Kon-Boot — это прикладная программа, которая изменяет содержимое ядра Windows во время загрузки, обходя систему авторизации Windows и позволяя войти в защищенную паролем учётную запись без ввода пароля. Ваш любимый пароль при этом не перезаписывается, а при перезагрузке Windows оригинальное содержимое её ядра и процедура авторизации восстанавливаются. Kon-Boot загружается с floppy/cd/usb, работает в тихом автоматическом режиме. Всё, что нужно для входа в защищенную паролем учётную запись Windows — это создать загрузочный носитель с Kon-Boot (или интегрировать утилиту в вашу мультизагрузочную сборку, использующую загрузчик grub), вставить носитель с Kon-Boot в компьютер/устройство с Windows и загрузиться с этого носителя. Провести техдиагностику после ремонта, спасти данные или проверить систему безопасности — легко, просто, быстро!

Изменения в версии 2.7:

Поддерживаемые операционные системы:
Microsoft Windows
• Microsoft Windows XP 32Bit/64Bit (all versions since SP2)
• Microsoft Windows Server 2003 32Bit/64Bit (all versions)
• Microsoft Windows Server 2008 32Bit/64Bit (all versions)
• Microsoft Windows Vista 32Bit/64Bit (all versions)
• Microsoft Windows 7 32Bit/64Bit (all versions including EFI)
• Microsoft Windows 8 and 8.1 32Bit/64Bit (all versions including EFI, local and online authorization)
• Microsoft Windows 10 32Bit/64Bit (all versions including EFI, local and online authorization)
macOS
• macOS High Sierra OSX 10.13
• macOS Sierra OSX 10.12
• OSX 10.11
• OSX 10.10
• OSX 10.9
• OSX 10.8
• OSX 10.7
• OSX 10.6

Скачать программу Kon-Boot 2.7 (16 МБ):

Как зайти в Windows 10 не зная пароля используя kon-boot 2.5

Приветики мои хорошие. Давно не писал статей, так как нанял копирайтера, статьи которого Вы можете читать на моём сайте. А вот люди заставляют меня это сделать и написать статью, как взломать Windows 10. Сразу скажу, что способ, который используется не всегда сработает и не сработает, если вы пользуетесь учёткой Microsoft, пока. Но я всё же ещё раз расскажу и опишу использование конбута с флешки.

Покупаем kon-boot на официальном сайте. Если нет бабосиков, а кон-бут нужен, то берём магнитик и даём его покушать своему п2п-клиенту. После того, как у Вас появился заветный архивчик – продолжаем.

Подготавливаем флешку, сохраняем нужные файлы, так как флешка будет отформатированна, но потом файлы можно вернуть, и использовать флешку как обычно, но с возможностями конбута.

Распаковываем архивы два раза (пароли 123456), пока не получим папку в которой будут файлы:

kon-bootCD\
kon-bootFLOPPY\
kon-bootUSB\
eula.txt
KonBootInstaller.exe
konbootWIN_guide.pdf

Вставляем флешку и вытаскиваем другие, если вставленны.

Запускаем от имени администратора файл KonBootInstaller.exe, и подтверждаем, что всё сотрётся с флешки, и мы вытащили другие флешки.

Выбираем нужную флешку в поле Available USB Drive

Нажимаем на Install to USB stick (With EFI support) и ещё раз подтверждаем, что всё сотрётся с флешки.

Ждём нажимаем ОК.

Флешка с конбутом готова к использованию.

Предупреждения:

• не будет работать если Windows 10 использует онлайн учётную запись Microsoft, пока только локальную учётку обходит
• не будет работать если в ноутбуке в биосе включен режим Security Boot, у всех брендов по разному этот пункт называется
• не со всех портов USB будет работать
• не с первого раза может работать
• пароль обходит, а не стирает, при обычной загрузке будет всё как раньше

Пора взламывать пароль и обойти его с помощью нашей подготовленной флешки. Вставляем флешку в порт USB, лучше если это будет порт версии 2, а не 3, и если это системник, то лучше вставить флешку сзади.

Включаем аппарат и выбираем загрузку с флешки, нажав клавижу вызова бутменю. У разных брендов это разная клавиша: Esc, F8, F9, F12.

Появляется меню конбута с выбором разных версий: 2.1 и 2.5 – текущая верхняя. Подтверждаем выбор и продолжаем загрузку.

Если всё сделали чётко, то обойдёте пароль Windows 10, если не получилось пробуйте, вот видосик в помощь:

Kon-Boot for Windows Official GUIDE

If you have purchased Kon-Boot for Windows or Kon-Boot 2in1 license this is the right place for you.

What’s Kon-Boot for Windows?

Kon-Boot (aka kon boot, konboot) is an application which will silently bypass the authentication process of Windows based operating systems. Without overwriting your old password! In other words you can login to your Windows profile without knowing your password. Easy to use and excellent for tech repairs, data recovery and security audits. Fast, tiny and gets your job done!

Kon-Boot in action:

How to purchase?

Kon-Boot is currently the only solution on the market which can securely bypass Microsoft Windows / Appple macOS passwords.

We are doing our best to still improve Kon-Boot and we need your support to keep doing that. If you haven’t purchased Kon-Booot already feel free to do so, thanks for your support!

After the purchase download link will be sent to your paypal associated e-mail.

Changelog

System Requirements

Pentium III compatible processor, 100MB free space on the hard drive. USB flash drive (prefered USB pendrive size is 16GB), keyboard. Compatibile BIOS version. Windows system is required for installer to run. USB flash drive is required for the UEFI version to work. Internet connection is required for the installer to work. Kon-boot can be only installed by using the original installer. One kon-boot license permits the user to install kon-boot on only one USB device (USB pendrive).

Not supported: Disk encryption, secure boot must be disabled., tablets and tablet hybrids, multiple operating systems installed on target computer, 3rd party loaders are supported, kernel debuggers, virtualization software (VMware, QEMU, VirtualBox) is not supported. CD and Floppy versions are deprecated.

Since version 2.7 kon-boot CD version is no longer available. We have left the old .iso images just for compatibility purposes. All versions starting from kon-boot 2.7 can be installed only on USB media.

Supported operating systems:

Important: Since kon-boot 2.7 there is a new feature present called automatic powershell script execution. This feature is present only in COMMERCIAL LICENSES (UEFI mode only (Windows 8 x64 / Windows 10 x64)).

Notable differences between personal and commercial version

Installation to USB

Since version 2.7 kon-boot can be installed only by using our GUI installer. Internet connecton is required for installer to work. Please note that all other installation options like CD installation are depracated (older kon-boot version is included in the package for compatibility reasons or in case of temporary lack of Internet connection).

We recommend using USB pendrive with less than 16 GB capactity, although it is not necessary (some older BIOSes have problems with kon-boot loading from larger USB pendrives).

Please use USB pendrive manufactured by reputable company like KINGSTON, SANDISK, SONY. Please don’t use USB pendrives from «NO-NAME» companies — they may cause problems on various BIOSES.

Following video presents installation to USB pendrive media:

Manual installation to USB

Available for kon-boot v2.6 (if you use this feature in kon-boot v2.7 the older version (2.6) will be installed)

• Your BIOS need to be configured to start from the USB media. If you don’t know how to configure your BIOS please check external video tutorials — here
• USB thumb drive (FAT32 filesystem)

Please note: files located on your USB thumb drive may be overwritten! Installation steps:

1. Insert your target USB pendrive
2. If you are using Windows Vista or newer system please right click on «usb_install_RUNASADMIN.bat» and pick «Run As Administrator» option. Otherwise just double click on «usb_install_RUNASADMIN.bat» file (bat files are located in the «kon-bootUSB» directory, so by default the entire path is «c:\kon-boot\kon-bootUSB»)
3. Follow the displayed instructions. USB Tutorial video is available here

Secure Boot Bypass

Starting from 3.5 version (commercial licenses) Kon-Boot is able to bypass Secure Boot protection on PCs (excluding Apple computers). Following tutorial explains how to boot Kon-Boot while the Secure Boot option is enabled in BIOS:

1. Prepare your Kon-Boot USB pendrive with Secure Boot Bypass option enabled
2. Boot your target computer with Kon-Boot pendrive
3. Enroll selected key as presented on the image below:
4. Reboot, Kon-Boot should be loaded automatically

UEFI and Secure Boot feature

Starting from 3.5 version (commercial licenses) Kon-Boot is able to bypass Secure Boot protection on PCs (excluding Apple computers). See Secure Boot Bypass for details.

In order to use Kon-Boot in UEFI mode you need to make sure that the UEFI BIOS is not configured to use Secure Boot feature. Secure Boot feature is typically disabled however in case of any problems please enter the BIOS setup and disable the Secure Boot option manually (see examples below).

Above: UEFI Secure Boot option on ASRock motherboard

Above: UEFI Secure Boot option on Samsung motherboard

Disabling Secure Boot feature on Lenovo:

1. Set Secure Boot option to disabled
2. In the «Restart» tab, select «Disabled» for «OS Optimized Defaults» option and accept potential warnings
3. In the «Restart» tab select «Load Setup Defaults» option and accept the displayed warnings
4. Exit and save changes

1. Set Secure Boot option to disabled
2. Set the «OS Optimized Defaults» to «Other OS»
3. Use the «Reset to setup mode» option in one of the BIOS tabs
4. Exit and save changes

If you still have problems check out other youtube videos tutorials on this topic.

Disable virtualization support in BIOS

Newer Windows version use Virtualization-based Security (VBS) and/or hypervisor security. This can cause BSODs (Blue Screen Of Death) during loading Windows with Kon-Boot (Kon-Boot does not support virtualization). In order to prevent this from happening go to your BIOS setup and temporarily disable virtualization support (VT/VT-x) as presented on screenshots below.

This step is optional, try it if you experience Blue Screen of Death during booting your target Windows machine with Kon-Boot.

Following screenshots present how to disable virtualization support on various BIOSES (don’t forget to SAVE the changed settings).

Automatic Powershell Script Execution Feature

Starting from version 2.7 (commercial edition only) kon-boot allows user to run automatic powershell script just after the boot of target operating system. Powershell script of user choice is being run with full system rights. This gives excellent and very powerful opportunity for the forensics team to gather all the necessary data from the target system. Right now the feature works only in UEFI mode and on Windows 8 / Windows 10 systems (x64).

Following video presents this feature at work:

In order to use this feature just edit the «auto.ps1» file on your kon-boot USB media.

Will this feature be added to normal (legacy) BIOS mode?

It seems rather unlikely. Legacy BIOS Kon-Boot loader is very hard to maintain, additional unscheduled constant Windows 8 / Windows 10 security updates do not make things easier. Finally UEFI is now recognized as the BIOS replacement. Check our faq for more detailed answer on this topic.

Sticky Keys Feature

What’s Sticky Keys Feature? Sticky keys is a new Kon-Boot escalation feature which allows user to spawn a console window with system admin rights before the user is logged in. Kon-Boot allows you to get console window while the Windows login screen is still active.

• Windows operating system booted with kon-boot
• Sticky keys must be enabled in your target Windows system (they are by default)
• Kon-bootV2.1 and higher

• In order to activate sticky keys feature please tap SHIFT 5 times (FAST). (it should work with default Windows configurations)

Video tutorial available below:

Following commands should be typed manually in the console:

How to change profile password?

Please note: this is only for local accounts:

To change your password you can try the following way (after booting with kon-boot):

1. Navigate the Start Menu to Control Panel
2. Select «User Accounts and Family Safety»
3. If the User Account Control window appears click «Yes» and leave the password field empty
4. Select «Create a new account»
5. Create the account (pick a name) and set the permissions (administrator).
6. Disconnect Kon Boot and restart the computer to restore original Windows authentication functionality.

1. Select your new User Account (the account you have created)
2. Navigate the Start Menu to Control Panel
3. Select «User Accounts and Family Safety»
4. Select the target User Account (the one you want to change)
5. Select «Change the password»
6. Input the new information for the account and click «Change password»
7. You are done

How to change profile password using console?

You can change your local account password by using the Sticky Keys Feature and using following commands:

net user username newpassword

where the username is the name of the local account and newpassword is the new password for this local account. Please note this is only for local accounts.

Password expired

If you experience «password has expired and needs to be changed» error during your login attempt it simply means that your password has expired. This is caused by custom Windows password policy not a problem of Kon-Boot itself.

To fix this issue (after booting the target Windows OS with Kon-Boot):

1. Use the Sticky Keys Feature to activate the administrator console
2. Type: net user username /expires:never (where username is the target user name)
3. If previous step was not enough, try typing: net user username newpassword (where username is the target user name)
4. Reboot for changes to take effect

Locked account (account unlock)

It should be possible to unlock a locked Windows account by using the Sticky Keys Feature:

1. Use the Sticky Keys Feature to activate the administrator console
2. Type: net user username /active=yes (where username is the target user name)
3. Reboot for changes to take effect

If this is a domain account please try:

1. Use the Sticky Keys Feature to activate the administrator console
2. Type: net user username /DOMAIN /active:YES (where username is the target user name)
3. Reboot for changes to take effect

Please note Kon-Boot is a tool for bypassing passwords not really designed for unlocking so this information is just «extra».

Windows 10 Online Authorization Support

UPDATE 05.2018: Windows 10 online account authorization bypass was added to the 2.8 Kon-Boot Release (commercial licenses only, UEFI systems only).

Following video completely illustrates this entire process:

As for personal licenses:

Personal licenses does not offer online authorization bypass on Windows 10 systems. However user can still access the system as local administrator. In fact in the kon-boot v2.5 administrator account can be added automatically, as presented in the following scenario:

1. Boot your machine with kon-boot on USB (usb version is required)
2. Wait until your Windows 10 machine boots up
3. You should see following message displayed on the screen
4. If you want to get your new administrator account added click YES and follow the rest of instructions displayed on the screen

In case of problems (i.e. when message box was not displayed) you can add the administrator account manually using the sticky keys feature. Please see the Sticky Keys Feature for further details.

Windows HELLO login

If you account is an online (live) Windows 10 account and you have a commercial Kon-Boot license (commercial kon-boot licenses allow to bypass Windows 10 online/live passwords (UEFI)) you can bypass the Windows HELLO authorization as well.

Please notice: for online/live password bypass option to work it is necessary to wait approximetely

5minutes after Windows login screen appears (Kon-Boot message box should be displayed on the screen when things are ready).

1. After selecting your target account, please pick Sign-in options
2. Pick Microsoft account password option (or PIN alternatively)
3. Put any password / pin (not blank) and press enter

Support

Please visit the Contact us / Support page for details.

Вам также может понравиться

Windows или Linux: Что лучше выбрать?

Есть много причин выбирать между Windows и Linux, но

Файл владелец изменить linux

Команда Chown в Linux Chown Command in Linux (File

Установка шлюза по умолчанию linux

Настройка сети вручную Содержание Краткое описание

Чем разбить диск для linux

ИТ База знаний Курс по Asterisk Полезно — Узнать IP —