Linux top sort by cpu

15 simple TOP command examples on Linux to monitor processes

Linux TOP command

One of the most basic command to monitor processes on Linux is the top command. As the name suggests, it shows the top processes based on certain criterias like cpu usage or memory usage.

The processes are listed out in a list with multiple columns for details like process name, pid, user, cpu usage, memory usage.

Apart from the list of processes, the top command also shows brief stats about average system load, cpu usage and ram usage on the top.

This post shows you some very simple examples of how to use the top command to monitor processes on your linux machine or server.

Note your «top» command variant

Be aware that the top command comes in various variants and each has a slightly different set of options and method of usage.

To check your top command version and variant use the -v option

This post focuses on the top command coming from the procps-ng project. This is the version available on most modern distros like Ubunut, Fedora, CentOS etc.

1. Display processes

To get a glimpse of the running processes, just run the top command as is without any options like this.

And immediately the output would be something like this —

The screen contains a lot of information about the system. The header areas include uptime, load average, cpu usage, memory usage data.

The process list shows all the processes with various process specific details in separate columns.
Some of the column names are pretty self explanatory.

PID — Process ID
USER — The system user account running the process.
%CPU — CPU usage by the process.
%MEM — Memory usage by the process
COMMAND — The command (executable file) of the process

2. Sort by Memory/Cpu/Process ID/Running Time

To find the process consuming the most cpu or memory, simply sort the list.

Press M key ( yes, in capital, not small ) to sort the process list by memory usage. Processes using the most memory are shown first and rest in order.

Here are other options to sort by CPU usage, Process ID and Running Time —

Press ‘P’ — to sort the process list by cpu usage.
Press ‘N’ — to sort the list by process id
Press ‘T’ — to sort by the running time.

3. Reverse the sorting order — ‘R’

By default the sorting is done in descending order. Pressing ‘R’ shall reverse the sorting order of the currently sorted column

Here is the output sorted in ascending order of cpu usage. Processes consuming the least amount of cpu are shown first.

4. Highlight the sorted column with bold text — ‘x’

Press x, to highlight the values in the sort column with bold text. Here is a screenshot, with the memory column in bold text —

top command highlight column

5. Highlight sorted column background color ‘b’

After highlighting the sorted column with bold font, its further possible to highlight with a different background color as well. This is how it looks

Top command highlight column background

6. Change the update delay — ‘d’

The top command updates the information on the screen every 3.0 seconds by default. This refresh interval can be changed.

Press the ‘d’ key, and top will ask you to enter the time interval between each refresh. You can enter numbers smaller than 1 second as well, like 0.5. Enter the desired interval and hit Enter.

7. Filter or Search processes — ‘o’/’O’

You can filter the process list based on various criterias like process name, memory usage, cpu usage etc. Multiple filter criterias can be applied.

Press the ‘o’ or ‘O’ to activate filter prompt. It will show a line indicating the filter format like this —

Then enter a filter like this and hit Enter.

COMMAND=apache

Now top will show only those processes whose COMMAND field contains the value apache.

Here is another filter example that shows processes consuming CPU actively —

%CPU>0.0

See active filters — Press Ctrl+o to see currently active filters

Clear filter — Press ‘=’ key to clear any active filters

8. Display full command path and arguments of process — ‘c’

Press ‘c’ to display the full command path along with the commandline arguments in the COMMAND column.

9. View processes of a user — ‘u’/’U’

To view the processes of a specific user only, press ‘u’ and then top will ask you to enter the username.

Which user (blank for all)
Enter the desired username and hit Enter.

10. Toggle the display of idle processes — ‘i’

Press ‘i’ to toggle the display of idle/sleeping processes. By default all processes are display.

11. Hide/Show the information on top — ‘l’, ‘t’, ‘m’

The ‘l’ key would hide the load average information.
The ‘m’ key will hide the memory information.
The ‘t’ key would hide the task and cpu information.

Hiding the header information area, makes more processes visible in the list.

12. Forest mode — ‘V’

Pressing ‘V’ will display the processes in a parent child hierarchy. It looks something like this —

13. Change the number of processes to display — ‘n’

Lets say you want to monitor only few processes based on a certain filter criteria. Press ‘n’ and enter the number of processes you wish to display.

It will display a line saying —
Maximum tasks = 0, change to (0 is unlimited)

14. Display all CPU cores — ‘1’

Pressing ‘1’ will display the load information about individual cpu cores. Here is how it looks —

15. Show/Hide columns ‘f’

By default top displays only few columns out of many more that it can display. If you want to add or remove a particular column or change the order of columns, then press f

The fields marked * or bold are the fields that are displayed, in the order in which they appear in this list.

Navigate the list using up/down arrow keys and press ‘d’ to toggle the display of that field. Once done, press q to go back to the process list

The following output displays only PID, USER, CPU, MEMORY and COMMAND columns.

16. Batch mode

Top also supports batch mode output, where it would keep printing information sequentially instead of a single screen. This is useful when you need to log the top output for later analysis of some kind.

Here is a simple example that shows the Cpu usage at intervals of 1 second.

17. Split output in multiple panels — ‘A’

Each panel can be sorted on a different column. Press ‘a’ to move through the panels. Each panel can have a different set of fields displayed and different sort columns.

top command multiple panels

Conclusion

Top is a great commandline tool to check system resource usage and process details. Its often used on servers for monitoring and quick diagnosis.

If you are looking for something easier with a better user interface then try htop. Htop has a intuitive user interface, where you need not memorize keyboard shortcuts. Htop has onscreen instructions that guide you on how to use it.

A Tech Enthusiast, Blogger, Linux Fan and a Software Developer. Writes about Computer hardware, Linux and Open Source software and coding in Python, Php and Javascript. He can be reached at [email protected] .

10 thoughts on “ 15 simple TOP command examples on Linux to monitor processes ”

Nice article and great explanation.

if same user id is running multiple times how to delete all others except one.Please any one reply me fast.
exp
PID USER PR %cpu
QPD02201
QPD02201
QPD02201
QPD02201

A really top article!

Hi, thanks for the great article but I’m still looking for an answer for my case: It looks like that all the time. CPU load is around 45-50% all the time but if I add up the CPU usage of the services it never gets close… Why’s that?

Tasks: 251 total, 1 running, 250 sleeping, 0 stopped, 0 zombie
%Cpu0 : 50,1 us, 10,1 sy, 0,0 ni, 39,8 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st
%Cpu1 : 55,7 us, 7,2 sy, 0,0 ni, 36,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st
%Cpu2 : 35,6 us, 4,4 sy, 0,0 ni, 58,8 id, 0,0 wa, 0,0 hi, 1,2 si, 0,0 st
%Cpu3 : 36,7 us, 5,8 sy, 0,0 ni, 56,9 id, 0,0 wa, 0,0 hi, 0,6 si, 0,0 st
KiB Mem : 16242248 total, 12711832 free, 2071424 used, 1458992 buff/cache
KiB Swap: 3809276 total, 3809276 free, 0 used. 13807884 avail Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9066 root 20 0 830468 35332 25632 S 2,2 0,2 2:19.18 metricbeat
5428 www-data 20 0 72168 27716 2520 S 1,2 0,2 3:28.49 kix.Daemon.pl
590 kopano 20 0 291488 41016 24640 S 0,6 0,3 1:27.52 kopano-search
581 kopano 20 0 355280 38644 18984 S 0,4 0,2 1:27.69 kopano-presence
7 root 20 0 0 0 0 S 0,2 0,0 0:31.24 rcu_sched
580 root 20 0 250116 4332 2508 S 0,2 0,0 0:01.37 rsyslogd
821 postgres 20 0 268376 6448 4688 S 0,2 0,0 0:00.07 postgres
1569 mysql 20 0 739704 114760 17024 S 0,2 0,7 0:38.78 mysqld
1802 root 20 0 392128 12028 6828 S 0,2 0,1 0:08.35 docker-containe
1875 root 20 0 3125288 23428 9428 S 0,2 0,1 0:40.27 slapd
2043 root 20 0 818760 70340 28176 S 0,2 0,4 0:37.41 named
2686 kdm 20 0 392288 59108 33904 S 0,2 0,4 0:29.23 kdm_greet
2871 root 20 0 4822492 437276 23464 S 0,2 2,7 2:01.74 java
9560 root 20 0 588668 69552 22952 S 0,2 0,4 0:40.12 packetbeat
10650 root 20 0 38144 3588 3012 R 0,2 0,0 0:04.37 top

Maybe it looks better like this

%Cpu0 : 50,1 us, 10,1 sy,
%Cpu1 : 55,7 us, 7,2 sy,
%Cpu2 : 35,6 us, 4,4 sy,
%Cpu3 : 36,7 us, 5,8 sy,

Источник

How to use top sort by cpu and by memory in linux

Linux top command plays a vital role in daily monitoring of server status.

This linux tutorial mainly shares with you how to sort the linux system CPU usage or memory usage when using the linux top command.

top sort by CPU in linux

A leading ‘+’ will force sorting high to low, whereas a ‘-” will ensure a low to high ordering.

top sort by memory in linux

top sort by pid in linux

top command supports sorted fields

Descriptions of fields

• PID: Shows task’s unique process id.
• USER: User name of owner of task.
• PR: Stands for priority of the task.
• NI: Represents a Nice Value of task. A Negative nice value implies higher priority, and positive Nice value means lower priority.
• VIRT: Total virtual memory used by the task.
• RES: Resident Memory Size (KiB).
• SHR: Represents the Shared Memory size (kb) used by a task.
• S : Process Status. The status of the task which can be one of:
  • D = uninterruptible sleep
  • I = idle
  • R = running
  • S = sleeping
  • T = stopped by job control signal
  • t = stopped by debugger during trace
  • Z = zombie
• %CPU: Represents the CPU usage.
• %MEM: Shows the Memory usage of task.
• TIME+: CPU Time, the same as ‘TIME’, but reflecting more granularity through hundredths of a second.
• COMMAND: Command Name or Command Line.

Best linux commands articles:

Источник

Sany’s Linux and Open Source Blog

Linux and Open Source Blog

Top command to sort by cpu/memory

top is command in to view processin running in a Linux machine.

Its will get dynamic real-time view of all process running in a Linux machine.

Run top command in your Linux machine and output should look like below:

Tasks: 233 total, 3 running, 230 sleeping, 0 stopped, 0 zombie
Cpu(s): 55.5%us, 3.9%sy, 0.0%ni, 40.5%id, 0.2%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 5880784k total, 5432556k used, 448228k free, 169636k buffers
Swap: 9764860k total, 0k used, 9764860k free, 1315972k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2368 guest 20 0 996m 216m 47m R 96 3.8 420:25.79 thunderbird
2431 guest 20 0 1702m 717m 54m S 11 12.5 38:10.37 firefox
1106 root 20 0 186m 25m 9.8m S 7 0.4 22:45.97 Xorg
6243 guest 20 0 731m 36m 25m R 2 0.6 0:04.93 yakuake
3422 guest 20 0 1029m 191m 23m S 1 3.3 2:43.51 chrome
1692 guest 20 0 752m 21m 14m S 0 0.4 0:07.87 gnome-settings-
2502 guest 20 0 748m 143m 45m S 0 2.5 2:56.74 chrome
2640 guest 20 0 928m 84m 21m S 0 1.5 0:08.87 chrome
2781 guest 20 0 972m 124m 21m S 0 2.2 1:38.58 chrome
2907 guest 20 0 999m 60m 12m S 0 1.1 1:00.70 chrome
3352 guest 20 0 928m 72m 21m S 0 1.3 0:06.46 chrome
6286 guest 20 0 1290m 41m 26m S 0 0.7 0:00.45 knotify4
1 root 20 0 24456 2432 1356 S 0 0.0 0:00.68 init
2 root 20 0 0 0 0 S 0 0.0 0:00.18 kthreadd

By default top output is sorted with CPU usage.

There are lot of options available with which we can sort top output based on our requirement.

To view all available options run top command and then press shift + o OR O, it will display all possible fields which can used to sort.

If you want to sort all processes with memory usage run top command then press “O” and then press “n” and enter. Now the output is sorted and displayed based on memory consumption of a process.

To quit from from top’s real time view just press “q”.

Ubuntu 14.04 tip to sort by cpu/memory:

Ubuntu 14.04 comes with top 3.3.9 version where shift + o OR O won’t work.

Here you need to use F to sort with cpu/memory. First run top command, press F then select cpu/memory by using up/down arrows and press s to set sort, use Esc/q to end.

This will sort top output according to your selection.

Источник