Mac OS for the initial modem discovery;
2. Put the modem into a mode in which it will be discovered by Mac OS as a dial-up modem;
3. Add a new network service using the modem.

Driver for Mac OS

Maybe it’s just me, but I’ve spent quite a some time looking for a driver. Surely, I could use the one installed together with the Megafon software, but there is no way to install only the driver, and I wanted to have a “clean” set-up procedure.

Most of links I found on the internet were dead. Of course I tried looking at the official Huawei’s website, but didn’t succeed there either.

But then in a comment section at some blog I did find a link to the working driver. And it was hosted on the official Huawei’s website! I don’t know how does one find it on his own, but here’s the link.

You don’t have to install everything, the only thing you need from this package is the driver ( MobileConnectDriver.pkg ):

I will be hosting a copy just in case the official link dies like the rest at some point. Note that this is a driver for Mac OS Mojave, scroll to bottom for the Catalina version.

After the installation you should get the following thing installed:

Check if the modem is discovered in the system:

Switching to dial-up mode

I’m sure that it’s called something else and not the “dial-up mode”, but I haven’t found the correct name for it.

So, you’ve got your modem discovered by the system. Connect to it via screen :

And try to communicate with it using AT -commands. First I tried to collect some information about the device (first line in each group is the command, the following lines are the response):

From the Revision value we can see that is starts with 21 , which means that the modem has the STICK firmware. The HILINK revision numbers start with 22 . More details about firmware types are here (in russian).

Okay, and here’s the command to switch the modem into dial-up mode:

Connecting to the internet on Mac OS

The only thing left is to create a new network service in Mac OS.

Create a new service using HUAWEIMobile- interface:

Set the good old mobile dial number *99# :

And you’re connected to the internet without any additional software, using only the native Mac OS tools:

As it was pointed out in comments, the driver stopped working on Mac OS Catalina. Most likely this is because it was x32, and Catalina requires x64, so an x64 version of driver is required. That actually was one of the reasons why I haven’t upgraded to Catalina.

Fortunatelly, such version exists, and apparently has been available since at least 30.10.2019. An awesome chap shared a link on 4PDA forum. I’ll host a copy here too.

I’ve tested it on Catalina, and it works fine.

Mac OS Big Sur was released today. I installed it in the same virtual machine like the last time to test the modem, and no, it doesn’t work there.

The modem driver should have been still in the system after update, but even so, I’ve installed it again just in case (the one that worked on Catalina). Installation process went fine, didn’t even ask to allow it in Gatekeeper, but when I try to connect, it gives me this error:

And ls -l /dev/tty.HUA* shows that it’s not there.

So yeah, fuck you, Apple, I ain’t updating to Big Sur.

Источник