Linux ping through interface

Ping using specific gateway interface or source IP address

I have multiple gateways configured on my Linux or Unix based router. How do I ping through a specific interface of the gateway? How can I ping using a particular source IP address?

Introduction: The ping command determines whether a network destination is reachable. ping is one of the useful command line tools to get info about computers including the LAN and Internet. One can use ping command to find whether a specific IP address is accessible from your host. Another usage of ping is to find out the distance (round trip) between any two network routers or other network devices such as switches, firewall, websites, hosts and other stuff. This page shows ping using specific gateway interface and ping using specific source IP address.

Tutorial details
Difficulty level	Easy
Root privileges	No
Requirements	Linux or Unix
Est. reading time	3 minutes

How to ping using specific gateway interface or source IP address

Initially, Unix-like systems had ping command. But, versions of ping are now available for all leading operating systems such as Microsoft Windows and others. The version discusses here only tested on a Linux, FreeBSD, and Unix-like system. The ping command works by sending ICMP packets to the target IP address and listening for returned packets. The syntax is:
ping ip-address
ping domain-name
ping www.cyberciti.biz
ping 192.168.2.254
ping [options] destination
ping [options] [IP|hostname]

Pass the -c option to the ping command to send out only the number of packets. For example, to send out only four packets to the IP address 8.8.8.8:
ping -c 4 8.8.8.8

Ping using specific gateway interface

To find out your interface names on a Unix-like or *BSD system run the ifconfig command:
ifconfig
ifconfig -a
Linux users use the ip command or ifconfig command:
ip a
You need to pass the -I option as follows:
ping -I interface destination
ping -I eth0 www.cyberciti.biz
ping -I tun0 1.1.1.1
ping -I br0 8.8.8.8
##################################################
### for bsd ping use interface IP address ########
### for e.g. vio0 interface has 192.168.122.124 ##
##################################################
ping -c4 -I 192.168.122.124 www.cyberciti.biz
ping -c4 -I tun0 www.cyberciti.biz

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

Ping using specific source IP address

One can set socket sndbuf. The syntax is:
ping -S ip dest
ping -S 192.168.2.24 www.cyberciti.biz
ping -c 4 -S 10.207.0.54 1.1.1.1

Putting it all tougher – Ping using specific source IP address

Here is a shell script that ping given domain/IP address using three wan interface configured on my FreeBSD based firewall/router. The script use for loop and ping command:

Источник

Linux ping command

On Unix-like operating systems, the ping command sends ICMP ECHO_REQUEST packets to network hosts.

This page covers the Linux version of ping.

Description

ping is a simple way to send network data to, and receive network data from, another computer on a network. It is frequently used to test, at the most basic level, whether another system is reachable over a network, and if so, how much time it takes for that data to be exchanged.

The ping utility uses the ICMP protocol’s mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST datagrams («pings») have an IP and ICMP header, followed by a struct timeval and then an arbitrary number of «pad» bytes used to fill out the packet.

Syntax

Options

-a	Audible ping.
-A	Adaptive ping. Interpacket interval adapts to round-trip time, so that effectively not more than one (or more, if preload is set) unanswered probes are present in the network. Minimal interval is 200msec for any user other than the super-user. On networks with low RTT (round trip time), this mode is essentially equivalent to flood mode (see -f, below).
-b	Allow pinging a broadcast address.
-B	Do not allow ping to change source address of probes. The address is bound to one selected when ping starts.
-m mark	Use mark to tag the packets going out. This is useful for variety of reasons in the kernel such as using policy routing to select specific outbound processing.
-c count	Stop after sending count ECHO_REQUEST packets. With the deadline option, ping waits for count ECHO_REPLY packets, until the timeout expires.
-d	Set the SO_DEBUG option on the socket being used. This socket option is not used by Linux kernel.
-f	Flood ping. For every ECHO_REQUEST sent, a period («.«) is printed, while for every ECHO_REPLY received, a backspace is printed. This provides a rapid display of how many packets are being dropped. If an interval is not given (see -i, below), it sets interval to zero and outputs packets as fast as they come back or one hundred times per second, whichever is more. Only the super-user may use this option with an interval of zero.
-i interval	Wait interval seconds between sending each packet. The default is to wait for one second between each packet normally, or not to wait at all in flood mode (see -f, above). Only super-user may set interval to values less 0.2 seconds.
-I interface-address	Set source address to specified interface address. Argument may be a numeric IP address or the name of the device. When pinging IPv6 link-local addresses, this option is required.
-l preload	If preload is specified, ping sends that many packets not waiting for reply. Only the super-user may select a preload of more than 3.
-L	Suppress loopback of multicast packets. This flag only applies if the ping destination is a multicast address.
-N nioption	Send ICMPv6 Node Information Queries (RFC 4620), instead of Echo Requests. nioption may be one of the following:

name	Queries for Node Names.
ipv6	Queries for IPv6 Addresses. There are several IPv6 specific flags: ipv6-global Request IPv6 global-scope addresses. ipv6-sitelocal Request IPv6 site-local addresses. ipv6-linklocal Request IPv6 link-local addresses. ipv6-all Request IPv6 addresses on other interfaces.
ipv4	Queries for IPv4 addresses. There is one IPv4 specific flag: ipv4-all Request IPv4 addresses on other interfaces.
subject-ipv6=ipv6addr	IPv6 subject address.
subject-ipv4=ipv4addr	IPv4 subject address.
subject-name=nodename	Subject name. If it contains more than one dot, fully-qualified domain name is assumed.
subject-fqdn=nodename	Subject name. Fully-qualified domain name is always assumed.

-n Numeric output only. No attempt will be made to look up symbolic names for host addresses. -p pattern You may specify up to 16 «pad» bytes to fill out the packet you send. This is useful for diagnosing data-dependent problems in a network. For example, -p ff causes the sent packet to be filled with all ones: ff is 255 in hexadecimal, or 11111111 in binary. -D Print timestamp (unix time + microseconds) before each line. -Q tos Set Quality of Service-related bits in ICMP datagrams. tos can be either decimal or hex number. Traditionally (RFC1349), these are interpreted as: 0 for reserved (currently being redefined as congestion control), 1—4 for TOS (type of service) and 5—7 for precedence. Possible settings for type of service are: minimal cost: 0x02, reliability: 0x04, throughput: 0x08, low delay: 0x10. Multiple TOS bits should not be set simultaneously. Possible settings for special precedence range from priority (0x20) to net control (0xe0). You must be root (CAP_NET_ADMIN capability) to use critical or higher precedence value. You cannot set bit 0x01 (reserved) unless ECN is enabled in the kernel. In RFC2474, these fields are redefined as 8-bit DS (Differentiated Services), consisting of: bits 0—1 of separate data (ECN will be used, here), and bits 2—7 of Differentiated Services Codepoint (DSCP). -q Quiet output. Nothing is displayed except the summary lines at startup time and when finished. -R Record route. Includes the RECORD_ROUTE option in the ECHO_REQUEST packet and displays the route buffer on returned packets. Note that the IP header is only large enough for nine such routes. Many hosts ignore or discard this option. -r Bypass the normal routing tables and send directly to a host on an attached interface. If the host is not on a directly-attached network, an error is returned. This option can ping a local host through an interface with no route through it, provided the option -I is also used (see above). -s packetsize Specifies the number of data bytes to be sent. The default is 56, which translates into 64 ICMP data bytes when combined with the 8 bytes of ICMP header data. -S sndbuf Set socket sndbuf. If not specified, it is selected to buffer not more than one packet. -t ttl Set the IP TTL (time-to-live). -T timestamp-option Set special IP timestamp options. timestamp-option may be either tsonly (only timestamps), tsandaddr (timestamps and addresses) or tsprespec host1 [host2 [host3 [host4]]] (timestamp prespecified hops). -M hint Select Path MTU discovery strategy. hint may be either do (prohibit fragmentation, even local one), want (do PMTU discovery, fragment locally when packet size is large), or dont (do not set DF flag). -U Print full user-to-user latency (legacy ping behavior). Normally ping prints network round trip time, which can be different f.e. due to DNS failures. -v Verbose output. -V Display version number, and exit. -w deadline Specify a timeout, in seconds, before ping exits regardless of how many packets are sent or received. In this case, ping does not stop after count packet are sent, it waits either for deadline to expire or until count probes are answered or for some error notification from network. -W timeout Time to wait for a response, in seconds. The option affects only timeout in absence of any responses, otherwise ping waits for two RTTs.

Notes

When using ping for fault isolation, it should first run on the localhost, to verify that the local network interface is up and running. Then, hosts and gateways further and further away should be «pinged». Round-trip times and packet loss statistics are computed. If duplicate packets are received, they are not included in the packet loss calculation, although the round trip time of these packets is used in calculating the minimum/average/maximum round-trip time numbers. When the specified number of packets are sent (and received) or if the program is terminated with a SIGINT signal, a summary is displayed. Shorter current statistics can be obtained without termination of process with signal SIGQUIT.

If ping does not receive any reply packets at all it will exit with code 1. If a packet count and deadline are both specified, and fewer than count packets are received by the time the deadline has arrived, it also exits with code 1. On other error it exits with code 2. Otherwise, it exits with code 0. This makes it possible to use the exit code to see if a host is alive or not.

ping is intended for use in network testing, measurement and management. Because of the load it can impose on the network, it is unwise to use ping during normal operations or from automated scripts.

ICMP packet details

An IP header without options is 20 bytes. An ICMP ECHO_REQUEST packet contains an additional 8 bytes worth of ICMP header followed by an arbitrary amount of data. When a packetsize is given, this indicated the size of this extra piece of data (the default is 56). Thus the amount of data received inside of an IP packet of type ICMP ECHO_REPLY is always 8 bytes more than the requested data space (the ICMP header).

If the data space is at least of size of struct timeval, ping uses the beginning bytes of this space to include a timestamp which it uses in the computation of round trip times. If the data space is shorter, no round trip times are given.

Duplicate and damaged packets

ping will report duplicate and damaged packets. Duplicate packets should never occur, and seem to be caused by inappropriate link-level retransmissions. Duplicates may occur in many situations and are rarely (if ever) a good sign, although the presence of low levels of duplicates may not always be cause for alarm.

Damaged packets are serious cause for alarm and often indicate broken hardware somewhere in the ping packet’s path (in the network or in the hosts).

Trying different data patterns

The (inter)network layer should never treat packets differently depending on the data contained in the data portion. Unfortunately, data-dependent problems were known to sneak into networks and remain undetected for long periods of time. In many cases, the particular pattern having problems is something that doesn’t have sufficient «transitions,» such as all ones or all zeros, or a pattern right at the edge, such as almost all zeros. It isn’t necessarily enough to specify a data pattern of all zeros (for example) on the command line because the pattern that is of interest is at the data link level, and the relationship between what you type and what the controllers transmit can be complicated.

This means that if you have a data-dependent problem you will probably have to do a lot of testing to find it. If you are lucky, you may manage to find a file that either can’t be sent across your network or that takes much longer to transfer than other similar length files. You can then examine this file for repeated patterns that you can test using the -p option.

TTL details

The TTL (time-to-live) value of an IP packet represents the maximum number of IP routers that the packet can go through before being thrown away. In practice, you can expect each router in the Internet to decrement the TTL field by exactly one.

The TCP/IP specification states that the TTL field for TCP packets should be set to 60, but many systems use smaller values (4.3 BSD uses 30, 4.2 used 15).

The maximum possible value of this field is 255, and most Unix systems set the TTL field of ICMP ECHO_REQUEST packets to 255. This is why you find you can ping some hosts, but not reach them with telnet or ftp.

In normal operation, ping prints the ttl value from the packet it receives. When a remote system receives a ping packet, it can do one of three things with the TTL field in its response:

• Not change it; this is what Berkeley Unix systems did before the 4.3 BSD Tahoe release. In this case, the TTL value in the received packet will be 255 minus the number of routers in the round-trip path.
• Set it to 255; this is what current Berkeley Unix systems do. In this case, the TTL value in the received packet will be 255 minus the number of routers in the path from the remote system to the pinging host.
• Set it to some other value. Some machines use the same value for ICMP packets that they use for TCP packets, for example either 30 or 60. Others may use completely wild values.

Additional notes

• Many hosts and gateways ignore the RECORD_ROUTE option.
• The maximum IP header length is too small for options like RECORD_ROUTE to be completely useful, although there’s not much that can be done about this.
• Flood pinging is not recommended in general, and flood pinging the broadcast address should only be done under very controlled conditions.

Examples

Ping the host google.com to see if it’s alive.

Ping the host google.com once. Output resembles the following:

Related pages

Related commands

host — Convert a hostname to an IP address and vice versa.
ifconfig — View or modify the configuration of network interfaces.
netstat — Print information about network connections, routing tables, interface statistics, masquerade connections, and multicast memberships.
rpcinfo — Report information about remote procedure calls.
traceroute — Trace the route that packets take to a remote host.

Источник