Linux home bin directory

The /bin Directory

/bin is a standard subdirectory of the root directory in Unix-like operating systems that contains the executable (i.e., ready to run) programs that must be available in order to attain minimal functionality for the purposes of booting (i.e., starting) and repairing a system.

The root directory, which is designated by a forward slash ( / ), is the top-level directory in the hierarchy of directories (also referred to as the directory tree) on Unix-like operating systems. That is, it is the directory that contains all other directories and their subdirectories as well as all files on the system.

A directory in a Unix-like operating system is merely a special type of file that contains a list of the names of objects (i.e., files, links and directories) that appear to the user to be in it along with the corresponding inodes for each object. A file is a named collection of related information that appears to the user as a single, contiguous block of data and that is retained in storage (e.g., a hard disk drive or a floppy disk). An inode is a data structure on a filesystem that stores all the information about a filesystem object except its name and its actual data. A data structure is a way of storing data so that it can be used efficiently. A filesystem is the hierarchy of directories that is used to organize files on a computer system.

The full names (also referred to as the absolute pathnames) of all of the subdirectories in the root directory begin with a forward slash, which shows their position in the filesystem hierarchy. In addition to /bin, some of the other standard subdirectories in the root directory include /boot, /dev, /etc, /home, /mnt, /usr, /proc and /var.

Among the contents of /bin are the shells (e.g., bash and csh), ls, grep, tar, kill, echo, ps, cp, mv, rm, cat, gzip, ping, su and the vi text editor. These programs can be used by both the root user (i.e., the administrative user) and ordinary users.

A list of all the programs in /bin can be viewed by using the ls command, which is commonly used to view the contents of directories, i.e.,

/bin is by default in PATH, which is the list of directories that the system searches for the corresponding program when a command is issued. This means that any executable file (i.e., runnable program) in /bin can be run just by entering the file name at the command line and then pressing the ENTER key. The contents of PATH can be seen by using the echo command as follows:

There are several other directories on Unix-like systems that also contain the string (i.e., sequence of characters) bin in their names, including /sbin and /usr/bin. The former contains additional programs that are used to boot the system as well as administrative and system maintenance programs that are only available to the root user. The latter contains executable programs that are not required for booting or repairing the system.

Created June 5, 2005.
Copyright © 2005 The Linux Information Project. All Rights Reserved.

Источник

Linux Root Folders Explained

In this post, you will finally get the Linux root folders explained. You will learn how these folders are used by your Linux system and how you can use them.

When you open your file manager, you are usually located in your home directory. But if you go two levels up, you will see this set of directories:

This post exactly about all these directories. You can watch the video where these Linux root folders explained or continue reading below.

Linux Root folders

I won’t use the terminal here and I will show you some visual presentation. But you are of course are encouraged to open the terminal and explore all these directories. Let’s get started.

/ – The Root

Everything begins in your system from this directory. All your folders, hard drives, USB drivers, everything is located in this root folder. You cannot go above this directory.

Also, the root directory is designated by the slash sign.

The concept of the root directory may be difficult to understand for Windows users who are used to see something like disk C, disk D and disk E. In Linux, every disk is a represented as a folder that is mounted under this root directory.

This Linux Directory Structure may look like a mess, but believe me when you learn it, you will realize how much sense it makes.

/bin – Binaries

The /bin folder contains programs that are essential for the system to boot and run. So, if you destroy this folder, your system won’t boot and run.

These programs are stored in the binary format. In other words, they are not in text format. You cannot open and read the content of these programs. The advantage of such format is that a computer can read and execute these programs very fast.

/boot – Boot Files

It is easy to guess from the name. This folder is needed to boot your system. It contains the Linux kernel, initial RAM disk image for drives need at boot time, and the bootloader.

I also would like to point out that within this boot folder, you can find the grub folder that contains grub configuration files.

If you read my Arch Linux post, you should remember than I used this command to generate the GRUB configuration file.

The boot folder also contains the Linux kernel.

/dev – Device Nodes

Here, I need to introduce another important concept of Linux – everything is a file. The /dev folder contains files for all devices your Linux is able to recognize.

If you have some Linux experience, you may recall that when you mount a hard drive, you use a name such as /dev/sda1 . The sda is the name of a first hard drive recognized by your Linux kernel and it is located in the dev folder. When the disk is mounted, you see it as a folder in that mounting point.

You can also find here USB devices, CPU etc.

/etc – Configuration Files

The /etc folder comprises all system-wide configuration files and some shell scripts that are executed during the system boot. All files here are text files, so they are human readable.

If you ever did any system-wide configuration, you probably edited some files here.

For example, there is /etc/fstab file that contains a table of storage devices and their mounting points.

/home – Users’ Folder

The home directory contains a home folder for each regular user on your Linux system. For example, I have tow folders in my /home folder. ALU is my home folder. The second folder belongs to another user, whom I named User2. So, the home folder of every user is named by its username.

You have as many folders as many users you have on your system.

These users’ folders are where users store their private data such as documents, videos, picture, music etc. When you open your file manager or your terminal by default you are located in you user’s home folder. It is also often marked as

/lib – Libraries

You already know the /bin directory that contains programs, this /lin folder contains libraries required by those programs from the /bin folder.

A library is a set of functions that are shared between programs. Thus, this /lib folder is also essential for your system to work correctly.

/lost+found – Recovered Files

You will have this directory if you use the ext4 file system. Most of the modern Linux distros use ext4, so most likely you have this folder. This is a file system specific folder that is used for data recovery in case of file corruption. Unless something bad has happened, this folder should be empty on your system.

This /lost+found folder is produced on every separate partition. So, if your /home folder is on a separate partition, you should have this /lost+found folder in your home directory too.

/media – Automatic mount point

This folder is used for automatic mounting of removable media such as USB drives, CD-ROM etc. For example, if your system is configured for automatic mounting, when you insert a USB drive it will be mounted to this folder.

/mnt – Manual mount point

The /mnt folder is similar to the /media folder, it is also used to mount devices, but usually, it is used for manual mounting. You, of course, can manually mount your devices to /media , but to keep some order in your system it is better to separate these two mounting points.

/opt – Optional Software

This folder is not essential for your system to work. Usually, it is used to install commercial programs on your system. For example, my Dropbox installation is located in this folder.

/proc – Kernel Files

This is a virtual file-system maintained by the Linux kernel. Usually, you do not touch anything in this folder. It is needed only for the kernel to run different processes.

/root – Root Home

This is the home directory of your root user. Don’t mix it with the / root directory. The / directory is the parental directory for the whole system, whereas this /root directory is the same as your user home directory but it is for the root account.

If you log in as a root, you will be located in this directory by default. This is a folder for private data and account specific setting of your root account.

/run – Early temp

The /run is a recently introduced folder that is actually a temporary file-system. It is used to store temporary files very early in system boot before the other temporary folders become available.

/sbin – System Binaries

Similar to /bin this folder contains binaries for essential system tasks but they are meant to be run by the super user, in other words, the administrator of the system.

/srv – Service Data

This directory contains service files installed on your system. For example, if you installed a web-served on your Linux system, it will be located in this folder.

/tmp – Temporary Files

This is just a place where programs store temporary files on your system. This directory is usually cleaned on reboot.

/usr – User Binaries

This is probably the largest folder after your home folder. It contains all programs used by a regular user.

I would like to stop little more on sub-directories of this /usr folder.

/usr/bin contains the programs installed by your Linux distribution. There are usually thousands of programs here.

The libraries for this /usr/bin executables are located in the /usr/lib folder.

The /usr/local doesn’t have any programs by default, but if you compile and install a program system-wide it will be placed here.

The most useful folder is /usr/share . It contains all the shared data used by the programs from /usr/bin .

All default configuration files, themes, icons, wallpapers, sound files are stored here, one more folder I would like to mention here is the /usr/share/doc folder, where you can find the documentation files for programs installed on your system.

/var – Variable Files

The /var contains files that are of variable content, so their content is not static and it constantly changes. For example, this is where the log files are stored. If you don’t know, a log file is a file that records all events happening in your system while it is running. These log files often help to find out if something is not working correctly in your system.

Conclusion

Now you have some clue about all those folders in your Linux system.

Please, feel free to add anything in the comments bellow in case I missed something.

Источник

Linux Directory Structure Explained for Beginners

If you are even faintly acquainted with Linux, you might have heard the terms root, lib, bin etc. These are various directories that you’ll find in all Linux distributions.

In fact, the Linux Foundation maintains a Filesystem Hierarchy Standard (FHS). This FHS defines the directory structure and the content/purpose of the directories in Linux distributions. Thanks to this FHS, you’ll find the same directory structure in (almost) all the Linux distributions.

Let’s see the Linux directory structure in detail.

Linux directory structure

Linux is based on UNIX and hence it borrows its filesystem hierarchy from UNIX. You’ll fine a similar directory structure in UNIX-like operating systems such as BSD and macOS. I’ll be using the term Linux hereafter instead of UNIX though.

/ – The root directory

Everything, all the files and directories, in Linux are located under ‘root’ represented by ‘/’. If you look at the directory structure, you’ll realize that it is similar to a plant’s root.

Linux Directory Structure

Since all other directories or files are descended from root, the absolute path of any file is traversed through root. For example, if you have a file in /home/user/documents, you can guess that the directory structure goes from root->home->user->documents.

The cruel rm -rf / joke

You may have come across some jokes on internet that mentions “rm -rf /” . rm command is used for removing files and directories in Linux.

With rm -rf /, you ask your system to forcefully and recursively delete the contents of the root directory. Since root directory has everything underneath, you end up deleting everything and your Linux system just vanishes (theoretically).

Most Linux distribution won’t run this command unless you provide –no-preserve-root. In any case, don’t be curious to run this command. Curiosity killed the cat, after all.

/bin – Binaries

The ‘/bin’ directly contains the executable files of many basic shell commands like ls, cp, cd etc. Mostly the programs are in binary format here and accessible by all the users in the Linux system.

/dev – Device files

This directory only contains special files, including those relating to the devices. These are virtual files, not physically on the disk.

Some interesting examples of these files are:

• /dev/null: can be sent to destroy any file or string
• /dev/zero: contains an infinite sequence of 0
• /dev/random: contains an infinite sequence of random values

/etc – Configuration files

The /etc directory contains the core configuration files of the system, use primarily by the administrator and services, such as the password file and networking files.

If you need to make changes in system configuration (for example changing the hostname), this is where you’ll find the respective files.

/usr – User binaries and program data

in ‘/usr’ go all the executable files, libraries, source of most of the system programs. For this reason, most of the files contained therein is read­only (for the normal user)

• ‘/usr/bin’ contains basic user commands
• ‘/usr/sbin’ contains additional commands for the administrator
• ‘/usr/lib’ contains the system libraries
• ‘/usr/share’ contains documentation or common to all libraries, for example ‘/usr/share/man’ contains the text of the manpage

/home – User personal data

Home directory contains personal directories for the users. The home directory contains the user data and user-specific configuration files. As a user, you’ll put your personal files, notes, programs etc in your home directory.

When you create a user on your Linux system, it’s a general practice to create a home directory for the user. Suppose your Linux system has two users, Alice and Bob. They’ll have a home directory of their own at locations /home/alice and /home/bob.

Do note that Bob won’t have access to /home/alice and vice versa. That makes sense because only the user should have access to his/her home. You may read about file permissions in Linux to know more on this topic.

/lib – Shared libraries

Libraries are basically codes that can be used by the executable binaries. The /lib directory holds the libraries needed by the binaries in /bin and /sbin directories.

Libraries needed by the binaries in the /usr/bin and /usr/sbin are located in the directory /usr/lib.

/sbin – System binaries

This is similar to the /bin directory. The only difference is that is contains the binaries that can only be run by root or a sudo user. You can think of the ‘s’ in ‘sbin’ as super or sudo.

/tmp – Temporary files

As the name suggests, this directory holds temporary files. Many applications use this directory to store temporary files. Even you can use directory to store temporary files.

But do note that the contains of the /tmp directories are deleted when your system restarts. Some Linux system also delete files old files automatically so don’ store anything important here.

/var – Variable data files

Var, short for variable, is where programs store runtime information like system logging, user tracking, caches, and other files that system programs create and manage.

The files stored here are NOT cleaned automatically and hence it provides a good place for system administrators to look for information about their system behavior. For example, if you want to check the login history in your Linux system, just check the content of the file in /var/log/wtmp.

/boot – Boot files

The ‘/boot’ directory contains the files of the kernel and boot image, in addition to LILO and Grub. It is often advisable that the directory resides in a partition at the beginning of the disc.

/proc – Process and kernel files

The ‘/proc’ directory contains the information about currently running processes and kernel parameters. The content of the proc directory is used by a number of tools to get runtime system information.

For example, if you want to check processor information in Linux, you can simply refer to the file /proc/cpuinfo. You want to check memory usage of your Linux system, just look at the content of /proc/meminfo file.

/opt – Optional software

Traditionally, the /opt directory is used for installing/storing the files of third-party applications that are not available from the distribution’s repository.

The normal practice is to keep the software code in opt and then link the binary file in the /bin directory so that all the users can run it.

/root – The home directory of the root

There is /root directory as well and it works as the home directory of the root user. So instead of /home/root, the home of root is located at /root. Do not confuse it with the root directory (/).

/media – Mount point for removable media

When you connect a removable media such as USB disk, SD card or DVD, a directory is automatically created under the /media directory for them. You can access the content of the removable media from this directory.

/mnt – Mount directory

This is similar to the /media directory but instead of automatically mounting the removable media, mnt is used by system administrators to manually mount a filesystem.

/srv – Service data

The /srv directory contains data for services provided by the system. For example, if you run a HTTP server, it’s a good practice to store the website data in the /srv directory.

I think this much information is enough for you to understand the Linux directory structure and its usage.

In the end, if you want, you can download and save this image for quick reference to the directory structure in Linux systems.

Linux System Directories

Источник