Linux для acer aspire one d270

Acer Aspire One D270-26Ckk и Убунта?

Хочу приобрести нетбук Acer Aspire One D270-26Ckk. Он оснащет такой интегрированной видеокартой как Intel GMA 3600. Я хочу использовать на этом нетбуке привычную мне Ксубунту. Но знаю что хорошее качество картинки возможно получить только на нВидиа видеокартах в связке с проприетарным драйвером.

Кто что может сказать про качество картинки?

Судя по постановке вопроса, о нетбуках на Atom Cedarview даже не думай. Интел всех кинули, драйверов нет.
Лучше тут почитай посоветуйте недобук

Может быть когда-нибудь и появятся полноценные драйвера (может быть они даже уже появились, я не в курсе), но я бы рекомендовал НИКОГДА не покупать убогие железки с атомом. Intel Atom N2100 (1.6) с Intel GMA X3150 лучше работает с линуксом, но там тоже всё несколько убого.

Тот же асер с более-менее нормальным процессором стоит всего на 5 000 дороже. уж лучше занять под это дело, нервы дороже.

Кстати, xubuntu придётся ставить 13.04, там хотя бы 2d терпимо работает на этом вашем gma 3600.

Нужно всего-то ядро поновее, с включённой опцией CONFIG_DRM_GMA3600 и поддержкой framebuffer`а. В xorg-server в качестве используемого драйвера выставляете fbdev. Всё работает. Конечно, за исключением 3d ускорения, но на нетбуке оно и не нужно.

может быть они даже уже появились, я не в курсе

Источник

ACER Aspire One D270 + Ubuntu 12.04 LTS 32-bit

Установка и настройка Ubuntu 12.04 LTS на нетбук ACER Aspire One D270 (блог еще одного товарища по несчастью)

  • 10.1″ display
  • Dual 1,6 GHz Intel Atom N2600 processor
  • GMA 3600 graphics chip integrated on processor
  • 320 GB hard drive
  • 1 GB RAM, extendable to 2 GB

1. Подготовка к установке.

Установить можно записав скачанный образ на диск или флешку при помощи этого.

В данном случае необходим внешний DVD-RW или флешка, т.к. нетбук не имеет привода.

Процесс установки описывать не буду, кому надо, сходят в гугл, я же описываю послеустановочную настройку.

UPD.

Видя большое количество запросов типа «Как поставить линукс на ACER D270» я решил поделиться страшной тайной.

Некоторые владельцы данного нетбука вероятно заметили отсутствие DVD-привода, по этой причине установка возможна с USB-флешки или USB-DVD привода.

2. Собственно установка.

Вот ссылка на статью, в которой описана установка с флеш-накопителя, его подготовка с помощью программы Universal USB Installer.

Установка с флешки ничем не отличается от установки с диска, кстати у меня установка прошла в штатном режиме, проблем не возникало.

3. Настройка графической оболочки.

Проблемы: нет видеодрайвера на стандартном ядре , на ядре 3.5 отваливается wi-fi.

Драйвер видео ставится через менеджер установки проприетарных драйверов.

Для меня важнее работающий wi-fi, т.к. играть на нетбуке я не собираюсь, но проблему с драйвером не буду откладывать, приятнее работать с плавным интерфейсом.

При установке экран потух, но бук не завис. После перезагрузки все поднялось нормально, появилась регулировка яркости и заработал VGA разъем (HDMI проверить не на чем).

В менеджере драйверов появился еще один драйвер, может в следующий раз его попробую.

Unity мне не слишком нравится, лучше использовать классический Gnome.

Тут есть два варианта: форк Gnome 2 под названием MATE или классический Gnome из стандартных репозиториев. Я пробовал оба, MATE больше всего схож с Gnome 2, но какой-то он глючный и «неживой», Гном из репозиториев немного отличается, но имеет более адекватное поведение, поэтому остановлюсь на нем.

Откройте терминал (Ctrl+Alt+T), скопируйте и выполните следующие команды:

Во время установки откроются три окна, где вам будут заданы вопросы сохранения или изменения параметров, ответьте утвердительно (да) и нажмите Enter.

По окончании загрузки и установки пакетов, нужно завершить сеанс и перед входом в систему в окне LigtDM выбрать MATE.

Теперь на экране входа в систему можно выбрать рабочий стол Gnome Classic.

Еще есть один проект под названием Cinnamon.

Краткий ФАК по установке.

Удаляем и отключаем лишнее из Ubuntu 10.04 — 10.10

Compiz — композитный менеджер окон для X Window System, использующий для ускорения 3D графики OpenGL. Он предоставляет множество новых графических эффектов, доступных в любых графических средах X Window, в том числе GNOME и KDE. Представляет собой комплекс плагинов, декораторов, инструментов настройки интерфейса и эффектов.

Удаляем командой в теринале:

Отключаем запрос пароля после ждущего режима

набираем в консоль:

после этого идем во вкладку

и снимаем нужные галочки с suspend и hibernate

Удаляем клиент мгновенных сообщений:

Удаляем Клиент микроблогов:

Удаляем и таким образом сокращаем меню Приложение на 1 строчку:

Удаляем если не надо приложение для сканирования:

Удаляем приложение для работы с фотографиями, кстати Shotwell весьма хорош:

удаляю если также не предполагаю использовать этот сервис:

довольно громоздкий почтальон, если он вам не нужен, то все его пакеты можно удалить введя в терминале вот эту команду:

Если в терминале будет написано, что какого-то пакета нет исключите его из списка и повторите действия.

А если вдруг неудача и после перезагрузки Gnome откажется загружатся то переходим в консольный режим Ctrl+Alt+F6 и вводим команду:

Так мы вернем все на место и востановим Gnome

Менеджер обновлений Ubuntu

Удаляем через терминал:

а все последние обновления в дальнейшем получаем так:

Удалить значок письма из апплета

Удаляем пакет через синаптик или терминал:

Удаляю если не планирую открывать кому-либо свой рабочий стол, поэтому нет необходимости в приложении по настройке доступа к рабочему столу:

Vinagre tsclient rdesktop

удалить если нет необходимости просматривать другие рабочие столы и использовать клиент терминального сервера:

удаляю очистку системы:

удаляю если нет необходимости в его создании и также убираю индикатор сеанса (апплет удалить надо будет вручную, выключение компьютера и смена сеанса будет доступно затем через меню Система, эти пункты появятся в меню после удаления апплета):

Читайте также:  Windows использует не все ядра

удаляю всё (типа экранной лупы, тем и так далее):

Если в терминале будет написано, что какого-то пакета нет исключите его из списка и повторите действия.

Центр приложений Ubuntu

визуально очень удобен, но весь софт можно ставить через Synaptic или терминал, поэтому центр приложений по большому счёту не нужен и если хотите можно удалить:

удаляю приложение проверка системы:

удалить если нет потребности:

удаляю громоздкий дефолтный музыкальный проигрыватель:

Удаление ненужных пакетов после установки, очистка кэша

Переходим: Synaptic → Настройки → Параметры → вкладка Файлы

И видим, что можно сделать: Удалять загруженные файлы после установки, Удалять файлы истории.

5. Установка программ.

Нет смысла описывать способы и процесс установки программ, т.к. это тоже можно найти в великом и всемогущем. Список полезного софта есть тут.

В-целом все вышло очень даже культурно и аккуратно.

Источник

Как мне заставить работать Acer Aspire One D270?

Я планировал купить Acer Aspire One D270 в течение нескольких дней и когда все установят linux на свой нетбук, я тоже планировал это сделать.

Теперь мой вопрос заключается в том, как аппаратная совместимость Acer с Linux и, в частности, в отношении нового Acer Aspire One D270.

Кто-нибудь пробовал установить linux на эти новые нетбуки. Будет очень полезно, если пользователь D270 сможет поделиться своим опытом использования Linux.

Я читал на некоторых форумах, что есть некоторые проблемы с драйверами Linux Intel GMA 3600 и что люди не могут регулировать свою яркость. Так что, поскольку я — нуб Linux, это серьезная проблема или нет.

Оперативная память: 2 Гб DDR3 Процессор: Intel N2600(Cedar Trail) Графика: Intel GMA 3600 Жесткий диск: 320 Гб 5400 об / мин

11 ответов

Как ни странно, Ubuntu 12.04 отлично установлен на моем Acer Aspire One D270 и работает с разрешением 1024*600, хотя и сообщает о «неизвестном» мониторе. Я установил Google Chrome, и он запускает трейлеры Apple iTunes, работающие в окне, с разрешением 480p, очень четкое, без заиканий и других проблем.

Я говорю «как ни странно», потому что, когда я пытался сделать аналогичную установку на Asus x101ch, который также имеет чипсет Atom N2600, он будет работать ТОЛЬКО на 800*600 независимо от того, что я делаю. Я попробовал установить только что выпущенную Fedora 17, которая ПОДДЕРЖИВАЕТСЯ для поддержки N2600/GMA3600, но хотя она установлена ​​(на Asus) на 1024*600, я вообще не мог установить Google Chrome — продолжал призывать к программному обеспечению это не было установлено, но поиск через программу добавления программного обеспечения не мог найти это. (Я обнаружил, что Fedora 17 гораздо менее удобна для пользователей, чем настольный компьютер, чем Ubuntu, и, верьте или нет, на самом деле мне нравится Unity в Ubuntu лучше, чем другие настольные компьютеры, которые я пробовал (Linux Mint, LXDE, XFCE).)

Хотелось бы мне узнать, что Voodo позволило установить Ubuntu 12.04 в 1024*600 на D270, поскольку я могу взять Lenovo S110 N2800, пока я за границей, и хотел бы запустить на нем Ubuntu, но нет, если я застрял на 800*600 вроде на асусе.

Кстати, я не думаю, что есть программная поддержка для каких-либо расширенных функций GMA 3600, кажется, что он работает на простом универсальном уровне VESA без какого-либо аппаратного ускорения, но с двумя ядрами N2600 это нормально для простого видео в браузере, по крайней мере. Если кто-нибудь захочет, чтобы я подключил внешний DVD-плеер, чтобы посмотреть, может ли он воспроизводить DVD, или посмотреть, сможет ли он воспроизводить DVD-диски h.264 с помощью Handbrake, дайте мне знать.

Установите бинарный драйвер Intel Xorg для графических процессоров GMA3600 (Cedarview)!

а). все еще не полная производительность, но работает с 2-мерным ускорением, и я мог воспроизводить видео 720p без проблем.

б). Отрегулируйте яркость с помощью Fn Keys Work!

Сначала установите универсальное ядро, перезагрузитесь и убедитесь, что вы используете это ядро:

Удалите ядро ​​pae с соответствующими заголовками и перезагрузитесь в конце этого:

  • sudo dpkg -l | grep linux-image (Это покажет ядра в вашей системе)
  • Удалите все пакеты, связанные с ядром Pae: sudo apt-get —remove purge «name of package»
  • sudo dpkg -l | grep linux-headers (Это покажет заголовки в вашей системе)
  • Удалить все пакеты, связанные с заголовками pae: sudo apt-get —remove purge «name of package»

Установите драйверы cedarview:

Обновление загрузчика Grub

Перезагрузите систему и радуйтесь!

ПРИМЕЧАНИЕ: может активировать тест 3D ускорения, чтобы увидеть, работает ли он. Для этого измените Option «AIGLX» на «On» (настройка по умолчанию):

Источник

Aspire One netbook and Linux

I got an Aspire One netbook for Christmas and after browsing around about Windows 7, I found that many people prefer Linux over Windows and this has tempted me to try Linux instead. I’ve always been a Windows user so I would like to try something new for a change.

What I would like to know is is Linux compatible with my netbook? The model I have is the D270-1466. Does anyone have this specific netbook who has installed Linux onto it? My netbook will mainly be used for the internet, music and as a word processor.

In case this info is needed, my netbook has the Atom N2600(1.6 GHz, 1 MB L2 cache) with 1 GB DDR3 Memory and a 320 HDD.

Best Answer

you can install linux on that system, but be forewarned, linux is more complicated to use than windows. if you would still like to try it, the version i recommend is linux mint 14. that is the newest version of linux mint, it is ubuntu based, and the most user friendly. i use it on my acer, i have it set up to dual boot that and windows 7. i dont recommend you dual boot as your computer is a little small for that. any other questions feel free to pm me.

Читайте также:  Управление сеансами удаленных рабочих столов windows

FAQ & Answers

you can install linux on that system, but be forewarned, linux is more complicated to use than windows. if you would still like to try it, the version i recommend is linux mint 14. that is the newest version of linux mint, it is ubuntu based, and the most user friendly. i use it on my acer, i have it set up to dual boot that and windows 7. i dont recommend you dual boot as your computer is a little small for that. any other questions feel free to pm me.

Thank you so much! I’ll look into it a little more before going through with it but it’s good to know which version to use instead of just trying anything. When I first looked into Linux, some people said that Linux wasn’t very compatible with the processor in this netbook which is why I wanted to ask about it first before going through with anything.

So changing the OS won’t affect anything like the screen resolution or anything along those lines?

When I go through with this, I might be sending you a PM or two for help. I hope that won’t be a problem.

your system exceeds the minimum system requirements, and the screen resolution should be perfectly fine

I’m eagerly awaiting the Aspire One I just ordered (not the same model as yours), and I’m going to wipe Windows and install Linux immediately upon receipt. (In fact, I’m going to try to boot to a Linux USB drive and make a backup of the hard disk in an unbooted state.)

I’ve never used Linux Mint, but right now it’s the most popular distro, so it probably is indeed a good choice. My favorite distro is Fedora, though I’m thinking of installing something else. Maybe Mint because it’s popular. Maybe Debian because it’s very stable. Maybe Vector Linux because I’ve wanted to try it. Maybe PCLinuxOS because I used to use it and ran it continuously for something like 9 months without ever rebooting it. (Try that with Windows!)

I think it’s wrong to say Linux is more complicated to use than Windows. It’s definitely harder to get started, because Windows is already installed and Linux isn’t. But once you get it up and running, it’s at least as easy to use. I suffer through Windows all day at work (though at least I have Cygwin to keep me sane) and several distros of Linux at home. Linux is superior.

BTW, Arch Linux has a page devoted to tips for running Linux on the Aspire One.

We use linux on a regular basis. if you have any problems or questions get ahold of us at

[edited for privacy]

. My husband is one of the programmers for Ubuntu, Kubuntu, PuppyLinux, etc. The nice thing about Linux/Unix is that there are no Viruses to have to deal with.

Holy Cow! You’re very brave to post your phone number on a public forum.

You’re right about the no-virus advantage of Linux. When people refer to «computer viruses«, they really mean and should say «Windows viruses«.

Sorry for taking so long to get back to this thread. I didn’t expect any new posts!

I still haven’t installed it yet. I’m still reading up on it but it is tempting me more and more because from what I’ve read, it’s more suited for customizing it to how you want it unlike Windows where you get things you really don’t need or want. The one that appeals to me is the XCFE version.

One thing I did find is that while it wasn’t on the Linuxmint forums, I did come across some people who said that Linux doesn’t work on the Acer model that I have. Well, they only mentioned the D270 so whether it is the exact model I have or a different one, I can’t say. They mentioned something about and xserver.

I might go onto the forums to ask some questions about it. Two of them being about changing the desktop wallpaper and changing the mouse pointers. I like being able to customize those two things and I don’t know if it’s possible to do that in Linux Mint.

Ken, did you install Linux yet? How did it turn out for you? Thanks for the link to. I’ll check it out.

Thank you for the offer, Tracey. I won’t call but I just may drop you a PM when the time comes that I finally go through with this.

Ken, did you install Linux yet? How did it turn out for you? Thanks for the link to. I’ll check it out.

Yes, I installed Debian Linux because they aim for stability over rapid development. Their installation procedure is very smooth.

I had intended to simply wipe Windows7 off the disk, but I decided to shrink its partition and install Linux in a smaller partition, since I’ve never used 100GB on any machine, and this hard disk is 250GB. I booted SystemRescueCd from a thumb drive and used ntfsresize to do the resizing. SRC is a tiny version of Linux which specializes in tools to fix hard disk problems. But the resizing procedure was different than I expected, so I let it set for a while before I got back to it.

Читайте также:  Windows forms button background image

Now it’s nice to have a tiny Linux PC to take with me. I rarely take my Dell laptop anywhere because it’s so big. (It’s rather ordinary, but that’s big).

The Aspire ONE D270 is a beautiful netbook. Unfortunately, most Linux distributions can not currently — as of September 2013— run it, as they do not have drivers to work with its Cderview graphics. Before trying to install any of the many distributions of Linux, make sure that it’s kernel [kind of like the powertrain in a vehicle] was built handle the Cedarview chip, also know as PowerVR, gma500_gfx, and Intel GMA-3650. Shortly after the D270 reached the market Ubuntu —one of the most popular Linux Distributions— developed a driver which could be installed in it under Ubuntu’s «Precise Pangolin» model. Offshoots of Ubuntu such as Lubuntu, Xubuntu, and derivatives such Mint, and Pinguy and Zorin could also be take advantage of that driver. [Zorin and Pinguy frequently build-in capabilities that Ubuntu leaves up to action by the user]. Unfortunately, as far as I know, although the kernel used by Ubuntu in creating Raring Ringtail, its current model, can support the chip, Ubuntu did not develop the driver. So I’m uncertain whether any Ubuntu offshoot or derivative can properly handle graphics on the D270. If you want a «standard» Linux distribution, I would try Zorin installed to a USB-Key —the D270 can be booted that way— using LinuxLiveUSB Creator, a program which runs under Windows. I know from experience that at least three versions of Puppy Linux function very well. They are Upup 3.8.3 built by «pemasu», precise 5.7.1 built by Barry Kauler —both of these were created using precise pangolin binaries— and raring-3.9.9.2, also built by pemasu but using ubuntu’s raring binaries, albeit in such a way as to handle the Cedarview graphics chip. Running under Puppy Linux, the D270 is not only beautiful, but fast.

Just wanted to clear up some errata and add some additional information. The Cedarview graphics chip used by the D270 is actually the Cedarview gma600_gfx, also known as the Intel GMA-3600, licensed by Intel from PowerVR. Since my last post I’ve had the opportunity to explore running other variants of Puppy Linux, and have discovered at least two more which handle the D270’s capabilities very well. If you’re interested in how to get any of those Pups up and running on your computer, see my posts @ Puppy Precise & Raring and Slacko Pups on the D270.

Someone commented above about not having to worry about viruses on Linux. Well you don’t, but not because viruses can’t be written to invect Linux systems. It’s just that they’re not. A virus is a program. Programs can only run on the operating system they’re written for. Linux is open source, which means anyone can use it and modify it. So there are now hundreds of different Linux distributions which may, or may not, be able to run applications written for a different Linux Operating system. Additionally, a couple times a year Linux Devs build new kernels in order to take advantage of hardware advances. Once a year, sometimes more often, each of the creators of a Linux Distribution may rebuild a new version of their distribution using the new kernel. Applications which ran under the old kernel may not run under the new kernel. The result is that there are thousands of Linux Operating systems, which may, may not, or somewhere in between, be able to run programs from some other Linux Operating system. If you were a malcontent and were going to spend hours of your time trying to screw up other peoples computers, would you direct your energies to at most the couple hundred thousand computers running the most popular Linux Distriubution, or the couple hundred million users of Windows 7-8, or XP?

Part of the reason Puppy Linux runs as fast as it does is that it does not have to run anti-virus applications in the background. [It does, however, run a firewall providing a additional line of defense against intrusion to that provided by your router’s firewall]. The other reason is that most Puppys require only 256 Mbs of RAM. Programs are usually smaller than their Windows equivalents and Puppy, when there’s sufficient RAM, will load an entire program into RAM. The largest programs seldom exceed 100 Mbs. The D270’s stock 1 Gb of RAM provides more than enough memory to multi-task three or four programs without any noticeable delay.

If you hear «Linux» and think «arcane» and «absence of Graphical User Interface» you’re about 20 years behind. Google «Puppy Linux» and select «Images.» Most of those images look like Windows XP, which is what most Puppy’s look like the first time you boot into them. But you’ll see some which look like Apple. Some Puppys come that way. In others, there are applications which can easily be installed to create that effect. And there are other applications, also easily installed, which will make Puppys look and behave nothing like Windows or Apple.

By the way, just so that this post doesn’t read soley as a plug for Puppy Linux, when I asked on the Puppy Linux Discussion Forum what computers long-time users recommended, the Acer Laptops and Netbooks were among the first to be mentioned. And I purchased one only after considering its competitors.

Источник

Оцените статью