Содержание

Lynx one drivers windows 10
Released: January 17, 2019
System requirements: Windows 7 or higher
Новые драйвера для LynxTWO/Lynx L22/Lynx AES16 (1 онлайн
Rogovich
popedit
I-Gor-Ok
Lynx one drivers windows 10

Lynx one drivers windows 10

Released: January 17, 2019

System requirements: Windows 7 or higher

This driver is signed with a SHA-2 digital certificate. Early versions of Windows 7 do not support SHA-2 digital certificates, so Windows 7 requires a specific patch to support SHA-2 digital certificates. Please see Microsoft Security Advisory 3033929 for more information.

Version 2.0 Build 23j January 17, 2019
1. OpenGL version is now checked for both Lynx Mixer and Hilo Remote. If the video card driver doesn’t support at least OpenGL 2 then the app falls back to non-OpenGL. OpenGL can be manually disabled by editing the file with Notepad while Lynx Mixer is closed:
C:\Users\USERNAME\AppData\Roaming\Lynx\LynxMixer.xml
and changing UseOpenGL from 1 to 0 like:

2. Transmit FIFO full check now performed for internal MIDI connection on LT-TB.
3. 8-stereo-device operation now possible on E44.
4. Added Microsoft cross-signing certificate for Windows 10 OEM builds up to 1809 (RS5). If your computer has secure boot enabled, you must either disable secure boot or use Build 23b (which has a grandfathered signing certificate)
5. Version of files in device manager now reports 2.0.23.10.

Version 2.0 Build 23i July 12, 2017
1. Fixed issue with E44/E22 that may have caused the trim to report the incorrect status on boot.
2. Added support for LM-DIG in Aurora (n) -TB.

Version 2.0 Build 23h August 24, 2017
1. Fixed issue with ASIO driver that would cause the first interrupt to be ignored on startup for PCI Express cards with DMAV2Plus firmware (this caused no issues for any application except for one custom OEM application).

Version 2.0 Build 23g July 12, 2017

1. Added Microsoft cross-signing certificate for Windows 10 OEM builds. If your computer has secure boot enabled, you must either disable secure boot or use Build 23b.

2. Fixed issue with LMixer.exe About box to show device name.

3. Fixed issue created with Build 23f that might cause a BSOD on start of play/record for PCI cards.

Version 2.0 Build 23f June 29, 2017

1. Added work-around for CPU usage issue with ProTools 12.5 and up.

2. Changed default Hardware Buffer Size to be dependent on ASIO buffer size instead of sample rate.

Version 2.0 Build 23e June 2, 2017

1. Added support for Aurora (n) -TB.

Version 2.0 Build 23d Janunary 31, 2017

1. Added tables for additional sample rates for E44/E22.

Version 2.0 Build 23c June 29, 2016

1. Fixed issue created in Build 23b that caused PCI cards to use WavePCI instead of WaveRT on Windows Vista and higher.

2. LynxTrayVolume.exe now launches LynxMixer.exe instead of LMixer.exe upon double-click.

3. Changed to SHA256 (SHA-2) digital certificate.

Version 2.0 Build 23b May 27, 2016

1. Added ability to change channel mode on E22 and E44. E22 can now do 2 or 4 channel mode. E44 can now do 2, 4 or 8 channel mode.

2. Driver now enables record device for DMAV2PLUS firmware if the application did not already enable a record device. Since newer DMAV2PLUS firmware depend on record device timing, a record device must always be enabled.

Version 2.0 Build 23a November 30, 2015

1. Fixed issue with topology driver that would change the wrong controls for the source volumes.

2. Change the topology driver to always report the number of channels at either 8 or NumberOfWDMDevices * 2 (whichever is less). This corrects an issue where Windows would always show the number of volume controls for the first device as two instead of the number of channels that are selected in the Windows Sounds Control Panel.

3. Added work-around for issue with Adobe Audition CC 2014 and up that would cause the ASIO driver to not load properly.

4. Added work-around for issue with ProTools 11 and up that would cause the ASIO driver to occasionally not load properly on an Aurora ™ -TB.

Version 2.0 Build 23 August 27, 2015

1. Added support for DMAV2PLUS for AES16e/LT-TB/E44/E22.
DMAV2PLUS supports the following features:
– 5.1 support for WaveRT (6-channel interleaved)
– Smaller transfer sizes to reduce latency to under 1ms round-trip (96kHz, 32 sample buffer)
DMAV2PLUS is supported with the following firmware:
AES16e: 14.0
LT-TB: 6.0
E44/E22: 2.0

2. Added new controls in Lynx Mixer to support DMAV2PLUS. Settings > Advanced > Hardware Buffer Size. This settings should be left at ‘Auto’ unless you are working with Lynx Technical Support on a specific issue. Changing this control sets the amount of audio buffered in the hardware. The smaller the number the faster the CPU must respond to interrupts before audio breaks up.

3. Added additional check for PCI cards on startup of Lynx Mixer.exe to automatically launch LMixer.exe if no PCI Express devices are detected.

4. ASIO driver now allows buffer sizes from 32 up to 8192 samples for DMAV2 and DMAV2PLUS devices. Previously this was set from 32 to 1024.

5. ASIO driver cannot mix DMAV2 and DMAV2PLUS devices along with standard DMA devices. All devices must support the same feature set.

Новые драйвера для LynxTWO/Lynx L22/Lynx AES16 (1 онлайн

Rogovich

New Member

Вышли новые драйвера для LynxTWO/Lynx L22/Lynx AES16.
Version 2 Build 14e от July 30, 2007

popedit

New Member

Скачали,поставили — некорректно работает. Откатили назад.
Сечас 1.30 build 057, dll и sys version идентичны.Прошивка 19.07.2005
Суть проблемы такая:
1.Линкс 2 не может поддерживать работу двух запущенных приложений(наприм.Samplitude и Audition).
То есть Винда второе открывает,но приложение кричит,что звуковое устройство занято.Это очень не хорошо.
Смешнее всего,когда аудишн запустил,потом сэм запускаешь — сэм не видит карты(вернее,он не может работать по ASIO).Ставит карту на WDM,но при попытке что-либо проиграть — зависает комп намертво.
Если наоборот сделать,сначала сэм,а потом аудишн,то машина зависает уже при загрузке аудишн.

2.Если работаю только с сэмом — то при выборе звукового фрагмента(поиск подложки или эффекта)- через ASIO вообще не активно окно прослушки, а через WDM — проигрывается пара-тройка файлов и опять намертво зависает комп.

Не подскажете — что делать?Как исправить эту ситуацию?

I-Gor-Ok

Member

Не подскажете — что делать?Как исправить эту ситуацию?
[/b]

Lynx one drivers windows 10

Version 1.0 Build 58K BETA March 3, 2020
1. Aurora(n)-TB, Aurora(n)-TB3, Hilo-TB, Hilo-TB3 now have the sample rate and sync source read from the device upon driver load so the device retains the sample rate and sync source, not the driver. This prevents a cable disconnection from overriding the sample rate or sync source stored on the device.
2. Lynx Mixer > Settings > Advanced > Adapter Settings > Channel Mode now controls the number of channels shown for a classic Aurora 8-TB where previously it was fixed at 16-channels. Channel Mode in Lynx Mixer for classic Aurora 8-TB now allows 2 thru 16-channels to be selected.

Version 1.0 Build 58J BETA February 17, 2020
1. Added support for DB-ADAT connected to LM-DIG inside Aurora(n).
2. Added NControl to driver package.
2.1 Supports DB-ADAT.
2.2 Fixes issue with Mic Pre not showing Gain when in Hi-Z mode.
2.3 Fixes issue with About box not showing driver version info properly.
3. Changed to “Packages.app” for installer to allow for notarization on Catalina.
4. Added register update after card info write to prevent streaming issues after an EEPROM write.
5. Saves Hardware Payload Size in EEPROM instead of MixerState.xml so it is restored properly if the device is plugged in or turned on after the Mac has started.
6. Lynx Mixer now shows and can select clock sources for LM-DIG and/or DB-ADAT with Firmware 1.21 on Aurora(n).
7. Changed smallest Hardware Payload Size when on “Auto” to 8 (from 4).
8. Added NControl 1.0.0 to driver installation package. NControl will be installed into the /Applications folder and will automatically be launched if the user launches Lynx Mixer with an Aurora(n)-TB3 (which doesn’t support Lynx Mixer).

Version 1.0 Build 58I BETA November 14, 2019
1. Fixed issue with CARDID read on driver load that might cause firmware updates to timeout.

Version 1.0 Build 58H BETA October 10, 2019
1. Fixed issue with Lynx Mixer not allowing mute changes for sources to anything other than Out 1&2 (introduced on 58G).

Version 1.0 Build 58G BETA September 20, 2019
1. Driver and all applications are 64-bit and notarized by Apple for Mojave (10.14) and Catalina (10.15) and up.
2. Changed interface for FWUpdate to 64-bit. Older versions of FWUpdate will no longer function.
3. Sample offset fixed for Aurora(n)-TB. Added one sample for play and one sample for record.
4. Now includes Hilo Remote 1.0.19.
4.1. Hilo Remote no longer automatically resizes the window based on the number of channels.
4.2. Added “Advanced” menu option of connection method is Thunderbolt which may contain the following menu options depending on hardware configuration:
4.2.1. Added “Adapter Settings” dialog to allow adapter settings previously only available with Lynx Mixer to be changed with Hilo Remote.
4.2.2. Please note: This setting is for advanced use and normally should never need to be changed by the end user. Added “Hardware Payload Size”. This should normally be left on “Auto” to allow the driver to determine the payload size (see note 5 below).
4.2.3. Please note: This setting is for advanced use and normally should never need to be changed by the end user. Added “Show PCIe DMA Completion Latency”. This option will temporarily display the PCI Express DMA completion latency on the toolbar while streaming. This setting is not saved so each launch of Hilo Remote will have this option unchecked. The latency value can be used in conjunction with the Settings > Advanced > Hardware Payload Size to insure glitch free streaming. The current maximum value will be displayed in both microseconds and samples (adjusted for the current sample rate). The Hardware Payload Size should always be double the worst-case latency number in samples. The software buffer size should always be a minimum of 4 times the Hardware Payload Size.
5. Changed how the Hardware Payload Size is automatically calculated. The default values are 8 samples for 44.1kHz and 48kHz; 16 for 88.2kHz and 96kHz; and 32 for 176.4kHz and 192kHz. If Advanced > Hardware Payload Size is set to “Auto”, each time the streaming is stopped, the driver evaluates the computers performance and may set a new default Hardware Payload Size if the driver based on the that performance measurement. This may result in either a higher Hardware Payload Size being selected, or a lower Hardware Payload Size depending on the speed of the computers PCIe DMA Completion Latency value.
6. In Lynx Mixer: Changed “Hardware Buffer Size” to “Hardware Payload Size” to keep it from being confused with the software buffer size. This should normally be left on “Auto” to allow the driver to determine the payload size (see note 5 above).
7. Please note: This setting is for advanced use and normally should never need to be changed by the end user. In Lynx Mixer: Added “Show PCIe DMA Completion Latency”. This option will temporarily display the PCI Express DMA completion latency on the toolbar while streaming. This setting is not saved so each launch of Lynx Mixer will have this option unchecked. The latency value can be used in conjunction with the Settings > Advanced > Hardware Payload Size to insure glitch free streaming. The current maximum value will be displayed in both microseconds and samples (adjusted for the current sample rate). The Hardware Payload Size should always be double the worst-case latency number in samples. The software buffer size should always be a minimum of 4 times the Hardware Payload Size.
8. In Lynx Mixer: Added the ability to change the Sync Source on the Aurora(n)-TB. Please note that Firmware 6.4 is required on the LT-TB for this to function properly.

Читайте также: Windows что такое маркет

Version 1.0 Build 58E BETA March 1, 2019
1. Driver and all applications are now notarized by Apple for Mojave (10.14) and up.
2. Changed name of Hilo with LT-TB from “LT-TB” to “Hilo-TB”.
3. All applications are now 64-bit to avoid warning on Mojave.
4. Transmit FIFO full check now performed for internal MIDI connection on LT-TB.
5. Sample offset fixed for LT-TB 5.5 firmware.

Version 1.0 Build 58D November 14, 2017
1. Added support for Aurora (n) with LM-DIG board.
2. Fixed issue for startup scene on certain configurations.
3. Driver now supports macOS 10.9 to macOS 10.14.

Version 1.0 Build 58C June 2, 2017
1. Added support for Aurora (n) -TB.

Version 1.0 Build 58B May 16, 2016
1. Added work-around for issue with DMAV2PLUS that would occasionally cause dropped samples on input.
2. Added support for fixed recording timing DMAV2PLUS firmware:
AES16e: 14.1
LT-TB: 6.2
E44/E22: 2.1
3. Added support for non-mixable integer format. This allows applications to bypass the Float32 to SignedInt32 conversion (which is bit-perfect, so there is no sonic difference either way).
4. Includes Hilo Remote Version 1.0.12.
5. Added new signing certificate for OS X 10.9 and up.
6. Driver now supports OS X 10.9 to OS X 10.11.

Version 1.0 Build 58 August 27, 2015
1. Added support for DMAV2PLUS for AES16e/LT-TB/E44/E22.
DMAV2PLUS supports the following features:
– Smaller transfer sizes to reduce latency to under 1ms round-trip (96kHz, 32 sample buffer)
DMAV2PLUS is supported with the following firmware:
AES16e: 14.0
LT-TB: 6.0
E44/E22: 2.0
2. Added new controls in Lynx Mixer to support DMAV2PLUS. Settings > Advanced > Hardware Buffer Size. This settings should be left at ‘Auto’ unless you are working with Lynx Technical Support on a specific issue. Changing this control sets the amount of audio buffered in the hardware. The smaller the number the faster the CPU must respond to interrupts before audio breaks up.
3. Includes Hilo Remote Version 1.0.11.