Kerberos ticket как получить linux

как автоматически получать билеты керберос при входе в линукс доменным пользователем

как автоматически получать билеты керберос при входе в линукс доменным пользователем? Или подскажите где смотреть . настроил 3 мес. назад по разным мануалам . а теерь не могу припомнить где:(

Re: как автоматически получать билеты керберос при входе в линукс доменным пользователем

Замена login-a на керберизованный?

Re: как автоматически получать билеты керберос при входе в линукс доменным пользователем

по виндовым шарам ходит без паролей и с правами доменного пользователя . которым ключик получает автоматом .

Re: как автоматически получать билеты керберос при входе в линукс доменным пользователем

Не могу понять почему замена. Логинюсь доменным пользователем . но выдаётся свежий ключик керберос. и с ним по шарам по всем серверам без паролей , где можно соответственно . а не только на винлдовом PDC и BDC

Re: как автоматически получать билеты керберос при входе в линукс доменным пользователем

Поставить pam_krb5, добавить его в session часть — будут ключики.

Re: как автоматически получать билеты керберос при входе в линукс доменным пользователем

добавил в system-auth sessions required pam_krb5.so результат нулевой . 🙁

Re: как автоматически получать билеты керберос при входе в линукс доменным пользователем

Re: как автоматически получать билеты керберос при входе в линукс доменным пользователем

Источник

Настройка Kerberos-аутентификации с использованием смарт-карт

В продолжение давней темы про использование двухфакторной аутентификации в ОС GNU/Linux позвольте рассказать про схему работы и настройку аутентификации с помощью Kerberos. В этой статье мы рассмотрим процесс настройки MIT Kerberos для аутентификации пользователей по сертификатам и ключевым парам, находящимся на USB-токене. Также материалы, изложенные в статье, можно использовать для настройки аутентификации в домене Windows.

Краткое введение

Kerberos – сетевой протокол аутентификации, позволяющий передавать данные через незащищённые сети для безопасной идентификации. Ориентирован, в первую очередь, на клиент-серверную модель и обеспечивает взаимную аутентификацию – оба пользователя через сервер подтверждают личности друг друга.

Стоит отметить, что Kerberos в первую очередь является протоколом, а не конкретной системой аутентификации. Его реализации используются в различных операционных системах, в том числе и в Windows, как метод аутентификации пользователей в домене. Существует несколько open source реализаций протокола Kerberos, например оригинальная MIT Kerberos и Heimdal. Такой зоопарк возник из-за ограничений США на экспорт криптографических средств защиты информации, на сегодня эта ситуация вокруг MIT Kerberos уже улеглась. В статье мы рассмотрим процесс настройки для MIT Kerberos V5.

Терминология Kerberos

• Билет (ticket) – временные данные, выдаваемые клиенту для аутентификации на сервере, на котором располагается необходимая служба.
• Клиент (client) – некая сущность в сети (пользователь, хост или сервис), которая может получить билет от Kerberos.
• Центр выдачи ключей (key distribution center, KDC) – сервис, выдающий билеты Kerberos.
• Область (realm) – сеть, используемая Kerberos, состоящая из серверов KDC и множества клиентов. Имя realm регистрозависимо, обычно пишется в верхнем регистре и совпадает с именем домена.
• Принципал (principal) – уникальное имя для клиента, для которого разрешается аутентификация в Kerberos. Записывается в виде root[/instance]@REALM.

Файлы настроек Kerberos

На сервере:

• /etc/krb5kdc/kdc.conf — настройки KDC

На клиенте и сервере:

• /etc/kbr5.conf — настройки сервера аутентификации (описание realms, доменных имен и других настроек)

Настройка рабочего окружения

Для начала необходимо развернуть среду, в которой будет производиться аутентификация. Наиболее просто это сделать, взяв две виртуальные машины, находящиеся в одной подсети. Достаточно установить на одну виртуальную машину какую-нибудь Ubuntu (это будет наш сервер), а затем клонировать ее и получить клиента. При написании статьи я воспользовался свежей Ubuntu 12.10 (x86) и виртуальной машиной от VMWare. Чтобы виртуальным машинам было удобнее видеть друг друга по сети, стоит переключить сетевые карты в Bridged-режим.
Важно! Следите за тем, чтобы время на клиенте и сервере было синхронизировано, это необходимо для корректной работы Kerberos.

Настройка сети

Клиенты Kerberos ищут свои сервера по доменным именам, поэтому необходимо настроить DNS и убедиться, что имена серверов успешно разрешаются. В нашем примере достаточно занести доменное имя сервера в /etc/hosts, что я и сделал. Схема «сети» изображена ниже.

Установка необходимых пакетов

На сервере нам потребуются:

• krb5-kdc – сервис KDC
• krb5-admin-server – административный сервер Kerberos (он ведет контроль учетных записей пользователей)
• krb5-pkinit – модуль расширения Kerberos для аутентификации по сертификатам

На клиент надо поставить следующие пакеты:

• krb5-user – базовый набор утилит для работы клиентской аутентификации
• krb5-config – файлы настроек Kerberos
• krb5-pkinit
• libpam-krb5 – модуль PAM для использования Kerberos-аутентификации
• pcscd, opensc, libengine-pkcs11-openssl – пакеты, необходимые для работы с токенами

При установке пакетов у нас спросят настройки по умолчанию, мы будем использовать следующие:

• Default realm: AKTIV-TEST.RU
• Имена серверов (admin server и KDC): aktiv-test.ru (он же прописан в /etc/hosts на клиенте)
• Пользователь: testuser@AKTIV-TEST.RU

Настройка Kerberos

Базовые настройки

Настройка аутентификации по открытому ключу

На сервере:

Создадим ключевую пару и сертификат нашего «УЦ». Здесь мы сгененируем ключ УЦ и создадим самоподписанный сертификат с помощью openssl. В реальном мире ключ естественно надо надежно защитить от попадания в чужие руки.
Создадим ключевую пару для KDC, заявку на сертификат и выпишем его сами себе.
Здесь нам потребуется специальный файл расширений OpenSSL (pkinit_extensions), в котором будут указаны дополнительные поля сертификатов, используемых в Kerberos. В частности, мы зададим:

• Extended Key Usage (EKU) – идентификатор (OID), говорящий о том, как планируется использовать сертификат
• otherName – поле, задающее нашего принципала, для которого выписывается сертификат

После этого перенесем следующие файлы в /var/lib/krb5kdc/:

• kdc.pem
• kdckey.pem
• cacert.pem

На сервере отредактируем настройки Kerberos (файл /etc/krb5kdc/kdc.conf) для использования ключей и сертификатов сервера и УЦ:
Далее на сервере необходимо включить предварительную аутентификацию для нашего пользователя.

Дальнейшие действия будем выполнять на клиенте

Настройка PAM-аутентификации с использованием Kerberos

Ранее при настройке клиентской машины мы поставили пакет libpam-krb5. Он поможет нам выполнить аутентификацию в Kerberos при входе в систему, а также в приложениях, использующих системную аутентификацию (например login, lightdm и проч.). Для подключения модуля PAM достаточно выполнить команду
и выбрать в диалоге необходимые модули аутентификации. Для более тонкой настройки можно заглянуть в файл /etc/pam.d/common-auth и отредактировать его по желанию. Структуру файла я описывал в предыдущей статье.

Заключение

Применение протокола Kerberos для централизованной аутентификации в связке с централизованным созданием хранением и раздачей учетных записей (например, посредством каталога на базе OpenLDAP) позволяет создать «домен UNIX», полностью состоящий из машин под управлением свободного программного обеспечения. Такое решение может применяться в корпоративном секторе, а аутентификация по смарт-картам будет приятным бонусом как для администраторов, так и для пользователей сети компании.

Источник

Ubuntu Documentation

Kerberos is an authentication protocol using a combination of secret-key cryptography and trusted third parties to allow secure authentication to network services over untrusted networks. More information about the Kerberos protocol is available from MIT’s Kerberos site. Designing an Authentication System is an accessible introduction to the principals of Kerberos’ authentication scheme.

This guide aims to supplement the documentation available in the official Ubuntu documentation by re-iterating certain key concepts in more detail and providing information on network service configuration. It is directed at system administrators that need to supplement their understanding of Kerberos and its advanced configuration.

Several Kerberos implementations exist. Two common open-source implementation of the Kerberos protocol are the original MIT implementation, and Heimdal, an implementation that was created to avoid United States export regulations. These regulations are no longer a concern, and for sake of brevity, this guide will provide instructions for the MIT version. The same concepts apply to Heimdal, although the syntax of various commands is different.

Microsoft’s Active Directory is a common closed-source implementation of a Kerberos authentication realm. The following guide contains several notes that give specific configuration information for Active Directory. In an Active Directory environment, the KDC is typically one of the services provided by the Domain Controller (DC). Readers wishing to integrate with an Active Directory Domain can skip directly to the Client Configuration section.

Pre-installation Decisions

A central part of Kerberos’ trusted third party authentication scheme is the Key Distribution Center (KDC), which is a centralized repository for users’ password information. Before deploying Kerberos, a server must be selected to take on the role of KDC. Physical and network security will be critical for this server, since a compromised KDC compromises the security of the entire realm.

Selecting a descriptive name for the Kerberos authentication realm is also important. Conventionally, the realm names is the site’s domain name fully capitalized. For instance, the site example.com would conventionally use EXAMPLE.COM for its realm name.

Prerequisites

All servers and clients that participate in a Kerberos realm must be able to communicate with each other and have accurate system clocks. The following section describes how to meet these requirements.

Host Names

Each server in a Kerberos authentication realm must be assigned a Fully Qualified Domain Name (FQDN) that is forward-resolvable.

Kerberos also expects the server’s FQDN to be reverse-resolvable. If reverse domain name resolution is not available, set the rdns variable to false in clients’ krb5.conf

Note: Active Directory depends heavily on DNS, so it is likely that the Active Directory Domain Controller is also running the Microsoft DNS server package. If this is the case, verify that each server has a FQDN assigned to it before performing the tests outlined in this section.

If the server already has an FQDN assigned to it, test forward and reverse look-up with the following commands:

The output of the first command should contain the IP address of the server. The output of the second command should contain the FQDN of the server.

If the server does not already have a FQDN assigned to it and DNS services are not available, name resolution can be implemented by editing the local hosts file (typically this is located in /etc) on each server and client, adding the following line:

Test the local DNS name resolution using the nslookup technique described at the beginning of the section.

Connectivity

To verify connectivity between hosts, ping each host’s FQDN:

The output of the ping command shows successful resolution of the FQDN to an IP Address, and a sample reply from the server. A reply from the server serves as confirmation that the host and the server can communicate.

Connectivity failures while pinging the KDC’s FQDN usually point to DNS server or client configuration errors. See the Network Configuration for information on correct network settings.

Time Synchronization

The Kerberos protocol requires the time of the client and server to match: if the system clocks of the client does not match that of the server, authentication will fail. The simplest way to synchronize the system clocks is to use a Network Time Protocol (NTP) server. See UbuntuTime for details.

Note: Active Directory Domain Controllers are typically also NTP servers.

Firewalls

As with all network services, Kerberos must be allowed to pass through any firewalls between hosts. The Kerberos System Administration Manual has a detailed section on this topic.

KDC Setup

These packages are available from the Main repository. See InstallingSoftware for details on software installation, repositories and package management.

The package installation process will step through defining the basic Kerberos configuration parameters. Recommended settings are:

• disable Kerberos 4 compatibility mode
• do not run krb524d (daemon to convert Kerberos tickets between versions)
• defaults for the other settings are acceptable

The default location of the KDC’s configuration file is /etc/krb5kdc/kdc.conf. Important settings are the locations of the KDC’s data files, and the default settings for the durations that tickets are valid. The realm name must be configured; other configuration options should only be changed by knowledgable users.

Here is an example configuration file:

Kerberos uses an Access Control List (ACL) to specify the per-principal access rights to the Kerberos admin daemon. This file’s default location is /etc/krb5kdc/kadm5.acl. The default as shown below is sufficient for most realms, but additional ACLs may be necessary depending on the network configuration.

Create the Kerberos database with the following command:

Principals

Principals are entries in the Kerberos database that represent users or services on the network. Each user or service that is participates in a Kerberos authentication realm must have a principal defined in the Kerberos database.

User principals take the form principal@REALM.NAME. For instance, user tom on the EXAMPLE.COM realm should have a principal tom@EXAMPLE.COM in the Kerberos database.

Service principals take the form service/server.fqdn@REALM.NAME. For example, the FTP service on lab.example.com in the EXAMPLE.COM realm would have the principal ftp/lab.example.com@EXAMPLE.COM in the Kerberos database.

Principal names are case sensitive.

Realm Administration: kadmin

The Kerberos realm is administered using the kadmin utility. The kadmin utility is an interactive interface that allows the administrator to create, retrieve, update, and delete realm principals. kadmin can be run on any computer that is part of the Kerberos realm, provided the user has the proper credentials. However, for security reasons, it is best to run kadmin on a KDC.

An alternative program, kadmin.local, is available as well. Running kadmin.local as the root user on the KDC allows the administrator to authenticate without having an existing principal. This is generally not necessary in a properly configured environment.

To start the kadmin utility, issue the following command:

with a valid principal name. By default, the principal admin/admin has administrative rights to the realm, so to launch kadmin as the realm administrator, use:

Type ? and press Enter at the kadmin prompt to see a list of valid commands.

Common tasks

The default realm name is appended to the principal’s name by default

• Delete a user:

The default realm name is appended to the principal’s name by default

• Delete a user:

Publish Realm Info Via DNS

Client configuration can be simplified by publishing information about the Kerberos realm via DNS. This is accomplished by adding SRV records that point to the Kerberos KDC.

To do this in a DNS zone controlled by BIND requires entries like the following. Here the DNS domain is example.com, and the Kerberos realm is EXAMPLE.COM.

See BIND9ServerHowto for information on configuring DNS services with BIND.

With this DNS configuration in place, it should not be necessary to add information to the /etc/krb5.conf on client computers: the Kerberos software should get all necessary realm information from the DNS server. The kadmin utility still seems to require the [domain_realm] mappings, though.

Client Configuration

Note: Verify the clients meet the criteria laid out in the Prerequisites section before installing client software.

Package Installation

Kerberos services and utilities require several separate packages:

krb5-user: Basic programs to authenticate using MIT Kerberos.

krb5-config: Configuration files for Kerberos Version 5.

libkadm55: MIT Kerberos administration runtime libraries. (No longer available in Karmic)

These packages are available from the Main repository. See InstallingSoftware for details on software installation, repositories and package management.

Configuration

krb5-config

The krb5-config installation process customizes the /etc/krb5.conf file. Supply your realm name when prompted to enter a default realm. If Kerberos SRV records aren’t available via DNS, the installation process will prompt for basic information about the Kerberos realm:

Substitute the FQDN of the KDC for the example answers.

Manual configuration: /etc/krb5.conf

It is also possible to configure the Kerberos client manually by editing /etc/krb5.conf. This approach allows greater customization of the file, but lacks the automation of the krb5-config package. The end result is the same. The following is a sample configuration.

Testing

To test the operation of Kerberos, request a Ticket-Granting Ticket (TGT) with the kinit command, as shown. Any valid Kerberos principal can be substituted for «Administrator». Omit the realm name from the command if the default_realm directive is properly specified in the /etc/krb5.conf file or DNS SRV records.

Note: The realm name is CASE SENSITIVE.

Use the klist command to verify the TGT is valid:

If the above tests work, congratulations! You have successfully obtained a Kerberos ticket. This ticket can be used to access network services that use Kerberos for authentication.

The kinit program will attempt to obtain a TGT for the principal @REALM.NAME if run without a ‘-p’ argument where is the username of the local user, and REALM.NAME is the name of the default realm as configured in /etc/krb5.conf

Release the test ticket by issuing the kdestroy command.

Kerberizing Local Authentication

Kerberos is frequently used as a source for local authentication through the pam-krb5 module. Adding this module to a host’s PAM stack allows users to authenticate to the local host using their Kerberos password. Given a username and password, pam-krb5 will check the supplied password against the password for principal @REALM.NAME. The pam-krb5 module will inform the local system that the user authenticated successfully if the supplied password matches the password of the principal.

The module also establishes a credentials cache when a user has authenticated successfully, allowing the user to utilize Kerberized network services without entering their credentials a second time.

Installation

Note: Before deploying Kerberized PAM authentication, make sure that each each user has a valid account, either on the local host (via adduser or similar), or through a shared source such as LDAP.

To install the pam-krb5 PAM module, issue the following command from a command prompt:

Configuration

In Ubuntu release 9.04 (Jaunty Jackalope) and newer, the details of PAM configuration are handled by the pam-auth-update utility. To enable or disable Kerberos authentication, run pam-auth-update from a command prompt. More information on pam-auth-update is available in its documentation.

For releases prior to Jaunty, a basic configuration can be implemented by adding the following line to the top of the stack in /etc/pam.d/common-auth:

PAM is a highly configurable framework; consult the PAM documentation for more information on advanced configuration options, such as falling back on local password services.

Credential Caching

For roaming hosts such as laptops that may not always have access to the KDC, it is useful to cache credentials using the libpam-ccreds package. Installation is simple:

Configuring Network Services

Once a user has obtained a TGT using kinit, they can use it to prove their identity to a network service such as file sharing or printing. This authentication process is automatic: no password is required to access network services as long as the user’s TGT is valid (for security purposes, tickets expire after a period of time, and must be renewed).

Services use files called keytabs that contain a secret known only to the service and the KDC. The user authenticates themself to the KDC, and then requests information from the KDC that is encrypted using the service’s shared secret. This encrypted message is sent to the client, which sends it to the service. If the service can decrypt and read the message (and the user passes other security checks), the service accepts the user’s identity.

Generating Keytabs

To create a service keytab, first create a service principal of the form service/host.fqdn@REALM.NAME using kadmin. For example, an FTP service on lab.example.com in the EXAMPLE.COM realm would have a principal named ftp/lab.example.com@EXAMPLE.COM, and would be added like this:

The realm name is optional if the principal is part of the default Kerberos realm as configured in krb5.conf.

Once the principal has been created, create or add to a keytab with the ktadd command in the kadmin interface. To create a keytab for the FTP service from the preceeding example, the command would look like this:

Note: the user running kadmin must have write access to the path specified by the -k argument.

As before, the realm name is optional for principals in the default realm. The keytab’s path is also variable, although keytabs typically reside in the host’s /etc directory.

It is not necessary to generate the keytab on host for which the keytab is intended. For example, one could simply generate the keytab as indicated on the KDC, save it in a temporary location, and securely transport it (encrypted transport such as scp, or physically via Flash drive) to the intended host.

Security

» height=»16″ src=»/moin_static198/light/img/icon_cool.png» title=»Info » width=»16″/> The security of a keytab is vital: malicious users with access to keytabs can impersonate network services. To avoid this, secure the keytab’s file permissions with chmod (this is a system command, not a kadmin command). Using the FTP example, the command looks like this:

The file ownership may also require adjustment to allow access by the FTP daemon.

Service Configuration

Once the keytab is generated, the service must be configured to use it. Consult the documentation of the software package for details on this configuration process.

Remote Login

The «host» service is the name of the service provided by remote access services such as telnet or SSH. To support Kerberized remote login:

Create a service principal with the name host/client.fqdn@REALM.NAME (e.g. host/lab.example.com@EXAMPLE.COM.

Save a keytab for this principal in /etc/krb5.keytab

Set the file permissions to 0700 and change the owner to root:

Configure the remote access service to use Kerberos. Refer to the service’s documentation for instructions.

Apache

Apache supports Kerberized authentication via mod_auth_kerb. The basic configuration utilizes Apache’s Basic Auth mechanism. Transport layer encryption (i.e. SSL/TLS) should be deployed if the basic configuration is used; the Basic Auth mechanism does not encrypt login credentials during transmission. 1

It is also possible to configure web browsers to use an existing credentials cache (instead of requiring a user to re-enter their Kerberos username and password) by enabling GSSAPI SPNEGO. Transport layer encryption is not necessary if SPNEGO is used, but the client’s browser must be properly configured.

Server

1. On the Kerberos KDC, create a principal and generate a keytab for the web server:
2. Securely transport the keytab to the webserver
3. On the webserver, set the keytab’s permissions and ownership:
4. Install mod_auth_kerb:

Update the Apache configuration file (generally available in /etc/apache2/sites-enabled/). Here access is restricted to /var/www.

Browser

To utilize existing an existing credentials cache (generated by kinit or a SSO login), the client’s browser must be configured to use GSSAPI SPNEGO. https://docs.spring.io/spring-security-kerberos/docs/current/reference/html/browserspnegoconfig.html provides configuration details for popular browsers.

Integration with SASL

Several popular open source software packages (most notably OpenLDAPServer) use Kerberos as an authentication source via the SASL pluggable authentication framework. The following section describes how to install and configure SASL, and verify it is utilizing Kerberos correctly. The details of configuring a service to utilize SASL depend on the package; refer to the service’s documentation for details.

Package Installation

We will need the SASL pluggable authentication framework, and the GSSAPI module for the Kerberos implementation in use. Here the MIT implementation is used. Run the following command on the server:

Setup

1. Create a Kerberos service principal. Follow the naming conventions outlined in the Principals section.
2. Generate a keytab for the service principal and securely transfer it to the server running the service. Restrict the keytab’s file permissions as necessary.

Configured the service to access the correct keytab. Many services will use the system keytab ( /etc/krb5.keytab) by default. If the keytab for the service principal is not stored in the system keytab, the service must be configured to read the correct keytab. This is generally done by setting the environment variable KRB5_KTNAME:

This command can often be added to the service’s startup procedure by adding it to the service’s defaults file in /etc/default.

Test and Troubleshoot

Configuration issues are common at this stage, so a test is in order, using the SASL sample client and server.

1. Make sure the user running the sample server has permission to access to the appropriate keytab. If the keytab for the service principal is stored in a file other than the default system principal (/etc/krb5.keytab), you will need to set the environment variable KRB5_KTNAME:
2. Start the SASL sample server on the server with the GSSAPI mechanism and the specified service:

In a separate terminal on the server, initialize a credentials cache for a user using kinit:

In the same terminal, start the SASL sample client: Replace «servicename» with the name of the service that is being tested.

Copy the line beginning with «S: » from the server window to the client window and hit Enter. The client will generate a line beginning with «C: » that must be copy/pasted into the server window. This exchange must be repeated several times. The process should completely with no errors. Here is an example of a successful run from the server side (some lengthly strings elided): The same run, from the client’s side:

Address any error messages before continuing. The Troubleshooting section of http://mah.everybody.org/docs/sasl-gssapi/ contains several common failure modes and their solutions.

Repeat the same process with the sample server running on the server and the sample client running on a host that will need to access the service.

Troubleshooting

Kerberos is fairly fault-tolerant, if the requisite services are in place. If Kerberos authentication fails, check the following:

The user has a valid ticket (use klist).

Basic network connectivity is available (use ping).
Forward DNS hostname lookup succeeds on both the KDC and the local machine.

Reverse DNS lookup succeeds on both the KDC and local machine, or rdns is set to false in krb5.conf
The clocks of the KDC and local machine are synchronized.

The file permissions for various critical files such as /etc/krb5.keytab are correct and accessible by the user or service in question. sudo -u can be helpful for this.

Following the KDC logs while attempting an operation can also be very informative. The following lines in /etc/krb5kdc/kdc.conf will enable KDC logging:

If you had to edit kdc.conf to enable logging, restart the KDC to apply the changes:

Once logging is enabled, you can follow the log while attempting an operation:

Backup and Restore

To backup the Kerberos database:

Further Reading

The Ubuntu Server Guides from the official Ubuntu documentation provide a great deal of useful information.

OpenSSH & Kerberos A detailed guide to SSH authentication with Kerberos.

Acknowledgements

Parts of this document are derived from the SingleSignOn and Samba/Kerberos documentation. Many thanks to the authors of both documents.

Kerberos (последним исправлял пользователь enlightened-despot 2021-03-07 05:40:04)

The material on this wiki is available under a free license, see Copyright / License for details
You can contribute to this wiki, see Wiki Guide for details

Источник