Linux set max open files

linux-notes.org

Несколько раз я сталкивался с ошибкой «Too many open files»(Слишком много открытых файлов) на сервере с высокой нагрузкой. Это означает, что сервер исчерпывает ресурс на максимальный предел открытых файлов (max open file limit). Теперь вопрос в том, как я могу увеличить лимиты открытых файлов на Linux? Да все очень просто, в своей статье «Увеличить Max Open File Limit в Unix/Linux» покажу как это выполняется.

Увеличить Max Open File Limit в Unix/Linux

Приведу команды на различные Unix/Linux ОС

Увеличить Max Open File Limit в Linux

Для начала проверим какой предел установлен в ОС:

Увеличиваем данный предел в Linux

Мы можем увеличить лимиты для открытых файлов:

-===ВРЕМЕННО===-

Если есть необходимость увеличить лимит временно (для тестирования, например), то можно это сделать так:

Вот еще один пример:

-===ПОСТОЯННО===-

Если есть необходимость увеличить лимит навсегда, то можно это сделать так:

Эти настройки будут сохраняться даже после перезагрузки системы. После добавления конфигурации в файл, выполните следующую команду, чтобы изменения вступили в силу:

Настройка лимитов для каждого пользователя

Проверка установленных лимитов

Используйте следующую команду, чтобы увидеть максимальное чисто для открытых файлов:

Подключаемся от пользователя (у меня это nginx):

Проверяем параметры Hard лимитов :

В консоле, можно ввести данную команду (очень удобно отображает):

Проверяем параметры лимитов Soft :

Увеличить Max Open File Limit в Mac OS X

Выполним проверку лимитов с помощью:

• Первый аргумент — soft limit.
• Второй аргумент — hard limit.

Можно прописать в файл:

Увеличюем nginx worker_rlimit_nofile в nginx ( на уровне Nginx)

В nginx также можно увеличить лимиты с директивой worker_rlimit_nofile, которая позволяет увеличить этот лимит, если это не хватает данного ресурса на лету на уровне процесса:

И прописываем (редактируем):

После чего, проверяем конфигурацию nginx и перезапускаем его:
Save and close the file. Reload nginx web server, enter:

В комментариях писали что нельзя установить данные лимиты для Kali Linux. Вот, решил показать наглядный пример:

ulimit в Kali Linux

Включение ограничений на основе PAM в Unix/Lixux

Для Debian/Ubuntu

Редактируем файл (Debian/Ubuntu):

Открываем еще один файл:

И, приводим к виду:

И выполняем рестарт:

Для CentOS/RedHat/Fedora

Редактируем файл (Debian/Ubuntu):

Открываем еще один файл:

И, приводим к виду:

И выполняем рестарт:

У меня все! Статья «Увеличить Max Open File Limit в Unix/Linux», завершено.

3 thoughts on “ Увеличить Max Open File Limit в Unix/Linux ”

в kali linux не работает смена хард и софт лимитов. всё равно пишет 4096 и 1024 соответственно.

Можно! Что-то делаете не так. Я выложил скриншот в статье и показал что можно все сделать.

Мужикам на картинке к статье явно не повезло.

Свет приглушён, явно видно зелёный оттенок табличек аварийного освещения — либо дело за полночь, либо у них блекаут и работают от дизеля.

Сидят за консолью. По сети, оно, похоже, уже не отвечает. Плохо дело.

Стул притащили. Значит, давно не отвечает. Надо было прописать MAX OPEN FILE LIMIT заранее, а не когда уже навернулось.

Добавить комментарий Отменить ответ

Этот сайт использует Akismet для борьбы со спамом. Узнайте, как обрабатываются ваши данные комментариев.

Источник

How to Increase Number of Open Files Limit in Linux

In Linux, you can change the maximum amount of open files. You may modify this number by using the ulimit command. It grants you the ability to control the resources available for the shell or process started by it.

In this short tutorial we will show you how to check your current limit of open files and files descriptions, but to do so, you will need to have root access to your system.

First, Lets see how we can find out the maximum number of opened file descriptors on your Linux system.

Find Linux Open File Limit

The value is stored in:

The number you will see, shows the number of files that a user can have opened per login session. The result might be different depending on your system.

For example on a CentOS server of mine, the limit was set to 818354, while on Ubuntu server that I run at home the default limit was set to 176772.

If you want to see the hard and soft limits, you can use the following commands:

Check Hard Limit in Linux

Check Soft Limits in Linux

To see the hard and soft values for different users, you can simply switch user with “su” to the user which limits you want to check.

How to Check System wide File Descriptors Limits in Linux

If you are running a server, some of your applications may require higher limits for opened file descriptors. A good example for such are MySQL/MariaDB services or Apache web server.

You can increase the limit of opened files in Linux by editing the kernel directive fs.file-max . For that purpose, you can use the sysctl utility.

For example, to increase open file limit to 500000, you can use the following command as root:

You can check the current value for opened files with the following command:

With the above command the changes you have made will only remain active until the next reboot. If you wish to apply them permanently, you will have to edit the following file:

Add the following line:

Of course, you can change the number per your needs. To verify the changes again use:

Users will need to logout and login again for the changes to take effect. If you want to apply the limit immediately, you can use the following command:

Set User Level Open File limits in Linux

The above examples, showed how to set global limits, but you may want to apply limits per user basis. For that purpose, as user root, you will need to edit the following file:

If you are a Linux administrator, I suggest you that you become very familiar with that file and what you can do to it. Read all of the comments in it as it provides great flexibility in terms of managing system resources by limiting users/groups on different levels.

The lines that you should add take the following parameters:

Here is an example of setting a soft and hard limits for user marin:

Final thoughts

This brief article showed you a basic example of how you can check and configure global and user level limits for maximum number of opened files.

While we just scratched the surface, I highly encourage you to have a more detailed look and read regarding /etc/sysctl.conf and /etc/security/limits.conf and learn how to use them. They will be of great help for you one day.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник

Linux Increase The Maximum Number Of Open Files / File Descriptors (FD)

H ow do I increase the maximum number of open files under CentOS Linux? How do I open more file descriptors under Linux?

The ulimit command provides control over the resources available to the shell and/or to processes started by it, on systems that allow such control. The maximum number of open file descriptors displayed with following command (login as the root user).

Command To List Number Of Open File Descriptors

Use the following command command to display maximum number of open file descriptors:
cat /proc/sys/fs/file-max
Output:

75000 files normal user can have open in single login session. To see the hard and soft values, issue the command as follows:
# ulimit -Hn
# ulimit -Sn
To see the hard and soft values for httpd or oracle user, issue the command as follows:
# su — username
In this example, su to oracle user, enter:
# su — oracle
$ ulimit -Hn
$ ulimit -Sn

System-wide File Descriptors (FD) Limits

The number of concurrently open file descriptors throughout the system can be changed via /etc/sysctl.conf file under Linux operating systems.

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

The Number Of Maximum Files Was Reached, How Do I Fix This Problem?

Many application such as Oracle database or Apache web server needs this range quite higher. So you can increase the maximum number of open files by setting a new value in kernel variable /proc/sys/fs/file-max as follows (login as the root):
# sysctl -w fs.file-max=100000
Above command forces the limit to 100000 files. You need to edit /etc/sysctl.conf file and put following line so that after reboot the setting will remain as it is:
# vi /etc/sysctl.conf
Append a config directive as follows:
fs.file-max = 100000
Save and close the file. Users need to log out and log back in again to changes take effect or just type the following command:
# sysctl -p
Verify your settings with command:
# cat /proc/sys/fs/file-max
OR
# sysctl fs.file-max

User Level FD Limits

The above procedure sets system-wide file descriptors (FD) limits. However, you can limit httpd (or any other users) user to specific limits by editing /etc/security/limits.conf file, enter:
# vi /etc/security/limits.conf
Set httpd user soft and hard limits as follows:
httpd soft nofile 4096
httpd hard nofile 10240
Save and close the file. To see limits, enter:
# su — httpd
$ ulimit -Hn
$ ulimit -Sn

A note about RHEL/CentOS/Fedora/Scientific Linux users

Edit /etc/pam.d/login file and add/modify the following line (make sure you get pam_limts.so):

Save and close the file.

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

How to set ulimit and file descriptors limit on Linux Servers

Introduction: Challenges like number of open files in any of the production environment has become common now a day. Since many applications which are Java based and Apache based, are getting installed and configured, which may lead to too many open files, file descriptors etc. If this exceeds the default limit that is set, then one may face access control problems and file opening challenges. Many production environments come to standstill kind of situations because of this.

Luckily, we have “ulimit” command in any of the Linux based server, by which one can see/set/get number of files open status/configuration details. This command is equipped with many options and with this combination one can set number of open files. Following are step-by-step commands with examples explained in detail.

To see what is the present open file limit in any Linux System

To get open file limit on any Linux server, execute the following command,

The above number shows that user can open ‘146013’ file per user login session.

This clearly indicates that individual Linux operating systems have different number of open files. This is based on dependencies and applications which are running in respective systems.

ulimit command :

As the name suggests, ulimit (user limit) is used to display and set resources limit for logged in user.When we run ulimit command with -a option then it will print all resources’ limit for the logged in user. Now let’s run “ulimit -a” on Ubuntu / Debian and CentOS systems,

Ubuntu / Debian System,

CentOS System

As we can be seen here different OS have different limits set. All these limits can be configured/changed using “ulimit” command.

To display the individual resource limit then pass the individual parameter in ulimit command, some of parameters are listed below:

• ulimit -n –> It will display number of open files limit
• ulimit -c –> It display the size of core file
• umilit -u –> It will display the maximum user process limit for the logged in user.
• ulimit -f –> It will display the maximum file size that the user can have.
• umilit -m –> It will display the maximum memory size for logged in user.
• ulimit -v –> It will display the maximum memory size limit

Use below commands check hard and soft limits for number of open file for the logged in user

How to fix the problem when limit on number of Maximum Files was reached ?

Let’s assume our Linux server has reached the limit of maximum number of open files and want to extend that limit system wide, for example we want to set 100000 as limit of number of open files.

Use sysctl command to pass fs.file-max parameter to kernel on the fly, execute beneath command as root user,

Above changes will be active until the next reboot, so to make these changes persistent across the reboot, edit the file /etc/sysctl.conf and add same parameter,

save and exit file,

Run the beneath command to make above changes into effect immediately without logout and reboot.

Now verify whether new changes are in effect or not.

Use below command to find out how many file descriptors are currently being utilized:

Note:- Command “sysctl -p” is used to commit the changes without reboot and logout.

Set User level resource limit via limit.conf file

“/etc/sysctl.conf” file is used to set resource limit system wide but if you want to set resource limit for specific user like Oracle, MariaDB and Apache then this can be achieved via “/etc/security/limits.conf” file.

Sample Limit.conf is shown below,

Let’s assume we want to set hard and soft limit on number of open files for linuxtechi user and for oracle user set hard and soft limit on number of open process, edit the file “/etc/security/limits.conf” and add the following lines

Save & exit the file.

Note: In case you want to put resource limit on a group instead of users, then it can also be possible via limit.conf file, in place of user name , type @ and rest of the items will be same, example is shown below,

Verify whether new changes are in effect or not,

Note: Other majorly used command is “ lsof ” which is used for finding out “how many files are opened currently”. This command is very helpful for admins.

Conclusion:

As mentioned in the introduction section “ulimit” command is very powerful and helps one to configure and make sure application installations are smoother without any bottlenecks. This command helps in fixing many of the number of file limitations in Linux based servers.

Источник