17.4 Collect Core Dumps

This section explains how to generate and collect core dumps (also known as crash dumps). A core dump or a crash dump is a memory snapshot of a running process. A core dump can be automatically created by the operating system when a fatal or unhandled error (for example, signal or system exception) occurs. Alternatively, a core dump can be forced by means of system-provided command-line utilities. Sometimes a core dump is useful when diagnosing a process that appears to be hung; the core dump may reveal information about the cause of the hang.

When collecting a core dump, be sure to gather other information about the environment so that the core file can be analyzed (for example, OS version, patch information, and the fatal error log).

Core dumps do not usually contain all the memory pages of the crashed or hung process. With each of the operating systems discussed here, the text (or code) pages of the process are not included in core dumps. But to be useful, a core dump must consist of pages of heap and stack as a minimum. Collecting non-truncated good core dump files is essential for postmortem analysis of the crash.

The following sections describe scenarios for collecting core dumps.

17.4.1 Collect Core Dumps on Oracle Solaris

With the Oracle Solaris operating system, unhandled signals such as a segmentation violation, illegal instruction, and so forth, result in a core dump. By default, the core dump is created in the current working directory of the process and the name of the core dump file is core. The user can configure the location and name of the core dump using the core file administration utility, coreadm . This procedure is fully described in the man page for the coreadm utility.

The ulimit utility is used to get or set the limitations on the system resources available to the current shell and its descendants. Use the ulimit -c command to check or set the core file size limit. Make sure that the limit is set to unlimited ; otherwise the core file could be truncated.

ulimit is a Bash shell built-in command; on a C shell, use the limit command.

Ensure that any scripts that are used to launch the VM or your application do not disable core dump creation.

The gcore utility can be used to get a core image of running processes. This utility accepts a process id (pid) of the process for which you want to force core dump.

To get the list of Java processes running on the machine, you can use any of the following commands:

ps -ef | grep java

The jps command-line utility does not perform name matching (that is, looking for «java» in the process command name) and so it can list Java VM embedded processes as well as the Java processes.

The following are two methods to collect core dumps on Oracle Solaris.

ShowMessageBoxOnError option on Oracle Solaris:

A Java process can be started with the -XX:+ShowMessageBoxOnError command-line option. When a fatal error is encountered, the process prints a message to standard error and waits for a yes or no response from standard input. Example 17-1 shows the output when an unexpected signal occurs.

Example 17-1 Unexpected Signal Error on Solaris

Before answering yes or pressing RETURN (Enter), use the gcore utility to force a core dump. Then you can type yes to launch the dbx debugger.

Suspend a process with truss utility:

In situations where it is not possible to specify the -XX:+ShowMessageBoxOnError option, you might be able to use the truss utility. This Oracle Solaris operating system utility is used to trace system calls and signals. You can use this utility to suspend the process when it reaches a specific function or system call.

The command in Example 17-2 shows how to use the truss utility to suspend a process when the exit system call is executed (in other words, the process is about to exit).

Example 17-2 Use truss Utility to Suspend a Process

When the process calls exit , it will be suspended. At this point, you can attach the debugger to the process or call gcore to force a core dump.

17.4.2 Collect Core Dumps on Linux

On the Linux operating system, unhandled signals such as segmentation violation, illegal instruction, and so forth, result in a core dump. By default, the core dump is created in the current working directory of the process and the name of the core dump file is core. pid , where pid is the process id of the crashed Java process.

The ulimit utility is used to get or set the limitations on the system resources available to the current shell and its descendants. Use the ulimit -c command to check or set the core file size limit. Make sure that the limit is set to unlimited ; otherwise the core file could be truncated.

ulimit is a Bash shell built-in command; on a C shell, use the limit command.

Ensure that any scripts that are used to launch the VM or your application do not disable core dump creation.

You can use the gcore command in the gdb (GNU Debugger) interface to get a core image of a running process. This utility accepts the pid of the process for which you want to force the core dump.

To get the list of Java processes running on the machine, you can use any of the following commands:

ps -ef | grep java

The jps command-line utility does not perform name matching (that is, looking for «java» in the process command name) and so it can list Java VM embedded processes as well as the Java processes.

The following is one option to collect core dumps on Linux.

ShowMessageBoxOnError option in Linux:

A Java process can be started with the -XX:+ShowMessageBoxOnError command-line option. When a fatal error is encountered, the process prints a message to standard error and waits for a yes or no response from standard input. Example 17-3 shows the output when an unexpected signal occurs.

Example 17-3 Unexpected Signal Error in Linux

Type yes to launch the gdb (GNU Debugger) interface, as suggested by the error report shown above. In the gdb prompt, you can give the gcore command. This command creates a core dump of the debugged process with the name core. pid , where pid is the process ID of the crashed process. Make sure that the gdb gcore command is supported in your versions of gdb . Look for help gcore in the gdb command prompt.

17.4.3 Reasons for Not Getting a Core File

The following list explains the major reasons that a core file might not be generated. This list pertains to both Oracle Solaris and Linux operating systems, unless specified otherwise.

The current user does not have permission to write in the current working directory of the process.

The current user has write permission on the current working directory, but there is already a file named core that has read-only permission.

The current directory does not have enough space or there is no space left.

The current directory has a subdirectory named core.

The current working directory is remote. It might be mapped by NFS (Network File System), and NFS failed just at the time the core dump was about to be created.

Oracle Solaris operating system only: The coreadm tool has been used to configure the directory and name of the core file, but any of the above reasons apply for the configured directory or filename.

The core file size limit is too low. Check your core file limit using the ulimit -c command (Bash shell) or the limit -c command (C shell). If the output from this command is not unlimited, the core dump file size might not be large enough. If this is the case, you will get truncated core dumps or no core dump at all. In addition, ensure that any scripts that are used to launch the VM or your application do not disable core dump creation.

The process is running a setuid program and therefore the operating system will not dump core unless it is configured explicitly.

Java specific: If the process received SIGSEGV or SIGILL but no core dump, it is possible that the process handled it. For example, HotSpot VM uses the SIGSEGV signal for legitimate purposes, such as throwing NullPointerException , deoptimization, and so forth. The signal is unhandled by the Java VM only if the current instruction (PC) falls outside Java VM generated code. These are the only cases in which HotSpot dumps core.

Java specific: The JNI Invocation API was used to create the VM. The standard Java launcher was not used. The custom Java launcher program handled the signal by just consuming it and produced the log entry silently. This situation has occurred with certain Application Servers and Web Servers. These Java VM embedding programs transparently attempt to restart (fail over) the system after an abnormal termination. In this case, the fact that a core dump is not produced is a feature and not a bug.

17.4.4 Collect Crash Dumps on Windows

On Windows operating system there are three types of crash dumps:

Dr. Watson logfile, which is a text error log file that includes faulting stack trace and a few other details.

User minidump, which can be considered a «partial» core dump. It is not a complete core dump, because it does not contain all the useful memory pages of the process.

Dr. Watson full-dump, which is equivalent to a Unix core dump. This dump contains most memory pages of the process (except for code pages).

When an unexpected exception occurs on Windows, the action taken depends on two values in the following registry key:

The two values are named Debugger and Auto . The Auto value indicates if the debugger specified in the value of the Debugger entry starts automatically when an application error occurs.

A value of 0 for Auto means that the system displays a message box notifying the user when an application error occurs.

A value of 1 for Auto means that the debugger starts automatically.

The value of Debugger is the debugger command that is to be used to debug program errors.

When a program error occurs, Windows examines the Auto value and if the value is 0 it executes the command in the Debugger value. If the value for Debugger is a valid command, a message box is created with two buttons: OK and Cancel. If the user clicks OK, the program is terminated. If the user clicks Cancel, the specified debugger is started. If the value for the Auto entry is set to 1 and the value for the Debugger entry specifies the command for a valid debugger, the system automatically starts the debugger and does not generate a message box.

The following are two ways to collect crash dump on Windows.

The Dr. Watson debugger is used to create crash dump files. By default, the Dr. Watson debugger (drwtsn32.exe) is installed into the Windows system folder ( %SystemRoot% \System32).

To install Dr. Watson as the postmortem debugger, run the following command:

To configure name and location of crash dump files, run drwtsn32 without any options.

In the Dr. Watson GUI window, make sure that the Create Crash Dump File check box is selected and that the crash dump file path and log file path are configured in their respective text fields.

Dr. Watson may be configured to create a full dump using the registry. The registry key is shown in Example 17-4.

Example 17-4 Registry Key to Create a Full Dump

Note: If the application handles the exception, then the registry-configured debugger is not invoked. In that case it might be appropriate to use the -XX:+ShowMessageBoxOnError command-line option to force the process to wait for user intervention on fatal error conditions.

Force a crash dump:

On the Windows operating system, the userdump command-line utility can be used to force a Dr. Watson dump of a running process. The userdump utility does not ship with Windows but instead is released as a component of the OEM Support Tools package.

An alternative way to force a crash dump is to use the windbg debugger. The main advantage of using windbg is that it can attach to a process in a non-invasive manner (that is, read-only). Normally Windows terminates a process after a crash dump is obtained but with the non-invasive attach it is possible to obtain a crash dump and let the process continue. To attach the debugger non-invasively requires selecting the Attach to Process option and the Noninvasive checkbox.

When the debugger is attached, a crash dump can be obtained using the command shown in Example 17-5.

Example 17-5 Get a Crash Dump

The windbg debugger is included in the «Debugging Tools for Windows» download.

An additional utility in this download is the dumpchk.exe utility, which can verify that a memory dump file has been created correctly.

Both userdump.exe and windbg require the pid of the process. The userdump -p command lists the process and program for all processes. This is useful if you know that the application is started with the java.exe launcher. However, if a custom launcher is used (embedded VM), it might be difficult to recognize the process. In that case you can use the jps command-line utility as it lists the pids of the Java processes only.

As with Oracle Solaris and Linux operating systems, you can also use the -XX:+ShowMessageBoxOnError command-line option on Windows. When a fatal error is encountered, the process shows a message box and waits for a yes or no response from the user.

Failed to write core dump. minidumps are not enabled by default on client version of windows

I have this Java class I am trying to run using Eclipse Mars.1 IDE.

When trying to run the following code I get the following error shown in my Eclipse console :

Here’s the error log returned from program executions

1. Updating Java to latest version.
2. Update Windows
3. Restart PC
4. Enable Mini-dumps through Advanced System Settings — > Startup & Recovery — > Settings — > Choosing ‘small memory dump’.
5. Update Graphic Driver to latest from official producer’s (Nvidia) website.
6. deleting ‘.metadata’ Folder from Eclipse’s workspace folder and Imported the existing project.

So far no luck, my simple app is trying to extract audio from a video.

2 Answers 2

Updating Java to latest version.

You have a problem in native code. Updating Java will unlikely help in that situation.

This will only help if the native code that you use is updated through Windows Updates.

Enable Mini-dumps through Advanced System Settings — > Startup & Recovery — > Settings — > Choosing ‘small memory dump’.

This setting is for kernel mode crashes (Blue Screen), not for application crashes (user mode). There is also a setting for application crashes (a Registry setting called LocalDumps) but it won’t work for Java, since Java does its own exception handling.

To get crash dumps from Java 9 and above, use the following command line switch:

On Java 8 and before, use the Windows specific command line

This will give you more details on what happens at the time of the crash. It will still be an AccessViolation but you’ll get the callstack etc. — if you have the knowledge of debugging it with WinDbg or similar.

Update Graphic Driver to latest from official producer’s (Nvidia) website.

There’s no evidence that this is related to the Graphics card.