Linux show listen ports

4 Ways to Find Out What Ports Are Listening in Linux

The state of a port is either open, filtered, closed, or unfiltered. A port is said to be open if an application on the target machine is listening for connections/packets on that port.

In this article, we will explain four ways to check open ports and also will show you how to find which application is listening on what port in Linux.

1. Using Netstat Command

Netstat is a widely used tool for querying information about the Linux networking subsystem. You can use it to print all open ports like this:

The flag -l tells netstat to print all listening sockets, -t shows all TCP connections, -u displays all UDP connections and -p enables printing of application/program name listening on the port.

Check Open Ports Using Netstat Command

To print numeric values rather than service names, add the -n flag.

Show Numeric Values

You can also use grep command to find out which application is listening on a particular port, for example.

Find Port of Running Application

Alternatively, you can specify the port and find the application bound to, as shown.

Find Application Using a Port Number

2. Using ss Command

ss command is another useful tool for displaying information about sockets. It’s output looks similar to that of netstat. The following command will show all listening ports for TCP and UDP connections in numeric value.

Find Open Ports Using ss Command

3. Using Nmap Command

Nmap is a powerful and popular network exploration tool and port scanner. To install nmap on your system, use your default package manager as shown.

To scan all open/listening ports in your Linux system, run the following command (which should take a long time to complete).

4. Using lsof Command

The final tool we will cover for querying open ports is lsof command, which is used to list open files in Linux. Since everything is a file in Unix/Linux, an open file may be a stream or a network file.

To list all Internet and network files, use the -i option. Note that this command shows a mix of service names and numeric ports.

List Open Network Files Using lsof Command

To find which application is listening on a particular port, run lsof in this form.

Find Application Using Port

That’s all! In this article, we have explained four ways to check open ports in Linux. We also showed how to check which processes are bound upon particular ports. You can share your thoughts or ask any questions via the feedback form below.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник

3 Ways to Find Out Which Process Listening on a Particular Port

A port is a logical entity that represents an endpoint of communication and is associated with a given process or service in an operating system. In previous articles, we explained how to find out the list of all open ports in Linux and how to check if remote ports are reachable using the Netcat command.

In this short guide, we will show different ways of finding the process/service listening on a particular port in Linux.

1. Using netstat Command

netstat (network statistics) command is used to display information concerning network connections, routing tables, interface stats, and beyond. It is available on all Unix-like operating systems including Linux and also on Windows OS.

In case you do not have it installed by default, use the following command to install it.

Once installed, you can use it with the grep command to find the process or service listening on a particular port in Linux as follows (specify the port).

Check Port Using netstat Command

In the above command, the flags.

• l – tells netstat to only show listening sockets.
• t – tells it to display tcp connections.
• n – instructs it to show numerical addresses.
• p – enables showing of the process ID and the process name.
• grep -w – shows matching of exact string (:80).

Note: The netstat command is deprecated and replaced by the modern ss command in Linux.

2. Using lsof Command

lsof command (List Open Files) is used to list all open files on a Linux system.

To install it on your system, type the command below.

To find the process/service listening on a particular port, type (specify the port).

Find Port Using lsof Command

3. Using fuser Command

fuser command shows the PIDs of processes using the specified files or file systems in Linux.

You can install it as follows:

You can find the process/service listening on a particular port by running the command below (specify the port).

Then find the process name using PID number with the ps command like so.

Find Port and Process ID in Linux

You can also check out these useful guides about processes in Linux.

That’s all! Do you know of any other ways of finding the process/service listening on a particular port in Linux, let us know via the comment form below.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник

How to check if port is in use on Linux or Unix

H ow do I determine if a port is in use under Linux or Unix-like system? How can I verify which ports are listening on Linux server? How do I check if port is in use on Linux operating system using the CLI?

It is important you verify which ports are listening on the server’s network interfaces. You need to pay attention to open ports to detect an intrusion. Apart from an intrusion, for troubleshooting purposes, it may be necessary to check if a port is already in use by a different application on your servers. For example, you may install Apache and Nginx server on the same system. So it is necessary to know if Apache or Nginx is using TCP port # 80/443. This quick tutorial provides steps to use the netstat, nmap and lsof command to check the ports in use and view the application that is utilizing the port.

Tutorial details
Difficulty level	Easy
Root privileges	Yes
Requirements	lsof, ss, and netstat on Linux
Est. reading time	3 minutes

How to check if port is in use in

To check the listening ports and applications on Linux:

1. Open a terminal application i.e. shell prompt.
2. Run any one of the following command on Linux to see open ports:
   sudo lsof -i -P -n | grep LISTEN
   sudo netstat -tulpn | grep LISTEN
   sudo ss -tulpn | grep LISTEN
   sudo lsof -i:22 ## see a specific port such as 22 ##
   sudo nmap -sTU -O IP-address-Here
3. For the latest version of Linux use the ss command. For example, ss -tulw

Let us see commands and its output in details.

Option #1: lsof command

The syntax is:
$ sudo lsof -i -P -n
$ sudo lsof -i -P -n | grep LISTEN
$ doas lsof -i -P -n | grep LISTEN ### [OpenBSD] ###
Sample outputs:

Fig.01: Check the listening ports and applications with lsof command

Option #2: netstat command

You can check the listening ports and applications with netstat as follows.

Linux netstat syntax

Run netstat command along with grep command to filter out port in LISTEN state:
$ netstat -tulpn | grep LISTEN
The netstat command deprecated for some time on Linux. Therefore, you need to use the ss command as follows:
sudo ss -tulw
sudo ss -tulwn
sudo ss -tulwn | grep LISTEN

Where, ss command options are as follows:

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

• -t : Show only TCP sockets on Linux
• -u : Display only UDP sockets on Linux
• -l : Show listening sockets. For example, TCP port 22 is opened by SSHD server.
• -p : List process name that opened sockets
• -n : Don’t resolve service names i.e. don’t use DNS

FreeBSD/MacOS X netstat syntax

$ netstat -anp tcp | grep LISTEN
$ netstat -anp udp | grep LISTEN

OpenBSD netstat syntax

$ netstat -na -f inet | grep LISTEN
$ netstat -nat | grep LISTEN

Option #3: nmap command

The syntax is:
$ sudo nmap -sT -O localhost
$ sudo nmap -sU -O 192.168.2.13 ##[ list open UDP ports ]##
$ sudo nmap -sT -O 192.168.2.13 ##[ list open TCP ports ]##
Sample outputs:

Fig.02: Determines which ports are listening for TCP connections using nmap

A note about Windows users

You can check port usage from Windows operating system using following command:
netstat -bano | more
netstat -bano | grep LISTENING
netstat -bano | findstr /R /C:»[LISTEING]»

Conclusion

This page explained command to determining if a port is in use on Linux or Unix-like server. For more information see the nmap command and lsof command page online here

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

Find Out What Ports Are Listening / Open On My Linux & FreeBSD Server

netstat command to find open ports

The syntax is:
# netstat —listen
OR
# netstat -l
Sample outputs from my Debian 8.x Linux server:

To display open ports and established TCP connections, enter:
$ netstat -vatn
To display only open UDP ports try the following command:
$ netstat -vaun
If you want to see FQDN (full dns hostname), try removing the -n flag:
$ netstat -vat
FreeBSD/OS X Unix user try the following command:
$ netstat -na | grep -i LISTEN
$ netstat -f inet -na | grep -i LISTEN
Sample outputs:

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

lsof Command Examples

To display the list of open ports, enter:
# lsof -i
To display all open files, use:
# lsof
To display all open IPv4 network files in use by the process whose PID is 9255, use:
# lsof -i 4 -a -p 9255
Another example:
# lsof -iTCP -sTCP:LISTEN
Sample outputs:

A Note About FreeBSD Users

Fig.01: sockstat command on FreeBSD

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Category	List of Unix and Linux commands
Documentation	help • mandb • man • pinfo
Disk space analyzers	df • duf • ncdu • pydf
File Management	cat • cp • less • mkdir • more • tree
Firewall	Alpine Awall • CentOS 8 • OpenSUSE • RHEL 8 • Ubuntu 16.04 • Ubuntu 18.04 • Ubuntu 20.04
Linux Desktop Apps	Skype • Spotify • VLC 3
Modern utilities	bat • exa
Network Utilities	NetHogs • dig • host • ip • nmap
OpenVPN	CentOS 7 • CentOS 8 • Debian 10 • Debian 8/9 • Ubuntu 18.04 • Ubuntu 20.04
Package Manager	apk • apt
Processes Management	bg • chroot • cron • disown • fg • glances • gtop • jobs • killall • kill • pidof • pstree • pwdx • time • vtop
Searching	ag • grep • whereis • which
Shell builtins	compgen • echo • printf
Text processing	cut • rev
User Information	groups • id • lastcomm • last • lid/libuser-lid • logname • members • users • whoami • who • w
WireGuard VPN	Alpine • CentOS 8 • Debian 10 • Firewall • Ubuntu 20.04

Comments on this entry are closed.

I used lsof command in freebsd 5 i am not getting any output for checking tcp/udp ports which are listening or open on my server

Yes, you must be root and use sockstat command.

What is the equivalent port for com9 on linux?How do i find out com port equivalents in linux?Thanks

on FreeBSD you can also use sockstat to list open sockets

correction :- should be
netstat -l, –listening :- to get list the listening sockets.

lsof -i (to get an idea of ports out there)

netstat -a | grep
example: netstat -a | grep 4449

If nothing is returned like below the port is free
$ netstat -a | grep 4449
$

My name is Jacob and I’m running a hosting business. I have 2 dedicated servers at the moment and they’re both Linux Debian 6.0. I have some troubles with my dedicated IP’s. Some server on my dedicated server is having the port 0000 or 0. It takes all the dedicated IP’s and I don’t know how to find where its located or how to close it. I know the pid and I can see it’s running some where but the location I cant see. Please help me. It’s a big problem I’ve been trying to figure out.

there are some command to find out the all open port…bt there have any command to find out all the port,which are listing or not?that means have any command to show list of all ports.

Try this:
open tcp, udp, listening, program, numeric, ipv4
netstat -tulpn4

how do i find out what ports are listeningopen/off on my linuxfreebsd server?how do i find the port,which are not listening.i just want to see list of all port.

Источник