Linux how to create links

How to Create Hard and Symbolic Links in Linux

In Unix-like operating systems such as Linux, “everything is a file” and a file is fundamentally a link to an inode (a data structure that stores everything about a file apart from its name and actual content).

A hard link is a file that points to the same underlying inode, as another file. In case you delete one file, it removes one link to the underlying inode. Whereas a symbolic link (also known as soft link) is a link to another filename in the filesystem.

Another important difference between the two types of links is that hard links can only work within the same filesystem while symbolic links can go across different filesystems.

How to Create Hard Links in Linux

To create a hard links in Linux, we will use ln utility. For example, the following command creates a hard link named tp to the file topprocs.sh .

Create a Hard Link to File

Looking at the output above, using ls command, the new file is not indicated as a link, it is shown as a regular file. This implies that tp is just another regular executable file that points to the same underlying inode as topprocs.sh .

To make a hard link directly into a soft link, use the -P flag like this.

How to Create Symbolic Links in Linux

To create a symbolic links in Linux, we will use same ln utility with -s switch. For example, the following command creates a symbolic link named topps.sh to the file topprocs.sh .

Create a Symbolic Link to File

From the above output, you can see from the file permissions section that topps.sh is a link indicated by l: meaning it is a link to another filename.

If the symbolic link already exist, you may get an error, to force the operation (remove exiting symbolic link), use the -f option.

Forcefully Create Symbolic Link

To enable verbose mode, add the -v flag to prints the name of each linked file in the output.

Enable Verbose in Command Output

That’s It! Do check out these following related articles.

In this article, we’ve learned how to create hard and symbolic links in Linux. You can ask any question(s) or share your thoughts about this guide via the feedback form below.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник

How to: Linux / UNIX create soft link with ln command

Symbolic links can be made to directories as well as to files on different filesystems or different partitions.

Two types of links

• symbolic links (also known as “soft links” or “symlinks”): Refer to a symbolic path indicating the abstract location of another file.
• hard links : Refer to the specific location of physical data.

How do I create soft link / symbolic link under Unix and Linux?

Soft links are created with the ln command. For example, the following would create a soft link named link1 to a file named file1, both in the current directory
$ ln -s file1 link1
To verify new soft link run:
$ ls -l file1 link1
Sample outputs:

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

From the above outputs it is clear that a symbolic link named ‘link1’ contains the name of the file named ‘file1’ to which it is linked.

How to use the ln command

So the syntax is as follows to create a symbolic link in Unix or Linux, at the shell prompt:
$ ln -s < source-filename >< symbolic-filename >

For example create a softlink for /webroot/home/httpd/test.com/index.php as /home/vivek/index.php, enter the following command:
$ ln -s /webroot/home/httpd/test.com/index.php /home/vivek/index.php
$ ls -l
Sample outputs:

You can now edit the soft link named /home/vivek/index.php and /webroot/home/httpd/test.com/index.php will get updated:
$ vi /home/vivek/index.php
Your actual file /webroot/home/httpd/test.com/index.php remains on disk even if you deleted the soft link /home/vivek/index.php using the rm command:
$ rm /home/vivek/index.php ## ##
## But original/actual file remains as it is ##
$ ls -l /webroot/home/httpd/test.com/index.php

Creating Symlink to a directory

The syntax remains same:
$ ln -s
For example, create a symbolic link from the /home/lighttpd/http/users/vivek/php/app/ directory to the /app/ directory you would run:
$ ln -s /home/lighttpd/http/users/vivek/php/app/ /app/
Now I can edit files using /app/
$ cd /app/
$ ls -l
$ vi config.php

How to overwrite symlinks/Soft link

Pass the -f to the ln command to overwrite links:
ln -f -s /path/to/my-cool-file.txt link.txt

How to delete or remove symlinks/soft links

Use the rm command to delete a file including symlinks:
rm my-link-name
unlink /app/
rm /home/vivek/index.php

Getting help about the ln command

Type the following ln command:
$ man ln
$ ln —help

ln command option	Description
—backup	make a backup of each existing destination file
-b	like —backup but does not accept an argument
-d	allow the superuser to attempt to hard link directories (note: will probably fail due to system restrictions, even for the superuser)
-f	remove existing destination files
-i	prompt whether to remove destinations
-L	dereference TARGETs that are symbolic links
-n	treat LINK_NAME as a normal file if it is a symbolic link to a directory
-P	make hard links directly to symbolic links
-r	create symbolic links relative to link location
-s	make symbolic links instead of hard links
-S	override the usual backup suffix
-t	specify the DIRECTORY in which to create the links
-T	treat LINK_NAME as a normal file always
-v	print name of each linked file
—help	display this help and exit
—version	output version information and exit

Conclusion

You learned how to create a symbolic link in Linux using the ln command by passing the -s option. See ln command man page here for more information.

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

Symlink Tutorial in Linux – How to Create and Remove a Symbolic Link

A symlink (also called a symbolic link) is a type of file in Linux that points to another file or a folder on your computer. Symlinks are similar to shortcuts in Windows.

Some people call symlinks «soft links» – a type of link in Linux/UNIX systems – as opposed to «hard links.»

Difference Between a Soft Link and a Hard Link

Soft links are similar to shortcuts, and can point to another file or directory in any file system.

Hard links are also shortcuts for files and folders, but a hard link cannot be created for a folder or file in a different file system.

Let’s look at the steps involved in creating and removing a symlink. We’ll also see what broken links are, and how to delete them.

How to Create a Symlink

The syntax for creating a symlink is:

ln is the link command. The -s flag specifies that the link should be soft. -s can also be entered as -symbolic .

By default, ln command creates hard links. The next argument is path to the file (or folder) that you want to link. (That is, the file or folder you want to create a shortcut for.)

And the last argument is the path to link itself (the shortcut).

How to Create a Symlink for a File – Example Command

After running this command, you will be able to access the /home/james/transactions.txt with trans.txt . Any modification to trans.txt will also be reflected in the original file.

Note that this command above would create the link file trans.txt in your current directory. You can as well create a linked file in a folder link this:

There must be a directory already called «my-stuffs» in your current directory – if not the command will throw an error.

How to Create a Symlink for a Folder – Example Command

Similar to above, we’d use:

This would create a symlinked folder called ‘james’ which would contain the contents of /home/james . Any changes to this linked folder will also affect the original folder.

How to remove a symlink

Before you’d want to remove a symlink, you may want to confirm that a file or folder is a symlink, so that you do not tamper with your files.

One way to do this is:

Running this command on your terminal will display the properties of the file. In the result, if the first character is a small letter L (‘l’), it means the file/folder is a symlink.

You’d also see an arrow (->) at the end indicating the file/folder the simlink is pointing to.

There are two methods to remove a symlink:

How to Use Unlink to Remove a Symlink

This deletes the symlink if the process is successful.

Even if the symlink is in the form of a folder, do not append ‘/’, because Linux will assume it’s a directory and unlink can’t delete directories.

How to use rm to Remove a Symlink

As we’ve seen, a symlink is just another file or folder pointing to an original file or folder. To remove that relationship, you can remove the linked file.

Hence, the syntax is:

Note that trying to do rm james/ would result an error, because Linux will assume ‘james/’ is a directory, which would require other options like r and f . But that’s not what we want. A symlink may be a folder, but we are only concerned with the name.

The main benefit of rm over unlink is that you can remove multiple symlinks at once, like you can with files.

How to Find and Delete Broken Links

Broken links occur when the file or folder that a symlink points to changes path or is deleted.

For example, if ‘transactions.txt’ moves from /home/james to /home/james/personal , the ‘trans.txt’ link becomes broken. Every attempt to access to the file will result in a ‘No such file or directory’ error. This is because the link has no contents of its own.

When you discover broken links, you can easily delete the file. An easy way to find broken symlinks is:

This will list all broken symlinks in the james directory – from files to directories to sub-directories.

Passing the -delete option will delete them like so:

Wrapping up

Symbolic link are an interesting feature of Linux and UNIX systems.

You can create easily accessible symlinks to refer to a file or folder that would otherwise not be convenient to access. With some practice, you will understand how these work on an intuitive level, and they will make you much more efficient at managing file systems.

Frontend Web Engineer and Technical Writer. I love teaching what I know. Javascript / ReactJS / NodeJS

If you read this far, tweet to the author to show them you care. Tweet a thanks

Learn to code for free. freeCodeCamp’s open source curriculum has helped more than 40,000 people get jobs as developers. Get started

freeCodeCamp is a donor-supported tax-exempt 501(c)(3) nonprofit organization (United States Federal Tax Identification Number: 82-0779546)

Our mission: to help people learn to code for free. We accomplish this by creating thousands of videos, articles, and interactive coding lessons — all freely available to the public. We also have thousands of freeCodeCamp study groups around the world.

Donations to freeCodeCamp go toward our education initiatives and help pay for servers, services, and staff.

Источник

How to create a hard links in Linux or Unix

How to create a hard links in Linux or Unix

To create a hard links on a Linux or Unix-like system:

1. Create hard link between sfile1file and link1file, run: ln sfile1file link1file
2. To make symbolic links instead of hard links, use: ln -s source link
3. To verify soft or hard links on Linux, run: ls -l source link

Let us see examples to make a hard link on a Linux / Unix systems.

ln command example to make a hard link on a Linux

The ln command make links between files. By default, ln makes hard links.

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

ln Command Syntax T Create Hard Link in Linux

The syntax is as follows for Unix / Linux hard link command:

• source is an existing file.
• link is the file to create (a hard link).

To create hard link for foo file, enter:
echo ‘This is a test’ > foo
ln foo bar
ls -li bar foo
Sample outputs:

• 4063240 : Inode. From the above sample output we can see that inodes are identical. We passed the -i option to the ls command to display the index number of each file (inodes).
• 2 : The number of hard links to file is shown in the third column. So if you run, ln foo hlink2 , the counter will increase to three.

How do I delete a hard link on Linux or Unix?

The rm command deletes files on Linux or Unix including a hard link. However, data is still accessible as long as another hard link exists even if you delete source file. To get rid of data you must remove all hard links including source.

Use the rm command:
$ echo ‘I love Linux and Unix’ > file.txt
$ cat file.txt
## create hard links ##
$ ln -v file.txt hardlink1
$ ln -v file.txt hardlink2
## list all files with inodes ##
$ ls -li file.txt hardlink?
## remove 1st hardlink ##
$ rm hardlink1
$ ls -li file.txt hardlink?
## remove source file ##
$ rm file.txt
$ ls -li file.txt hardlink?
## but we can still access original file.txt data ##
$ cat hardlink2
## to get rid of file.txt data delete all hard links too ##
$ rm hardlink2
## error error all data gone ##
$ cat file.txt hardlink?
$ ls -li file.txt hardlink?

Hard Links Limitations on Linux and Unix

There are some issues with hard links that can sometimes make them unsuitable. First of all, because the link is identical to the thing it points to, it becomes difficult to give a command such as “list all the contents of this directory recursively but ignore any links”. Most modern operating systems don’t allow hard links on directories to prevent endless recursion. Another drawback of hard links is that they have to be located within the same file system, and most large systems today consist of multiple file systems.

Источник