Kali linux wsl wifi

Kali Linux получил графический интерфейс для подсистемы Windows для Linux (WSL2). Инструкция по установке

Команда разработчиков Kali Linux представила графический интерфейс для подсистемы Windows для Linux (WSL). Решение называется Win-Kex (Windows + Kali Desktop EXperience). Теперь можно запускать популярный дистрибутив для пентеста на ПК с Windows 10 в WSL2 с GUI.

Специалисты портала Bleeping Computer проверили, что это действительно работает. Они опубликовали свою инструкцию по установке и запуску Kali Linux с графическим интерфейсом для подсистемы Windows для Linux (WSL2).

Установка Kali Linux с GUI возможна только на ПК с ОС Windows 10 версии 2004.

На подготовительном этапе необходимо в ОС активировать подсистему Windows для Linux.

Открыть PowerShell (сейчас и далее под администратором) и запустить:

Открыть PowerShell и запустить:

Далее необходимо скачать и установить WSL2.

Потом нужно открыть PowerShell и запустить:

Далее нужно установить Kali Linux из магазина Microsoft Store.

Чтобы поменять тип установки kali-linux с WSL1 на WSL2 нужно в PowerShell запустить:

Далее нужно выполнить установку и запустить Kali Linux.

Потом нужно установить пакет Win-KeX.

Можно также установить расширенную сборку Kali Linux.

После окончание установки GUI для Kali Linux запускается командой «kex».

Источник

Кали Линукс не видит wifi модуль.

Ваша Кали Линукс не видит wifi модуль ?

Всем привет, это очередной урок по решению вопросов по неисправностям и несовместимости некоторого установленного оборудования в ноутбуки с установленной операционной системой Кали Линукс . На всеобъемлемость не претендую, покажу как решил вопрос с конкретной моделью ноутбука. Кали установлена на жёсткий диск основной системой — не ВИРТУАЛКА! Если вы предпочитаете работу в виртуальной машине, обратитесь за некоторой информацией к статье Как установить виртуальную Кали Линукс?

Параметры машины таковы:

• Имеется бюджетный ноутбук Lenovo B590
• На борту Кали Линукс версия 2.0
• Процессор от Intel с 2-мя ядрами (потом посмотрим списком…)
• Диск, оперативная память нас не волнуют, ибо…

Симптомы:

Без дополнительного модема wifi не работает, Кали Линукс не видит wifi никакого , и вообще система не понимает, установлен ли внутри модуль беспроводного соединения. Рассмотрю решение проблемы пошагово.

Любые операции начинаем с команды (если работаете из-под root):

Для начала взглянем на список установленного оборудования для приёма и трансляции сигналов. Он не богат:

Теперь взглянем, что установлено на борту Lenovo B590 и работает ли (да работает, конечно; из-под второй, установленной на том же Lenovo B590 windows 7, wifi работает отлично). Введём команду просмотра всего оборудования, кто не помнит — запоминайте — пригодится:

lspci

А вот и установленный на Lenovo B590 этой версии модуль, из-за которого Кали Линукс не видит wifi:

02:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n

Что ж, ситуация знакома: модуль на месте, драйвера — нет. Обратившись к страничке поддержки драйверов (а тогда она выглядела именно так) этого семейства для Линукс, и присмотревшись к разноцветной табличке списка поддерживаемых устройств, обнаружил, что устройство в списке не без проблем:

Ну не сидеть же нам без wifi, и не покупать дешёвенький модуль на USB (не вздумайте купить без оглядки другой модуль для своего ноута — 99% вероятности, что конфигурация ноутбука этого вам просто не позволит сделать). А альфа-карты нам нужны для другого. Поехали в Debian за справкой и посмотрим, что есть для нас новенького. Оказывается, есть и давно. Тогда установим последние версии пакетов linux-image, linux-headers и broadcom-sta-dkms. Откроем терминал и пропишем знакомой уже командой (некоторые флаги могли устареть). Но предварительно добавим к Кали ещё один репозиторий:

Сюда пропишем новый адрес с новой строки:

deb http://httpredir.debian.org/debian/ stretch main contrib non-free

А теперь установка:

На комментарии терминала на рисунке не смотрите, у меня всё уже стоит. Следите за синтаксисом команды (она не вся влезла в фото — поздно заметил). Поддержка динамического ядра модуля DKMS установит в Кали новое устройство с названием wl. Теперь выгрузим конфликтующие модули (если таковые имеются):

И, наконец, загружаем новообразованный модуль:

Если ошибок терминал не вернул, перезагружать не нужно. Проверим, что показывает NetworkManager Кали:

Менеджер заметил модуль wifi в нашем Lenovo B590. Проверим, есть ли он в списке устройств через терминал:

iwconfig

Привет… Новообразованный wlan6 режим мониторинга поддерживать не будет, однако для комфортной «официальной» работы его предостаточно. Если на каком-то из этапов терминал заругался, не примените перезагрузить Кали с командой на полное обновление:

Источник

Установка Kali Linux с Win-KeX (графический интерфейс) в WSL2

Установка Kali Linux с Win-KeX (графический интерфейс) в WSL2

Предлагаю разобрать установку Kali Linux в ОС Windows 10 версии 2004 или выше, с графической оболочкой Win-KeX, поддержка интернета, звука, запуск приложений из терминала.

WSL (Windows Subsystem for Linux) — слой совместимости для запуска Linux-приложений (двоичных исполняемых файлов в формате ELF) в Windows 10.

WSL 2 — новая версия архитектуры в Windows Subsystem for Linux, которая изменяет способ взаимодействия дистрибутивов Linux с Windows.

Win-KeX — Kali Desktop Experience для Windows (рабочий стол Kali с графическим пользовательским интерфейсом).

Kali Linux — чёрт его знает, что это такое:)

Windows 10 — тем более не знаю, что за зверь.

Уже говорил, когда вели установку Kali Linux из магазина приложений Windows (способ для WSL) ссылка что мне не совсем понятно, зачем Microsoft Corporation всё это замутило.

Сам придерживаюсь только варианта установки любых операционных систем на жёсткий диск, без всяких виртуальных машин и тому подобных надувных резиновых кукол, помогающих справиться с болезненными переживаниями и одиночеством.

Ну, да ладно. Тема задана, возможно кому-то будет интересно.

❶ Включите компонент «Подсистема Windows для Linux» (панель управления → программы и компоненты → включение или отключение компонентов Windows).

❷ Включите компоненты Hyper-V (панель управления → программы и компоненты → включение или отключение компонентов Windows).

❸ Установите обновление ядра Linux WSL2 со страницы https://docs.microsoft.com/ru-ru/windows/wsl/wsl2-kernel и перезагрузите компьютер

❹ Запустите PowerShell от имени администратора и выполните команду:

wsl —set-default-version 2 (задаем Windows Subsystem for Linux 2 в качестве версии по умолчанию при установке нового дистрибутива Linux).

❺ Установите Kali Linux из магазина Microsoft Store.

❻ После завершения установки в PowerShell от имени администратора выполните команду:

wsl —set-version kali-linux 2 (обновляем версию Windows Subsystem for Linux для Kali Linux)

Проверка: wsl -l -v

Запустите Kali Linux:

И выполните команды (там будет еще много всяко-разных мелких деталей, поэтому смотрите ролик ):

sudo apt -y update && sudo apt dist-upgrade
sudo apt install -y kali-win-kex

Можно установить расширенную сборку Kali Linux:

sudo apt install kali-linux-large (долго, очень долго, жуть как долго).

❼ После окончание установки GUI для Kali Linux запускается командой «kex»:

❽ Запустится Kali Linux с графическим интерфейсом в полноэкранном режиме. Для выхода из полноэкранного режима можете вызвать меню клавишей F8 и отключить опцию «Full Screen».

Или нажмите Ctrl+Alt+Delete и выберите Диспетчер задач. Затем закройте процесс Win-KeX Kali Linux.

❾ Если потребуется включить русский язык интерфейса для Kali Linux:

sudo -s
apt install locales
dpkg-reconfigure locales

Выбираем стрелкой на клавиатуре ru_RU UTF-8, Пробел → Tab → Enter.

Закрываем окно терминала и окно графического интерфейса, в терминале из которого мы запускали графический интерфейс вводим:

Снова запускаем kex — интерфейс будет на русском языке.

Чтобы правильно закрыть Win-KeX и вернуться в интерфейс командной строки, выполните команду: kex kill

Источник

wifi card on ubuntu bash on windows 10 #1077

Comments

htanh034 commented Sep 13, 2016 •

how to receive the wifi card on ubuntu bash on windows 10 >>to using wifite (kali tools)

The text was updated successfully, but these errors were encountered:

jackchammons commented Sep 13, 2016

Can you please provide more information regarding your issue? See our contributing.md for help.

rodrymbo commented Sep 14, 2016

Just a note: so far Windows handles all networking for WSL. None of the usual linux networking commands work (though ping and traceroute can work if one runs bash.exe elevated). If Windows is configured to use wifi, WSL/bash.exe should use it without any trouble. The main problem people have is if DNS is misconfigured in WSL ( /etc/resolv.conf ), it looks like no networking is functioning.

If the use case is pentesting a wifi subnet, that would make a good argument for fixing WSL so such tools can work, especially if they are linux-only.

fpqc commented Sep 16, 2016

I do wonder if one day in the distant future, MS will figure out a way to make the devices available to WSL, but using the Windows-loaded drivers rather than trying to use the Linux ones. It would probably require some kind of translation of the WinNT HAL to something that udev could read. I tried reading up a bit on how Linux provides a usermode interface to drivers, but it seems like it’s split up across all the different types of devices.

joowdx commented Apr 21, 2017

Hi. I have the same issue.

When running wifite it gives me these errors.

Does bash on windows have any direct access to physical hardware like wireless card?
Running parted too has its own errors.

aseering commented Apr 21, 2017

Hi @joowdx — no, WSL does not, for the most part, have direct physical access to your hardware.

Recent Insider builds just gained direct physical access to serial ports — I realize that’s not what you’re asking about here, but it’s a step in that direction 🙂

sunilmut commented Apr 21, 2017

@joowdx — Thanks for your post and trying WSL. Thanks @aseering for pitching in. So, I got curious as to what is this tool is using that is not implemented. And, it looks like a bunch of SIOCGxxxxx IOCTL’s. Here is a snippet from the strace. Would you mind opening a User Voice ticket for this? We use User voice page to help us prioritize future work, depending on the demand.

joowdx commented May 2, 2017 •

Thanks @aseering. Maybe i’ll just have to wait for the real update 🙂 Can’t stand having a test build as my main OS.

I tried searching and find somewhat similar request here. And thank you @sunilmut

edit: I was wrong. that link only requests for /dev devices or storage devices if i’m not mistaken but as @aseering have said, if recent insider builds have now access to serial ports then maybe it’s not a problem for wifite or any similar tools anymore since you can just simply use usb dongles.
I want to try it myself though.

ahrherrera commented Oct 24, 2017

Hi, still in Windows 10 Fall Creators Update wifite is not recognizing wireless interfaces. Should I enable manually? In that case, how?

andb0t commented Aug 22, 2018

Has there been any progress on this? Unfortunately, personally, I’m not a WSL/windows expert, so I think I cannot contribute. But I would greatly appreciate if this were fixed/implemented 😉

jrgarga commented Sep 21, 2018

aseering commented Sep 21, 2018

Hi! I don’t work at Microsoft, but their suggestion above is to follow up on this via UserVoice.

Alword commented Oct 28, 2018

therealkenc commented Oct 28, 2018 •

Be sure to post the use case over in UserVoice (sic), because it helps/matters, versus just voting or (sigh) +1ing. For example, the ask here was for wifite, which is (a) defunct and (b) probably not going to garner a MSFT/WSL priority rush due to its nature. People on UserVoice right now are basically variation #1349. If you want 802.11 capture install WireShark on Windows and away you go. But it is hard to square «I’m new to Windows/WSL» a couple of posts back with «I want to do OSI layer 2 instrumentation» in the same breath. So I think there is some disjoint here. Maybe there are some use cases (not saying there isn’t) but » iwlist wifi0 ap» isn’t a use case, it’s a command. Start the sentence with «I am trying to. [end result you’re trying to accomplish]». «Pen testing» isn’t a use case either; it’s a general statement that doesn’t say what one is trying to accomplish. «I’m trying to get my neighbor’s WiFi key» is actually a perfectly valid answer. But there’s perfectly good ways to do that on Windows already, so.

Источник

[Fixed] No WiFi Adapter Found in Kali Linux

When we install Kali Linux on Desktop or Laptop we didn’t connect it with Wi-Fi.

Sometimes internal WiFi adapter not found in our Kali Linux system. In this detailed post we learn how we can install Wi-Fi in Kali Linux.

If we have Desktop computer then we should use the Wi-Fi adopters. This usually doesn’t need to install drive, if need then we should go the manufacturer’s website searching for drives in Linux. Have a Laptop then try following.

Laptop PC’s comes with on board Wi-Fi. Now it becomes hard to install Wi-Fi drivers and use onboard Wi-Fi chipset when we have direct install (not in Virtual Machines). So usually beginners use the LAN cable for internet or the external Wi-Fi adapter (like Alfa card) . Those methods works finely but decrees the portability of a laptop computer.

Install WiFi in Kali Linux

Now we are going to install Wi-Fi driver in our Laptop. First of all we need a network connection with decent speed, it may be from LAN cable or from the mobile using USB tethering.

Then we open a Terminal window and update our Kali Linux by using apt update command:

It require the root password to continue. After updating we use git clone command to clone Broadcom Installer.

Usually most of the laptop works with Broadcom Wi-Fi drivers and our command will be following:

After cloning it we go to the folder using cd command:-

Then before run the automated bash script we give it permissions to run by using following command:

Then we run the bash script by applying following command:

Now it will show us some options. Here we choose (1) Install WiFi driver to automatically install and setup everything for us.

This will take some time depending on our system performance and internet speed.

Sit back and take a coffee, because it take some time.

After finishing the installation this script will restart our PC. So don’t panic if it’s restarts automatically. After boot up again it will show us the Wi-Fi connectivity in the top right corner, and now we can connect our PC with Wi-Fi network with password

Installed Wi-Fi in Kali Linux

If don’t have the password of the Wi-Fi then we can follow this tutorial. Playing with WiFi ? Fern and WiFi Pumpkin will help us to do more fun.

WiFi-Pumpkin3 on Kali Linux
In this tutorial we learned how we can install Wi-Fi driver in Kali Linux, specially on primary install in Laptop.

Using Kali Linux in daily basis? Then follow some special tips about it by reading our this article.
For more updates follow our GitHub and Twitter, and comment of any kind of problems and suggestion. We always replay.

You may like these posts

Comments

I have alpha AWUS036NH which i bought from alieexpred now the problem is ths adapter is not getting detected both in my windows machine and my linux machine ive latest version of kali linux running on my laptop but adapter is not getting detected please tell me if there is any fix .. driver issue or any thing?

make sure about what you have bought. alpha is a fake company. Alfa is is right one. If you bought alfa then it should work smoothly. If it is not working then try it on friends computer (windows or Linux whatever). If it is still not working then sorry to say you might got a defective product.

I have a Intel Wifi-6 AX200 chip in my PC and it supports monitor mode but Kali Linux does not recognize it whatsoever even though it is built into the motherboard.

What type of Kali Installation you are using? WSL or VMWare?

even after installing this i dont have wifi
i have hp laptop driver RTL8723DE what to do to get wifi driver .

Got this from HP’s website. Please follow the instructions
Realtek 8723DE wifi module & Bluetooth Linux driver available now. This is for Ubuntu but also work for Kali Linux

Hi
I am on an hp pavilion laptop and the wifi never worked after the reboot I retried several times. Not sure what to do.

Different laptop models have different types of WiFi hardware. So please try Googling this. I have found something for you.

Hii
I have installed kali on vm,and installed wireless webdriver,but now its not showing any wifi ?
Ur help ,would be really greatfull(-_-)

You can use your laptop inbuilt Wi-Fi adapter to connect internet, just go to setting of your virtual machine and in network connection I think, choose Bridged Network, connect to your Wi-Fi and start your Kali VM.

WOW it works thank you very much(i was trying it for the last time)

I got Asus machine and tried that wireless process but it did work out

Try it again. If not worked then you need to download the Wi-Fi driver from manufacturers website.

hey man i have a toshiba laptop with this adapter «Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter» couldnt get it to work any ideas??

Here we found a fix for Ubuntu, we think this will work for Kali Linux also. Check This.

i installed the software, several times and my wifi stick is connected but i still dont have wifi
(im using a vm), and i connected over bridged network but i still cant connect to wifi on my kali linux and i dont know what the problem is

It ask for username and password, after cloning. Please what should I use??

It only asks for username and password when you have type wrong GitHub URL. So please check again and type it properly.

as you say i have done all that and successfully installed but its still not showing wifi option.i have hp laptop..plz tell me something about it

what is the wifi hardware of your laptop or tell us the model, then we can help you.

Realtek RTL8723BE 802.11bgn wifi adapter and laptop model is hp-82CUGEJQ

Try following commands one after another

git clone -b extended https://github.com/lwfinger/rtlwifi_new.git
sudo dkms add ./rtlwifi_new
sudo dkms install rtlwifi-new/0.6

If these does not works then try this for newer models

sudo modprobe -r rtl8723de && sudo modprobe rtl8723de

will this work in virtualbox kali linux?

This doesn’t requires in virtualbox we can simply use bridged networking to work on the same network as does your host machine.

its still no working will you give your whats app no so u can help me better plzzzzz

Hi Manish, Give your WhatsApp no. Our team members will contact you.

I am using Dell latitude, please I did as instructed, the WiFi is still not working

This tutorial is specially for broadcom wifi module (most of laptops come with this). But some model of brands may have other type of modules. In that case you need to contact your laptop manufacturing brand for the wifi driver of Linux.

help me. saya sudah install kali linux 3x.tetapi masih juga gagal masalah wifi nya. help me. whatsapp me.+62 87874343609

hi,
at first when i plugged the wifi adapter (chipset- realtek 802.11n) there was no wlan0 in ifconfig or iwconfig.. then i googled and installed comapat wireless. Then i tried to run airodump-ng in monitor mode but it was not showing any network. i tried may solutions but nothing worked for me. now again when i restarted my laptop , i dont see any wlan0 in ifconfig.. please help asap

Can you please specify the brand and model number of your Wi-Fi adapter? By default external adapters goes in wlan1. Also you need to make sure that your Wi-Fi adapter supports monitor mode and packet injections. Some newer models of 802.11 doesn’t support monitor mode and packet injection (old is gold). So if you can tell us or search on internet that your brand and model is supported monitor mode and packet injection. Are you working on Virtual Machine or VMWare? Then wireless attacks doesn’t work.

hello, first of all thanks for your reply. My adapter is RTL8188FTV. I have figured out the problem of wlan0 not showing. I had to install drivers from github.. now my main problem is that it is not going in monitor mode. when i type iwconfig wlan0 mode monitor, it shows — KILLED, and after that when i input any command such as iwconfig, the whole terminal freezes and then nothing works. at first when i tried to set to monitor mode it would display like operation not permitted.. now it just shows killed and now terminal freezes and nothing works

Operation not permitted error comes when you don’t use sudo in your command. Thanks of giving your adapter’s model number. We found this on Kali forum. This describes everything you need. Hope it solve your problem. Thanks.

the link is not working

Superbbb post. Thank you all worked perfectly like thanos snap
Worked perfectly. Thank you.

hello bro my self eshwanth :
i am using bootable kali linux (live) ,wifi option is not showing and its not connecting even the bluetooth is not working . the solution which you gave above ,does it work for me ?

Yes, this will work for you. But in a live boot install everything will be erased after shutdown the system. Your settings files created etc, on the next boot you found fresh Kali as it was in the first boot. Then again you need to do everything. In this case we suggest you to use Kali Live Persistence. For installing and use Bluetooth please go through our this tutorial

i have dell inspiron 3000 laptop i follwed all steps but still the wifi is not working

What type of Kali installation you are using ? VMWare or Direct install?

My USB now show up but will not connect to anything.

I am usding wifi adeptor with chip setrealtek 802.11n NIC. I was using it in windows and now I want to use it in kali linux installed in virtual box.I have done the usb activation part but when I use it in windows it works properly but as soon as I am staring kali linux wifi adeptor is got disconnected everytime.Please help me with the problem

Here we have stopped using Virtual machines but seems like the problem comes from the Kali machine’s side. You can try installing the drivers for your WiFi card on Kali.

Hey all..I can’t see my wifi after kali linux installation..My network adapter is Qualcomm Atheros QCA9377. Pls help

Hi Vignesh, Did you installed the drivers for your Atheros QCA93377? You can download and install the suitable binary files from here.

how to use in kali linux plessssss

Hi you!
You don’t know how confused I am when the problem appear to me and I don’t know what to do.
I almost gave up coz that problem (can not connect to wifi)..
But, this article really help me, dude.
I have no word to thank to you..
Amazing! Great work! May god bless you!

This worked for me also. This guy is working well for the community.

I have RTL8822CE and I can’t get it working, already tied couple of custom drivers but they do not work.

UPDATE:
This driver seems to work -> https://github.com/lwfinger/rtw88

Glad that you fixed it by yourself.

Im new at kali, Im using Vm , kali 2020.2 && 2020.3
the laptop is connection to my wifi , but the software of kali 2 & 3 , show only that im using wired connection , i cant setup my wifi on kali , each time i used compat wifi , lead to set up the bluetooth onlyyyy , what should i do !?

In VM or Virtual machine you can’t use your in built WiFi hardware. You can use bridged networking to connect to either a wired or a wireless network from your windows host machine. To ethical hacking on nearby wifi connection you need an external wifi adapter that suooprts Kali Linux, Monitor mode and packet injection.

I even can’t connect to wireless network. I have lenovo ideapad 110 please helps me

Can you please provide more details ?

after I am entering the command ifconfig it don’t show me the wireless card name to me as i want to do penetration test

Are you running Kali on WSL or VMWare? If you don’t have primary installation then it not work. Are you using internal wifi chipset? Do you got wifi icon on your top panel?

I tried this method in Kali linux 2019 but the broadcom doesn’t seem to work for my lenovo laptop. And it shows my wirless card as Intel wireless 2895. Please help

Try the following command and show us the large output please.

lspci | egrep -i ‘wifi|wireless|intel|broadcom|realtek’

even after installing this i dont have wifi
i have hp laptop driver HP 15-Da0410tu what to do to get wifi driver ..

Hi, Veer it’s a model number of Laptop. But you need to find out about the wifi hardware. please show us the full output of following command:

lspci | egrep -i ‘wifi|wireless|intel|broadcom|realtek’

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point LPC Controller/eSPI Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723DE 802.11b/g/n PCIe Adapter

Hi again Veer,
It looks that you are using «RTL8723DE 802.11b/g/n PCIe Adapter» on your HP laptop. Now you want a Linux driver. We just do google and found the solution on HP’s website. You should check this.

Источник