Linux view open ports

How to Find Out List of All Open Ports in Linux

In this article, we will briefly talk about ports in computer networking and move to how you can list all open ports in Linux.

In computer networking, and more definitely in software terms, a port is a logical entity which acts as a endpoint of communication to identify a given application or process on an Linux operating system. It is a 16-bit number (0 to 65535) which differentiates one application from another on end systems.

The two most popular Internet transport protocols, Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP) and other less known protocols use port numbers for communication sessions (source and destination port numbers in conjunction with the source and destination IP addresses).

In addition, a combination of an IP address, port and protocol such as TCP/UDP is known as a socket, and every service must have a unique socket.

Below are the different categories of ports:

1. 0-1023 – the Well Known Ports, also referred to as System Ports.
2. 1024-49151 – the Registered Ports, also known as User Ports.
3. 49152-65535 – the Dynamic Ports, also referred to as the Private Ports.

You can view a list of different applications and port/protocol combination in /etc/services file in Linux using cat command:

To list all open ports or currently running ports including TCP and UDP in Linux, we will use netstat, is a powerful tool for monitoring network connections and statistics.

1. -l – prints only listening sockets
2. -n – shows port number
3. -t – enables listing of tcp ports
4. -u – enables listing of udp ports

You can also use ss command, a well known useful utility for examining sockets in a Linux system. Run the command below to list all your open TCP and UCP ports:

Make it a point to read through the man pages of the commands above for more usage information.

In summary, understanding the concept of ports in computer networking is very vital for system and network administrators. You can as well go through this netstat guide with simple, precise and well explained examples.

Last but not least, get in touch with us by sharing other methods for listing open ports in Linux or asking a question via the response form below.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник

How to check if port is in use on Linux or Unix

H ow do I determine if a port is in use under Linux or Unix-like system? How can I verify which ports are listening on Linux server? How do I check if port is in use on Linux operating system using the CLI?

It is important you verify which ports are listening on the server’s network interfaces. You need to pay attention to open ports to detect an intrusion. Apart from an intrusion, for troubleshooting purposes, it may be necessary to check if a port is already in use by a different application on your servers. For example, you may install Apache and Nginx server on the same system. So it is necessary to know if Apache or Nginx is using TCP port # 80/443. This quick tutorial provides steps to use the netstat, nmap and lsof command to check the ports in use and view the application that is utilizing the port.

Tutorial details
Difficulty level	Easy
Root privileges	Yes
Requirements	lsof, ss, and netstat on Linux
Est. reading time	3 minutes

How to check if port is in use in

To check the listening ports and applications on Linux:

1. Open a terminal application i.e. shell prompt.
2. Run any one of the following command on Linux to see open ports:
   sudo lsof -i -P -n | grep LISTEN
   sudo netstat -tulpn | grep LISTEN
   sudo ss -tulpn | grep LISTEN
   sudo lsof -i:22 ## see a specific port such as 22 ##
   sudo nmap -sTU -O IP-address-Here
3. For the latest version of Linux use the ss command. For example, ss -tulw

Let us see commands and its output in details.

Option #1: lsof command

The syntax is:
$ sudo lsof -i -P -n
$ sudo lsof -i -P -n | grep LISTEN
$ doas lsof -i -P -n | grep LISTEN ### [OpenBSD] ###
Sample outputs:

Fig.01: Check the listening ports and applications with lsof command

Option #2: netstat command

You can check the listening ports and applications with netstat as follows.

Linux netstat syntax

Run netstat command along with grep command to filter out port in LISTEN state:
$ netstat -tulpn | grep LISTEN
The netstat command deprecated for some time on Linux. Therefore, you need to use the ss command as follows:
sudo ss -tulw
sudo ss -tulwn
sudo ss -tulwn | grep LISTEN

Where, ss command options are as follows:

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

• -t : Show only TCP sockets on Linux
• -u : Display only UDP sockets on Linux
• -l : Show listening sockets. For example, TCP port 22 is opened by SSHD server.
• -p : List process name that opened sockets
• -n : Don’t resolve service names i.e. don’t use DNS

FreeBSD/MacOS X netstat syntax

$ netstat -anp tcp | grep LISTEN
$ netstat -anp udp | grep LISTEN

OpenBSD netstat syntax

$ netstat -na -f inet | grep LISTEN
$ netstat -nat | grep LISTEN

Option #3: nmap command

The syntax is:
$ sudo nmap -sT -O localhost
$ sudo nmap -sU -O 192.168.2.13 ##[ list open UDP ports ]##
$ sudo nmap -sT -O 192.168.2.13 ##[ list open TCP ports ]##
Sample outputs:

Fig.02: Determines which ports are listening for TCP connections using nmap

A note about Windows users

You can check port usage from Windows operating system using following command:
netstat -bano | more
netstat -bano | grep LISTENING
netstat -bano | findstr /R /C:»[LISTEING]»

Conclusion

This page explained command to determining if a port is in use on Linux or Unix-like server. For more information see the nmap command and lsof command page online here

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

How to check open ports in Linux using the CLI

I need to list all open ports in Linux cloud server. How do I check open ports in Linux using the CLI? Can you give me the command to check open ports in Linux operating system?

To troubleshoot server problems and to avoid security issue, one needs to find out open TCP and UDP ports. In this tutorial, you will learn the different Linux commands to check open ports in Linux for auditing and securing the server.

Tutorial details
Difficulty level	Easy
Root privileges	Yes
Requirements	Linux command line
Est. reading time	5 minutes

What the hell are a TCP and UDP ports?

A port is nothing but a 16-bit number between 0 to 65535. For example, TCP port number 22 may be forwarded to the OpenSSH server. Therefore, 22 port number is a way to identify the sshd (OpenSSH server) process.

Port numbers

• The Well Known Ports are those from 0 through 1023.
• The Registered Ports are those from 1024 through 49151.
• The Dynamic and Private Ports are those from 49152 through 65535.

A registered port is a network port assigned by the Internet Assigned Numbers Authority (IANA) and stored in /etc/services file. Use the cat command or grep command/egrep command to view port numbers and service mappings:

Display a list of applications and their ports assigned by IANA

Check open ports in Linux

The procedure to monitor and display open ports in Linux is as follows:

1. Open a Linux terminal application
2. Use ss command to display all open TCP and UDP ports in Linux.
3. Another option is to use the netstat command to list all ports in Linux.
4. Apart from ss / netstat one can use the lsof command to list open files and ports on Linux based system.
5. Finally, one can use nmap command to check TCP and UDP ports too.

Let us see all commands and examples in details.

Using netstat to list open ports

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

• -t : All TCP ports
• -u : All UDP ports
• -l : Display listening server sockets
• -p : Show the PID and name of the program to which each socket belongs
• -n : Don’t resolve names
• | grep LISTEN : Only display open ports by applying grep command filter.

Use ss to list open ports

The ss command is used to dump socket statistics. It allows showing information similar to netstat. It can display more TCP and state information than other tools. The syntax is:
sudo ss -tulpn
Sample outputs:

Listening ports and applications using lsof command

Let us run the following to check open TCP and UDP ports using the lsof command:
sudo lsof -i -P -n | grep LISTEN

Where,

• -i : Look for listing ports
• -P : Inhibits the conversion of port numbers to port names for network files. Inhibiting the conversion may make lsof run a little faster. It is also useful when port name lookup is not working properly.
• -n : Do not use DNS name
• | grep LISTEN : Again only show ports in LISTEN state using the grep command as filter.

nmap command

In addition, to above commands one can use the nmap command which is an open source tool for network exploration and security auditing. We are going to use nmap to find and list open ports in Linux:
$ sudo nmap -sT -O localhost
$ sudo nmap -sU -O 192.168.2.254 ##[ list open UDP ports ]##
$ sudo nmap -sT -O 127.0.0.1 ##[ list open TCP ports ]##
$ sudo nmap -sTU -O 192.168.2.24
Sample outputs:

The open port doesn’t mean anyone from outside can access those ports

So far, you know how to find and list open TCP and UDP ports on Linux. However, those ports can still be blocked by software, cloud, or hardware firewall. Hence, you need to verify that your corporate firewall is not blocking incoming or outgoing access. For instance on Linux server we list or dump firewall rules using the following syntax:
sudo iptables -S
# IPv6
sudo ip6tables -S

Conclusion

In conclusion, finding out open ports is one of the most fundamental duties of a Linux system administrator for security reasons. Therefore, close down all unwanted ports and configure firewall such as UFW and FirewallD to open or block ports as per your requirements. After reading this tutorial, you should have a good understanding of how to check for open ports in Linux. See IANA’s offical list of TCP, UDP and other ports here for more information.

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

Find Out What Ports Are Listening / Open On My Linux & FreeBSD Server

netstat command to find open ports

The syntax is:
# netstat —listen
OR
# netstat -l
Sample outputs from my Debian 8.x Linux server:

To display open ports and established TCP connections, enter:
$ netstat -vatn
To display only open UDP ports try the following command:
$ netstat -vaun
If you want to see FQDN (full dns hostname), try removing the -n flag:
$ netstat -vat
FreeBSD/OS X Unix user try the following command:
$ netstat -na | grep -i LISTEN
$ netstat -f inet -na | grep -i LISTEN
Sample outputs:

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

lsof Command Examples

To display the list of open ports, enter:
# lsof -i
To display all open files, use:
# lsof
To display all open IPv4 network files in use by the process whose PID is 9255, use:
# lsof -i 4 -a -p 9255
Another example:
# lsof -iTCP -sTCP:LISTEN
Sample outputs:

A Note About FreeBSD Users

Fig.01: sockstat command on FreeBSD

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Category	List of Unix and Linux commands
Documentation	help • mandb • man • pinfo
Disk space analyzers	df • duf • ncdu • pydf
File Management	cat • cp • less • mkdir • more • tree
Firewall	Alpine Awall • CentOS 8 • OpenSUSE • RHEL 8 • Ubuntu 16.04 • Ubuntu 18.04 • Ubuntu 20.04
Linux Desktop Apps	Skype • Spotify • VLC 3
Modern utilities	bat • exa
Network Utilities	NetHogs • dig • host • ip • nmap
OpenVPN	CentOS 7 • CentOS 8 • Debian 10 • Debian 8/9 • Ubuntu 18.04 • Ubuntu 20.04
Package Manager	apk • apt
Processes Management	bg • chroot • cron • disown • fg • glances • gtop • jobs • killall • kill • pidof • pstree • pwdx • time • vtop
Searching	ag • grep • whereis • which
Shell builtins	compgen • echo • printf
Text processing	cut • rev
User Information	groups • id • lastcomm • last • lid/libuser-lid • logname • members • users • whoami • who • w
WireGuard VPN	Alpine • CentOS 8 • Debian 10 • Firewall • Ubuntu 20.04

Comments on this entry are closed.

I used lsof command in freebsd 5 i am not getting any output for checking tcp/udp ports which are listening or open on my server

Yes, you must be root and use sockstat command.

What is the equivalent port for com9 on linux?How do i find out com port equivalents in linux?Thanks

on FreeBSD you can also use sockstat to list open sockets

correction :- should be
netstat -l, –listening :- to get list the listening sockets.

lsof -i (to get an idea of ports out there)

netstat -a | grep
example: netstat -a | grep 4449

If nothing is returned like below the port is free
$ netstat -a | grep 4449
$

My name is Jacob and I’m running a hosting business. I have 2 dedicated servers at the moment and they’re both Linux Debian 6.0. I have some troubles with my dedicated IP’s. Some server on my dedicated server is having the port 0000 or 0. It takes all the dedicated IP’s and I don’t know how to find where its located or how to close it. I know the pid and I can see it’s running some where but the location I cant see. Please help me. It’s a big problem I’ve been trying to figure out.

there are some command to find out the all open port…bt there have any command to find out all the port,which are listing or not?that means have any command to show list of all ports.

Try this:
open tcp, udp, listening, program, numeric, ipv4
netstat -tulpn4

how do i find out what ports are listeningopen/off on my linuxfreebsd server?how do i find the port,which are not listening.i just want to see list of all port.

Источник