Mac os capitan патч

Как получить старые версии macOS

Если ваш компьютер Mac несовместим с последней версией macOS, можно перейти на более раннюю версию macOS, например: macOS Catalina, Mojave, High Sierra, Sierra или El Capitan.

Для получения новейшего функционала и поддержания безопасности, стабильности, совместимости и производительности компьютера Mac крайне важно поддерживать программное обеспечение в актуальном состоянии. Apple рекомендует использовать последнюю версию macOS, совместимую с вашим компьютером Mac.

Проверка совместимости

Версия macOS, входящая в комплект поставки компьютера Mac, является самой ранней версией, которую он поддерживает. Например, если на вашем компьютере Mac была установлена macOS Big Sur, вам не удастся установить macOS Catalina или более ранние версии.

Если версия macOS не может использоваться на компьютере Mac, приложение App Store или установщик сообщит вам об этом. Например, он может сообщить о несовместимости с данным устройством или что установщик устарел для открытия в этой версии macOS. Чтобы проверить совместимость до начала загрузки, проверьте минимальные требования к аппаратному обеспечению.

• Требования к аппаратному обеспечению macOS Catalina 10.15
• Требования к аппаратному обеспечению macOS Mojave 10.14
• Требования к аппаратному обеспечению macOS High Sierra 10.13
• Требования к аппаратному обеспечению macOS Sierra 10.12
• Требования к аппаратному обеспечению OS X El Capitan 10.11
• Требования к аппаратному обеспечению OS X Yosemite 10.10

Загрузка macOS на компьютер Mac с помощью Safari

Safari использует эти ссылки для поиска устаревших установщиков в App Store. После выполнения загрузки из App Store установщик открывается автоматически.

• macOS Catalina 10.15 обновляет Mojave, High Sierra, Sierra, El Capitan, Yosemite, Mavericks
• macOS Mojave 10.14 обновляет High Sierra, Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion
• macOS High Sierra 10.13 обновляет Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion

Safari загружает следующие более старые установщики в виде образа диска с именем InstallOS.dmg или InstallMacOSX.dmg. Откройте образ диска, затем откройте установщик .pkg из образа диска. Он устанавливает приложение с именем «Установить [ название версии ]». Чтобы начать установку операционной системы, откройте это приложение из папки «Программы».

• macOS Sierra 10.12 обновляет El Capitan, Yosemite, Mavericks, Mountain Lion или Lion
• OS X El Capitan 10.11 обновляет Yosemite, Mavericks, Mountain Lion, Lion или Snow Leopard
• OS X Yosemite 10.10обновляет Mavericks, Mountain Lion, Lion или Snow Leopard

Источник

OS X El Capitan on Unsupported Macs

macOS Extractor, OS X Patcher, and MacPostFactor are apps that guide you through patching and installing OS X El Capitan (10.11), Yosemite (10.10), Mavericks(10.9), or Mountain Lion (10.8) on your older Mac. This thread focuses on OS X El Capitan.

CAUTION:

ANY HARM OR DAMAGE CAUSED BY THIS GUIDE HAPPENED UNDER YOUR OWN RESPONSIBILITY! IF YOU HAVE ANY REGRETS ABOUT DOING THIS TO YOUR MAC, YOU PROBABLY SHOULDN’T DO IT. IF YOU ARE QUESTIONING WHETHER IT IS WORTH IT, YOU SHOULD PROBABLY NOT TRY THIS.
PLEASE READ THIS GUIDE BEFORE ASKING QUESTIONS. WE CAN NOT FULLY GUIDE YOU THROUGH THIS ‘ONE STEP’ AT A TIME. IF YOU CAN’T FIGURE YOUR WAY AROUND OS X, WE RECOMMEND NOT DOING THIS.

macOS Extractor

OS X Patcher

MacPostFactor

macOS Extractor Guide

Be sure to have root privileges (administrator password) as OS X will prompt you for this on some stage.

A: Preparing The Installation Drive

1. Make a BACKUP of your system if you can.
2. macOS Extractor has generally everything you need to patch OS X (There are also numerous other sources that can help).
3. Get an OS X El Capitan Installer app (Recommended from the Mac App Store)
4. Make sure your Mac meets the Requirements above
5. A USB or Secondary Partition to put the patched Installer (A Installation Drive for reference)

B: Start Patching

1. Install macOS Extractor.
2. There should be a new drive appearing on your Desktop called ‘Mac OS X Install ESD’. Don’t worry about that. The AutoPatch Tool will unmount that when its done.
3. Go to Applications/OS X Hackers Patch Files and run the AutoPatch package.
4. During the AutoPatch installation. Select the USB or partition (Installation Drive) that you want as the installer. (No, this is not the Mac OS X Install ESD) WARNING: DO NOT SELECT YOUR CURRENT PARTITION (i.e Macintosh HD)

C: Installation

1. reboot your Mac holding option (alt) key.
2. If the installation drive boots you back to the main partition, try blessing the drive from your terminal app:

3. select the Installation drive (and press enter)
4. when booted click install/continue until you reach the disk selection menu, select you main drive (probably Macintosh HD) if you are sure about it, else select another empty drive (at least 15GB for testing/bigger if it should be a secondary system)

D: If Reboot Fails

(If the Mac does not reboot to the El Capitan desktop boot to the installation drive again and perform the following.

open the terminal at the top menu bar or boot into single user mode (Hold Command -S immediately after turning on)

E: Install these 64 bit Kexts from the Kexts folder from macOS Extractor

1. Navigate in your Finder and go to the ‘OS X Hackers Patch Files’ folder in your Applications Folder
2. Open the ‘Kexts’ Folder
3. Choose your Graphics Card Kext Installer and launch it.
4. Select the Partition or Hard Drive that you are currently using the patched OS X. Install it. (Admin privileges required)
5. Restart your Mac

MacPostFactor Guide

IMPORTANT NOTES
Install MacPostFactor at your own risk. We are not liable if your computer explode, fail to wake you up for work, lose important files, pictures, porn or simply ceased to work. Always backup your existing installation before installing MacPostFactor or install in a second partition.
We are not aware of remaining bugs. Although its been thoroughly tested by us and our group of private beta testers, you might still find bugs in it, and if you do find one, feel free to contact us on Twitter @MLforAll & @IsiahJohnson15 or simply email me at [email protected] (@MLforAll’s mail) or go to the Support Page.

El Capitan Install is EXPERIMENTAL. Try this on a secondary partition.

Supplementary Informations for El Capitan

Requirements for MacPostFactor to work

◆ A Mac with Core 2 Duo or Xeon Processor.
◆ OS X 10.7 or later
◆ 2GB RAM at least
◆ At least 15GB of HDD space (8GB for USB)
◆ Install OS X El Capitan.app 10.11 or later in your Application Folder
◆ Read our instructions on MacRumors at least twice

We’re not responsible if you screw up your system. Technically, that won’t happen as you can always go back to Lion

Источник

El Capitan MBR Patch 10.11.6

1 Screenshot

• 

About This File

Patched OSInstall.mpkg and OSInstaller.framework to allow OS X 10.11 installation on MBR partition.

To use those patched files you must follow HowTo-10.11.x to create an USB installer. You can’t just run the app downloaded from Mac App Store.

The patch is made base on 落下爱@pcbeta 10.10.x patch method

How to make 10.11 installer for MBR?

Open /Applications/Install OS X El Capitan.app/Contents/SharedSupport/InstallESD.dmg/BaseSystem.dmg first.

1. Restore BaseSystem.dmg to HFS partition and rename the partition’s name as OSXMBR as /Volumes/OSXMBR/

2. Copy InstallESD.dmg/BaseSystem.dmg to /Volumes/OSXMBR/

3. Copy InstallESD.dmg/BaseSystem.chunklist to /Volumes/OSXMBR/

4. Copy InstallESD.dmg/AppleDiagnostics.dmg to /Volumes/OSXMBR/

5. Copy InstallESD.dmg/AppleDiagnostics.chunklist to /Volumes/OSXMBR/

6. Remove /Volumes/OSXMBR/System/Installation/Packages

7. Copy InstallESD.dmg/Packages to /Volumes/OSXMBR/System/Installation/Packages

OSInstall.mpkg replace to

OSInstaller replace to

9. Copy InstallESD.dmg/Packages/Essentials.pkg/System/Library/Kernels/kernel

(use Pacifist v3.2.14 to access the contents of Essentials.pkg, and make directory /System/Library/Kernels first.)

(Need kernel only if you use Chameleon with -f to boot the installer disk, needn’t with Clover.)

10. Boot to /Volumes/OSXMBR/ to install Mac OS X.

Источник

OS X El Capitan on Unsupported Macs

TMRJIJ

macrumors 68040

OS X El Capitan (10.11) on Unsupported Macs

macOS Extractor and MacPostFactor are apps that guide you through patching and installing OS X El Capitan (10.11), Yosemite (10.10), Mavericks (10.9), or Mountain Lion (10.8) on your older Mac. This thread focuses on OS X El Capitan.

MacPostFactor works for Mountain Lion, Mavericks, Yosemite, and El Capitan.
Please note that older GPU (GMA 950, X3100, X1600, X1300, X1900, 7300gt, etc.) Graphics Acceleration on Mavericks, Yosemite, and El Capitan are not supported yet.
Installing on these models may cause them to have graphical issues as stated in these pages. Kexts are provided to help a little bit.
macOS Extractor is somewhat for more advanced users and should only be used as an alternative to MacPostFactor. This thread consists of members prominent in these patches that can help you solve your issues. Please do not hesitate to post if you have questions.

OS X 10.6 Snow Leopard was the first OS X version with optional support for a 64-bit kernel, allowing booting either with a 32-bit or 64-bit kernel. However, Apple did not support booting the 64-bit kernel in Macs that shipped with EFI32 firmware, even if they had 64-bit processors capable of running the 64-bit kernel. When Apple dropped the 32-bit kernel entirely from OS X, starting with OS X 10.8 Mountain Lion, EFI32 Macs no longer had an Apple-supported mechanism to boot newer OS X versions.
OS X 10.11 El Capitan includes rootless security. It makes sure that System file permissions are automatically protected, and updated during Software Updates. The Repair Permissions function is no longer available and access to system files that we need to use in this guide may be locked.

Fortunately, we have found workarounds for this version of OS X. Here we provide guides in Post 1 in support for Installing OS X El Capitan on your Unsupported Mac.

This first post is usually updated with recently summarized information, updates, and more solutions.

For those who have 2006/2007 Mac Pros, you may be best suited to using Mr. Zarniwoop’s Guide here. The MCPF and macOSE projects are not affiliated with them. We will not contact them for you either, that’s your responsibility. Some confrontation has occurred both publicly and privately in MacRumors, the site, and other forms of communications and we don’t want anything to do with them and their Mac Models. It’s simple, don’t ask Mac Pro questions to people who don’t have Mac Pros. Your post will be requested to be moved to their thread.

Prerequisites:
Tested Macs listed below. Here are the minimum requirements:
— Running 10.7 Lion
— At least 2GB of RAM
— A copy of the OS X El Capitan Installer in Applications Folder (.app file from Mac App Store preferred)
— 15 GB of free space from USB or HDD Partition to serve as your Installer Drive.

-MacBook2,x
-MacBook3,x
-MacBook4,x
-MacBookPro2,x
-MacBookAir1,1
-MacMini1,x with C2D
-MacMini2,x
-iMac4,x with C2D
-iMac5,x

We DON’T assist with Hackintosh. All private messages/emails involving installing OS X on non-Apple hardware will be redirected to another support team.

Guide to Installing OS X El Capitan on Unsupported Macs

ANY HARM OR DAMAGE CAUSED BY THIS GUIDE HAPPENED UNDER YOUR OWN RESPONSIBILITY!

Be sure to have root privileges (administrator password) as OS X will prompt you for this on some stage.

A: Preparing The Installation Drive

1. Make a BACKUP of your system if you can.
2. macOS Extractor has generally everything you need to patch OS X (There are also numerous other sources that can help).
3. Get an OS X El Capitan Installer App (Recommended from the Mac App Store)
4. Make sure your Mac meets the minimum requirement above
5. A USB or Secondary Partition to put the patched Installer (A Installation Drive for reference)

B: Start Patching

1. Install macOS Extractor.
2. A new drive might appear on your Desktop called ‘OS X Install ESD’. Don’t worry about that. The AutoPatch Tool will unmount that when it’s done.
3. Go to Applications/OS X Hackers Patch Files and run the AutoPatch package.
4. During the AutoPatch installation. Select the USB or partition you want to use as your Installer Drive that you want as the installer. (No, this is not the Mac OS X Install ESD) WARNING: DO NOT SELECT YOUR CURRENT PARTITION (i.e Macintosh HD)
5. Once the installation is completed, turn off and restart your Mac holding the option key.

C: Installation

1. Reboot your Mac holding option (alt) key
2. Select the Installation drive «OS X Base System» (and press enter)
3. If the Installation Drive boots you back to the main partition, try blessing the drive from your terminal app:

   D: If Reboot Fails

   If the Mac does not reboot to the El Capitan desktop, boot to the installation drive again and perform the following.
   Boot back into the El Capitan Install Partition, open the terminal at the top menu bar or boot into single-user mode (hold Command-S immediately after turning on) enter:

   E: Installing the 64bit-Kexts from the Kexts folder from macOS Extractor
   (These will better the graphics by a little but you will not have Graphics Acceleration. Still in beta so they may not work well)

   1. ensure that the System Integrity Protection is disabled
   2. Navigate in your Finder and go to the ‘OS X Hackers Patch Files’ folder in your Applications Folder
   3. Open the ‘Kexts’ Folder
   4. Choose your Graphics Card Kext Installer and launch it.
   5. Select the Partition or Hard Drive that you are currently using the patched OS X.Install it. (Admin privileges required)
   6. Restart your Mac

   IF your Macbook can’t wake up from sleep:

   Because of the lack of working Graphics Acceleration. Your MacBook may not be able to wake from a display sleep

   Install the NoSleep Extension
   Set the Preferences to Never Sleep on AC Adapter and Battery
   Check the ‘Start NoSleep Utility on system startup’ setting
   Your Macbook screen will never turn off unless you actually shut down your Macbook.

   El Capitan Install is EXPERIMENTAL. Try this on a secondary partition.

   El Capitan can be installed on all computer but ONLY Mac Pros WITH AN UPGRADED GRAPHICS CARD can use graphics acceleration as of now!

   Requirements for MacPostFactor to work

   • A Mac with Core 2 Duo or Xeon Processor.
   • OS X 10.6 or later
   • 2GB RAM at least
   • At least 20GB of HDD space (8GB for USB)
   • Install OS X El Capitan.app with beta 1 or later in your Application Folder
   • Read our instructions on MacRumors at least twice

   Friendly reminder.

   We’re not responsible if you screw up your system. Technically, that won’t happen as you can always go back to Lion, Mountain Lion, Mavericks or Yosemite

   Instructions — Installing directly on this computer

   1. Make sure you have Install OS X El Capitan.app in your Application Folder
   2. Select «On this computer» on the main MCPF window. Then, choose the partition you want to install El Capitan on.
   3. Click install and prompt your password.
   4. Click reboot. Your computer should reboot with the OSXHackers logo.
   5. Once booted, Click Continue, Agree and choose the only partition showed.
   6. Click reboot when you see «Installation succeeded!».
   7. Enjoy!

   Instructions — Installing via USB

   1. Make sure you have Install OS X El Capitan.app in your Application Folder
   2. Select «On an external drive» on the main MCPF window. Then, choose the disk you want to install the El Capitan installer on.
   3. Click install and prompt your password.
   4. Click exit. Boot the computer you want to install El Capitan on with ‘alt’ held and select your USB drive.
   5. Once booted, Click Continue, Agree and choose the partition you want to install El Capitan on.
   6. Click reboot when you see «Installation succeeded !».
   7. Enjoy!

   OS X Recovery Patch

   • Go to Applications/OS X Hackers Patch Files/Recovery Patcher/
   • Install the ‘Recovery Patcher’ pkg (Not working for El Capitan)

   OS X Software Updates

   • Go to Applications/OS X Hackers Patch Files/Software Update Patch/
   • Install the ‘Software Update Patch’ pkg
   • (EFI32 Mac only) Using Pike’s Boot.efi, Install the EFI Daemon patch.

   Animation Disabler

   You don’t have Graphics Acceleration, right? Then you don’t need excess Animation slowing down your system.

   • Go to Applications/OS X Hackers Patch Files/Animation Disabler/
   • Install the ‘Disable Graphical Animations’ pkg

   Airdrop

   • Go to Applications/OS X Hackers Patch Files/AirDrop Enabler/
   • Open the ‘Enable Airdrop’ shell script in the Terminal
   • Restart

   You can send a file with AirDrop to other Macs only. Sometimes newer Macs can’t find your model.

   Try this method on an external HDD. The method has been updated to v3 and successfully tested on MB 2,x, MB3,x and MBP 2,x. It can work on eventually all the other EFI32/EFI64 unsupported Macs if you have the kexts you need, although method 3 v3 is recommended for EFI32 Macs; and method 3 v2 in post #926 is recommended for EFI64 Macs.
   Note: You can find the method 3 v1 in post #892 of this same thread, but it’s obsolete

   Prerequisites: A computer with El Capitan installed and SIP disabled (or a computer with Yosemite and -no_compat_check kext-dev-mode=1 boot flags in /Library/Preferences/SystemConfiguration/com.apple.Boot.plist), and an external HDD.

   1- First of all, you need an external 2,5” HDD or SSD. It has to be GUID HFS+ formatted. If you format it from El Capitan, it formats the hard disk in this way by default. I will suppose its name is «Capitan». This will create an HFS+ partition and an EFI partition automatically.

   2- Using the computer with El Capitan/Yosemite installed, clone the partition where you have El Capitan to your external HDD, the one you have formatted on step 1. The source computer can be a real Mac or even a Hackintosh. You can use Carbon Copy Clone (CCC) or SuperDuper! I have used both of them and they worked well.
   If you use El Capitan, you need SIP disabled. To do that, boot from your El Capitan Mac from Recovery Partition, go to utilities, open a terminal, and write csrutil disable and reboot. You need to do all the next steps from an El Capitan with SIP disabled. Yosemite doesn’t need this, because it doesn’t have SIP.

   3- Boot.efi we need. There are two possibilities:
   If you have an EFI64 unsupported Mac (like MB4,1, for example), you can use the EFI64 boot.efi El Capitan has got by default. You should follow, as mentioned, method 3 v2.

   If you have an EFI32 Mac, you need this boot.efi, designed to always disable SIP, created by @skyfly555, taking as base the boot.efi created by @vsbalint70, who created his boot.efi modifying the code from Pike R Alpha original boot.efi.

   Once downloaded, we need to change flags. From terminal (remember I’m supposing your Capitan partition is called «Capitann»):

   4- From Finder, use the «Go» menu and select «Go to folder. »
   Open /Volumes/Capitan/System/Library/CoreServices/ and copy there the EFI32 boot.efi from where you have it (probably your Downloads folder).
   Important: If you find here a file called firmware.scap, you must delete it and empty trash.
   Open /Volumes/Capitann/usr/standalone/i386/ and do the same.
   Important: If you find here a file called firmware.scap, too, you must delete it and empty trash.

   We will assign the correct owner to them. From terminal:

   5- We need kexts. We are using tones of kext from TMRJIJ — OS X Hackers. To make things easy, you have them all zipped here (all the kexts come from OS X Hackers). Download it, unzip the file, you will get some folders and one kext, copy the kexts you need (EC-Base-kexts are mandatory, LegacyUSBInjector.kext is optional and is used only if you have some known USB issues, copy the graphical kexts you need from its folder) into /Volumes/Capitann/System/Library/Extensions/ .

   Note 1: If you have cloned from a Hackintosh, check your kexts into /Volumes/Capitan/System/Library/Extensions/ and /Volumes/Capitann/Library/Extensions/. Maybe you have things you don’t need. Some of them can give you problems, for example, AppleACPIPS2Nub.kext, ApplePS2Controller.kext, FakeSMC.kext, NullCPUPowerManagement.kext or some HDAEnablerx.kext or whatever, that is «very Hackintosh». If you have these kexts in these folders, remove them now.
   Note 2: If you have an ATI graphics card, to get the 128 MB of RAM recognized, you have to go into /Volumes/Capitan/System/Library/Extensions/ and delete this file: AMDSupport.kext

   6- Before doing step 7, you need to be sure you have an important folder, which is not always cloned.

   Open in Finder /Volumes/Capitann/System/Library/Caches/ Do you have com.apple.kext.caches/ folder?
   If not, open /System/Library/Caches/ in another window of the finder, and drag and drop com.apple.kext.caches/ from /System/Library/Caches/ to /Volumes/Capitann/System/Library/Caches/ .

   After that, open a terminal and:

   Note: If you don’t have com.apple.kext.caches/ , in step 9 you can get a message like:
   Can’t create /Volumes/Capitann/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.l9a9 — No such file or directory and El Capitan won’t boot.

   7- Now we will set boot flags and use them every time we boot. From terminal:

   You will see:
   Kernel Flags

   You want to have:
   Kernel Flags
   -no_compat_check kext-dev-mode=1 mbasd=1

   Or, if you want verbose mode, too, add -v flag:
   Kernel Flags
   -no_compat_check kext-dev-mode=1 mbasd=1 -v

   Note: we need these flags, they are mandatory to have all the kexts loaded, excepting mbasd=1, that is only required by MBAirs.

   To go out from nano editor, Ctrl+X and say «y».

   8- Now we want to have our kexts permissions in good condition. From terminal:

   from the terminal and be sure you see root:wheel everywhere. If that’s not the case, you need to go to Finder, select your external HDD, and tick/untick the option «Ignore ownership on this volume» (Right-click on volume > Read info > Option below permissions) — if it’s ticked, untick it; if it’s unticked, ticked it. Although when you get your permissions changed to root:wheel, you need the «Ignore ownership on this volume» option unticked.

   9- Now we are going to build the prelinked kernel and kernelcache:

   The terminal should give you messages like these:
   /Volumes/Capitan locked; waiting for the lock.
   Lock acquired; proceeding.
   kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext IOUSBHostFamily.kext
   (. )
   kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleStorageDrivers.kext
   kext-dev-mode allowing invalid signature -67050 0xFFFFFFFFFFFEFA16 for kext AppleIntelIntegratedFramebuffer.kext
   kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleIntelGMA950.kext
   (. )
   AppleDataSetManagement.kext — dependency for com.apple.iokit.IOAHCIBlockStorage lacks valid OSBundleCompatibleVersion.
   AppleDataSetManagement.kext is missing dependencies (including anyway; dependencies may be available from elsewhere)
   Created mkext archive /Volumes/Capitann/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.
   Note 1: AppleDataSetManagement.kext messages will be shown if you have an SSD and TRIM enabled.
   Note 2: If you get messages saying permissions are not correct, or omitting. repeat steps 5, 6 and 8 until you get these messages saying «kext-dev-mode allowing invalid signature..». Be sure you are doing all the steps (especially the terminal commands) correct, and in the correct order. If you have an ATI and have deleted AMDSupport.kext, you will get some «omitting from prelinked. » messages, it’s ok.
   Note 3: If you get a message saying «Can’t create. «, do step 6 again, it hasn’t been done.

   Note 4: if you are on a Hackintosh, you can get messages like:
   SoftRAID.kext has incorrect permissions; omitting.
   (. )
   ACS6x.kext has incorrect permissions; omitting.
   Some of these kexts are from Hackintosh and will not be needed. Other ones, like HandsOff.kext, can be from some app you have installed. Be sure you are not omitting something important, as the kexts the prior command has loaded (AppleHDA.kext or similar), and don’t care for the rest.

   10- Now we can change flags to boot.efi, and protect it again. From terminal:

   Now go into /Volumes/ESP from Finder (maybe it will be called EFI on Finder sidebar). Go into the folder called EFI. Delete everything inside this EFI folder (/Volumes/ESP/efi/) and empty trash. If you see an Apple folder, you have the firmware.scap there, you must delete it!

   USB Issue: The USB kexts we are using could give you trouble, depending on the machine you have. One USB could not be recognized, Check your USB ports using a USB memory stick after booting El Cap for the very first time to know if you are affected by this issue. If this is the case, try leaving the USB stick in the not recognized port, reboot again, and check if, after rebooting, the USB stick is recognized. If it’s recognized, you will have to boot El Cap with some USB device connected on that USB port when booting to have it working with El Cap (not all the time, only while you are booting). You can try installing LegacyUSBInjector.kext, maybe it can help you.
   Brightness adjustment: Shady app can help you. It’s included in the OS X Hackers graphical kexts installers.

   12- Boot your Mac, pressing the «alt» key» and select Capitann partition. If you have followed all the steps, it will boot.

   13- The final check.
   Once booted from El Cap on your unsupported Mac, open a terminal and type:

   You should see the same output you got when you did step 9.
   Great. You got it. Welcome to EC.

   Important notes about updating-upgrading and cloning:
   1- If you do a major upgrade, for example, from El Cap 10.11.5 to 10.11.6 or similar, you will get all the kexts we added to /System/Library/Extensions in step 5 deleted, boot.efi deleted the firmware.scap file will reappear everywhere. So, I recommend you having a bootable backup on an external HDD before upgrading anything, and be sure it boots correctly; so, after the upgrade, you can boot from there and repeat the process, from steps 3 to 12.
   Your three goals: reinstalling the correct boot.efi, reinstalling kexts with the correct kext cache and prelinked kernel rebuilding, and deleting firmware.scap from your system again.
   So, and basically, you will repeat m3v2, but not with another machine, but with yours.
   2- When you clone El Cap partition to your internal HDD, El Cap may not boot. If this is your case, do steps 6 and 9 booting from your external drive. Then, your internal El Cap will boot.

   Feel free to post your questions, concerns, or success stories in this thread. If you can’t post us back because your only usable device is bricked, Skype at TMRJIJ, MLforAll, or email us at Support@OSXHackers.net. We’ll try to respond within 3-5 days.
   There should be some great support Applications that we will use to help you.

   Be sure to thank our awesome developers who have contributed greatly.

   Support Documentation (Construction)

   Docs for macOS Extractor:

   • No Sound Fix
   • Installation Failed
   • Updating macOS Extractor
   • Disabling Animations (Mavericks and Yosemite)
   • Enabling AirDrop
   • OS X Software Updates
   • Recovery Patch

   Docs for MacPostFactor:

   • Error Code References
   • Error Code 3 — Partition Issue
   • Graphics Lag
   • Re-patching
   • Enabling AirDrop
   • Disabling Animations (Mavericks and Yosemite)

   Downloads/Files for Patching

   The macOS Extractor v1.45 for OS X/macOS 10.8 — 10.14 [March 31, 2020]:
   Download Link
   View Release Notes

   MacPostFactor 2.0.1 [July 8, 2016]:
   Download Link

   Boot.efi support for El Capitan (OS X 10.11) for unsupported Mac hardware with a 32-bit only EFI [by Pike R. Alpha]:
   Download Link

   OS X Hackers are is not affiliated with Apple Inc. Mac OS Ten (X), Mac, iOS, iPhone, iPad, and all other Apple product names are trademarks or registered trademarks of Apple Inc. All other company and product names are trademarks or registered trademarks of their respective companies.
   MacPostFactor was made by Wayne Wong (@Wayne_819) and Kelian Dumarais (@MLforAll)

   Guide and OSXH site/app designed by Isiah Johnson (@TMRJIJ) and Robby Sharpero and is provided by Johnson Network.

   Support us by sharing our guide to others. Let everyone know that their older Macs are not obsolete yet. Thank the developers who helped make this possible. Some Developers also appreciate donations to help make this site/app better.

   Источник

   Читайте также:  Срок действия вашей лицензии windows истек как убрать сообщение