Kingston datatraveler windows driver

Unfortunately this unit does not have any security or write protection features. If you receive a write protection message with this drive, check for the following:

1. Verify that you are allowedto write to removable storage devices. There may be a securitysetting in the OS that disables write access to removable storage devices.
2. Make sure you have notenabled write protection on the drive by using a third party software.
3. If none of the above apply,the drive may be defective. Contact Kingston TechnicalSupport for further assistance.

To transfer files larger than 4GB, the DataTraveler must have a NTFS or exFAT file system. Unfortunately, the FAT32 file system is not capable of handling a single file larger than 4GB (to be exact, one byte less than 4GB). Follow the steps below to format the DataTraveler with an NTFS File system:

Warning, all data on the DataTraveler will be lost! Please back up the data on the DataTraveler before proceeding.

1. Locate My Computer(Computer in Vista and 7). Right-click on the Kingstondrive and select Format.
2. Select NTFS or exFAT fromthe file system drop-down list.
3. Select Quick Format as theFormat option and click Start.
   Note: If NTFS is not an availableoption, close the Format window and follow steps 4-9.
4. Right-click My Computer(Computer in Vista) and select Properties.
5. Select the Hardware tab andclick Device Manager.
6. Expand Disk Drives andright-click on the Kingston drive. Select Properties.
7. Click on the Policies taband select «Optimize for performance”.
8. Click OK.
9. Repeat steps 1-3.

Be aware that MacOS 10.6.5 will support full read and write access to exFAT formatted drives. MacOS still has read only access to NTFS formatted drives.

Some devices (MP3 players,digital photo frames, etc) will not read NTFS or exFAT file systems.

Also, Windows XP and Vistawill require an update in order to access exFAT.

You may have formatted the drive with an exFAT file system while using Windows 7. In order to resolve this, reformat the drive with the FAT32 or NTFS file system. You may also be able to update your operating system to be compatible with exFAT. However, be aware that some devices (MP3 players, digital photo frames, etc) will not read the exFAT file system.

If you have data on the DataTraveler that is important to you, we strongly recommend that you use one of the two possible means of data recovery (see below). Kingston does not offer data recovery services. For more information on ourwarranty policy, please visit http://www.kingston.com/company/warranty.asp

1. Contact a company thatspecialises in data recovery services, such as Driver Savers at www.drivesavers.com or Ontrack at www.ontrack.com or carry out a Googlesearch for «data recovery».
2. Go to www.download.com, search for «datarecovery» and download one of the many utilities for data recovery whichare fairly simple to use. We suggest trying one of the free versions as they work just as well as the paid versions. However for this option to work, the computer must assign a drive letter to the device. Even so it is not guaranteed to work. If it does not, option 1 would be your best bet.

Some of the flash storagedevice’s listed capacity is used for formatting and other functions and is notavailable for data storage. Therefore, you will not see the full capacity.

When a flash storage device is manufactured, steps are taken to ensure that the device operates reliably and permits the host device (computer, digital camera, PDA, etc.) to access the memory cells; i.e., to store and retrieve data on the flash storage device. These steps, loosely called «formatting», use some of the memory cells within the device and thus reduce the capacity available for data storage by the end user.

Formatting includes the followingoperations:

1. Testing each memory cell inthe flash storage device.
2. Identifying all defectivecells and taking steps to ensure that no data will be written to or read from adefective cell.
3. Reserving some cells to serve as «spares.» Flash memory cells have a long but finite lifetime. Therefore, some cells are held in reserve to replace any memory cells that may fail over time.
4. Creating a File AllocationTable (FAT) or other directory. To enable flash storage devices to store and access customer files conveniently, a file management system must be created to allow any device or computer to identify the files stored in the flash storage device. The most common type of file management system for flash storage devices is the File Allocation Table (FAT), which is also used on hard drives.
5. Reserving some cells foruse by the flash storage device’s controller, e.g., for storing firmwareupdates and other controller-specific information.
6. Where applicable, reservingsome cells for special features. For example, thespecification for Secure Digital (SD) cards requires reserved areas to supportspecial copy protection and security features.

Operating System	exFAT support	Patch download
Windows 7	Supported natively
Windows Vista	Requires update to Service Pack 1 or 2 (both supports exFAT)	Download Service Pack 1 (with exFAT support) Download Service Pack 2 (with exFAT support)
Windows XP (Service Pack 2 or 3)	Requires exFAT patch update	Must have Service Pack 2 or 3 installed to use this update Download exFAT patch update
Mac OS X	Requires Mac OS X version 10.6.6 and above

Yes, this DataTraveler issupported by Linux as long as you have Linux Kernel 2.6.x and above.

Please note: If the DataTraveler comes with software, it will not function with Linux. Only the drive itself is compatible with Linux.

To resolve this, make sure to insert the drive directly into the USB ports located on the computer. The USB ports found on the keyboard and some hubs may not supply sufficient power to operate the Kingston DataTraveler properly. Also, go to Finder>Preferences>Sidebar and ensure that CD, DVD and iPod and External Disks are selected.

1. The DataTraveler could be conflicting with a pre-assigned drive letter. To resolve, do the following (Do not do this for a «Privacy» drive that assigns two drive letters):

1. Insert the DataTraveler and open «Control Panel». Then open «Administrative Tools».
2. Open Computer Management
3. Select “Disk Management” on the left window pane.
4. Locate the DataTraveler on the right window pane.
5. Right-click on the drive and select “Change Drive Letter and Paths.”
6. Click Change and select a new drive letter from the drop-down box. Then click OK.

2. The DataTraveler may be conflicting with pre-installed software. Disable all applications running in the background prior to installation of the Data Traveler.

3. Make sure Windows, any USB controller drivers and the system BIOS for you computer is up to date.

4. If you have a desktop computer, make sure the DataTraveler is inserted directly into one of the main USB ports on the back of the PC. Front ports, keyboard ports or USB Hubs may not supply sufficient power for the High Speed DataTraveler to function properly.

5. Check for a possible conflict is another USB device such as a printer or USB card reader. Unplug the other USB device, insert the DataTraveler drive and restart the system. After the DataTraveler is configured you should then be able to connect the other USB device.

Windows assigns new drives to the next available physical drive. It will sometimes take the same drive letter as a network drive for this reason. This is a common problem with removable storage devices.

To resolve this go to Control Panel > Administrative Tools > Computer Management. Note the drives on the right window pane. See if the Kingston (x) is recognised. (x) denotes the drive letter that Windows assigned to the Data Traveler.

If the DataTraveler isusing the same drive letter as one of the other drives, right-click theKingston Drive letter and click on «Change Drive Letter and Paths».

In the next dialog box,click on the «Change» button and assign a drive letter that is notcurrently being used.

Note: Do not manually change drive letters if you have a «Privacy» DataTraveler that assigns two drive letters for the device.

On Macs, you first have to empty the trash can in order to regain the space. You may have to plug the drive back in after emptying the trash.

If this does not work then the device should be completely reformatted. Please follow these instructions for formatting your Kingston device.

WARNING: Formatting will erase all your data so please make sure you have a copy before proceeding.

1. Go to Go > Applications > Utilities and Open Disk Utility.
2. Choose your drive from theleft panel and then click Erase on the right.
3. Select a Volume Format.Choosing MS-DOS File System will allow the drive to work on the Mac and Windows operating systems. If used only in a Mac then select Mac OS Extended as the Volume Format.
4. Click Erase.

Because the DataTraveler is 32GB or larger, Windows 7 will not allow you to format it to FAT32. You will have to convert it using a Command Prompt. Click on Start>Run and type in CMD and click on the OK button. Type the following in the command prompt (see image). Replace F with the drive letter for your drive. Please take notice of the spaces in between.

This happens if the DataTraveler has been formatted with Microsoft Windows NTFS. To resolve, format the DataTraveler with Mac OS X using MS-DOS File System.

To format the DataTraveler with Mac OS 10.3.X, do the following:

1. Click on the «GO» option on the menu bar.
2. Double-click on «Utilities» (If you do not see Utilities, double-click on Applications and then double-click on the Utilities folder.)
3. Double-click on the «Disk Utility» icon.
4. On the Disk Utility Dialog box, click once on the Kingston DataTraveler active partition.
   Note: There will be two listings for the Data Traveler, the first one is the active partition and the second is the volume label.
5. Click the erase tab located on the right side of the screen.
6. Using the Volume Format drop-down, select «MS-DOS File System» from the list.
7. Click Erase.

Be aware MacOS 10.6.5 will support full read and write access to exFAT formatted drives. So formatting the drive using exFAT file system may also resolve this problem. MacOS still has read only access to NTFS formatted drives.

Some devices (MP3 players, digital photo frames, etc) will not read NTFS or exFAT file systems.

Also Windows XP and Vista will require an update in order to access exFAT.

For additional assistance using the Data Traveler, please visit http://www.kingston.com/support/howtodt/default.asp to view the DataTraveler «How To» videos.

Follow the steps below toformat the DataTraveler with an NTFS File system using a Windows PC.

Note: Admin rights are required.

1. Remove all other externalflash devices from your computer.
2. Right-click My Computer(Computer in Vista) and select Properties.
   Note: If User Account Control isenabled in Windows Vista, an alert will display. Click Continue to proceed.
3. From the right side window,double-click Storage and then double-click Disk Management.
4. From the right side window,right-click the Kingston (Removable) drive and select Format.
   Note: You may receive a warning: «This is the active partition on this disk. All data on the partition will be lost. Are you sure you want to format this partition?» Click Yes to proceed.
5. In the Format window,select the “NTFS” file system and select the box next to “Perform a quickformat”. Click OK.
6. Click OK on the Format Warning window.

The Kingston (Removable) drive window will display «Formatting» while the drive is being formatted. Once the format is complete, the status will revert to «Healthy».

ReadyBoost is a Windows Vista and Windows 7 feature which has the ability to use USB flash drive storage space to improve system performance. The DataTraveler does not support Windows ReadyBoost.

Windows may not recognise the MacOS Extended or Standard file system. To resolve this, format the drive in MacOS DOS so that it can be used in both environments.

WARNING: Formatting will erase all of the data on the DataTraveler. Back up your data before proceeding.

1. Insert the DataTravelerinto the Mac OS X machine and wait for it to mount.
2. Click on the “GO” option onthe menu bar.
3. Double-click on Utilities(If you do not see Utilities, double-click on Applications and thendouble-click on the Utilities folder.)
4. Double-click on the DiskUtility icon.
5. In the Disk Utility Dialogbox, click once on the Kingston DataTraveler active partition. Note: There will be two listings for the DataTraveler, the first one is the active partition and the second is the volume label.
6. Click the Erase tab locatedon the right side of the screen.
7. Using the Volume Formatdrop-down, select “MS-DOS File System” from the list.
8. Click Erase.

Be aware that MacOS 10.6.5 will support full read and write access to exFAT formatted drives so formatting the drive using the exFAT file system may also resolve this problem. MacOS still has read only access to NTFS formatted drives.

Some devices (MP3 players,digital photo frames, etc) will not read NTFS or exFAT file systems.

Also, Windows XP and Vistawill require an update in order to access exFAT.

For additional assistance using the DataTraveler, CLICK HERE to view the DataTraveler «How To» videos.

Although it is possible to boot from the DataTraveler, it is not a feature Kingston supports.These drives are intended as storage devices.

Contact Technical Support

Questions about a Kingston product you already own? Ask a Kingston expert.

Email Technical Support

Complete a short form for prompt resolution

Kingston DataTraveler 2.0 USB Device Drivers Download

Download the latest version of the Kingston DataTraveler 2.0 USB Device driver for your computer’s operating system. All downloads available on this website have been scanned by the latest anti-virus software and are guaranteed to be virus and malware-free.

Find All Kingston DataTraveler 2.0 USB Device Drivers

Popular Driver Updates for Kingston DataTraveler 2.0 USB Device

Kingston DataTraveler 2.0 USB Device Driver Update Utility

Microsoft Generic Storage device, USB Mass Storage Driver Driver

Submitted Jul 9, 2009 by Eduardo Mozart (DG Member):
«Ah, oi! — Bem, este é o driver genérico para dispositivos USB, geralmente sistemas mais antigos não aceitam USB, com esse driver, sistemas como o Windows 95/98 poderão ler qualquer disco/unidade USB com driver genérico, *—*’ — Os drivers que acompanham esse arquivo são estes: ‘-‘ — — Microsoft Generic . «

KUSBHS2/XX Driver

Submitted Aug 14, 2004 by Vinod (DG Staff Member):
«KUSBHS2/xx USB DataTraveler 2.0 Hi-Speed — Windows Millenium, Windows 2000 and Windows XP ship with drivers for this device. Drivers for Windows 98 are included in this file.«

KUSB/XX Driver

Submitted Aug 14, 2004 by Vinod (DG Staff Member):
«KUSB/xx USB DataTraveler — Windows Millenium, Windows 2000 and Windows XP ship with drivers for this device. Drivers for Windows 98 are included in this file«

KUSBDTI/XX Driver

Submitted Aug 14, 2004 by Vinod (DG Staff Member):
«KUSBDTI/xx USB DataTraveler I — Windows Millenium, Windows 2000 and Windows XP ship with drivers for this device. Drivers for Windows 98 are included in this file.«

3_50drivers Driver

Submitted Mar 5, 2007 by Malathy (DG Staff Member):
«3_50drivers — Network Drivers for Vista«

infiles.zip Driver

Submitted Mar 26, 2004 by DriverGuide (DG Staff Member)

• Updates PC Drivers Automatically
• Identifies & Fixes Unknown Devices
• Supports Windows 10, 8, 7, Vista, XP

Recent Help Articles

Popular Utilities

If you have had recent power outages, viruses or other computer problems, it is likely that the drivers have become damaged. Browse the list above to find the driver that matches your hardware and operating system. To see more matches, use our custom driver search engine to find the exact driver.

Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for Kingston DataTraveler 2.0 USB Device. It is a software utility that will find the right driver for you — automatically.

DriverGuide maintains an extensive archive of Windows drivers available for free download. We employ a team from around the world which adds hundreds of new drivers to our site every day.

How to Install Drivers

Once you download your new driver, then you need to install it. To install a driver in Windows, you will need to use a built-in utility called Device Manager. It allows you to see all of the devices recognized by your system, and the drivers associated with them.

Open Device Manager

In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager

In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose «All Apps» -> swipe or scroll right and choose «Control Panel» (under Windows System section) -> Hardware and Sound -> Device Manager

In Windows 7, click Start -> Control Panel -> Hardware and Sound -> Device Manager

In Windows Vista, click Start -> Control Panel -> System and Maintenance -> Device Manager

In Windows XP, click Start -> Control Panel -> Performance and Maintenance -> System -> Hardware tab -> Device Manager button

Install Drivers With Device Manager

Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.

Select the Driver tab.

Click the Update Driver button and follow the instructions.

In most cases, you will need to reboot your computer in order for the driver update to take effect.

Visit our Driver Support Page for helpful step-by-step videos

If you are having trouble finding the right driver, stop searching and fix driver problems faster with the Automatic Driver Update Utility. Many computer problems are caused by missing or outdated device drivers, especially in Windows 10. If your deskttop or laptop is running slow, or keeps crashing or hanging, there is a good chance that updating your drivers will fix the problem. Automatic updates could save you hours of time.