Boot Windows Server 2012 into Safe Mode

Safe Mode is a mode in Windows which allows access to special features. These features are often used for troubleshooting.

In order to boot into Safe Mode, you will need to be able to access your Windows Server normally. That means you can access your Windows Server with a user, and have administrative privileges.

Use either of the methods below to boot your server into Safe Mode.

Method 1: Using Startup Settings

In order to enable Safe Mode by using the GUI, press Windows + C, open Settings, then click Power. Then hold Shift and click «Restart».

Click «Troubleshoot», then «Startup Settings». Click «Restart» after confirming that the list that is showing says «Enable Safe Mode».

Use the arrow keys to navigate to Safe Mode. By pressing Enter after navigating to Safe Mode, your Windows Server will be booted into Safe Mode.

Your background should be black and at the top right corner of the GUI should say «Safe Mode».

Method 2: Using msconfig

You can also boot into Safe Mode by using System Configuration ( msconfig ). In order to do this, go to Run, then launch msconfig .

In the tab Boot, under «Boot options», select «Safe boot». Then press «OK» and the server will restart in Safe Mode. Click «Restart» if you are prompted.

When Safe Mode boots, your desktop background will be black and the top-right corner of the desktop will say «Safe Mode».

How to Boot Windows Server 2012 in Safe Mode

If you are a Windows user, you must know about Safe Mode. Just before an hour, I was not able to login to my computer as my user profile was not being loaded. Then, I booted my computer in Safe Mode, and I was in. Then, I fixed the problem, and my computer is working fine now in normal mode as well.

Without any computer expert, I was able to solve the issue. Therefore, it’s important for you to know a bit about Safe Mode of your computer so that you can solve small and even big errors of your PC.

Safe Mode is basically a diagnostic mode of your computer’s operating system as it helps you fix many issues related to the OS. Safe Mode comes handy when your computer gets attacked by Trojans, Malware, or not working well due to some software. You can log into your PC using this mode and remove the problem causing software, malware, Trojans or viruses. It is called Safe Mode because it doesn’t load any third party software or drivers. Hence you can use this mode to fix the problem instantly. Also, in Safe Mode Windows uses low screen resolution since it doesn’t load many hardware and software programs.

Now, you know the importance of Safe Mode of your Windows Computer. Now, let’s talk how you can boot your computer in Safe Mode. I am mentioning two ways to boot your Windows Server 2012 in Safe Mode. And another tip is how to reset domain password on Windows server 2008.

Solution 1: Boot Windows Server 2012 in Safe Mode by using Msconfig

Msconfig is the System Configuration Utility on Windows computers, you can configure the startup of your computer using this utility.

1. First of all, press Windows + X or Simply click on «Run». Go to Start Menu and click on Run.

2. Type msconfig in Run and hit enter, it will open System Configuration dialogue box.

3. In the System Configuration, locate to Boot tab.

Check the ‘Safe Boot‘ check box, and click on OK button, it will prompt you for restarting the computer so that the changes will be applied, from next boot, your PC will start in Safe Mode. Isn’t it simple?

Solution 2: Boost Windows Server 2012 in safe mode using startup settings

1. Open settings by pressing Windows + c.

2. Click on Power Button. Now press and hold Shift key on your keyboard and click on Restart.

3. Now, you will see a sky colored screen, Click on Troubleshoot.

4. Now click on Advanced OptionsпјЊ then select Startup Settings, which can allow you to change Windows startup behavior. In the pup up windows, click ‘Restart’ button.

Now, your PC will shut down, and then restart. You will see the black screen page before the Windows load. Choose ‘Safe Mode‘, and Hit Enter. Now, your Windows Server 2012 powered PC will start in Safe Mode.

Verdict:

These are the two simple ways to boot your Windows server 2012 in Safe Mode with no hassle. You can also try restarting your PC and keep pressing F8. In most of the PCs, doing this gets you the advanced boot Options black page, in front of you, and you can select Safe Mode from there, and you are done. Share your thoughts in comments.

Vicky is a professional Windows technology author with many experience, focusing on computer technology. She’s very much enjoy helping people find solutions to their problems. Her knowledge and passion always drive her to discover everything about technology.

Password Recovery

How can I get into Safe Mode on the new Windows operating systems such as Windows 8, Windows 10 and Server 2012? Starting from Windows 8, the system boots very quickly and the time to press F8 key to access Safe Mode is smaller than 200 milliseconds, so it’s almost impossible to enter into the Safe Mode by pressing F8 during boot time.

In this tutorial we’ll show you 3 workable ways to boot Windows Server 2012 into Safe Mode. The methods should also work with Windows 10 and Windows 8/8.1.

Method 1: Boot Windows Server 2012 into Safe Mode Using Command Prompt

Press the Windows key + X to open the WinX menu, select “Command Prompt (Admin)” from the list.

In order to make Windows display the Windows Boot Manager, type the following command at the Command Prompt and press Enter. You will get a confirmation stating that The operation completed successfully.

bcdedit /set displaybootmenu yes

If you want to stop displaying the Windows Boot Manager later, run this command instead:
bcdedit /set displaybootmenu no
Now restart your computer and you’ll see the Windows Boot Manager screen. Just press F8 to bring up the Advanced Boot Options.

Select Safe Mode and press Enter. This will open Windows Server 2012 in Safe Mode.

Method 2: Boot Windows Server 2012 into Safe Mode Using System Configuration

Press the Windows key + R to open the Run box. Type msconfig and press Enter.

Now the System Configuration dialog box will be opened. Under the Boot tab, check the Safe boot option and click OK.

Reboot your computer and it will boot directly into Safe Mode automatically. If you wan to stop Windows from booting into Safe Mode next time, you need to open the System Configuration utility (msconfig) again and uncheck the Safe boot option.

Method 3: Boot Windows Server 2012 into Safe Mode Using Settings App

1. To get started, you need to open the Settings panel. This can be done by hovering your mouse to the top right-hand corner of the screen, or press the Windows key + I on your keyboard.
2. Hold down the SHIFT key on your keyboard, and then click on Power icon and select Restart.

You will need to click on the Troubleshoot option.

Click Startup Settings.

Click Restart.

The computer will boot automatically to the Advanced Boot Options screen. From there you can select Safe Mode to start Windows Server 2012 in Safe Mode.

How to Boot Windows Server 2012 in Safe Mode

«Safe Mode» in Windows is a special mode which is mainly used for troubleshooting purposes. If you can’t boot Windows successfully because of virus, fault software or driver installation, you can boot Windows in safe mode to fix the problems, such as Windows 2012 password reset.

So, how to boot Windows server 2012 in safe mode first with following three ways?

1. How to open Windows server 2012 in safe boot

Step 1: If you are using Windows Server 2012 normally, press Windows + X and click on «Run». Otherwise simply go to the Start Menu and click on «Run». Run Dialog Box will be opened.

Step 2: In the Run Dialog Box, type the command «msconfig» and click «OK» button.

Step 3: System Configuration Dialog Box will be opened. Here by default the General Tab will be opened.
You need to click on the Boot Tab. In the Boot Tab, go to the Boot options and check the «Safe Boot», then click on the «Ok» button.

Restart your system so that this configuration can be applied on your Windows server 2012 system.

2. How to start Windows server 2012 in safe mode

If you have accessed Windows server 2012, restart it to open Startup Settings, and set Windows server start in safe mode.

Step 1: Press Windows + C to open Settings.

Step 2: Click Power, hold down Shift on your keyboard and then click Restart.

Step 3: Until below screen pops up, click Troubleshoot.

Step 4: Click Advanced options.

Step 5: Click Startup Settings.

Step 6: Click Restart button.

Step 7: Choose «Safe Mode» in pop-up Advanced Boot Options, and restart Windows server 2012 in safe mode.

3. How to easily enter safe mode in Windows server 2012 with command

Step 1: Press Windows + C and click «Start» to open Start screen. Right click on Start screen and click «All apps«.

Step 2: Click on the Command Prompt and right click, then click once more Run as Administrator.

Step 3: If there is user account control, please click once yes.

Step 4: Click to input Bcdedit /set displaybootmenu yes, when completed press the Enter key on the keyboard. If you need to cancel the prompt to enter options at startup, simply change Yes to No.

Step 5: Once completed, please restart your computer, then press F8 to enter setup screen upon startup, then press F4 or 4 to enter safe mode.

Related Articles:

iSunshare is dedicated to providing the best service for Windows, Mac, Android users who are in demand for password recovery and data recovery.